How to script all sql jobs

Hello,
Is there a way in sql2k5 to script all sql jobs at once. In sql2k you could right click on the agent and select that option however I do not see it in sql2k5. Thanks.

Hi John. Click the 'Jobs' folder under the SQL Server Agent node in SSMS, then hit the F7 key (brings up the Summary pane). Highlight all the jobs you want to script using a combination of Shift and Ctrl keys, then right click, Script Job as..., then choose where to script to.
HTH,

Similar Messages

Is there any way I may set low resources priority for a specific job or even all SQL jobs?

Is there any way I may set low resources priority for a specific job or even all SQL jobs?
Our database is quite big and everything works OK and very fast, except SQL jobs which are used mainly for maintenance purposes.
I have one specific job which runs for 2 minutes and takes a lot of resources which may affect execution of other stored procedure which should be executed fast.The worst part is that this job has to be executed during the most active working hours. It does
not matter for me how long will it take to execute this job. I just do not want it to use so much resources.
Also I noticed when SQL backup job (takes about 4 minute) is scheduled it also takes a lot of resources and sometimes because of that I am receiving "login timeout" error on my web site.

depending on you sql server version and edition, you can use resource governor and limit the cpu and memory.
in most typical cases , you can use the session user name and times and classify the how much cpu and memory they can use. refer : https://msdn.microsoft.com/en-us/library/cc645892.aspx
but in your case, the problem seems to be with the maintenance jobs which could run as sql server service account.
also, if the backup are third party tool backup, you can specify the priority level and other options etc to make it less priority.
it is possible to do that even with native backups such as specifying the limiting buffercount, max transfer size, if the server is memory pressured. sometimes, stripping the backups to multiple sets across different devices, could help as well. even though
stripping the backups can introduce another complexity.
may be you need to rethink you back up\recovery strategy.
Hope it Helps!!

How to drop all scheduled jobs

Hi,
in 8i, how to drop all oracle scheduled jobs ?
Many thanks before.

SELECT job FROM user_jobs;
exec dbms_job.remove(23);
To remove all jobs, you can write a pl/sql block to loop through all jobs and remove them.
http://www.psoug.org/reference/dbms_job.html
Aalap Sharma :)

How to find which sql job is calling other jobs ?

Hi ,
Is there a way to find a parent child relationship for sql jobs too ?
Meaning, how can I get what all jobs are being called in a particular job etc ? I have 241 jobs on my server. I need to document those.
Thanks in Advance
Ram

See also this blog post by Brad Schulz
http://bradsruminations.blogspot.com/2011/04/documenting-your-sql-agent-jobs.html
For every expert, there is an equal and opposite expert. - Becker's Law
My blog
My TechNet articles

How to script all prefs ?

How do I script adobe indesign (Win) prefs and presets?
I would like to scripts all the entries on the Preferences menu, is this possible and how do you do it?
I have tried to copy the:
C:\Documents and Settings\%username%\Application Data\Adobe\InDesign\Version 5.0
and
C:\Documents and Settings\%username%\Local Settings\Application Data\Adobe\InDesign\Version 5.0
directories, to get all my prefs accross 30+ PC's the same, but it does not work consistantly.
I would also like to make the stroke and swatch a certain thing.
Are there any guids out there of the variables for all the prefs etc?
thanks.

In his 2nd post in http://forums.adobe.com/thread/416524?tstart=0, plug_in_guy shows how to set the Application default fill & stroke.
As for 'start up' scripts, the scripting tutorial states
To run scripts when InDesign starts, put them in the Startup Scripts folder inside the Scripts folder in your InDesign folder.

How to see all sql statements on sql commands under history link

Hi All,
How to see the all the sql history on sql commands tab.
I want see all sql statements.
Where to set if we need to store more sql statments in history.
We are using Apex3.2 and 10g database(EE).
Thanks,
Nr

I just checked the source code of the SQL commands history region and that report fetches a maximum of 1000 records. I don't know if you change the setting somewhere in the builder, but seeing the code it looks as though 1000 is hard-coded in the report definition(apex 4.0).
If you need to see all the command history,you can query the original table: APEX_040000.WWV_FLOW_SW_SQL_CMDS
Note that is an internal table used by apex and hence you might not find any documentation about it(google got me one valid hit: Identifying Inactive Workspaces which seem to confirm the table's use).
Anyway, here's what you need to do, ask your dba to grant your workspace user select access on this table
Connect as dba user and run
GRANT SELECT ON APEX_040000.wwv_flow_sw_sql_cmds to '<WORKSPACE SCHEMA>'Now you can run the following command from your workspace to see the entire command history using
select * from APEX_040000.WWV_FLOW_SW_SQL_CMDS where parsed_schema = '<WORKSPACE SCHEMA>';You might want to revoke the grant once you have seen the data/taken out an export due to security issues.

