How to Send Event Based Notifications in the iRecruitment

Hi,
When internal Employee apply for any job, once the person type changes to the Employee.applicant, supervisor should get the notification. I came to know that we can achive this with the irecruitment events.
But i am not clear about the steps to perform.
Please any one provide the steps to configure this notifications in the irecruitment Module.
Thanks in Advance,
Thanks and Regards,
Joshna.

If you wish to do this via subscribing to one of the seeded iRecruitment workflow events, Anil Passi has written a good article on subscribing to workflow events:
http://oracle.anilpassi.com/workflows-business-events-training-lesson-4-2.html
It's not iRecruitment specific but should get you going.

Similar Messages

  • How to create custom FYI Notification in the iRecruitment Notification Approvals Transaction type

    Dear All,
    Does anyone know how to create a custom FYI Notification using the Notification Apporval Transaction type??
    my requirement is when the Candidate complete filling his personal information and upload required document, a notification should be sent to the recruiter informing that all documents have been uploaded.
    Can anyone tell me how to do that?
    Thanks
    Regards

    Hi,
    Please see this thread.
    Want to send public message to all oracle apps users while instance up
    Re: Want to send public message to all oracle apps users while instance up
    Also, see these docs/links.
    Managing Downtime in Restricted Mode from OAM [ID 364236.1]
    R12 Enabling Applications Maintenance Mode and Preventing User Access [ID 557964.1]
    Downtime and Apache Restricted Mode in Release 12
    http://blogs.oracle.com/stevenChan/2008/03/downtime_and_apache_restricted_1.html
    Thanks,
    Hussein

  • When I send an email notification that the form has been sent I want the receiver to get a copy of the actual filled out form not a ling to the data, how can I make this happen?

    When I send an email notification that the form has been sent I want the receiver to get a copy of the actual filled out form not a ling to the data, how can I make this happen?

    Hi,
    you can find documentation for Designer under this website
    http://help.adobe.com/en_US/livecycle/10.0/documentation.html#task=4,5&module=2
    In Designer you can use the JavaScript API of Acrobat.
    So the Devnet for Acrobat is also a good source.
    http://www.adobe.com/devnet/acrobat.html
    http://www.adobe.com/content/dam/Adobe/en/devnet/acrobat/pdfs/js_api_reference.pdf

  • How to send a mail by ckicking the button using java

    hi,
    how to send a mail by clicking the button (like payroll silp in that contain one button if we click that it autometically go through the mail as a attachment) pls frd to me my gmail is [email protected]

    Hi,
    It seems we are doing the homework for you; to make you start with something; look at the sample code below and try to understand it first then put the right values
    to send an email with an attachement.
    import java.awt.BorderLayout;
    import java.awt.event.ActionEvent;
    import java.util.Date;
    import java.util.Properties;
    import javax.activation.DataHandler;
    import javax.activation.FileDataSource;
    import javax.mail.Message;
    import javax.mail.MessagingException;
    import javax.mail.Multipart;
    import javax.mail.Session;
    import javax.mail.Transport;
    import javax.mail.internet.InternetAddress;
    import javax.mail.internet.MimeBodyPart;
    import javax.mail.internet.MimeMessage;
    import javax.mail.internet.MimeMultipart;
    import javax.swing.AbstractAction;
    import javax.swing.Action;
    import javax.swing.JButton;
    import javax.swing.JComponent;
    import javax.swing.JFrame;
    import javax.swing.JTextField;
    public class Main {
          * @param args
         public static void main(String[] args) {
              // Create the frame
              String title = "Frame Title";
              JFrame frame = new JFrame(title);
              // Create a component to add to the frame
              JComponent comp = new JTextField();
              Action action = new AbstractAction("Button Label") {
                   // This method is called when the button is pressed
                   public void actionPerformed(ActionEvent evt) {
                        System.out.println("sending email with attachment");
                        sendEmail();
              // Create the button
              JButton button = new JButton(action);
              // Add the component to the frame's content pane;
              // by default, the content pane has a border layout
              frame.getContentPane().add(comp, BorderLayout.SOUTH);
              frame.getContentPane().add(button, BorderLayout.NORTH);
              // Show the frame
              int width = 300;
              int height = 300;
              frame.setSize(width, height);
              frame.setVisible(true);
         protected static void sendEmail() {
              String from = "me@localhost";
              String to = "me@localhost";
              String subject = "Important Message";
              String bodyText = "This is a important message with attachment";
              String filename = "c:\\tmp\\message.pdf";
              Properties properties = new Properties();
              properties.put("mail.stmp.host", "localhost");
              properties.put("mail.smtp.port", "25");
              Session session = Session.getDefaultInstance(properties, null);
              try {
                   MimeMessage message = new MimeMessage(session);
                   message.setFrom(new InternetAddress(from));
                   message.setRecipient(Message.RecipientType.TO, new InternetAddress(
                             to));
                   message.setSubject(subject);
                   message.setSentDate(new Date());
                   // Set the email message text.
                   MimeBodyPart messagePart = new MimeBodyPart();
                   messagePart.setText(bodyText);
                   // Set the email attachment file
                   MimeBodyPart attachmentPart = new MimeBodyPart();
                   FileDataSource fileDataSource = new FileDataSource(filename) {
                        @Override
                        public String getContentType() {
                             return "application/octet-stream";
                   attachmentPart.setDataHandler(new DataHandler(fileDataSource));
                   attachmentPart.setFileName(filename);
                   Multipart multipart = new MimeMultipart();
                   multipart.addBodyPart(messagePart);
                   multipart.addBodyPart(attachmentPart);
                   message.setContent(multipart);
                   Transport.send(message);
              } catch (MessagingException e) {
                   e.printStackTrace();
    }The sample above is not ideal so you need to go through it and start to ask me some questions if you have
    Let me know if you miss something
    Regards,
    Alan Mehio
    London,UK

