How to see more instances in the Change Log?

I'm using SAP B1 v8.82
When I pull up the change log it might show that a Sales Order has had 12 instances of changes, but it will only show the last 2 users who made changes and it will only show differences between the current version and the version of it before the most recent change. How can I make it show more?

Hi,
What do you mean by current and old version? Any changes in history log under general settings-->service tab?
Thanks & Regards,
Nagarajan

Similar Messages

HT204060 Set how long after sleep a passcode is required - I am trying to change this but the only option I see is "immediately"...Does anyone know how to see more options?

I am trying to change how long after sleep a passcode is required, but the only option I see is "immediately"...Does anyone know how to see more options?

Thanks for the help guys. Disabling Touch ID allows me to see other options...Although I don't understand why Apple would feel the need to put that restriction in place. Doesn't seem to be any sense behind it..

How to see the change logs for billing document

Dears,
Could you please how to see the change logs for billing document.
My client is using ECC 6.0 & if i use VF03 > Environment > changes > does not show the changes i had made.
Thanks in advance
Ranjan

hello, friend.
you should be able to see changes done after the initial creation and saving, by going thru Environment > Changes. try it again, and this time make sure that changes were done to the billing document prior to posting to accounting.
normally, when configuration of Billing is done correctly, there will be little or no instances of changing anything in the Billing document, as saving the document after creation will post this to Accounting. of course, inclusion of a posting block in the billing type will provide you the opportunity for changes.
regards.

How do I make windows smaller so I can see more programs at the same time?

I would like to see more programs at the same time. When I open a program I see the 3 buttons on top left, the close button, the plus and minus. But it either disappears ( - ) or comes on full screen ( + ). How can I make them small and move them around to see different things on the monitor?

Hi,
At the very bottom right hand corner of your window there. There are three little diagonal lines. Click and hold with the mouse button and drag it all around there. Better? Hope so!
Regards.
Ian.

HOW TO USE FUNCTION Deletion of Requests from the Change Log IN PRCSES CHAN

Respected all
i used Deletion of Requests from PSA from the prcess chain and found good results, now i have only one request at the psa and thus i am doing good space utililisation. but when i am using Deletion of Requests from the Change Log i am not getting any changes in the request of dso. kindly let me know how to use this 2nd function.
thanks
abhay

Hi Mahodaya,
As per SAp standards its good to delete the requestes that are no longer needed for the delta update and no longer used ffor inti from the change log table and the data is loaded already in to DSO.
Goto RSPC
Click on create New PC -> enter the PC name n long descp
Next we need to define the start process for the PC.Maintain the start variant process.save n come back.
for deletion of change log we have option in the Other BW Processes -> deletion of requestes from change log
Once u select the option we get a dialoge box here we need to create the variant for the process enter the process variant n long descp. cick ok.
Next in the maintenance screen for the deleting the request from change log table will appear.
Enter the selection patterns to which the requestes should be deleted from the change log.
In the maintenance screen, select one or more Data Store objects for which requests are to be deleted from the relevant change log tables under Data Store Object column and select theInfo Area of the corresponding Data Store Objects under Info Area
If you select the first check box exclude selction pattern, this means that del of requests from change log table will be ignored.
or
We can delete the requests which are Older than N-number of days (or) date in the above screen. For this one, enter the number of days (or) date in the filed Older than .
OR
If we want to select the requests with a certain status then we can also do in the above screen. We can select the following status indicators from the above screen.
Delete Successfully Updated Requests Only -This status will delete only requests which
are successfully updated into corresponding Data Store objects.
Delete Incorrect Requests that were not Updated - This status will delete only incorrect requests which are not successfully updated into the corresponding Data Store Objects.
Delete Activation Requests only, No Load requests- This status will delete only the activation requests (requests that begin with ODSR_... ). No load requests are deleted.

How to use the change log in ODS to track Delta change?