How to cancell all scheduled jobs

Is there a Command line (or) any other option to kill all scheduled jobs, because when cloning of data happens from Production to other testing instance, scheduled jobs will still be running and are consuming space.
We could use admin screen , killing one by one is taking lot of time.
Appreciate your input
Thanks

Hi user10596151,
you can try the following:
To disable all of the scheduled workbooks immediately, use the following PL/SQL block. The PL/SQL block should be run as a privileged user (such as 'system').
Declare
cursor c1 is
select job from all_jobs where what like '%EUL5%';
begin
for i in c1 loop
dbms_job.broken(i.job,true);
end loop;
end;
Note: For Discoverer 4 replace EUL5 with EUL4

How to view ALL batch job details (SM37) at one glance ?

Dear all,
I am documenting all released batch job details, the information required includes the job name, client number, job frequency .. etc.
In order to see that information, i go to SM37 and click on each job to see the details. I have about 60 jobs released, to get their details i have to click on them at least 60 times.
Is there a report or table that i can refer to that provides me the information of all the jobs in one screen ?
Thanks.
Advice and comment will be appreciated.
Regards,
Kent

Dear Prashanth,
Thanks for the link, I managed to get the required information from table TBTCO or TBTCP with below selected fields.
JOBNAME = Background job name
SDLSTRTDT = Planned Start Date for Background Job
SDLSTRTTM = Planned start time for background Job
SDLUNAME = Initiator of job/step scheduling
PRDMINS = Duration period (in minutes) for a batch job
PRDHOURS = Duration period (in hours) for a batch job
PRDDAYS = Duration (in days) of DBA action
PRDWEEKS = Duration period (in weeks) for a batch job
PRDMONTHS = Duration period (in months) for a batch job
PERIODIC = Periodic jobs indicator ('X')
STATUS = State of Background Job, S = Released, F = Finished
AUTHCKMAN = Background client for authorization check
EVENTID = Background Processing Event
EVENTPARM = Background Event Parameters (Such as, Jobname/Jobcount)
Dear Juan,
Thanks for your reply.
Regards,
Kent

How to find all sql ran in the database for particular time

Hi All,
i need to find all sql ran in the database between 7am to 9am on may 22 2012 , i can generate AWR but i think it shows only top sql but i need all sql during this time
is any views in oracle to get this information
Thanks

i need to find all sql ran in the database between 7am to 9am on may 22 2012 , i can generate AWR but i think it shows only top sql but i need all sql during this time use below view to get detail.
V$active_session_history
dba_hist_active_sess_history

How to view ALL batch job details at one glance using function module

Hi Experts,
i need to see all batch jobs details, the information required includes the job name, client number, job frequency .. etc.
but i need to do it with only FUNCTION MODULE.....
SINCE THE INFORMATION IS CAPTURED BY THIRD PARTY SYSTEM.......i am looking for any function module
could you please suggest me any FM's where i can get this information.................
thanks and regards
SAM

Hi,
You can explore these functional module for SM37 desired details:
With function module BP_JOB_MAINTENANCE (transaction SM37), you can call the full job maintenance system of the background processing system, starting with the job selection screen.
Since many users are not familiar with job maintenance and have no desire to search for their jobs, you can use the function modules BP_JOB_SELECT and BP_JOBLIST_PROCESSOR to select and display a list of jobs for the users of your program.
Use BP_JOB_SELECT to generate an internal table of jobs. Then, with BP_JOBLIST_PROCESSOR, you can display the selected jobs in the list format used by the job maintenance system.
You can also use BP_FIND_JOBS_WITH_PROGRAM to select jobs that run a particular program. Use this function module with BP_JOBLIST_PROCESSOR to display a job list to your users. Like BP_JOBLIST_SELECT; BP_FIND_JOBS_WITH_PROGRAM offers interactive and silent modes.
Regards,
Ashutosh

How to see all sql statements passed to the db?

Is it possible to configure Jdevloper (11.1.1.4) in way so that it shows all sql statements in the console?
thx in advance

Hi,
under your ViewController-Project Properties you'll find the Run Configurations. Under Java Options enter the following statement:
-Djbo.debugoutput=console
Marc

Where is the printer queue stored - and how to delete all queue jobs?

