How to select scanner from menu of acrobat pro 9?
The menu item for selecting scanner is shaded and will not let me select a scanner.
Hi Larry,
Please tell me if this is happening with all PDFs or any specific one?
Could you please share the screenshot how is it appearing.
Also, you might repairing Acrobat and update drivers of the scanner as well.
Regards,
Anubha
Similar Messages
-
How to select data from a table using a date field in the where condition?
How to select data from a table using a date field in the where condition?
For eg:
data itab like equk occurs 0 with header line.
select * from equk into table itab where werks = 'C001'
and bdatu = '31129999'.
thanks.Hi Ramesh,
Specify the date format as YYYYMMDD in where condition.
Dates are internally stored in SAP as YYYYMMDD only.
Change your date format in WHERE condition as follows.
data itab like equk occurs 0 with header line.
select * from equk into table itab where werks = 'C001'
and bdatu = <b>'99991231'.</b>
I doubt check your data base table EQUK on this date for the existince of data.
Otherwise, just change the conidition on BDATU like below to see all entries prior to this date.
data itab like equk occurs 0 with header line.
select * from equk into table itab where werks = 'C001'
and <b> bdatu <= '99991231'.</b>
Thanks,
Vinay
Thanks,
Vinay -
How to select data from a table by passing document number from another tab
How to select data from a table by passing document number from another table.
for eg:-
I want to display name, adres, region from ADRC table
by using field delivery document number
Kind Regards,
Shanbagavalli.SHi Shanbagavalli,
There are multiple solutions to this questions a few i will try to answer and then you can take the best required for your requirements.
**Consider that you have a Internal table having document number from other table..
SELECT NAME ADRES REGION FROM ADRC
INTO IT_ADRC
FOR ALL ENTRIES IN IT_DOC
WHERE DOCUMENT_NO = IT_DOC-DOCUMENT_NO.
**Consider that you have 1 document number then
SELECT NAME ADRES REGION FROM ADRC
INTO IT_ADRC
WHERE DOCUMENT_NO = W_DOCUMENT_NO.
Hope this solves your problem.
Regards,
Kunjal -
How to select data from cluster table
hi experts,
I have a report which picks data from bseg (cluster table ) for a month report it is taking around 4 minutes to process.I feel it is not good when take the report after some months.
how to select data from these table???how to declare itab for these cluster tables????can we include any search condition or any other kind of internal table???
please advice.
maniHi Manikandan,
The following code may be helpful to understand how to select the data from cluster table.
Types: Begin of ty_kna1,
Kunnr type kna1-kunnr,
adrnr type kna1-adrnr,
end of ty_kna1,
begin of ty_bseg,
belnr type bseg-belnr,
kunnr type bseg-kunnr,
end of ty_bseg,
begin of ty_final,
belnr type bseg-belnr,
kunnr type kna1-kunnr,
adrnr type kna1-adrnr,
end of ty_final.
Data: it_kna1 type table of ty_kna1,
wa_kna1 type ty_kna1,
it_bseg type table of ty_bseg,
wa_bseg type ty_bseg,
it_final type table of ty_final,
wa_final type ty_final.
Select kunnr adrnr from kna1 into table it_kna1 where....
if sy-subrc = 0.
select belnr kunnr into table it_bseg for all entries in it_kna1 where kunnr = it_kna1-kunnr.
endif.
sort it_kna1 by kunnr.
Loop at it_bseg into wa_bseg.
move wa_bseg-belnr to wa_final-belnr.
read table it_kna1 into wa_kna1 with kunnr = wa_bseg-kunnr binary search.
if sy-subrc = 0.
move: wa_kna1-kunnr to wa_final-kunnr,
wa_kna1-belnr to wa_final-belnr.
endif.
append wa_final to it_final.
clear wa_final.
endloop.
Loop at it_final into wa_final.
write: / wa_final-belnr, wa_final-kunnr, wa_final-adrnr.
endloop.
Reward if useful.
Thankyou,
Regards. -
How to select data from structure
how to select data from structure
Hi Laxman,
Structure holds single record of data. You can acess data by using the syntax <b>Structure-field</b>
Please see sample.
data: wa_mara type mara.
select *
from mara
into wa_mara
up to 1 rows.
endselect.
write:/ wa_mara-mandt,
wa_mara-matnr,
wa_mara-maktl.
if helps plz reward points.
Regards
Bhupal Reddy -
How to select data from Maintance View in Program
Dear All ,
How to select data from Maintance View V_T052 in abap Program.
Regards,
ArchanaTABLES: t179, t179t.
DATA: v_t179_int TYPE TABLE OF v_t179.
SELECT * FROM t179
JOIN t179t ON
t179prodh = t179tprodh
INTO CORRESPONDING FIELDS OF TABLE v_t179_int.