People say that historical data (like Delta change) in ODS can be tracked in the Change Log. How to use the change log to track historic data?
Thanks

Kevin
See if it helps
Every ODS object is represented on the database by three transparent tables:
Active data: A table containing the active data (A table)
Activation queue: For saving ODS data records that are to be updated but that have not yet been activated. The data is deleted after the records have been activated.
<b>Change log: Contains the change history for delta updating from the ODS Object into other data targets, such as ODS Objects or InfoCubes for example.</b>
An exception is the transactional ODS object, which is only made up of the active data table.
The tables containing active data are constructed according to the ODS object definition, meaning that key fields and data fields are specified when the ODS object is defined. Activation queue and change log are the same in the tables structure. They have the request ID, package ID and the record number as a key.
Data base structure changes
http://help.sap.com/saphelp_nw04/helpdata/en/d2/d53ec3efdc9b47a9502c3a4565320c/frameset.htm
Hope this helps
Thnaks
Sat

Confition type FRC1- how to get the change log,

Hi,
When the condition type FRC1 automatically gets deleted (deletion flag),. and we are not able to see the change log for the same.
how the Conditions are deleted. Or if at all any one has deleted, how to get the change log,

Check in
m/06
go to utilities
change log
If not found consult BASIS consultant

How to rebuild the config from the entries in the change logs

Hi,
We have overwritten something vital in the KEDR t.code through a transport. The users have created their own entries in the KEDR t.code directly in the system because this t.code was available for editing although the Client was locked for customizing (option no changes allowed). Not sure why SAP allows KEDR to be edited although the client was locked for customizing. Anyone knows?
Now the problem is how can we restore the entries maintained by the users?
Fortunately this KEDR table is enabled for audit log. Is there a way to actually restore the entries from the change logs? Please advise.

If the device is already in the Prime Infrastructure, you can open it in Device work center and select the device > use the configuration archive option > scheduled deploy.
Also, the Prime Infrastructure Plug and Play feature allows you to perform an initial provisioning of a software image and configuration on a new device. For more details check :
Automating Device Deployment Using Plug and Play Profiles
Working with Device Configurations
-Thanks
Vinod

How to install several instances of the same application on a computer?

Hej,
I have an application in LV 2009, where I have created an installer. The installer installs to a directory called \Receiver relative to the Program Files directory. If I install this once to a computer, everything is OK.
However, I want to install the same application twice on the same computer. There should be no conflicts between the two applications, since I can configure them to work on different directories and ports. But if I call the installer again, and selects another directory, nothing is installed and I get the message "Installation Summary - No software will be installed or removed". It seems like the installer ignores that I have selected another directory, and just uses the default directory, relative to the Program Files directory.
Anyone knows the trick, how to install several instances on the same computer ?
BR, Jan
Jan Nielsen
Freelance system analyst and LabVIEW programmer

Hi Jan,
This is so because each installer has a GUID that is used to check whether the application needs to be upgraded or not. (It's a Microsoft function).
What you can do is create a new installer with a different GUID (copy the installer in the projects), and check witha text editor whether this GUID has changed.
But any specific reason you need two seperate installs? You can run the application twice with a specific INI token:
allowmultipleinstances=True
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

How to see when and who made changes in some table???

How to see when and who made changes in some table?
Some makes me problems and I want to see who are the usernames.
Thanks

Nikoline wrote:
How to see when and who made changes in some table?
Some makes me problems and I want to see who are the usernames.
ThanksEither you need to implement Oracle Audit, or use Logminer Utility to read archived redo log files

How to add more comments in the Nomination Header notes tab

Short Text
How to add more comments in the Nomination Header notes tab
In the nomination screen, there are the tabs for header and item notes.
Within each of those tabs, there are categories for the type ofcomments. Currently in the nomination maintenance screen header notes
there are onlythree comment categories are available 1) General comments 2) Carriercoment 3) Shipper Comment and We would like add more comments in this
section. In the configuration we couldn't find a place where we can add
more customer specific comments. Can we add comments in the header
notes tab and if so where can we add the additional comments ?

