Scrollable frame in MSO v18

Hello all
I have updated to V18 and one of the new feature was to enable scrollable content in MSO
Wich I try, several time, It works will in the desktop preview but on the Ipad the scrollable text dissapear..... I can just see the scrollable bar..... the text gone
Any idea?

I'm having the same issues, my text disappears in the ipad but shows up fine on ACV.

Similar Messages

  • Scrollable frame is text: anchored object in text can not be button?

    Following example: A textframe. With an anchored object (group). Paste textframe in other frame to make scrollable frame (pan only). Select anchored frame in already pasted into textframe, make button for anchored object (go to state).
    Does not work, button does nothing (and yes a converted it to a button after the paste into other frame as last step).
    Not possible?
    DPS v18

    If you want the button in the scrollable frame to control an MSO state, the button/scrollable frame needs to be part of the MSO. It is an InDesign limitation that buttons cannot control videos, audio clips, or MSOs unless they're on the same "level" in the document.

  • Problem with V19 Scrollable Frame

    I have a magazine that worked find on V18 of producer tools, since I upgraded to V19 I am having ptoblems.
    I have a standard page size 2048x1536 (iPad 3), and I have the whole page set as a scrollable frame with a background placed behind it. Then all my content for the page is pasted into the scrollable frame which runs much lower than the 2048 page length. You can then scroll the page within the scrollable frame rather than having a long page to scroll down. This also creates a nice layering effect where the content moves on top of a static background.
    This worked fine for me on V18 producer tools, but now when I load my magazine onto my iPad, I'm scrolling through articles and when I hit the page with the scrollable frame you can no longer scroll left or right and you're stuck on the page...
    Any idea how I can fix this as I have a client that has seen and likes the layering effect? Last thing I want to do is have to remove it and just make a long page.

    Which totally sucks, BTW.
    If you use JPG or PNG then it works but you lose the razor sharp text and pinch and zoom that PDF provides.
    I really don't get this one, either. Especially since the scrollable frames option gives you the ability to make it vertical only. That should eliminate any "confusion" as to which way to you want to scroll and which way you want to swipe.
    Bob

  • Scrollable frames. Buttons not working.

    Hello.
    I have a problem with buttons in the scrollable frames.
    I have a slideshow with a thumb's. Each thumb consist of MSO (non active icon and active icon) and clear frame - button to that MSO and to slide foto. The thumb's grouped and placed into the frame with horizontal scroll overlay effect.
    That frame placed into another frame-pull out tab, which have vertical scroll effect. And when I pressed the button, slide fotos changes correctly, but button MSO not working.
    See files from dropbox --  https://www.dropbox.com/sh/rsbf1jto3a39jug/IVcQxaYJOW
    Sorry for my english. I need help very much.
    Thanks.

    Hi,
    I understand that I can use two 'states'  of the buttons. And I tried it. But. Buttons renditions are raster images. And on the retina display we had bad quality. My target was to create vector buttons. With good quality on both displays.
    Any suggestions?
    04.10.2013, в 12:03, Christophe_Quinzoni <[email protected]> написал(а):
    Re: Scrollable frames. Buttons not working.
    created by Christophe_Quinzoni in Digital Publishing Suite - View the full discussion
    Hi (again),
    It seems that you built your stuff in a very complicated way.
    First, try to make simple!
    You mixed MSO and buttons functions. Useless and unfonctional.
    Yous should use only button panel, with two different 'states' ('Normal' and 'Clic').
    See below (no MSO function used at all for the button):
    http://forums.adobe.com/servlet/JiveServlet/downloadImage/2-5735625-468602/445-605/Button_ 1.jpg http://forums.adobe.com/servlet/JiveServlet/downloadImage/2-5735625-468603/448-605/Button_ 2.jpg
    Use the layer panel to easily select the objects you want to modify.
    Please find your file here: https://dl.dropboxusercontent.com/u/46115208/slideshowButton.indd
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5735625#5735625
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5735625#5735625
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5735625#5735625. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Digital Publishing Suite at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • BUGS: stop at last image and scrollable frames

    Hey,
    I think I've identified two bugs in the latest release:
    1) MSO slideshows that have Autoplay checked, don't respect the "Stop at last image" option, and return to the first stage regardless. This behavior only occures some of the times, and I am not certain what makes it happen. I think it may only happen with slideshows in which are configured to be exported in vector format.
    2) Scrollable boxes that are configured to be vertically scrollable only, are also horizontally scrollable, if the content of the scrollable box exeeds the horizontal limits of the scrollable frame.
    Did anyone else expirience these bugs? Any workarounds or fixes?
    Thanks

    Doesn’t anyone bother to read?
    I’m sorry, but It’s getting quite frustrating answering the same question over and over.
    We now have about 15 threads on the same subject.
    If you had read back just a few posts you’d know there’s a bug causing this.
    Bob

  • Scrollable Frame hot area

    Hi,
    May be this is an old question but...
    I want to use Scrollable Frame to make interactive tabs that are half hidden in the screen. When the user drags them, they become visible, as they are pasted into a bigger scrollable frame. This works nice, but the drawback is that all the invisible part of the scrollable frame becomes sensitive to the dragging, not just the content (the tabs). So the rest of interactivity in my screen is afected and interfered, making the slideshows underneath in the middle of the screen useless...
    Is there any workaround for this: having the gliding tabs while preserving a swipping slideshow as well?
    Thanks

    Use an MSO instead.