  • How to send a delayed notification email?

    How to send a delayed notification email?
    I have a requirement to send an email to the service requestor 2 days after the main fulfillment task is completed.  I know I can create a task that auto-completes using the Dummy adapter, but is there a way to make it auto complete after a certain amount of time has elapsed?  I was thinking about creating a second fulfillment task that would send this email upon completion, but I can't figure out how to delay its start or its end. 

    Hi Tylor,
    James is onto a potential approach here. However, the only way I know of that could work is to use the Scheduled Start feature. This would require that you compute/project the start date of the auto-complete task before the delivery moment begins.
    You would need to do a date calculation and then store the projected date in a hidden field. You could then have your auto-complete task fire on that computed date, using the Scheduled Start feature.
    The wrinkle here, of course, is t

  • How to send e-mail notification automatically when a record is inserted?

    Dear All,
    Could anyone kindly tell me how to send e-mail notification automatically when a record is inserted through a form in Oracle Portal Release 2?
    Regards,
    Ridwan.

    Hi,
    If you are writing a form on a table then you can call the mail API from a database trigger on the table. If it is a form on a procedure, you can make the email call from the procedure. To know more about sending mails from plsql go to
    http://www.quest-pipelines.com/newsletter-v2/smtp.htm
    Thanks,
    Sharmila

  • Anyone know how to send automatic email notification in OA?

    Any where I can find a resource about how to send automatic email notification?
    say, samples, reference?
    please advice, thank you very much

    integrate your application with oracle workflow and send a notification from the mailer.
    details of working with workflow is there in the dev guide
    Thanks
    Tapash

  • How to send a modulate signal by the NI PXI-5441?

    How to send a modulate signal by the NI PXI-5441?
    I am using NI PXI-8108 / PXI-5441.
    I want to send a binary signal modulated (FSK) by the 5441. I tried to use, without success, the modulation VIs with the Fgen VI.
    Thanks

    Hi Mauro,
    the code structure is similar to any structure of I/O. You need open the communication channel with the hardware (using VI Open), use VI Write/Read to send/receive data and close the reference (VI Close). You can look the structure in LV examples.
    Nevertheless, if you cannot, post your code that I analize to you.
    Regards,
    Ricardo Ramos
    Engenheiro de Vendas - Sul
    National Instruments Brasil

  • How to send location based push notification

    How to send notification from website to the devices in   particular latitude and longitude