Hello Giri,
You could try the following to create new text types for nomination header.
1) Execute transaction SM31
2) The view here is V_TTXIDI
3) Click on maintain .
4) Create new entries .
5) Since you want to add new more comments in the nomination header enter the text object as OIJRCODE_H
6) Enter a text ID starting with Z
7) Enter a description and save the new entry.
In case you want to add new comments at the item level use the text object as OIJRCODE_I.
When you restart the transaction O4NM again you will see the new entry added.
This will solve the issue.
Regards,
Sandil

How to update the change log table?

Hi
I am doing some manipulation on the ODS records and writing few new records directly into the active table of my ODS. how do i update the change log table so that i can do a delta from my ODS to further data targets??
i see the fields REQUEST, DATAPAKID, PARTNO and RECORD in the change log table. what values should these fields have for my new records??
Regards
Sujai

Hi,
Please try this option. In stead of writing directly into DSO, do it in another Custom Z DSO. From there, do the FULL load to your previous DSO. This will ensure that the data consistence through the system. Also, do not forget to delete the data from Custom Z DSO once you successfully loaded the data.
Thanks,
Saru
Edited by: P. Saravana Kumar on Apr 1, 2009 6:23 PM

How to check and delete the change logs for DSO

Hello All,
I have build a process chain that will delete the change logs for DSO prior to 7 days but when i executed it, the number of entries are still the same within DSO.
Then i tried deleting directly from "Environment" menu from DSO maintainance but does not work. Can anyone please explain how to resolve this issue or the proper process of deleting the change logs. Appreciated.
Thanks,
M

Hi
Check out the below two articles
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/1058b68f-96c4-2d10-fbb1-de8757ca6a58?QuickLink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a02ba9e7-bb6f-2c10-09b4-e86b9fcbad41?QuickLink=index&overridelayout=true
Regards,
Venkatesh

Is there a way that I can see more than just the next slide in Presentation mode (as an old version of PowerPoint used to do)?

Is there a way that I can see more than just the next slide in Presentation mode (as an old version of PowerPoint used to do)?

Sorry - should have been more specific. As far as I can see, Keynote will only allow me to see the current slide and the next slide on my laptop when I am presenting a slideshow through a projector. But an old version of PowerPoint allowed me to show the current slide....and (adjustable) many more slides ahead (say 10)....so I could simply jump ahead to a 'future' slide and skip several slides in between. Net result being that I was able to matcgh my slides to group discussions rather than stick to a fixed, predetermined slide show.
As much as it pains me, without this facility - PowerPoint (old verson, not current one) is more useful for me! :-((

How to create an instance of the database

No that won't work. I have to set it up independant from each other because I can't get to Uni until Monday and I want to have this done over the weekend really.
The main issue seems to be now how to create an instance of the database

To create a database:
you first connect as internal (user) with the passeword 'oracle'
the syntax is: connect internal/oracle
You type in this script:
STARTUP NOMOUNT PFILE=$PFILE
CREATE DATABASE db01
LOGFILE
GROUP 1 ('c/oracle/oradata/db01/redo_01a.log',
'c/oracle/oradata/db01/redo_01b.log'
) size 100k,
GROUP 2 ('c/oracle/oradata/db01/redo_02a.log',
'c/oracle/oradata/db01/redo_02b.log'
) size 100k
MAXLOGFILES 32
MAXLOGMEMBERS 2
MAXLOGHISTORY 1
DATAFILE 'c/oracle/oradata/db01/system01.dbf'
size 7M
MAXDATAFILES 254
MAXINSTANCES 1;
This script could be modified to reflect the features you want for your database.
db01 = the name you can give to your database
Good luck,
Henri

How to see more instances in the Change Log?

Similar Messages

Maybe you are looking for