  • Anchoring an object within a scrollable frame

    Hi there,
    I am trying to create a page that scrolls horizontally through a series of images. I am able to do this but I am having trouble anchoring my company logo so that it does not move when I scroll through the images. I have seen on apps that this is possible... can someone give me some advice?
    Thanks!

    Turn your company logo into a two-state MSO that's set to Auto Play and Stop At Last Image. Put the logo MSO on top of your scrollable frame, and you'll be able to scroll the frame behind the logo. Let us know if that works, or if you're looking for a different effect.

  • Scrollable Frame solution for EPUB Fixed Layout

    Hi,
    I have found a solution (or, rather a hack) which allows us to create scrolling frames for EPUB Fixed Layouts.
    You can find the exported EPUB, as well as my InDesign file on my Dropbox: EPUB scroll.
    This solution has some weak points and has only been tested in iBooks on an iPad with iOS 8, but here's how it works:
    Create two text frames (one as big as your text requires, and one which will be the container [tip: make the container a bit wider than the text frame])
    Cut the big text frame, select the smaller container frame, and Edit->Paste into
    Right click on the container, select Object Export Options, choose EPUB and HTML and enter "subchapter" as epub:type:
    Open a text editor and create a new CSS file. For CSS code, see below
    Export as Fixed layout EPUB. In the export dialog box, select the CSS tab and add the previously created CSS file
    Done!
    CSS code:
    div[*|type = "subchapter"] {
    position: relative;
    div[*|type = "subchapter"] > div {
    overflow: auto;
    As you see, steps 1 and 2 are essentialy the same as for creating a scrollable frame folio overlay.
    It’s not perfect, and this solution is just a proof-of-concept, but it should get you going.
    An obvious problem is that we use basic HTML scrollbar, which is not being displayed in e-book readers such as iBooks on the iPad. Hence, the user has now idea how long the scrollable content stretches. This could probably be solved with a more complex, JS-based solution.
    Also, the gradient feather at the bottom (which is intended to create a "fade-out effect) seems not to export well. This one should be easy to solve, placing another rectangle with a gradient in it. But I’m not sure if transparency exports well, and haven’t tested it.
    Feel free to use, and improve, this hack!
    Thanks,
    /Jacob

    Thank you Uwe,
    I look and hold you aware of your solution in an environment EPUB
    Patrick
    Dr Patrick Dhont
    Le 29 janv. 2015 à 11:52, Laubender <[email protected]> a écrit :
    Scrollable Frame solution for EPUB Fixed Layout
    created by Laubender <https://forums.adobe.com/people/Laubender> in InDesign EPUB - View the full discussion <https://forums.adobe.com/message/7143179#7143179>
    @Papo – then I would suggest not a scrollable frame, but an MSO you can click through showing the whole text.
    1. Do some text frames the same size
    2. Thread all the text frames to one story
    3. Align the text frames
    4. Make a MSO out of it:
    The text frames are still threaded and text can easily flow between them.
    5. Do some navigation buttons to control the MSO states:
    "Go To First State", "Go To Next State", "Go To Previous State" etc.
    Later you can change the text (add or remove, do different formatting) flowing in that story through the states.
    A very flexible solution. Ok, it's not a scrollable frame, but something like that…
    Uwe
    If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7143179#7143179 and clicking ‘Correct’ below the answer
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7143179#7143179
    To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
    Start a new discussion in InDesign EPUB by email <mailto:[email protected]software.com> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=50 01>
    For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>.

  • Scrollable frames question.

    Hey there,
    we've got a problem at work with building scrollable frames.
    We've made endless amounts of regular scrollable frames, which all work perfectly.
    But now we're trying to paste an image into a "free shape" (triangle for example, or a trapezium,...) and make that scrollable.
    It works fine in indesign, but when viewed on the iPad. the triangle shape (or any shape really) turns into regular rectangle again.
    Is there a way to do this? Or are scrollable frames always rectangular?
    THANKS!
    kev

    cvg.br, follow Bob's suggestion to the letter:
    - create your scrollable frame using rectangles
    - draw the non-rectangular shape you want to use as a mask and arrange it in front of the scrollable frame
    - with the non-rectangular shape selected, convert it into a multi-state object (it'll become two identical states)
    - set the MSO to autoplay once (everything else unticked) in the Slideshows section of Folio Overlays

  • Send Scrollable Frame to Back

    I'm trying to implement a scrollable frame in a layout, so that it appears to be pulled out from behind a stationary graphic. It always shows up on my iPad in front of the graphic. I've tried to put it on its own layer which is at the bottom, but it still goes to the top. Is what I am trying to do possible?

