How to select only one row

hello,
i've got a select query which returns a couple of rows.
now i would like for the query to return only one row (the first match it can find).
how do i do that?
thank you!
my sample of my data as below , the first and seconde record is equal and i want to display all the colomn for the first row and ignore the second row .
84A8E46E8C97     9410     20110812
84A8E46E8C97     9420     20110813
84A8E46E8C6E     9410     20110816
84A8E46E8AFA     9400     20110819

876602 wrote:
my sample of my data as below , the first and seconde record is equal and i want to display all the colomn for the first row and ignore the second rowThere is no row order in relational database tables. Same query canreturn rows in different order next time you run it unless you specify ORDER BY. Only ORDER BY guarantees order, so when you say first row/second row you must provide ordering criteria.
SY.

Similar Messages

Selecting only one row at a time

Hi experts,
i have following doubt regarding selecting rows from a db:
Is there any way of selecting only one row AT A TIME from a dabase just to collect the data in rows instead of in a unique document containing all the rows?
I would like you to ellaborate on this as i need to send only one row to the IE, and then other row, and so on... without throwing any error!
I have seen that there are SELECT SINGLE and SELECT UP TO 1 ROW, but these two methods are only useful when retrieving only one row, and that does not match my requirements. I need to process all the rows but one by one..
I know that we can use the receiver jdbc adapter as if it was a sender by means of its specific datatype, but how to do it row by row??
Hope i had explained well..
Thanks in advance and best regards,
David

Hi kiran,
Yes, my table has 5 not null fields but i am selecting and updating fixes values so i think that I will definetely go for the next solution:
SELECT * FROM t1 WHERE status='0' and ROWNUM<2;
UPDATE t1 SET status='1' WHERE status='0' and ROWNUM<2;
My only concern is if the update will take the same row that the select.... BTW, I think it will
..What do you guys think?
I ve been trying to operate with your proposed queries but i received some errors. Your queries are very interesting but i think that with the above ones i meet my requirements as the status field will be 0 for not processed rows and 1 for precessed ones (and the update will look for the row that meets the same 'where' clause than the select, and then, and only then, it will set status='1').
The only thing i have to care about is what i questioned before.
Thanks a lot and best regards,
David

How to select only one record at a time in ALV

Hi all,
I have to use ALV report. Each record on the report output should have a button (or radio button) which will allow the record to be selected. My requirement is to select only one record at a time.
please guide me how to proceed further.
regards
manish

hi
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/snippets/sampleCheckBoxProgram
Regards
Pavan

