How to see request number in ODS table

Hello,
I know data last request has some incorrect data (delta , LO).
In order to change it I need to select data by request number. Table /BIC/AXXXXXX00 does not contain request number.
Please tell me how I can select data by request number.
Thanks

Hi
To find the request, goto the table RSMONICTAB in BW. Enter the request number.It'll give you the date time stamp as to when the request was loaded into BW.
Go back to monitor (RSMON) and filter on the date with the date from the table.
You'll find your request.
This may help u.
Regards
Naalla

Similar Messages

  • How to set request number of info package using start routine

    Hi All,
    I have a specific requirement in which I need to upload only selective request nos from PSA to DSO.
    Any one can suggest how to set request number of info package using start routine or any other mode so that only selective request should proceed using DTP?
    Thanks
    Sangita

    You'll probably want to do this in a start routine.  It is probably not advisable to hard-code the technical name of the InfoPak.  They seem to remain the same upon transport, unlike DTP technical names which are locally generated.
    I would do a SQL select like this in a start routine, and then filter based on the results of the SQL.  You'll probably want to sort the results by date and time, both descending.  Or do a MAX in the SQL.
    Please let me know if this isn't clear.
    select q~rnr q~logdpid q~tdatum q~tuzeit
    from rsreqdone as q
      inner join rsldpio as p
        on p~logdpid = q~logdpid
    where p~objvers = 'A'
    and p~logdpid like 'ZPAK%'
    and p~source = 'your data source'

  • How to see tax rate in KONV table

    hi all,
    how to see tax rates in KONV table?
    please help

    Hi
    There is a field called "TX" i.e. TAX CODE.. in that check what code is that?? then check the TAX table T007A to find the Tax rate applied for the document based on the respective TAX CODE.
    Hope this helps.

  • How to create REQUEST NUMBER for STANDARD TEXT (SO10)

    how to create REQUEST NUMBER for STANDARD TEXT ( t-cODE SO10)

    you can do this using program RSTXTRAN .
    Text key - object
    Text key - name
    Text key - ID
    Text key - language, then it will store under one transport that can be moved to other system.
    check out the following link.
    http://help.sap.com/saphelp_47x200/helpdata/en/f4/b4a1ed453611d189710000e8322d00/frameset.htm

  • How to find request number of SAP Script's Form

    Hi All,
    Can anyone tell me how to find out request number of scipt's form
    Regards
    Shashikant

    Hi,
    Se03->Search for Object in Requesta/Tasks--->Right Click ->Execute->Add a new entry with check box ticked,FORM,& Form name on the right side-->F8  It will display all the requests pertaining the form you have keyed in.
    Regards
    Raju Chitale

  • How to see lock status of a table ?

    Hi,
    My question is : how to see the lock status of a table ?
    and how to lock a table except run the FM ENQUEUE_TABLENAME?
    Is there any transcation that can lock a table ?
    thx in advance.

    Hi Vincent
    Via transaction SM12 we can check the lock entries at a particular point of time...
    Kind Regards
    Eswar

  • How to see all the list of tables in APEX

    Hi
    COuld anyone of you help me find out how to see all the tables present in APEX ?
    I can see all the list of tables when i give the command : select * from tab
    But apart from finding like this , is there any way to find out all the list of tables ?
    Regards,
    Tasha

    Hi Tasha,
    For Apex 3.2 ;
    select * from dba_tables where owner in
    (select workspace from APEX_030200.APEX_WORKSPACES)
    tab is a synonym for user_tables
    http://www.oreillynet.com/pub/a/network/2002/10/28/data_dictionary.html
    hope this helps you
    regards
    mozkavra

  • How to display SC Number in approval table?

