How to screen capture windows 7 via parallels using 27" iMac

How to screen capture windows 7 via parallels using 27" iMac

Just like you would with a Mac. Command shift 3 captures the whole screen to yourMac desktop and command shift 4 will capture a selection to the Mac desktop.

Similar Messages

  • How can I install Windows 8.1 using a USB Pen Drive in Late 2011 Macbook Pro with DVD R/W given.

    How can I install Windows 8.1 using a USB Pen Drive in Late 2011 Macbook Pro with DVD R/W given.
    I have Boot Camp 5.1.2 (497) and there is no option for installing using USB. I have downloaded an image of Windows 8.1 already.
    I can't install using DVD R/W because it's not working.
    Please help me.
    Thank you.

    unlocked by myself
    thanks

  • HOW DO I OPEN WINDOWS XP ON MY NEW IMAC TO USE A WINDOWS BASED SOFTWARE?

    HOW DO I OPEN WINDOWS XP ON MY NEW IMAC TO USE A WINDOWS BASED SOFTWARE?

    Assuming you already have it installed: Go to system preferences and chose 'start up disc' in the system menu. Then select the Windoze partition and restart it. - To get back to OSX, find the Boot Camp icon in the tool bar bottom right.

  • How can I start windows 8 without useing my password

    how can I start windows 8 without useing my password

    Hi,
    Review the information posted in this thread.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • How to close parent window when we use call method l_window_manager- create

    hi...
    how to close parent window when we use call method l_window_manager->create_external_window
    thank you.

    hi
    good
    go through this link,hope this ll help you to solve your problem
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/63a47dd9-0b01-0010-3d8e-de27242bf011
    thanks
    mrutyun^

  • HT1338 Is there any way I can capture video of myself using the iMac built-in camera?

    I would like to do a self-interview for use in a movie project. Can I capture video of myself using my iMac built-in camera? Is there an app somewhere that allows me to do this?

    Use Photo Booth - and select the "film clip" icon at the lower left of the window.

  • How to screen capture in Mac OS

    Can anyone advised me how to do screen capture please? Thanks.

    Hi joengz!
    Command-Shift-3: Take a picture of the screen
    Command-Shift-4: Take a picture of the selection
    Command-Shift-4, then press Control while selecting: Take a picture of the screen, place in Clipboard
    Command-Shift-4, then Spacebar: Take a picture of the selected window
    Additional instructions, that can be found in Mac Help.
    "To take a picture of the whole screen, press Command-Shift-3.
    To take a picture of part of the screen, press Command-Shift-4, then drag to select the area you want
    in the picture.
    To take a picture of a window, the menu bar, the Dock, or other area, press Command-Shift-4, then
    press the Space bar. Move the pointer over the area you want so that it's highlighted, then click. (If you
    decide you want to drag to select the area, press the Space bar again.)
    If you press Command-Shift-4 and decide you don't want to take the screen shot, press the Escape
    key.
    Screen shots are saved as PDF files on the desktop. If you want to put the screen shot in the Clipboard,
    rather than create a file, hold down the Control key when you press the other keys. You can then paste
    the picture into a document."
    "You can also take pictures of the screen using the Grab application (in the Utilities folder)."
    ali b

  • How to screen capture on asha 311

    I've seen forumers with screen captures of some windows on asha 311.
    how did they do it ?
    or is it possible to screen capture on asha 311?
    Nokia Lover since childhood.
    my phones are 3120c, 303, and 311.
    Solved!
    Go to Solution.