Oracle database link to MySQL select only one row

Hello,
I have created a connection from the Oracle batabase 11.2 to a MySQL database via database link. The following statement shows, that 35 rows are in the mySQL table:
SQL> select count(*) from "main_pages"@MOREWEB;
COUNT(*)
        35
But a normal select statement only return 1 row.
SQL> select "subject" from "main_pages"@MOREWEB;
subject
Übersicht: Referenzen
I am using the mysql-connector-odbc-3.51.30-winx64 driver. A newer version cann't be installed because on Windows Server 2008 R2 I get an error with an missing dll-file. The DataDirect-ODBC-driver is not possible, because we like to use the free MySQL-database an DataDirect only support the enterprise edition.
I also have tried to limit the HS_OPEN_CURSORS or dont limit the HS_FDS_FETCH_ROWS, but there is no difference in the result. I always get only one row.
HS Init.ora
# This is a sample agent init file that contains the HS parameters that are
# needed for the Database Gateway for ODBC
# HS init parameters
HS_FDS_CONNECT_INFO = moreweb
HS_FDS_TRACE_LEVEL = ON
HS_FDS_FETCH_ROWS=1
# Environment variables required for the non-Oracle system
#set <envvar>=<value>
HS tracefile
Oracle Corporation --- MITTWOCH   NOV 05 2014 13:56:22.066
Heterogeneous Agent Release
11.2.0.1.0
Oracle Corporation --- MITTWOCH   NOV 05 2014 13:56:22.066
    Version 11.2.0.1.0
HOSGIP for "HS_FDS_TRACE_LEVEL" returned "ON"
HOSGIP for "HS_OPEN_CURSORS" returned "50"
HOSGIP for "HS_FDS_FETCH_ROWS" returned "1"
HOSGIP for "HS_LONG_PIECE_TRANSFER_SIZE" returned "65536"
HOSGIP for "HS_NLS_NUMERIC_CHARACTER" returned ".,"
HOSGIP for "HS_KEEP_REMOTE_COLUMN_SIZE" returned "OFF"
HOSGIP for "HS_FDS_DELAYED_OPEN" returned "TRUE"
HOSGIP for "HS_FDS_WORKAROUNDS" returned "0"
HOSGIP for "HS_FDS_MBCS_TO_GRAPHIC" returned "FALSE"
HOSGIP for "HS_FDS_GRAPHIC_TO_MBCS" returned "FALSE"
HOSGIP for "HS_FDS_RECOVERY_ACCOUNT" returned "RECOVER"
HOSGIP for "HS_FDS_TRANSACTION_LOG" returned "HS_TRANSACTION_LOG"
HOSGIP for "HS_FDS_TIMESTAMP_MAPPING" returned "DATE"
HOSGIP for "HS_FDS_DATE_MAPPING" returned "DATE"
HOSGIP for "HS_FDS_CHARACTER_SEMANTICS" returned "FALSE"
HOSGIP for "HS_FDS_MAP_NCHAR" returned "TRUE"
HOSGIP for "HS_FDS_RESULTSET_SUPPORT" returned "FALSE"
HOSGIP for "HS_FDS_RSET_RETURN_ROWCOUNT" returned "FALSE"
HOSGIP for "HS_FDS_PROC_IS_FUNC" returned "FALSE"
HOSGIP for "HS_FDS_REPORT_REAL_AS_DOUBLE" returned "FALSE"
using mpgw as default value for "HS_FDS_DEFAULT_OWNER"
HOSGIP for "HS_SQL_HANDLE_STMT_REUSE" returned "FALSE"
SQL text from hgopars, id=1, len=36 ...
     00: 53454C45 43542043 4F554E54 282A2920 [SELECT COUNT(*) ]
     10: 46524F4D 20606D61 696E5F70 61676573 [FROM `main_pages]
     20: 60204131                             [` A1]
Deferred open until first fetch.
Performing delayed open.
SQL text from hgopars, id=1, len=40 ...
     00: 53454C45 43542041 312E6073 75626A65 [SELECT A1.`subje]
     10: 63746020 46524F4D 20606D61 696E5F70 [ct` FROM `main_p]
     20: 61676573 60204131                    [ages` A1]
Deferred open until first fetch.
Performing delayed open.
Please can help me someone.
Thanks.
Bianca

mxallen wrote:
Bianca,
If you log directly into MySQL and issue the same query (select "subject" from "main_pages";) what data is returned?
I looks to me that you count is the number of rows in the entire table "main_pages"
while you select is for the data in the "subject" column only.
This seems to indicate that you have just one row in that subject column.
Regards,
Matt
WHAATT?
What do you mean by "just one row in that subject column"?
That makes no sense at all. A row is a row. A column is a part of a row. All rows have all columns, though not all columns of all rows will necessarily have an assigned value. Lacking a WHERE clause to filter rows, any SELECT should return all rows.

How to restrict only one row in Table ??.

Hi all,
i want to restrict no. of rows to one,
that is not more that one row should be there in the table.
Following trigger works well in all conditions
except:
insert into myTab select 'x' from emp;
inserts 14 rows.
Create or replace trigger one_row_myTab
before insert on myTab
for each row
declare
cnt number;
pragma AUTONOMOUS_TRANSACTION;
Begin
select count(*) into cnt from mydual;
if cnt=1 then
raise_application_error(-20001,'MyDual Can have only one Row');
end if;
end;
i think with trigger it w't be possible because,
same transaction triggers c't query the table (Mutating Table),
Autonomus trans ca't identify uncommited changes.
pls add your suggestions.
Thanks for Reading the Post.
Rajashekhar Ganga,
mail : [email protected]

nice try Mulder ! it doesn't work everywhere...
SQL> connect scott/tiger@lsc69
Connected to:
Oracle7 Server Release 7.3.4.5.0 - Production
With the distributed and parallel query options
PL/SQL Release 2.3.4.5.0 - Production
SQL> create table d as select * from dual;
Table created.
SQL> create index i on d(1);
create index i on d(1)
ERROR at line 1:
ORA-00904: invalid column name
SQL> connect scott/tiger@lsc65
Connected to:
Oracle8i Enterprise Edition Release 8.1.7.4.0 - 64bit Production
JServer Release 8.1.7.4.0 - 64bit Production
SQL> create table d as select * from dual;
Table created.
SQL> create index i on d(1);
Index created.
SQL> connect scott/tiger@lsc68
Connected to:
Oracle Database 10g Enterprise Edition Release 10.1.0.3.0 - 64bit Production
With the Partitioning and Data Mining options
SQL> create table d as select * from dual
Table created.
SQL> CREATE UNIQUE INDEX i on d(1);
CREATE UNIQUE INDEX i on d(1)
ERROR at line 1:
ORA-03113: end-of-file on communication channel

