How to see the record stored in multiple table

please send me the

Hi,
You can do it like this:
DECLARE
rec_count NUMBER;
BEGIN
FOR tbl_cur IN (SELECT table_name from user_tables)
LOOP
  EXECUTE IMMEDIATE 'SELECT COUNT(*) FROM '||tbl_cur.table_name INTO rec_count;
  IF rec_count >0 THEN
    DBMS_OUTPUT.PUT_LINE(tbl_cur.table_name||' has data.');
  ELSE
    DBMS_OUTPUT.PUT_LINE(tbl_cur.table_name||' has no data.');
  END IF;
END LOOP;
END;**not tested**
Regards
Avinash

Similar Messages

  • How to see the datas stored in DBMS_SQL.Varchar2S variable?

    how to see the datas stored in DBMS_SQL.Varchar2S variable?
    it says error if i use dbms_out.put_line.

    in PLSQL :
    procedure p_try (p_test IN OUT DBMS_SQL.VARCHAR2S) is
    begin
        p_test.delete ;
        p_test(    -3000) := '===============' ;
        p_test(       22) := 'Hello'  ;
        p_test(    55555) := 'World' ;
        p_test(987654321) := '===============' ;
    end p_try;
    set serveroutput on
    declare
         l_test dbms_sql.varchar2s ;
         i number ;
    begin
         p_try (l_test) ;
         i :=  l_test.first ;
         while i >= l_test.first and i <= l_test.last loop
                 dbms_output.put_line (l_test(i)) ;
                 i := l_test.next(i) ;
         end loop ;
    end ;
    ===============
    Hello
    World
    ===============when using Forms, you would use TEXT_IO instead of DBMS_OUTPUT

  • How to see the records through infoset

    I have created infoset with infocube and master table,how to see the records in infoset?
    Thanks
    Gnanasundaram C

    Hi Gnanasundaram
    Just execute the t-code RSISET and click on infoset display data  button it will take you to the records.
    Hope its clear a little..!
    Thanks
    K M R
    >
    Gnanasundaram.c wrote:
    > I have created infoset with infocube and master table,how to see the records in infoset?
    >
    > Thanks
    > Gnanasundaram C

  • How to check the records in Master Data Table?

    Hi,
       I am trying to load the Master Data Table using the Flat File.Now how to check the records in Master Data Table?
    I done the following way:
    Info Provider->Info Object->Right Click->Display Data or Maintain Master Data
    But it's not showing the records.It's asking like CID from......To......
                                                                        CID(SID)from.............To.......
                                                                         here CID means customer id(characteristic).
    and showing some settings.
    Please guide me.
    Thanks & Regards

    Hi Sri,
    Go to T- code RSD1 and type your info object name and open the P- table in the infoobject then select execute symbol to see the updated  data in to master data info object.
    regards
    sap

  • How to convert the record stored iin byte array to integers

    im making a simple game in j2me and i want to get the max scores and show it for each player , what i face right now that i cant convert the records which i stored in bytes to integers when i read it from file to get the max.
    thanks

    have a look at java.io.DataInputStream

  • How to access the data stored in Java tables in E-Commerce 7.0

    For the CRM E-Commerce 7.0 Web shop all the data related order templates, Shop Id and catalog variants are not getting stored in CRM tables. Can anyone please let us know where all the details are getting stored.
    By searching here, in SDN Forum we found that these details are getting stored in some java tables. If this is true  kindly let us know the following points.
    1). How can we access these tables.
    2).Where these java tables are stored .
    3).Do we have authorizations to check and modify these tables.
    4).If we donu2019t have authorizations to check and modify these tables, how can we get the access to them.
    4).How can we write Database Queries to retrieve the data from these tables.