    I assume you mean you want the backend to send push notifications to a group of devices based on their geographical location?
    In that case each device needs to register at startup with the notification service (Windows, Apple, Android, etc.), and get a handle, then register the information (along with its unique identification, such as account or phone number) with
    Azure's notification hub. It also has to send its geographical location and the backend needs to keep this information somewhere (in a table, for example). The device needs to periodically update the backend for its new location. When the backend has the need
    to send push notifications based on device's geographical location (based on a rectangular grid for example), then it has all the information to do it.
    Frank

  • How to create event based process chains

    Hi All,
    I would like to know about event based process chains. In connection to this, could you please answer the following queries,
    1. How to create events
    2. How to link created event to the process chain in the same BI or BW system and as well as from  
        externel BI system.
    3. How link one process chain with other process chain (i.e, After completion of one process chain, it
        should trigger other dependent process chain)
    Thanks and Regards,
    Kotesh.

    1). Doubt regarding first question.
    For example, i would like to create time based event (it should be trigger daily at specified time),
    where we have to maintain scheduling options while creating event.
    When i checked SM62 there i found only two options a). Event name and b). Description.
    Could please send any doucument link if you have.
    Ans : You can use function modules like "BP_EVENT_RAISE" in a program and schedule the program to trigger.
    2). For externel BIW system also same procedure we need to follow or any difference.
    Ans : Externally you need to trigger the same event.
    3). i found dependent process chain also had scheduling options as direct scheduling insted of start using meta chain or API. As you said dependent process chain should be mata chain. it seems dependent process chain may be Meta chain or Direct scheduilg.
    Ans : Its your choice how you want to schedule it.You can either make that dependent chain a metachain or schedule it separately.
    I found at the end of first process chain they kept one process like Raise event and second process chain connected with the help of raise event process event name. If you have any idea about this process could explain a bit more.
    Ans : May be they are raising the event in the main chain and triggering the dependent chain using this event.
    But Metachain is preferred for such thing.Though it does similar thing.
    Hope this helps.

  • How to send E-Mail Notification executing through workflow?

    hi All
    I want to send E-Mail Notification executing through workflow in MDM Data Manager?
    I have tried it, But still i am unable to send E-Mail Notification?
    i will explain, how i have tried?
    1) I have created the simple workflow with the following components
        they are in sequence
          start--> process-> notify--->stop
    2)  owner of the workflow is Admin and launcher of the workflow is Admin and i have given email id to the Default Admin user in the console.
    3) i have created another user (i.e. User2) with default roles as like as Admin and i have assigned User2 to the process component in workflow and I have created e-mail address for the User2 in the console.
    4) i have created another user(i.e.User1) with default roles as like as Admin. and give e-mail address,under the notify component User1 is selected in To Field.
    5) stop component as usual
    coming to configuration part about the SMPT server in MDS.ini file
    1) in mds.ini file for the MailServer=, I have given SMTP Server name once and restarted the server and executed the workflow, but not worked
    2)in mds.ini file for the MailServer=, i have given SMTP Server IP Address and checked the port,and we have configured the host file also and restarted the server and executed the worflow , but not worked
    In all the ways i have executed and tried to send E-Mail Notifications through workflow, But I didn't
    can any one help where i have went wrong, so i can rectify  it
    what actually we have to give in mds.ini file? is any other cofiguration required for it?
    if any one have any solution for it , can you please explain me in step by step
    Thanks in Advance
    bharat.chinthapatla

    Hi Bharat,
    your steps seems to be correct. Just try to ping your mail server, to verify if your mail server is running up, besides note that mdm go throw port 25 for sending emails, so please check if you are able to send emails using port 25 in your network.
    Regards,
    Vito

  • How to send a push notification in smp

    Hi All,
        I am doing a sample with Push notification in SMP2.3, when i insert a record in database then it has to send a notification. form the work space when i send a notification it is coming.
    Now i want the notification when i insert a record then the server has to send the notification.
    Is it possible to do in SMP in Hybrid Application.
    Thanks & Regards,
    Vamsi.K

    Hi Jitendra Kansal,
    My Requirement is similar to this Push Notifications and end users.
    Here i am using SQL Server as Back-end and in the DCN i don't know where to pass "to" values, i want to send Push Notification on Hybrid web Container in Android device .
    please guide me how to pass the values ..
    Thanks,
    Vamsi K.

  • How to send a group notification in approval process?

