How to select username from v$logmnr_contents in oracle 10g
Hi,
Can anyone to provide solution for the below mentioned problem.
I use
select sql_redo,cscn,USERNAME from v$logmnr_contents where sql_redo is not null and operation_code in(1,2,3,7) and seg_type in(0,2) and (seg_owner is null or seg_owner not in('SYS','SYSMAN'));
to select sql_redo,cscn and username from v$logmnr_contents.
I got the sql_redo and cscn properly but username is listed sometimes blank. I need to select the username from v$logmnr to understand which user executes the sql. Please give me a solution immediately because now i am stucked with this problem.
Thanks in advance
Hi,
Please use session_info in your query
Also set this field in where clause to not be as 'UNKNOWN'.
Regards
Mona
Edited by: mona mirbakhsh on Feb 27, 2010 5:23 AM
Similar Messages
-
How to select data from another schema in Oracle-Sqldeveloper?
Hi,
I open two schemas, assumed schema1 and schema2, in SQL-Developer. In the SQL-Edit Area of schema1 I want to select data from schema2. So I did followings:
select * from schema2.table1;
But I got error message: 00942. 00000 - "table or view does not exist"
What could be the problem?Correct place for your question is SQL Developer (Not for general SQL/PLSQL questions)
Oh my bad.. Check previous post.. Its privilege issue.
Message was edited by: Karthick_Arp -
How to recover password from Database link in Oracle 10G
Hi guys,
How can I get a user password from DBLink in Oracle 10G?
From sys.link$ the column "PASSWORD" is empty and the crypted data comming from the new column "PASSWORDX" does not work by using "... identified by values..."
Any idea?
Thanks...Why do you need to know the password? If you need to re-create the link in another database you can use dbms_metadata to generate the DDL for the database link and for a fixed database link the DDL will include an encrypted password that will match the remote database password.
select dbms_metadata.get_ddl('DB_LINK','Link_name','Owner') from sys.dual
On version 9.2 it extracts the actual visible plan text password. On 10g+ encrypted representation in values clause
HTH -- Mark D Powell -- -
How to select data from a table using a date field in the where condition?
How to select data from a table using a date field in the where condition?
For eg:
data itab like equk occurs 0 with header line.
select * from equk into table itab where werks = 'C001'
and bdatu = '31129999'.
thanks.Hi Ramesh,
Specify the date format as YYYYMMDD in where condition.
Dates are internally stored in SAP as YYYYMMDD only.
Change your date format in WHERE condition as follows.
data itab like equk occurs 0 with header line.
select * from equk into table itab where werks = 'C001'
and bdatu = <b>'99991231'.</b>
I doubt check your data base table EQUK on this date for the existince of data.
Otherwise, just change the conidition on BDATU like below to see all entries prior to this date.
data itab like equk occurs 0 with header line.
select * from equk into table itab where werks = 'C001'
and <b> bdatu <= '99991231'.</b>
Thanks,
Vinay
Thanks,
Vinay -
How to select data from a table by passing document number from another tab
How to select data from a table by passing document number from another table.
for eg:-
I want to display name, adres, region from ADRC table
by using field delivery document number
Kind Regards,
Shanbagavalli.SHi Shanbagavalli,
There are multiple solutions to this questions a few i will try to answer and then you can take the best required for your requirements.
**Consider that you have a Internal table having document number from other table..
SELECT NAME ADRES REGION FROM ADRC
INTO IT_ADRC
FOR ALL ENTRIES IN IT_DOC
WHERE DOCUMENT_NO = IT_DOC-DOCUMENT_NO.
**Consider that you have 1 document number then
SELECT NAME ADRES REGION FROM ADRC
INTO IT_ADRC
WHERE DOCUMENT_NO = W_DOCUMENT_NO.
Hope this solves your problem.
Regards,
Kunjal -
How to select data from cluster table
hi experts,
I have a report which picks data from bseg (cluster table ) for a month report it is taking around 4 minutes to process.I feel it is not good when take the report after some months.
how to select data from these table???how to declare itab for these cluster tables????can we include any search condition or any other kind of internal table???
please advice.
maniHi Manikandan,
The following code may be helpful to understand how to select the data from cluster table.