    I am afraid, all these three entities are in CRM tables.
    Web Shops - Function module CRM_ISA_SHOP_GETLIST, Table crmm_isa_shop_h
    Catalog Variants - Function module - COM_PRDCAT_GET_VARIANTS (they are also stored in CRM tables) for a given catalog.
    Now for the Order Templates - They are technically order objects with system status set to "Order Template" I1034. You should be able to see them in CRM tables alongwith other orders... crmd_orderadm_h and etc...

  • How to see the data stored in the t.code: cat2.

    Hi All
    I am doing Userexits
    here using CATS0006 exit.and T.code CAT2 i am entering values and i saved, it's showing data is saved.
    but i am not able to see that values, where it will store the data.
    Regards....

    Hi Chinna,
    The entries are stored in the CATSDB table.. you can do a look up by PERNR, DATE & Attendance/Absence type on this table to see what you have saved voa CAT2 transaction.
    Regards,
    Suresh Datti

  • How to restrict the record selection for PLPO table .

    Hi,
    Am selecting 'plnnr' and 'vornr' from PLPO table . For one Plnnr their are multiple Vornr including 0001 & 9999.
    I want to select only those entries which have only Vornr 0001 & 9999.
    Ex : 1) Plnnr - 5689
               Vornr - 0001,2536,8989,9999
           2) Plnnr - 8787
               vornr -  0001
           3) Plnnr - 5936
               vornr -  9999
           4) Plnnr - 2345
               vornr -  0001,9999
    Here for this example i want to select only the entry with Plnnr = 2345 as it only contains 0001 & 9999.
    Can any one let me know how to get this in a select query.
    Your help is much appreciated.
    Thanks in advance.   
    Ravi Kasnale.

    Hi
    Try with below code
    RANGES:r_vornr FOR plpo-vornr.
    TYPES:BEGIN OF ty_plpo,
    plnnr TYPE plpo-plnnr,
    vornr TYPE plpo-vornr,
    END OF ty_plpo.
    DATA:it_plpo_temp TYPE STANDARD TABLE OF ty_plpo.
    DATA:it_plpo TYPE STANDARD TABLE OF ty_plpo.
    DATA:it_plpo_temp1 TYPE STANDARD TABLE OF ty_plpo.
    DATA:wa_plpo_temp1 TYPE ty_plpo.
    DATA:v_line TYPE sy-tabix.
    START-OF-SELECTION.
      r_vornr-sign = 'I'.
      r_vornr-option = 'EQ'.
      r_vornr-low = '0000'.
      CLEAR:r_vornr-high.
      APPEND r_vornr.
      r_vornr-sign = 'I'.
      r_vornr-option = 'EQ'.
      r_vornr-low = '9999'.
      CLEAR:r_vornr-high.
      APPEND r_vornr.
      SELECT plnnr vornr FROM plpo INTO TABLE it_plpo_temp1 WHERE vornr IN r_vornr.
      CLEAR:it_plpo[].
      LOOP AT it_plpo_temp1 INTO wa_plpo_temp1.
        CLEAR:it_plpo_temp[].
        it_plpo_temp[] = it_plpo_temp1[].
        DELETE it_plpo_temp WHERE plnnr <> wa_plpo_temp1-plnnr.
        DESCRIBE TABLE it_plpo_temp LINES v_line.
        IF v_line EQ '2'.
          APPEND LINES OF it_plpo_temp TO it_plpo.
        ENDIF.
      ENDLOOP.
      SORT it_plpo BY plnnr.
      DELETE ADJACENT DUPLICATES FROM it_plpo COMPARING plnnr.
    Regards
    Srilaxmi

  • How to add the records of 2 internal table records into one file

    hello experts,
    My scenario is...
    I am retrieving the data for the for the credit, debit and trailer records of the customer into 3 different internal tables and finally i have to append all those records into one file first debit records then credit records finally the trailer record.... how to do that can anyone give some idea plzzzzzzzzz..
    Plz its bit urgent..
    Thanks a lot for your anticipation
    SRI