    Hi All,
    On the HOME page of EBP , click
    Approval
    , a table is displayed with three columns
    1)Description
    2)Created On
    3)Action
    We need to display the SC number in this table , prefreably by adding a new column and showing the Sc Numbers in that or at least add the SC Number in the description column.
    We found out that some modifications in the ITS Service BBPAPPROVAL , Template SAPLBW02  1200 required .
    Any information will be of great help.
    Thanks,
    Anubhav

    Hi Masa,
    Found the following data in txn SWI2_FREQ
    TS10407930     Read Lang.-Ind. Text for Approval Status
    TS14007989     Determine next Approver
    TS10407929     Send Mail to Persons Involved
    WS14900032     Sub-Workflow to Send Mail / SC loop
    TS14907939     Create object BUS4101
    TS10008126     Approval of shopping cart
    WS10000049     Event Handling in the Component
    WS14000133     Approval Shopping Cart n-Level (BADI)
    WS14000134     Subworkflow for N-Level Approval BADI
    WS10400051     Final Proc. After Approval Alternative 2
    TS10007991     Set SC status to 'Released'
    WS14900031     Sub-Workflow to Send Mail / SC
    WS10000060     Workflow Without Approval Shopping Cart
    TS10407972     Change Rejected Shopping Cart
    WS10400026     Sub-Workflow to Send Mail / SC
    WS10400010     Goods Receipt Workflow Without Approval
    WS10000129     One Step approval of shopping cart
    TS10407935     Set Status of Goods Receipt to Released
    TS10407971     Get Confirmation Rejection Description
    WS10000203     Wait for confirmation events
    WS10400003     Update confirmation upon approval/reject
    TS10107914     Present changes to requester
    TS00008267     Generic decision task
    WS30100051     Workflow system verification
    I Tried by selecting Standard Task and entering TS10008126 by it gives "Task does not exists" message.
    Thanks a lot,
    Anubhav

  • How to see po number using fbl1n in re  against documents

    Is it possible to see po number while using fbl1n t.code  for only re documents.

    Hi,
    This is not possible.  You will get this information through T.code:SQVI, where you can develop/write a querry with the required fields. It is simple to devlop this querry.
    You can choose the following while creating the report...
    enter name as : xyz and click on create
    1.Data source    :  Logical database
    2.Logical database : BRM
    then click on enter
    then you will get the list of tables and fields combinations... then you can select the fields as required and then execute.  You will get the output with PO numbers.
    Let me know if you need any further information.
    all the best
    Prasad

  • How to assign request number to a report painter

    hi all
    i have to assign a request number to the report that i have created using report painter.
    please let me know how to assign a request number.
    thank you all in advance.

    Hi,
    If you are creating new report once you press Create on SE38, it would give you a screen where you enter the program details..
    After this You  get a Create Object Entry Screen on which you have to deifne Package ... Please don't select package as $TMP as it would not allow you to create request..
    Select relevant package and Press Save..
    It would give you another screen with blank Request Number..
    Please press the Create Button..
    The system will create a request Number and display in the request number..
    Press Save ..
    Hope this helps..

  • How to hide page number in the table of content

    Hi,
    I'd like to know how to hide page number in the ToC. They show automatically, but at least for the headings of third ad fourth order I'd like to suppress/omit them.
    Thanks for any advice!

    You have in the Inpspector > Document tab > TOC > uncheck button for #'s

  • How to know request number?

    hi,
    few days back i saved a query in a request.
    now i forgot that request number.
    i know description and technical name of the query.
    do i have any method to know that request number?

    Hi,
    If you want to know the TR number,In RSA1 Transport connection,Just select the report and drag dwn the particular report from left side to right side panel.
    If the report already it has been released or saved under the request,it will show the Transport request number and package name.
    Hope this will help.
    Regards
    Ashok

  • SOST - transmission requests- How to see the log in a table

    We see the messages and the log in SOST for a background job.
    We want to see the log contents in a related table.
    We checked table SOOD but can not see the log details.
    Is there any way to see / extract log details by giving the user ID , created date and job name?
    Regards,