    They're called overlays for a reason. You cannot have static content on top.
    Convert the image to an MSO, set to auto play once and that should do
    the trick.
    Bob

  • Scrollable Frames canceled out by video on page

    I had wired up a scrollable frame (tab) at the bottom of my page. Tested and everything works fab. I added a layer above this scrollable area and dropped several video clips into the layout. Those clips are part of the main page content.
    As soon as I did this, the container and the scrollable content placed into that container doesn't render when the file is Published/tested. It fails on both Desktop and iPad Viewer.
    If I hide the layers contain the video clips the scrollable frame content returns and works just fine. Is this a known issue that video even being present on the same page kills scrollable content?
    New to using scrollable frames along side video content, and I haven't tried the myriad of hacks to get it to work. Want to start with the obvious questions... should this work?
    Thanks
    Steve

    I've made some progress, and have also made some odd discoveries.
    So, I was able to make the MSO work - but it doesn't work consistently. I went back to the original approach of putting the tab on the first state, and the videos on the next 3 states, This way the tab starts things off, and as soon as someone taps the invisible buttons to jump to any video, those videos play fullscreen.
    The trick is a tap to return to the first state where you are then able to drag the tab (scrollable frame) up. It might trip a few users, but is a trade off, where most people will just try to drag it again and will have success. Acceptable for this secondary content.
    This page is the last page in a 9 page stack. When I "Preview" the page on Desktop or direct to iPad. the page loads up by itself and everything works great!
    However, when I upload the whole article/stack to the DPS server, and download it. I of course have to swipe down from page 1. When I arrive on page 9, the videos work just fine, but the tab is gone on the first state. It doesn't render at all.
    Once you click to a video, you see the "dummy" tab appear on those other states. Clicking in that place holder area to return to the first state where the tab should be removes the "dummy" tab, and the actual tab doesn't render.
    As you can imagine - this is maddening!
    Thoughts I have... could something on the other pages be messing it up? Possibly, but every page in the rest of the article have static content, and 1 scrollable frames. No other videos OR multistates. And all the other scrollable frames work 100% of the time.
    Is there a limit to the number of scrollable areas and I've hit it? I'm going to start trashing pages one at a time to see if I strike a nerve. But I'm grasping at straws.
    If you think of something, all suggestions are welcome.
    Thanks!
    Steve

  • Reset Scrollable Frame

    Is it possible to include a button within a Scrollable Frame that resets the frame back to it's initial setting? I'm wanting to include a "back to top" button at the end of text in a scrollable frame.
    For a big workaround, I duplicated the frame, made a 2-state MSO, and the "back to top" button was set to "Next State," and the MSO switch naturally reset the frame so the top of text was back. But this seems a bit messy...

    I think you pretty much nailed the workaround. Pretty clever.

  • Trouble nesting video in scrollable frame

    Hi I'm having trouble getting a video into a scrollable frame. I am using a scrollable frame to make a pull out tab on my page. When I cut and paste the video and a tab into the container frame the only folio overlay option i am given is video, it will not let me make the frame scrollable. Any help would be greatly appreciated. Thanks!

    You can get around this by creating a scrollable frame with dummy content.
    Delete all the content after setting the scrollable frame options and then
    pasting the video inŠ.BUTŠ
    You may want to rethink this by using an MSO instead. AFAIC, using a
    scrollable frame for this is not a great idea and can, depending upon the
    size of the scrollable area, interfere with the navigation to the next
    article or page.

  • Bug - Button inside scrollable frame

    Hi,
    I got a button bug in my folio.
    I made a scrollable frame with buttons inside it and the buttons controls a multistate.
    When I tap the buttons they don't perform the action, it just change the color (click state).
    It only performs the action when I tap again the same button.
    What can I do to fix this issue?
    Thanks.

    Hi Bob,
    I am using ID CC 2014 and testing on an iPad.
    In my article, I made two objects a MSO and a scrollable frame with some buttons inside it.
    My scrollable frame has buttons only and allows the user to slide these buttons horizontally.
    The buttons has an action to change the states of my MSO (go to state).
    The problem is when I test this folio on my iPad, If I tap any button, the state of my MSO keeps the same and the button goes to the Click State.
    I can only access other state of my MSO clicking a second time on the same button.
    So the button keeps on the Click State and my MSO change to the State that was scheduled.
    What can I do to fix it?
    Thanks.

  • Hiding a button underneath a scrollable frame

    HI there, I'm looking to have a button underneath a scrollable frame that is revealed and becomes functional when an image is swiped away from the top level.
    Is there a way to tap through scrollable frames or include transparent elements within the scrolling frame so that I can swipe away my image to find a button underneath?
    Cheers, Alex

    Can't be done. The area taken up by that frame is live all the time.
    You could try it with an MSO instead of a scroll. That would work.

Maybe you are looking for