Types: Begin of ty_kna1,
Kunnr type kna1-kunnr,
adrnr type kna1-adrnr,
end of ty_kna1,
begin of ty_bseg,
belnr type bseg-belnr,
kunnr type bseg-kunnr,
end of ty_bseg,
begin of ty_final,
belnr type bseg-belnr,
kunnr type kna1-kunnr,
adrnr type kna1-adrnr,
end of ty_final.
Data: it_kna1 type table of ty_kna1,
wa_kna1 type ty_kna1,
it_bseg type table of ty_bseg,
wa_bseg type ty_bseg,
it_final type table of ty_final,
wa_final type ty_final.
Select kunnr adrnr from kna1 into table it_kna1 where....
if sy-subrc = 0.
select belnr kunnr into table it_bseg for all entries in it_kna1 where kunnr = it_kna1-kunnr.
endif.
sort it_kna1 by kunnr.
Loop at it_bseg into wa_bseg.
move wa_bseg-belnr to wa_final-belnr.
read table it_kna1 into wa_kna1 with kunnr = wa_bseg-kunnr binary search.
if sy-subrc = 0.
move: wa_kna1-kunnr to wa_final-kunnr,
wa_kna1-belnr to wa_final-belnr.
endif.
append wa_final to it_final.
clear wa_final.
endloop.
Loop at it_final into wa_final.
write: / wa_final-belnr, wa_final-kunnr, wa_final-adrnr.
endloop.
Reward if useful.
Thankyou,
Regards. -
How to select data from structure
how to select data from structure
Hi Laxman,
Structure holds single record of data. You can acess data by using the syntax <b>Structure-field</b>
Please see sample.
data: wa_mara type mara.
select *
from mara
into wa_mara
up to 1 rows.
endselect.
write:/ wa_mara-mandt,
wa_mara-matnr,
wa_mara-maktl.
if helps plz reward points.
Regards
Bhupal Reddy -
How to select data from Maintance View in Program
Dear All ,
How to select data from Maintance View V_T052 in abap Program.
Regards,
ArchanaTABLES: t179, t179t.
DATA: v_t179_int TYPE TABLE OF v_t179.
SELECT * FROM t179
JOIN t179t ON
t179prodh = t179tprodh
INTO CORRESPONDING FIELDS OF TABLE v_t179_int.
Reward points... -
How to get username from customer email id.
Hi experts,
How to get username from customer email id.I am using transaction XD02.
I would be thankful for your kind replies .
Regards,
Sachin HadaHi sachin,
Re: Email id field
Regards,
Sravanthi -
How to select 2column from 1 column values
Hi All,
How to select 2column from 1 column values
Ex : In Emp they have JOB column
JOB
CLERK
MANAGER
SALESMAN
MANAGER
MANAGER
ANALYST
PRESIDENT
SALESMAN
CLERK
CLERK
ANALYST
CLERK
here i want to get output like as follows
Ex: ejob1 ejob2
ANALYST SALESMAN
ANALYST SALESMAN
Can anyone helps me in this,it is urget
Thanks,Something like
select a.job, b.job from scott.emp a, (select job from scott.emp) b
CLERK CLERK
CLERK SALESMAN
CLERK SALESMAN
CLERK MANAGER
CLERK SALESMAN
CLERK MANAGER
CLERK MANAGER
CLERK ANALYST
CLERK PRESIDENT
CLERK SALESMAN
CLERK CLERK
CLERK CLERK
CLERK ANALYST
CLERK CLERK
SALESMAN CLERK
SALESMAN SALESMAN
SALESMAN SALESMAN
SALESMAN MANAGER
... -
How to migrate data from MS Access to Oracle???????
how to migrate data from MS Access to Oracle???????
You can use heterogeneous services (HS) connection to MS-Access from Oracle and still use the same PL/SQL (or even a single CTAS statement) or SQL to load directly to Oracle tables. It's transparent, quick and clean as opposed to writing complex control files.