    One "workaround" way would be to e.g. to go to RDA and use one of those devices to grab the screenshots. Depends on what do you need the screenshots for.
    http://www.microsoft.com/en/mobile/nokia-x-updates/
    http://www.microsoft.com/en/mobile/nokia-x2-update/
    http://www.microsoft.com/en/mobile/asha-software-update/
    http://www.microsoft.com/en/mobile/support/software-update/wp8-software-update/
    http://www.developer.nokia.com/Community/Wiki/Nokia_firmware_change_logs
    https://twitter.com/LumiaSWUpdates

  • D20 Blue Screen loading Windows 7-64bit using Intel controller and Marvell enabled

    Hi, Help,
    Hardware:
    D20, 4158, Four 500GB Seagate SATA drives configured as a RAID10 1TB virtual disk (partitioned into five logical drives).
    Goal:
    Recover or repair a degraded RAID array.
    I want to be able to launch Windows 7-64bit using the Intel controller and have it access the virtual disk of the degraded RAID array attached to the Marvell controller.  Subsequently, I want to use the Marvell MRU utility to repair/recover the situation.
    Situation/Issue:
    Things ran well for two years and two months until yesterday.  Now, when booting I see:
    1962: No operating system found. Press F1 to repeat boot sequence.
    If I use the Windows 7 installation CD and load the Marvell driver, the attempt to recover the operating system reports that the MBR is corrupt and cannot be repaired.
    If I boot with the Marvell controller disabled in the D20 BIOS, using a Windows 7 installation (with Marvell drivers) attached to the Intel controller, everything works except (of course) I cannot access the RAID drives.
    If I reboot with the Marvell controller enabled, using the same Windows 7 installation via Intel controller, I see a "Starting Windows" announcement followed by a flash of the blue screen of death.
    The BSOD message is unspecific, no error code, just...
    "A problem has been detected and Windows has been shut down to prevent damage to your computer.
    If this is the first time you've seen this Stop error screen,
    restart your computer..."
    Additional information:
    If I access the Marvell BIOS (ctrl-M) and look at Devices, one of the four Seagate drives has status FREE instead of status ASSIGNED.  If I run the Marvell BIOS verify disk utility diagnosic on that FREE status disk, I get a fault error after about 30 minutes of scanning.  So, one Seagate disk is sour and somehow the MBR was corrupted at the same time.
    History:
    Two years ago, during the intial configuration, I could access the Marvell RAID disks from this Intel-controller-booted Windows 7 installation, but my fuzzy memory is that I had to change something in the D20 BIOS, such as the AHCI setting or similar.
    Status:
    Today, using the Intel controller to boot Windows 7 with the Marvell controller enabled is just BSOD.  What am I missing or failing to do or set?
    Thank you in advance for any help and ideas.
      -John
    Solved!
    Go to Solution.

    Update:
    I replaced the 500GB Seagate disk with a new 500GB Seagate.  I ran the Marvell BIOS verify disk utility on the new disk drive and it passed with no errors.  Following the steps given in the Marvell MRU online help, I rebuilt the virtual disk.  Upon completion (which took a little more than an hour to complete), I rebooted.  Before the Seagate disk went south yesterday, the Marvell virtual disk contained one primary partition (C, and four NTFS drives (D:, E:, F:, and Z.  Now it contains three primary NTFS drives (C:, F:, and Z.  An extended partition contains D: (an unformatted volume of size 199.30MB) and an unused space of 199.30GB.
    Event log:
    Looking at the event log, Windows reports that the disk in question raised a warning yesterday.  Three messages share the same timestamp (all from mv64xx (a Marvell process):
    "Physical disk 16 is plugged out."
    "Virtual disk 0 is degraded."
    "Physical disk 16 is plugged in."
    Eight seconds later, UserPnp logs:
    "Driver Management has concluded the process to add Service disk for Device Instance ID SCSI\DISK&VEN_SEAGATE&PROD_ST3500418AS&REV_CC38\5&248BBE23&0&000100 with the following status: 0"
    One second later, UserPnp logs:
    "Driver Management concluded the process to install driver FileRepository\disk.inf_amd64_neutral_10ce25bbc5a9cc43\disk.inf for Device Instance ID SCSI\DISK&VEN_SEAGATE&PROD_ST3500418AS&REV_CC38\5&248BBE23&0&000100 with the following status: 0x0."
    Questions:
    Is it possible that UserPnp corrupted the Marvell virtual disk after an intermittent physical disk unplugged/plugged-in event that happened when the Seagate hardware went failed.  It looks to me like my D: and E: are toast despite RAID 10.
    Any ideas?  Is there anyway to recover the Marvell virtual disk configuration to the state prior to the hardware failure?  If not, what good is RAID 10?
    My apologies for the long posting, but I am an old software guy who does not understand the intricacies of RAID and disk management.
    Thank you in advance for any leads toward a solution,
      -John