I ran into a problem after I installed the Roll paper feeder on my Epson R1800. All of a sudden files will not print anymore.
One thing that may cause a problem is that there are two previous files (pdf I think) that someone else tried to print yesterday looking for a different printer on regular Letter size paper that are still in the queue because they did not print successfully. Everytime I tell Photoshop to print my photo on the Roll paper, those two old jobs pop back up on the printer queue gui and the system stops saying "wrong paper type for this job". Then I delete those two old jobs so there is only the Roll paper one left but it just sits there and wont print. When I launch the utility to check is all is kosher, sometimes it will give me the ink cartridge levels without a problem but sometimes it claims a communication error. I have re-checked the connection and everything and all is OK. When I launch the printer utility and tell it to print a Nozzle Check test, it prints it without a problem so there really is no prob with the communication.
When I restart the computer and the printer and try again, the two old jobs that I deleted in the previous step always reappear. So I wonder if, those two pdf jobs are kinda screwing with the system and should be deleted. But as i said, everytime I delete them, they look like they disappear from the list but my photo job just sits there on the queue without printing. The jobs are not stopped and there is no Hold on this one. If I quit and re-launch the print job, the old ones re-appear in the queue. So they must be stored someplace and are not deleting correctly. Does anyone know where this cue file is stored and what it is called? I have looked in Application Support and in Preferences but I can't see anything that looks like it.
I have downloaded the drivers from Epson for this printer again but that doesn't do anything either. I am using 10.4.11 on an 24 inch iMac intel 2.4Ghz. I only use the stock Apple utilities, no funky third party addon except for the Epson drivers. The printer utilities are:
Epson Printer Utility v3.01
Stylus R1800 utility v4.7(161.10)
Thank you for any help.
Bo

Hooray, we found the problem! BOO, we already found the problem elsewhere!
Sooo, it seems we have some kind of Permission problem, have you Repaired Permissions ad rebooted?
At this point I think you should get Applejack...
http://www.versiontracker.com/dyn/moreinfo/macosx/19596
After installing, reboot holding down CMD+s, then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 5 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 5 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files!
Disconnect the USB cable from any UPS so the system doesn't shut down in the middle of the process.
Or we could maybe go back to that window, click on Printers, remove it? (Thinking perhaps the jobs will go away with the printer!?)
Or would you like to delve into the hidden folders/files to try to handle this?

How to get the SQL Signon that Agent Jobs "Run As" or "Executed as User"

How to get the SQL Signon that Agent Jobs "Run As" or "Executed as User"?
I have an install SQL scripts that creates a Linked Server. I want to put some security on the Linked Server and only grant the Agent Job Signon (the "Run As" or "Executed as User") access to the linked server. I need to retrieve the
Agent Job Signon (something like "NT SERVICE\SQLAgent$FIDEV360BI02").
I could query certain jobs and SUBSTRING the Message column - using some form of the query below, which would return "Executed as user: NT SERVICE\SQLAgent$SSDEVBI02. The step succeeded." But that is pretty imprecise.
use msdb
SELECT [JobName] = JOB.name,
[Step] = HIST.step_id,
[StepName] = HIST.step_name,
[Message] = HIST.message,
[Status] = CASE WHEN HIST.run_status = 0 THEN 'Failed'
WHEN HIST.run_status = 1 THEN 'Succeeded'
WHEN HIST.run_status = 2 THEN 'Retry'
WHEN HIST.run_status = 3 THEN 'Canceled'
END,
[RunDate] = HIST.run_date,
[RunTime] = HIST.run_time,
[Duration] = HIST.run_duration,
[Retries] = HIST.retries_attempted
FROM sysjobs JOB
INNER JOIN sysjobhistory HIST ON HIST.job_id = JOB.job_id
-- CHANGE THIS
-- WHERE JOB.name like '%GroupMaster%' or Job.name like '%etlv%'
ORDER BY HIST.run_date, HIST.run_time

by default all sql jobs are executed as sql server agent account, unless otherwise a proxy is setup.
you can get the proxy information as Olaf mentioned, if the proxy_id is null for the step, it implies that the job step was executed as sql server service account and in such case it will be null
so, if it is null, it ran as sql server agent account.
so, one work around is get the sql server agent service account and if the proxy is null, that means it ran as sql server agent account, so, use isnull function. the disadvantage would be if the sql server agent account was switched, you might not get the
accurate information as the new account will show up though the job really ran as old account, to get this information, you need to get this from the logmessage column as you mentioned above.
try this code...
/*from sql 2008r2 sp1, you get the service accounts using tsql,otherwise you have to query the registry keys*/
declare @sqlserveragentaccount varchar(2000)
select @sqlserveragentaccount= service_account
from sys.dm_server_services
where servicename like '%sql%server%agent%'
select message,isnull(name,@sqlserveragentaccount) as AccountName
from sysjobhistory a inner join sysjobsteps b
on a.step_id=b.step_id and a.job_id=b.job_id
left outer join sysproxies c on c.proxy_id=b.proxy_id
Hope it Helps!!