I can select only one row in my table why?

hi.. i have just started cold fusion. i am trying to connect
my database. its ok. but i can see only one row? why?
ff4.cfm =>
<cfquery name = "myFirstSelect" datasource="calisma">
select * from fuat1
</cfquery>
ff5.cfm =>
<cfinclude template="ff4.cfm">
<table>
<cfoutput query="myFirstSelect">
<tr height="20" onMouseOver="this.bgColor='#colorlist#';"
onMouseOut="this.bgColor='#colorrow#';" bgcolor="#colorrow#">
<td>AD</td>
<td>SOYAD</td>
<td>NUMBER</td>
</tr>
<tr height="20" onMouseOver="this.bgColor='#colorlist#';"
onMouseOut="this.bgColor='#colorrow#';" bgcolor="#colorrow#">
<td>#AD#</td>
<td>#SOYAD#</td>
<td>#NUMBER#</td>
</tr>
</table>
</cfoutput>
i can retrieve only one row. Cannot access the second row of
table. What can I do? What can I reach the second row?
thankx

ok i solve this problem thanx

How to display only one row in report when...

Hi,
I've a report display in which i've 3 fields EBELN, LIFNR , MENGE. EBELN, LIFNR are from EKKO table and MENGE id from EKPO table .
         On clicking the EBELN there will be getting another report in which we get EBELN,EBELP and MATNR and MENGE from EKPO table .
       The problem is while displaying 1st report if the purchase order has two items in EKPO table then its displaying two times. How can i get only one time and the MENGE should be sum of those two item prices.