    Hello,
    Do like this.
    " Assume u have three itab.
    "Itab1 - debit
    "Itab2 - credit
    "Itab3 - Credit.
    REPORT ZV_TEST_SERVER .
    *PARAMETERS: P_FILE TYPE STRING."RLGRAP-FILENAME.
    CALL FUNCTION 'GUI_DOWNLOAD'
      EXPORTING
    *   BIN_FILESIZE                  =
        FILENAME                      = P_FILE
    *   FILETYPE                      = 'ASC'
       APPEND                        = 'X'  " Check here
    *   WRITE_FIELD_SEPARATOR         = ' '
    *   HEADER                        = '00'
    *   TRUNC_TRAILING_BLANKS         = ' '
    *   WRITE_LF                      = 'X'
    *   COL_SELECT                    = ' '
    *   COL_SELECT_MASK               = ' '
    *   DAT_MODE                      = ' '
    * IMPORTING
    *   FILELENGTH                    =
      TABLES
        DATA_TAB                      = ITAB1
    * EXCEPTIONS
    *   FILE_WRITE_ERROR              = 1
    *   NO_BATCH                      = 2
    *   GUI_REFUSE_FILETRANSFER       = 3
    *   INVALID_TYPE                  = 4
    *   NO_AUTHORITY                  = 5
    *   UNKNOWN_ERROR                 = 6
    *   HEADER_NOT_ALLOWED            = 7
    *   SEPARATOR_NOT_ALLOWED         = 8
    *   FILESIZE_NOT_ALLOWED          = 9
    *   HEADER_TOO_LONG               = 10
    *   DP_ERROR_CREATE               = 11
    *   DP_ERROR_SEND                 = 12
    *   DP_ERROR_WRITE                = 13
    *   UNKNOWN_DP_ERROR              = 14
    *   ACCESS_DENIED                 = 15
    *   DP_OUT_OF_MEMORY              = 16
    *   DISK_FULL                     = 17
    *   DP_TIMEOUT                    = 18
    *   FILE_NOT_FOUND                = 19
    *   DATAPROVIDER_EXCEPTION        = 20
    *   CONTROL_FLUSH_ERROR           = 21
    *   OTHERS                        = 22
    IF SY-SUBRC <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    CALL FUNCTION 'GUI_DOWNLOAD'
      EXPORTING
    *   BIN_FILESIZE                  =
        FILENAME                      = P_FILE
    *   FILETYPE                      = 'ASC'
       APPEND                        = 'X'  " Check here
    *   WRITE_FIELD_SEPARATOR         = ' '
    *   HEADER                        = '00'
    *   TRUNC_TRAILING_BLANKS         = ' '
    *   WRITE_LF                      = 'X'
    *   COL_SELECT                    = ' '
    *   COL_SELECT_MASK               = ' '
    *   DAT_MODE                      = ' '
    * IMPORTING
    *   FILELENGTH                    =
      TABLES
        DATA_TAB                      = ITAB2  " Check here
    * EXCEPTIONS
    *   FILE_WRITE_ERROR              = 1
    *   NO_BATCH                      = 2
    *   GUI_REFUSE_FILETRANSFER       = 3
    *   INVALID_TYPE                  = 4
    *   NO_AUTHORITY                  = 5
    *   UNKNOWN_ERROR                 = 6
    *   HEADER_NOT_ALLOWED            = 7
    *   SEPARATOR_NOT_ALLOWED         = 8
    *   FILESIZE_NOT_ALLOWED          = 9
    *   HEADER_TOO_LONG               = 10
    *   DP_ERROR_CREATE               = 11
    *   DP_ERROR_SEND                 = 12
    *   DP_ERROR_WRITE                = 13
    *   UNKNOWN_DP_ERROR              = 14
    *   ACCESS_DENIED                 = 15
    *   DP_OUT_OF_MEMORY              = 16
    *   DISK_FULL                     = 17
    *   DP_TIMEOUT                    = 18
    *   FILE_NOT_FOUND                = 19
    *   DATAPROVIDER_EXCEPTION        = 20
    *   CONTROL_FLUSH_ERROR           = 21
    *   OTHERS                        = 22
    IF SY-SUBRC <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    CALL FUNCTION 'GUI_DOWNLOAD'
      EXPORTING
    *   BIN_FILESIZE                  =
        FILENAME                      = P_FILE
    *   FILETYPE                      = 'ASC'
       APPEND                        = 'X'  " Check here
    *   WRITE_FIELD_SEPARATOR         = ' '
    *   HEADER                        = '00'
    *   TRUNC_TRAILING_BLANKS         = ' '
    *   WRITE_LF                      = 'X'
    *   COL_SELECT                    = ' '
    *   COL_SELECT_MASK               = ' '
    *   DAT_MODE                      = ' '
    * IMPORTING
    *   FILELENGTH                    =
      TABLES
        DATA_TAB                      = ITAB3 " Check here
    * EXCEPTIONS
    *   FILE_WRITE_ERROR              = 1
    *   NO_BATCH                      = 2
    *   GUI_REFUSE_FILETRANSFER       = 3
    *   INVALID_TYPE                  = 4
    *   NO_AUTHORITY                  = 5
    *   UNKNOWN_ERROR                 = 6
    *   HEADER_NOT_ALLOWED            = 7
    *   SEPARATOR_NOT_ALLOWED         = 8
    *   FILESIZE_NOT_ALLOWED          = 9
    *   HEADER_TOO_LONG               = 10
    *   DP_ERROR_CREATE               = 11
    *   DP_ERROR_SEND                 = 12
    *   DP_ERROR_WRITE                = 13
    *   UNKNOWN_DP_ERROR              = 14
    *   ACCESS_DENIED                 = 15
    *   DP_OUT_OF_MEMORY              = 16
    *   DISK_FULL                     = 17
    *   DP_TIMEOUT                    = 18
    *   FILE_NOT_FOUND                = 19
    *   DATAPROVIDER_EXCEPTION        = 20
    *   CONTROL_FLUSH_ERROR           = 21
    *   OTHERS                        = 22
    IF SY-SUBRC <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    If useful reward.
    Vasanth