    Hi
    If you are using the Extending classic, you can see the output details in the SOST.  suppose if you want to check whether the PO send to vendor or not viea email. 
    BR
    Satish

  • How to move large number of internal table data to excel by program

    Hi,
    Iam working on a classical report wherein my requirement is:
    Have around 25 internal tables which I am displaying using a selection screen.I need to transfer this all internal tables data to Excel file by executing.
    Now, let me know how can I transfer all those to excel by execution.
    P.S.: GUI_DOWNLOAD or any other excel download related FMs are used to transfer for single/fewer internal tables.
    But here I need to download 25 internal tables data through program.
    How can I meet the requirement..?
    Kindly advice.
    Thanks,
    Shiv.

    Hi,
    Refer to the following code:
    *& Report  ZDOWNLOAD_PROGRAM
    report  zdownload_program.
    parameter : p_path type rlgrap-filename default 'C:\Pdata.xls'.
    data : gt_output   type standard table of trdirt,
           wa_output   type trdirt,
           p_filen     type string.
    at selection-screen on value-request for p_path.
      clear p_path.
      call function 'F4_FILENAME'
        importing
          file_name = p_path.
    start-of-selection.
      select * from trdirt
               into table gt_output
               where name like 'Z%'
                  or name like 'Y%'.
    end-of-selection.
      move : p_path to p_filen.
      call function 'GUI_DOWNLOAD'
        exporting
      BIN_FILESIZE                    =
          filename                        = p_filen
       filetype                        = 'ASC'
      APPEND                          = ' '
       write_field_separator           =
    cl_abap_char_utilities=>horizontal_tab
      HEADER                          = '00'
      TRUNC_TRAILING_BLANKS           = ' '
      WRITE_LF                        = 'X'
      COL_SELECT                      = ' '
      COL_SELECT_MASK                 = ' '
      DAT_MODE                        = ' '
      CONFIRM_OVERWRITE               = ' '
      NO_AUTH_CHECK                   = ' '
      CODEPAGE                        = ' '
      IGNORE_CERR                     = ABAP_TRUE
      REPLACEMENT                     = '#'
      WRITE_BOM                       = ' '
      TRUNC_TRAILING_BLANKS_EOL       = 'X'
      WK1_N_FORMAT                    = ' '
      WK1_N_SIZE                      = ' '
      WK1_T_FORMAT                    = ' '
      WK1_T_SIZE                      = ' '
      WRITE_LF_AFTER_LAST_LINE        = ABAP_TRUE
    IMPORTING
      FILELENGTH                      =
        tables
          data_tab                        = gt_output
      FIELDNAMES                      =
       exceptions
         file_write_error                = 1
         no_batch                        = 2
         gui_refuse_filetransfer         = 3
         invalid_type                    = 4
         no_authority                    = 5
         unknown_error                   = 6
         header_not_allowed              = 7
         separator_not_allowed           = 8
         filesize_not_allowed            = 9
         header_too_long                 = 10
         dp_error_create                 = 11
         dp_error_send                   = 12
         dp_error_write                  = 13
         unknown_dp_error                = 14
         access_denied                   = 15
         dp_out_of_memory                = 16
         disk_full                       = 17
         dp_timeout                      = 18
         file_not_found                  = 19
         dataprovider_exception          = 20
         control_flush_error             = 21
         others                          = 22
      if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
             with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      endif.
    Regards
    Rajesh Kumar

  • How to  see request no in master data objects

    Hi Experts,
    In My scenario loading master data to Infoobject with delta update.
    How to do the repeat delta? in case of delta failed.
    Where to se the failed request.
    i need it urgent ,please help me in this regard.
    Thanks,
    Bala

    Hi
    In the infopackage which loads the master data , there is a monitor option in the top. Choose this option and give a date range. You can see here the list of all requests failed/ success/still pending
    From here, if certain requests failed for delta, you can go to PSA and right click on PSA and update immediately
    Hope this helps
    Regards
    N Ganesh

Maybe you are looking for