You might have to set the ODBC connection to your Access database and add the details to Oracle listener.
Please let me know if you are not sure how to set up the connection. -
How to insert data from *.dmp file to oracle 11g using Oracle SQL Develope
hi
i backup my database using PL/SQL developer and made *.dmp file
how to insert data from *.dmp file to oracle 11g using Oracle SQL Developer 2.1.1.64
and how to make *.dmp file from sql*plus ?
thanks in advancePl/Sql developer has a config window, there you choose the exec to do the import/export.
Find it and his home version, it may be exp or expdp, the home version is the version of the client where the exp executable is.
Then use the same version of imp or impdp to execute the import, you do not need to use Oracle SQL Developer 2.1.1.64. If you want to use it, you must have the same version in the oracle home that exp/imp of sql developer use. -
How to provide access to v$tables in oracle 10g to user
Hi,
can any one suggest me how to provide access to v$tables in oracle 10g to user .
its requried for auditor.
PLease help me.
regardsuser12009184 wrote:
HI have to provide access to all V$ tables
it required for configuration of new tool.
ThanksYou can grant it the select catalog role to the user. It should provide all the required access to the general v$* & dba_* views.
GRANT SELECT_CATALOG_ROLE TO USER;
Let me know if this helps.
Regards,
Rizwan -
How to Find the Current Instance Id in Oracle 10g
Hi,
how to find the current instance id in oracle 10g studio,
I have the below code :
if (InstanceScreenFlow.processInstance.id.id.indexOf(text : ins.id) < 0) {
/// do something
it is saying that "'processInstance' is not a function"
Thanks,
Brijesh Kumar Singh.Why not just pass in the "id" predefined variable into your screenflow? Once you do that you'll be able to refer to it as "id.id" anywhere inside your screenflow.
Dan -
How do l create a new database in Oracle 10g Express
How do l create a new database in Oracle 10g Express, other than the one that is created on installation?
Hello,
You cannot create a second XE database on the same server.
But, Oracle database can support as many Schema as you want.
"Oracle database" is like "SQL Server Instance" and "Oracle Schema" is like "SQL Server database". I means by this shortcut that for
the end users accessing to different Schemas looks like accessing to different databases.
You can have several applications on the same database. Each application has its own Schema and Datafile (Tablespace) structure.
So on your XE database you can add a new Tablespace and create a new User/Schema as follows:
sqlplus /nolog
connect / as sysdba
create tablespace {color:red}new_tablespace_name{color}
extent management local autoallocate
SEGMENT SPACE MANAGEMENT AUTO
datafile '{color:red}complete_datafile_name{color}' size 100M autoextend on next 10M maxsize unlimited;
create user {color:red}new_schema_name{color} identified by {color:red}password{color}
default tablespace {color:red}new_tablespace_name{color}
temporary tablespace TEMP
quota unlimited on {color:red}new_tablespace_name{color}
grant connect, resource to {color:red}new_schema_name{color};Then you can connect to this new User/Schema as you defined it and create your new structure and load datas.
Hope it can help.
Best regards,
Jean-Valentin
Maybe you are looking for
-
Acrobat 9 Pro: Importing large Word-Documents
Hello together! I have a big problem with my doctorate thesis. I would like to import a large Word-Document (2.28 MB, about 300 pages) into Acrobat 9 Pro. That doesn't work at all. I can't beleave it. Is Adobe even worse than Microsoft?????!!!!!!!! I
-
How do i edit a saved document?
how do I edit a saved document?
-
Tool to make easy code for making pictures in java
e.g. g.drawLine(10,10,50,100) Is there a simple tool where I can draw a line on a screen and that that tool gives me then the right coordinates to put it in the java code? Of course this simple line is just an example. I want to use this to create ad
-
Urgent: MacBook pro boots up in disk utility mode
today, out of the blue it boots up in disk utility mode. I restarted it several times but nothing changed. I runned disk repair and permissions repair and no change. Tried to start in safe mode but it will not. any ideas? My last backup is a month ol
-
I have my laptop turned on when I put it in the port replicator. How do I get it to not hibernate so I can use the PR? Thanks!