Reward points... -
How to select 2column from 1 column values
Hi All,
How to select 2column from 1 column values
Ex : In Emp they have JOB column
JOB
CLERK
MANAGER
SALESMAN
MANAGER
MANAGER
ANALYST
PRESIDENT
SALESMAN
CLERK
CLERK
ANALYST
CLERK
here i want to get output like as follows
Ex: ejob1 ejob2
ANALYST SALESMAN
ANALYST SALESMAN
Can anyone helps me in this,it is urget
Thanks,Something like
select a.job, b.job from scott.emp a, (select job from scott.emp) b
CLERK CLERK
CLERK SALESMAN
CLERK SALESMAN
CLERK MANAGER
CLERK SALESMAN
CLERK MANAGER
CLERK MANAGER
CLERK ANALYST
CLERK PRESIDENT
CLERK SALESMAN
CLERK CLERK
CLERK CLERK
CLERK ANALYST
CLERK CLERK
SALESMAN CLERK
SALESMAN SALESMAN
SALESMAN SALESMAN
SALESMAN MANAGER
... -
How can i call a plugin from outside of Acrobat Pro.?
Hello All,
Is it possible to call acrobat pro plugins from outside of Acrobat Pro.? I believe it is definitely possible.
I am not able to get any pointers on this. Can someone suggest any pointers on this.
Thanks.The plugins that come with Acrobat or custom ones that you write yourself?
Custome ones.
Call them in what way?
Through an executable. I mean from inside an exceutable.
On what OS platform?
Windows
For what purpose?
Just for fun Actually learning
Thanks for the reply. -
How can I add system font to Acrobat Pro X?
I tried to use "Edit Document Text" Function. There is an error pop-up as " All or part of the selection has no available system font. You cannot add or delete text using the currently selected font.". How can I add system font to Acrobat Pro X?
It is referring to the fonts installed on your computer - to edit text within a PDF you must have the same font installed (i.e. one with the same PostScript name). Acrobat doesn't have a separate way to load fonts, you install them in the normal way through your operating system control panel after downloading/purchasing the font files from a vendor.
-
How to transfer pictures from iphoto on macbook pro to iPad. I have the transfer app on both devices.
Connect the iPad to your MBP and open iTunes. In the photos section of your iPad in iTunes you can choose selected albums, Events or the entire iPhoto library to sync to your iPad.
OT -
How do I install a purchased adobe acrobat pro XL cd to my windows 7 desktop?
How do I install a purchased adobe acrobat pro XL cd to my windows 7 desktop?
Hi Hannah Maddox,
Please let us know that what kind of trouble are you facing in installing Adobe Acrobat software?
Regards,
Rahul Tyagi -
How do I migrate from a 2008 MacBook Pro without a screen to new 2014 MacBook Pro?
How do I migrate from a 2008 MacBook Pro without a video screen to a 2014 Macbook Pro?
Use your backup drive instead. No backup drive, then get a monitor and connect it to your computer. Or take the whole shebang to the Apple Store for help with the transfer. Or you can remove the drive from the old MBP and put it in an external enclosure.
-
How to select text from a webpage
hi. i have firefox for my n900. i would like to know how to select some text from a webpage so i can copy and paste it. thanks for the help. i couldn't it anywhere.
First tap where you want the selection to start. (It might help to zoom in as far as possible first. You can do this using the volume buttons in the newly-released Firefox 1.1rc1.) Then hold the Shift key while pressing the arrow keys on the N900 keyboard to select text.
Note: We are aware that this is not a very user-friendly way to select text, and we hope to include a better design in a future version of mobile Firefox. -
How to select data from an aggregate in a customer exit for a query?
Hi,
I have written a virtual key figure customer exit for a query. Earlier the selection was from the cube, where there was severe performance issue. So I have created an aggregate, activated and have loaded the data.
Now when I select that data I find that the Key table is different in development and production. How do I resolve this.
My code is attached below. The table in developemnt is KEY_100027 and in production is KEY_100004. This code is activated and running in BW development server.