How to fill combo box with list of all SQL server

Ok, I know how to find all SQL servers that I need, I have code for that task, and I have Array of all servers.
My problem is ...
I made setup project and do a huge work, and in the end this task appear!
I used ORCA tool to change TextBox (A) template in visual studio (2008 by the way), and I transform first TextBox to ComboBox.
Now, the little part that I'am missing is how to fill this combo box with a result of my function for listin SQL servers?
Can I somehow send combobox object to myMethod:
private void FillCombo(ComboBox cmb)
// do the job
or
instanceOfThisCombo.Items.Add(listOfSQLServers);
please help me to solve this... thanksc#

Hi Valerij,
The ComboBox control in an MSI dialog uses the ComboBox table to populate the items in it. To get what you want, you need to update the ComboBox table in the MSI package with your application and run the MSI package. The following KB article describes how to dynamically populate a ListBox control in Windows Installer:
http://support.microsoft.com/kb/291329
This method introduced in the above KB article also applies to populating a ComboBox control in Windows Installer.
I don't think it's possible to run the application as a Custom Action from within the MSI package because the application will modify the content of the MSI package which is currently running. So you need to launch the MSI package from within your application after updating the ComboBox table. In short, when installing, just run your application which updates the ComboBox table and install the MSI package.
Hope this helps.
If you have any question, please feel free to let me know.
Sincerely,
Linda Liu

Execute the SSIS packages (2008 version) using SQL job 2008

We need to execute the SSIS packages (2008 version) using SQL job Please help with details information how to execute it.
1.Protection level of the SSIS packages.
2.Configuration File (Curently using XML file)
3.Please provide details how to create Credential (Windows User etc) Do we need to create windows cred explicitly to run the Job etc..
4.Please provide details for creating Proxy.
5.How can we configure the xml file since the xml is reading from local box but when the package is moved from developement box to production box
then the local drive might not be mapped with Production box .
6.Roles that need to be tagged for the Proxy/Credential.
7.Which is the best and safest way to execute ssis packages either msdb deployment or filesystem deployment and other necessary details.

Hi,
If you want to Execute your SSIS package using SQL job then best solution is to first deploy your Package
either using msdb deployment or filesystem deployment.The simplest approach to deployment is probably to deploy to the file system.
So, here is the deployment steps;
There are four steps in the package deployment process:
    The first optional step is optional and involves creating package
configurations that update properties of package elements at run time. The configurations are automatically included when you deploy the packages.
    The second step is to build the Integration Services project to create a package deployment utility. The deployment utility for the project contains the packages that you want to deploy
    The third step is to copy the deployment folder that was created when you built the Integration Services project to the target computer.
    The fourth step is to run, on the target computer, the Package Installation Wizard to install the packages to the file system or to an instance of SQL Server.
you can use below link also;
http://bharath-msbi.blogspot.in/2012/04/step-by-step-ssis-package-deployment.html
After that you need to Schedule package using SQL Agent then Have a look at the following link. It explains how to create an SQL job that can execute an SSIS package on a scheduled basis.
http://www.mssqltips.com/sqlservertutorial/220/scheduling-ssis-packages-with-sql-server-agent/
Deployment in msdb deployment or filesystem deployment has there own merits and demerits.
For security point of view msdb deployment is good.
it provides Benefits from database security, roles and Agent interaction
Protection Level;
In SQL Server Data Tools (SSDT), open the Integration Services project that contains the package.
Open the package in the SSIS designer.
If the Properties window does not show the properties of the package, click the design surface.
In the Properties window, in the Security group, select the appropriate value for the
ProtectionLevel property.
If you select a protection level that requires a password, enter the password as the value of the
PackagePassword property.
On the File menu, select Save Selected Items to save the modified package.
SSIS Provide different Protection levels;
    DontSaveSensitive
    EncryptSensitiveWithUserKey
    EncryptSensitiveWithPassword
    EncryptAllWithPassword
    EncryptAllWithUserKey
    ServerStorage
For better undertsnading you can use below link;
http://www.mssqltips.com/sqlservertip/2091/securing-your-ssis-packages-using-package-protection-level/
Thanks

How to script all sql jobs

Similar Messages

Maybe you are looking for