hi use the statement not to get the multiple items..
sort itab by ebeln.
delete adjacent duplicates from itab comparing vbeln.
i will give u an example to get the total and subtotal ....
*& Report ZR_A1
REPORT ZR_A1
        NO STANDARD PAGE HEADING.
Tables declarations
TABLES: VBAK, VBAP.
Variable declarations
DATA: C1 TYPE C.
Internal Table declarations*
DATA: BEGIN OF IT_VBAK OCCURS 0,
      VBELN LIKE VBAK-VBELN,
      VKORG LIKE VBAK-VKORG,
      VTWEG LIKE VBAK-VTWEG,
      SPART LIKE VBAK-SPART,
      END OF IT_VBAK.
DATA: BEGIN OF IT_VBAP OCCURS 0,
      VBELN LIKE VBAP-VBELN,
      POSNR LIKE VBAP-POSNR,
      MATNR LIKE VBAP-MATNR,
      NETWR LIKE VBAP-NETWR,
      BRGEW LIKE VBAP-BRGEW,
      NTGEW LIKE VBAP-NTGEW,
      END OF IT_VBAP.
DATA: BEGIN OF IT_FINAL OCCURS 0,
      VBELN LIKE VBAK-VBELN,
      VKORG LIKE VBAK-VKORG,
      VTWEG LIKE VBAK-VTWEG,
      SPART LIKE VBAK-SPART,
      POSNR LIKE VBAP-POSNR,
      MATNR LIKE VBAP-MATNR,
      NETWR LIKE VBAP-NETWR,
      BRGEW LIKE VBAP-BRGEW,
      NTGEW LIKE VBAP-NTGEW,
END OF IT_FINAL.
Selection-screen design
SELECTION-SCREEN: BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-R01.
SELECT-OPTIONS: S_VBELN FOR VBAK-VBELN.
SELECTION-SCREEN: END OF BLOCK B1.
TOP-OF-PAGE.
FORMAT INTENSIFIED ON COLOR 5.
WRITE:/7 'LIST TO DISPLAY SALES ITEM INFO'.
START-OF-SELECTION.
Populating it_vbak table
SELECT VBELN
       VKORG
       VTWEG
       SPART
       FROM VBAK
       INTO TABLE IT_VBAK
       WHERE VBELN IN S_VBELN.
populating it_vbap table
IF NOT IT_VBAK[] IS INITIAL.
SELECT VBELN
        POSNR
        MATNR
        NETWR
        BRGEW
        NTGEW
        FROM VBAP
        INTO TABLE IT_VBAP
        FOR ALL ENTRIES IN IT_VBAK
        WHERE VBELN = IT_VBAK-VBELN.
ENDIF.
populating the final list
LOOP AT IT_VBAP.
READ TABLE IT_VBAK WITH KEY VBELN = IT_VBAP-VBELN.
IF SY-SUBRC = 0.
MOVE: IT_VBAK-VBELN TO IT_FINAL-VBELN,
       IT_VBAK-VKORG TO IT_FINAL-VKORG,
       IT_VBAK-VTWEG TO IT_FINAL-VTWEG,
       IT_VBAK-SPART TO IT_FINAL-SPART,
       IT_VBAP-POSNR TO IT_FINAL-POSNR,
       IT_VBAP-MATNR TO IT_FINAL-MATNR,
       IT_VBAP-NETWR TO IT_FINAL-NETWR,
       IT_VBAP-BRGEW TO IT_FINAL-BRGEW,
       IT_VBAP-NTGEW TO IT_FINAL-NTGEW.
APPEND IT_FINAL.
ENDIF.
ENDLOOP.
SORT IT_FINAL BY VBELN.
LOOP AT IT_FINAL.
AT FIRST.
FORMAT INTENSIFIED ON COLOR 1.
WRITE:/35 'SALES DOCUMENT ITEM LIST'.
ULINE AT (100).
*endat.
FORMAT INTENSIFIED ON COLOR 5.
WRITE:/ SY-VLINE,
      2 'SALES.DOCU.NO',
      13 'ITEM',
      21 'MATERIAL',
      50 'NET-VAL',
      65 'GROSS-WT',
      82 'NET-WT',
      100 SY-VLINE.
ENDAT.
FORMAT INTENSIFIED ON COLOR 2.
WRITE:/ SY-VLINE,
       2   C1 AS CHECKBOX,
       5 IT_FINAL-VBELN,
      13 IT_FINAL-POSNR,
      21 IT_FINAL-MATNR,
      41 IT_FINAL-NETWR,
      56 IT_FINAL-BRGEW,
      71 IT_FINAL-NTGEW,
      100 SY-VLINE.
AT END OF VBELN.
SUM.
FORMAT INTENSIFIED ON COLOR 3.
WRITE:/    SY-VLINE,
         30   'SUB-TOTAL:',
         41   IT_FINAL-NETWR,
         56   IT_FINAL-BRGEW,
         71   IT_FINAL-NTGEW.
   WRITE:/100 SY-VLINE.
ENDAT.
AT LAST.
SUM.
FORMAT INTENSIFIED ON COLOR 6.
WRITE:/ SY-VLINE,
          30 'GRAND-TOTAL:',
          41 IT_FINAL-NETWR,
          56 IT_FINAL-BRGEW,
          71 IT_FINAL-NTGEW.
WRITE:/100 SY-VLINE.
ENDAT.
ENDLOOP.
regards,
venkat .

How to remove only one row from the database using labview6.1

using labview 6.1 I create a table with various rows and columns and store bulk of data's in them.,, what procedure should I follow to remove only one paticular row from the database? Help me out with an example please,,
Thanking you in advance!

Hi,
If you have the database toolkit you can delete a row using just a SQL Query to "DB Tools Execute Query.VI"
Example:
DELETE FROM Table name Where SerialNum='Value' And Date='Value' And Time='Value'
See also attached VI
Best Regards
Johan
Attachments:
Delete_a_row_in_a_database_table.vi ‏48 KB

How to make only one row detail disclosed in uix:TableDetail

I display row details to user with <uix:TableDetail>. I'd like to have only one detail displayed in the same time. When the page first loads, all details should be hidden, but whe user shows one another detail and one is already disclosed, only the new one should be displayed.
I use <bc4juix:Table> and JDev 9.0.3.2
Thanks in advance

Viliam,
The <table> element has the detailDisclosure complex attribute that you should use to control whether the details for table rows are disclosed. You should databind the detailDisclosure attribute to some DataObjectList that has the "disclosed" key set for each DataObject in the list. Then, when you disclose a new row, you should modify the DataObject for the corresponding row in the DataObjectLlist, and ensure that all other DataObjects set the "disclosed" key to false.
Hope this helps,
Ryan

How to set only one row selection in ALV GRID DISPLAY

How to set single row selection in grid display
not multiselection.