SELECT
F~KEY_1000041 AS K____035
F~KEY_1000271 AS K____035
F~QUANT_B AS K____051
F~VALUE_LC AS K____052
INTO (xdoc_date, xval1, xqty1)
UP TO 1 ROWS
FROM
FROM
*/BIC/E100004 AS F JOIN
/BIC/E100027 AS F JOIN
/BIC/DZMM_CGRNU AS DU
ON FKEY_ZMM_CGRNU = DUDIMID
JOIN /BI0/SUNIT AS S1
ON DUSID_0BASE_UOM = S1SID
JOIN /BI0/SCURRENCY AS S2
ON DUSID_0LOC_CURRCY = S2SID
JOIN /BI0/SMATERIAL AS S3
*ON FKEY_1000042 = S3SID
ON FKEY_1000272 = S3SID
JOIN /BI0/SMOVETYPE AS S4
*ON FKEY_1000043 = S4SID
ON FKEY_1000273 = S4SID
JOIN /BI0/SPLANT AS S5
*ON FKEY_1000044 = S5SID
ON FKEY_1000274 = S5SID
JOIN /BIC/D100004P AS DP
*ON FKEY_100004P = DPDIMID
ON FKEY_100027P = DPDIMID
WHERE
WHERE
( ( ( ( F~KEY_1000041 BETWEEN 20051230 AND 20060630 ) ) AND ( (
( ( ( ( F~KEY_1000271 BETWEEN 20051230 AND 20060630 ) ) AND ( (
S3~MATERIAL = <l_0material> ) ) AND ( (
s2~movetype BETWEEN '101' AND '102' OR
s4~movetype BETWEEN '921' AND '922' OR
s4~movetype BETWEEN '105' AND '106' OR
s4~movetype BETWEEN '701' AND '701' OR
s4~movetype BETWEEN '632' AND '632' ) ) AND ( (
S5~PLANT = <l_0plant> ) ) AND ( (
DP~SID_0RECORDTP = 0 ) ) ) )
GROUP BY
ORDER BY F~KEY_1000271 DESCENDING.
IF sy-subrc NE 0.
EXIT.
ENDIF.
ENDSELECT.
How do I transport the code and make it work?
Whats the reason that the two key fields are different.
I had transported the aggregate from development to production. Activated it and filled the data.
What is the way out? Please help.
Regards,
Annie.Hi Sonu,
The main task is to move the contents of the one internal table to another with some condition.
First sort and delete the duplicate entries from the First Internal table like below :
sort it_tab by material ascending date_modified descending.
delete adjacent duplicates from it_tab.
Then move that Internal table contents to another internal table.
Define another internal table with the same structure as you have first internal table and then
Second Step :
it_itab1 = it_itab.
If you are using seperate Header line and Body then you can do like below :
it_itab1[] = it_itab[].
This will fix the issue.
Please let me know if you need any further explonation.
Regards,
Kittu
Edited by: Kittu on Apr 24, 2009 12:21 PM -
How to select data from one nested table and into another nested table
create or replace
TYPE ctxt_code_rec as object
ctxt_header varchar2(10),
header_description varchar2(300),
status varchar2(30),
adjacent_code varchar2(300),
adjacent_desc Varchar2(400),
adjacent_flag varchar2(4000),
adjacent_text_href varchar2(4000)
create or replace
type ctxt_code_table as table of CTXT_CODE_REC
d_table ctxt_code_table ;
v_tab ctxt_code_table ;
Iam trying to select data from d_table to v_tab
using and bulk collect into
select m.*
bulk collect into p_code_result
from table(l_loop_diag_code_table1)m
order by 1;
Receiving error:
ora 94007 : not enoughvalues
Could you please let me know how to solve it?
Thanks,
in advance>
create or replace
TYPE ctxt_code_rec as object
ctxt_header varchar2(10),
header_description varchar2(300),
status varchar2(30),
adjacent_code varchar2(300),
adjacent_desc Varchar2(400),
adjacent_flag varchar2(4000),
adjacent_text_href varchar2(4000)
create or replace
type ctxt_code_table as table of CTXT_CODE_REC
d_table ctxt_code_table ;
v_tab ctxt_code_table ;
Iam trying to select data from d_table to v_tab
using and bulk collect into
select m.*
bulk collect into p_code_result
from table(l_loop_diag_code_table1)m
order by 1;
Receiving error:
ora 94007 : not enoughvalues
Could you please let me know how to solve it?
>
Not unless you provide the code you are actually using.
There is no definition of 'p_code_result' in your post and you say you 'trying to select data from d_table' but there is no code that loads 'd_table' in what you posted.
And the SELECT query you posted actuall selects from an object named 'l_loop_idag_code_table1' which isn't mentioned in your code.
Post the actual code you are using and all of the structures being used.
Also explain why you even need to use nested tables and PL/SQL for whatever it is you are really doing.
Maybe you are looking for
-
In web console Attestationmenu item not showing,after OIM 9.1.0.1 installation Version: 9.1.0.1860.16 Build 1860.16 thanks.
-
Weblogic domains using same production license...
Hi All, I have couple of questions regarding production weblogic server: 1)Can i have different domains configured in the same solaris box by using single and same weblogic prodution license for all the domains? 2)If the above is possible what are th
-
[SOLVED] Partition (/root too small)
I have a 7gig partition for my /root ...unfortunately this seems too small... Are there any safe / easy ways to beef that partition up..(say to 15gig) without going through the whole install processa gain.....I have plenty of free space on my main p
-
Hi, I want to create a simple X-Y graph in java. Can anybody tell me what are the libraries or packages to be imported. MTalaulikar
-
Security updates for 11.2 Flash Player for Linux?
When attempting to download an update for 11.2 Flash Player for Linux, I saw the note saying that there would be no new development, but security backfixes would continue to be released. I've seen the security warnings for months on my Linux install