  • How to change the same cell in multiple tables at the same time

    help if you can,
    i have a workbook
    workbook has 10 sheets
    each sheet has 1 table
    when in excel you were able to select a sheet then hold control and select another, this would group the sheet as if to make them the same. change a single cell in one of the sheets and this changed cell would be also be changed in all grouped sheets. is there the same functionality in numbers?

    It's funny.
    This question was asked several times in the last ten days.
    The feature is unavailable.
    _Go to "Provide Numbers Feedback" in the "Numbers" menu_, describe what you wish.
    Then, cross your fingers, and wait _at least_ for iWork'10
    Yvan KOENIG (VALLAURIS, France) jeudi 8 octobre 2009 18:57:14

  • How to see the views created on a table

    Dear all,
    Please let me know the procedure to find out "the views created on a perticular table"

    CKPT wrote:
    Did OP mentioned ? :(
    change the query as
    select a.view_name,b.table_name from dba_views a, dba_tables b where a.owner='user1' b.owner='user2' and b.table_name='table' and a.owner='user';simpleWhat is that query supposed to return ?
    <s>It will do a scalar product between DBA_VIEWS and DBA_TABLES returning one single table name for every single view over your db without any link together except they have the same owner. Very useful, very helpful.</s><br>
    I misread the query, it is even worse than I thought, the query will return nothing. Nothing because a.owner cannot be equal to user1 and to user in the same time.
    I think Girish give a much better solution with DBA_DEPENDENCIES.
    Nicolas.
    Edited by: N Gasparotto on Aug 12, 2010 12:48 PM

  • How can I convert string to the record store with multiple records in it?