Hi,
In the USER COMMAND, build the code to check the REFRESHED Data & then check the number of records with SEL = 'X'.
If more than single entry found, then raise an error message.
Best regards,
Prashant

Selecting only one row from a query

Hi,
I am using database version 10.2.0.4.0
I have 2 tables:
artist(artistid, artistname, titleid)
trans(transid, datesold, salesprice, titleid, artistid)
This is what i used and got the below results.
SELECT max(worksold) AS mostworksold
FROM (
SELECT artistname, COUNT(t.artistid) AS worksold
FROM table.artist a, table.trans t
WHERE a.artistid = t.artistid
GROUP BY artistname
MOSTWORKSOLD
12
However I also want to show the artist name who sold the most work. So i added artist name in the select, but the result came out very different.
SELECT artistname, max(worksold) AS mostworksold
FROM (
SELECT artistname, COUNT(t.artistid) AS worksold
FROM table.artist a, table.trans t
WHERE a.artistid = t.artistid
GROUP BY artistname
group by artistname;
ARTISTNAME MOSTWORKSOLD
John 3
Mary 4
Alvin 9
Trevor 5
Jess 12
What should I do to make it show only this?
ARTISTNAME MOSTWORKSOLD
Jess 12
Regards,
Keith
Edited by: 963214 on Oct 5, 2012 10:12 AM
Edited by: 963214 on Oct 5, 2012 10:40 AM

try this... hope this helps...
with xx as(
select '1' as aid,'john' as anm from dual union all
select '2' as aid,'mary' as anm from dual union all
select '3' as aid,'alvin' as anm from dual union all
select '4' as aid,'trevor' as anm from dual union all
select '5' as aid,'jess' as anm from dual
), yy as(
select '1' aid from dual union all
select '2' aid from dual union all
select '2' aid from dual union all
select '3' aid from dual union all
select '3' aid from dual union all
select '3' aid from dual union all
select '4' aid from dual union all
select '4' aid from dual union all
select '4' aid from dual union all
select '4' aid from dual union all
select '4' aid from dual union all
select '5' aid from dual
select x.* from
(SELECT a.anm as nm, COUNT(t.aid) AS worksold
FROM xx a, yy t
WHERE a.aid = t.aid
GROUP BY anm
order by worksold desc) x
where rownum = 1; gives
trevor 5In 2 ^nd^ table, i've considered only 1 column which is actually used. Rest columns are unessential.
Ranit B.
Edited by: ranit B on Oct 6, 2012 12:20 AM

Select event not triggered in table with only one row

Hi all,
I am building a BI VC application where query data is displayed in a table. When the user clicks on a table row another query is then triggered and output in a second table. The output from table 1 is linked to the input of query2/table2 with a select event.
The problem that I am facing is that if there is only one row in table 1, the select event is never triggered. If, however there are two or more rows in the table the select event is triggered and query 2 is executed. I have searched the forums but all I could find on select event problems was how to avoid the initial select event.
Has anyone else experienced this issue and what is the workaround or is this a bug in Visual Composer? We are on VC 7.0 SP19.
Cheers,
Astein Meland

Thanks Chittya,
Yes we have considered this option as well. But as we have more than one table linked together we would like to avoid having to manually click several buttons.
In the end I found Note 1364334 describing bugfixes released in VC 7.0 SP20:
"Normally, when a Visual Composer table is populated from a data service, the first row is selected by default. However, we have found that if only one data row is returned from the data service, this row is not selected by default and cannot be manually selected by clicking on it either."
So I think we will just have to upgrade our Portal to the latest support packs to solve this problem.
Thanks,
Astein

Issue with Selection Listener when the table has only one row

Hi All ,
I have developed a table in which I am using Selection Listener to perform some task when any row is selected.
It is working fine when I have more than 1 row in the table, but when I have only one row in the table , the selection listener do not call the corresponding method in bean.
I understand that selection event will be raised only when the row is changed, but in the use case when only one row is there, what should be done to make the selection listener work ?
In the selection listener I have written code to make the selected row as current row , and perform the required task.
Please suggest a way out for this situation.
Thanks in advance.