  • How to screen capture?

    using win XP on a Dell Inspiron 6400 which I am borrowing..
    How do I do a screen capture, and a cropped one as well?
    The print screen button on the keyboard isn't helping.
    mots appreciative

    A few screen capture extensions:
    *Abduction!: https://addons.mozilla.org/firefox/addon/3408
    *FireShot: https://addons.mozilla.org/firefox/addon/5648
    *Pixlr Grabber: https://addons.mozilla.org/firefox/addon/9924/
    *Screenshot Pimp: https://addons.mozilla.org/firefox/addon/12985
    *Screengrab: https://addons.mozilla.org/firefox/addon/1146

  • How to screen capture a computer video game being played??

    Need a small clip of a kid playing a rather fast moving video game. Is there a way to capture that and then use it in FCP??
    Thanks
    John

    The kid capture is no problem. I have plenty of cameras and will be able to map the screen capture onto a 3d computer monitor. Only thing I did not know how to do was how to capture the video and get it into a quicktime or .avi format.
    Thanks
    John

  • How to install windows for Parallels install in iMac?

    I have an iMac.  I have the program Parallels Destop 8 for Mac.  I have a Windows XP Home Edition disk and a Windows Vista upgrade disk.
    How do I install Windows?
    I have tried from installing the Parallels program and it is saying there is not a version of Windows installed.  DUH!  That is what I am trying to do.
    Please help.  I am just trying to get a Creative Memories Scrapbooking program to work so that I can make my darn family albums!  UGH!!!
    Thanks to anyone who can help me out.

    http://kb.parallels.com/en/4729
    If you have further questions about setting up Parallels, you'll be most likely to get help if you ask in their forums:
    http://forum.parallels.com/forumdisplay.php?f=58
    Regards.

  • Screen capture of Tektronix MSO4104B using LabVIEW

    I am trying to acquire a screen capture from a Tektronix MSO4104B oscilloscope using LabVIEW. I currently am able to collect data from the device, and have a waveform displayed on my VI front panel. However for various reasons, our preference is to capture the actual screen shot from the scope.
    I have reviewed the programmers reference for this device, and have made countless searches on Google for an answer, but haven't been able to find a solution. It appears that a few people have been able to accomplish this on OTHER Tek scopes by sending a hardcopy through the communications port (GPIB, USB, Ethernet, etc...) however according to the programmers reference for this particular device, it appears that it will only send a hard copy to an installed printer, rather than simply as a data stream to the port that can be read using VISA commands.
    The other solution I have seen is to save the screen shot to a flash drive, then copy the file through the port to the PC. However, neither of these solutions seem to be available on this device...this is one of the most advanced scopes that Tek makes...I can't believe this is so difficult!? Please help!
    Solved!
    Go to Solution.

    I used a TDS3000 series scope from Tek and had success using the Hardcopy command.  Note that I used the GPIB.  Here are the commands I used.
    HARDC:PORT GPIB;
    HARDC:INKS ON;
    HARDC:FORM PNG;
    HARDC START
     I also had fun because I had to recieve the data in chunks since an entire png file could not be transfered in one chunk due to buffer limitations.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Attachments:
    tek screen capture.png ‏19 KB

  • Black screen during windows 7 install on 27inch iMac

    My iMac turns to a black screen during windows 7 boot camp install. I can use the install disk on my wifes Macbook Pro so I know that the media is good.

    Please re-post in the Boot Camp forum.

  • How do I install MS Office 2011 in Windows via Parallels Desktop?

    I just installed Parallels and Windows8. I need to install my MS Office on my parallels since I need to use Word/Excel most of the time in Parallels.
    Pls help. Thank you!

    Microsoft Office 2011 is a Mac OS X-only product and can't be run in Windows.
    (74483)

Maybe you are looking for