    Hi Everyone,
    How can I convert the string to the record store, with multiple records? I mean I have a string like as below:
    "SecA: [Y,Y,Y,N][good,good,bad,bad] SecB: [Y,Y,N][good,good,cant say] SecC: [Y,N][true,false]"
    now I want to create a record store with three records in it for each i.e. SecA, SecB, SecC. So that I can retrieve them easily using enumerateRecord.
    Please guide me and give me some links or suggestions to achieve the above thing.
    Best Regards

    Hi,
    I'd not use multiple records for this case. Managing more records needs more and redundant effort.
    Just use single record. Create ByteArrayOutputStream->DataOutputStream and put multiple strings via writeUTF() (plus any other data like number of records at the beginning...), then save the byte array to the record...
    It's easier, it's faster (runtime), it's better manageable...
    Rada

  • HT1351 when my iphone 5 is connected, i can't see the content in itunes library.  when i have an older ipod plugged in, there is a button to view what's on the ipod but not iphone.  how do i see the music stored on iphone 5 in itunes??

    When i connect my iphone 5 to cpu, i cant figure out how to see the music held on phone.  When I click the "iphone" icon, it pulls up the options (summary, info, music, apps, etc) but when i click music, it just gives sync options.  When i plug in an older ipod, there's an option to see what's on the ipod but not with my iphone 5.  how do i see the music stored on my iphone in itunes?

    There is a OneClickdigital ereader available in the App Store. Download that to your iPod to read pdfs and books from the library. And you might need to download the OneClickdigital eaudio player to listen to audiobooks from the library. Once both are downloaded sync you iPod again to transfer them.

  • How to see the data records for a dso based upon the request id?

    Hi all,
    How to see the data records based upon the request id on the dso.
    I need to see the data for a dso based upon the request id 444493 loaded from another dso through repair full update.
    thanks

    Hi,
    Step 1: select your request from DSO request tb
    Step 2: Select your DSO just above your contents/requests/reconstruction tabs
    Step 3: Click contents(Spectacles symbol) in the top area of your screen
    Step 4: Slect the required fields
    Regards,
    Suman

  • How to do the Record Level commit in DB Adapter

    Hi,
    I am using Oracle JDeveloper 11.1.1.6.0 and SOA server 11.1.1.6
    Problem Description_
    I am fetching multiple records using File Adapter in BPEL process, After Fetching I am writing those records in Database using Database Adpter.
    If any error records comes the database adpater rollback the complete transaction and none of the records is inserted into the Database.
    **Can anyone please tell me how to do the record level commit in Database Adapter so that All the success records can be inserted into the database except the Failure record*.*
    I dont want to call the Database adpater in loop multiple times to insert each record as it hampers the performance.
    Thanks in Advance
    Sunil

    I believe you are polling a file and inside the BPEL, inserting the records into the database using the database adapter.
    so according to your requirement you can do any one of the following things...
    1. Instead of using the database adapter for inserting the record, you can call a Stored Procedure which it takes the record fields as input and it inserts the record into the table and does a commit at the end. when you follow this approach, make sure your data source is defined as Non-XA, otherwise you will face some errors.
    2. If you are using the database adapter insert operation only, inside the BPEL, for the partnerlink of the database adapter, go to the properties and for the property "idempotent", give a value of false.
    by doing this, what happens means, after calling the database adapter from BPEL through the invoke activity, the transaction is committed and from the next activity i mean after the invoke, a new transaction will be started but it will use the same thread though
    3. If you are using the database adapter insert operation only, inside the BPEL, for the partnerlink of the database adapter, go to the properties and for the property "NonBlockingInvoke", give a value of true.
    by doing this, what happens means, the database adapter insert operation will happen in a separate transaction and it will be committed, inside the BPEL after the invoke activity, a new thread and transaction will be started
    4. Also, if you are using the database adapter insert operation, don't follow the steps as mentioned in either 2 or 3, you can simply put a dehydrate activity after the invoke activity.
    According to your requirement, all the four approaches works. But my personal feeling, don't go for 4, instead 1 is better, 2 or 3 is also good.
    Hope this helps,
    N

Maybe you are looking for