Hi,
try removing this attr from table
selectedRowKeys="#{bindings.xxx_VO1.collectionModel.selectedRow}"

ALV - how to make selectable only some rows on an ALV?

Hi my problem is:
I have an ALV GRID as output of a report.
I have to make selectable only few rows based on the contents of a field (showed in a column in the ALV).
Is it possible?
Best Regards, Vincenzo

I did understand, but as i told you there is nothing like that, neither an option nor an event to capture.
Here is the documentation: http://help.sap.com/saphelp_erp2005vp/helpdata/EN/bf/3bd1369f2d280ee10000009b38f889/frameset.htm
Read it and choose what you need and what is in existance.

One to many to return only one row

hi guys,
i have an urgent problem here. i have a sql statement like below;
SELECT ALM_SWAP2_REP.M_TP_RTMFRP0, ALM_SWAP2_REP.M_TP_RTMFRP1,
ALM_SWAP2_REP.M_TP_RTMFRF0, ALM_SWAP2_REP.M_TP_RTMFRF1,
To_Char(TRN_HDR_DBF.M_OPT_FLWFST,'YYYYMMDD') AS VALDATE, ALM_SWAP2_REP.M_TP_RTFXC02,
ALM_SWAP2_REP.M_TP_RTFXC12, TRN_HDR_DBF.M_BRW_NOMU1, TRN_HDR_DBF.M_BRW_NOMU2,
ALM_SWAP2_REP.M_TP_RTAMC02, ALM_SWAP2_REP.M_TP_RTAMC12,
(CASE WHEN PAY_FLOW_DBF.M_LEG = 0 AND '20100831' BETWEEN To_Char(PAY_FLOW_DBF.M_CALC_DATE0,'YYYYMMDD') AND To_Char(PAY_FLOW_DBF.M_CALC_DATE1,'YYYYMMDD') THEN To_Char(PAY_FLOW_DBF.M_CALC_DATE1,'YYYYMMDD') END) AS RCV_DATE,
(CASE WHEN PAY_FLOW_DBF.M_LEG = 1 AND '20100831' BETWEEN To_Char(PAY_FLOW_DBF.M_CALC_DATE0,'YYYYMMDD') AND To_Char(PAY_FLOW_DBF.M_CALC_DATE1,'YYYYMMDD') THEN To_Char(PAY_FLOW_DBF.M_CALC_DATE1,'YYYYMMDD') END) AS PAY_DATE
FROM ALM_SWAP2_REP, TRN_HDR_DBF, PAY_FLOW_DBF WHERE ALM_SWAP2_REP.M_REF_DATA = 456576
AND ALM_SWAP2_REP.M_NB = TRN_HDR_DBF.M_NB
AND ALM_SWAP2_REP.M_NB = PAY_FLOW_DBF.M_TRN_ID
AND ALM_SWAP2_REP.M_NB = 228128
AND '20100831' BETWEEN To_Char(PAY_FLOW_DBF.M_CALC_DATE0,'YYYYMMDD') AND To_Char(PAY_FLOW_DBF.M_CALC_DATE1,'YYYYMMDD')
ORDER BY ALM_SWAP2_REP.M_TRN_GRP, ALM_SWAP2_REP.M_NB
When I join few tables, the results are returned in two rows because I have two records that in table PAY_FLOW_DBF that matches one row in table ALM_SWAP2_REP. I need these two matches but I want it to be returned in only one row without using group by. Pls help me. Thankls

user9274041 wrote:
i have an urgent problem here.http://www.oracle.com/html/terms.html
>
4. Use of Community Services
Community Services are provided as a convenience to users and Oracle is not obligated to provide any technical support for, or participate in, Community Services. While Community Services may include information regarding Oracle products and services, including information from Oracle employees, they are not an official customer support channel for Oracle.
You may use Community Services subject to the following: (a) Community Services may be used solely for your personal, informational, noncommercial purposes; (b) Content provided on or through Community Services may not be redistributed; and (c) personal data about other users may not be stored or collected except where expressly authorized by Oracle
>
Could you explain how something that is for your personal, informational, noncommercial purposes can be urgent?
Or is this a violation of the terms of use and abuse of these forums?

How to select only one row

Similar Messages

Maybe you are looking for