    I'd like to send a group notification in approval process, so as to tell them that they hava pending tasks in OIM.
    As if the out of the box does not support sending an email to a group of users. I have written the custom code
    to implement it, but I don't know where should I attach the adapter/event handler in the approval process.
    Any suggestions will be helpful! Thanks!

    Hi,
    I you can attach the adapter to to approval task as you attach adapter to other process task.If you are writing task assignment adapter then you can also attach this adapter in assignment tab.
    Regards
    Nitesh

  • How to send a mail prior to the due date

    Hi all,
                 I would like to send a mail prior to the due date. Please let me know how to go to the previous step after the loop is executed once in workflows.
    Thanks,
    Sirisha N.

    Hi all,
                 I would like to send a mail prior to the due date. Please let me know how to go to the previous step after the loop is executed once in workflows.
    Thanks,
    Sirisha N.

  • How to send html email notification in bpel

    hi gurus,
    i want to send html email notification from bpel.
    before, i already successful send html email with attachment, but when i send an email without attachment, then the body message will turn into a plain text.
    as i check from the email accepted, email with attachment will have a mime type "text/html" but if no attachment then it will be "text/plain"
    from the bpel configuration, by default the mime type already set to "text/html; charset=UTF-8", below is the sample configuration in my bpel process
    [quote]
    <copy>
                                    <from>string('text/html; charset=UTF-8')</from>
                                    <to variable="varNotificationReq"
                                        part="EmailPayload">
                                        <query>ns10:Content/ns10:MimeType</query>
                                    </to>
                                </copy>
    [/quote]
    i think this suppose to be a easy configuration, but i'm not sure whether i miss something in configuration the email process or this is a bugs in bpel.
    environment:
    linux
    jdev 11.1.1.6
    do u guys ever facing a same problem or have a solution to this ? please throw some light.
    thanks
    ===
    update, i found a temporary solutions.
    so i add a attachment from the process design, and then i change it from the source.
    [quote]
    <copy>
                                    <from>
                                        <literal>
                                            <Content xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService">
                                                <MimeType xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService">multipart/alternative</MimeType>
                                                <ContentBody xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService">
                                                    <MultiPart xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService">
                                                        <BodyPart xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService">
                                                            <MimeType xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService"/>
                                                            <ContentBody xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService"/>
                                                            <BodyPartName xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService"/>
                                                        </BodyPart>                                            
                                                    </MultiPart>
                                                </ContentBody>
                                            </Content>
                                        </literal>
                                    </from>
                                    <to variable="varNotificationReq"
                                        part="EmailPayload">
                                        <query>ns10:Content</query>
                                    </to>
                                </copy>
    <copy>
                                    <from>string('text/html; charset=UTF-8')</from>
                                    <to variable="varNotificationReq"
                                        part="EmailPayload">
                                        <query>ns10:Content/ns10:ContentBody/ns10:MultiPart/ns10:BodyPart[1]/ns10:MimeType</query>
                                    </to>
                                </copy>
                                <copy>
                                    <from>string('your message')</from>
                                    <to variable="varNotificationReq"
                                        part="EmailPayload">
                                        <query>ns10:Content/ns10:ContentBody/ns10:MultiPart/ns10:BodyPart[1]/ns10:ContentBody</query>
                                    </to>
                                </copy>
    [/quote]
    make sure you put the mime type multipart/alternative into the email payload content. by default, when you add attachment, it will generate mime type multipart mixed automatically.
    if you don't change it to multipart/alternative, your email will show a attachment, but actually your email doesn't contain any attachment.
    and then for the message and mimetype make sure you have that ns10:bodypart, because this email already been set as a multipart email.
    when you add attachment, by default it will generate 2 body part, first one is for the body message and the second one is for the attachment. since i only want to use the body message only, then i have to erase the second bodypart
    with this workaround, i can send a html email without attachment perfectly.
    but i have to take note, when i updating the email process from process design, then the source will be generated again automatically, and the edited one will be replaced.
    thanks.

    Make sure you upload all of the images used in your email to a server you control. Then, change your image paths to point to those uploaded images with absolute links.
    You will get marked as spam if you attempt to send images as attachments to a large list of recipients and most email clients won't download images to begin with, so make sure your html email makes sense with broken pictures.
    CSS support is spotty across email clients, if you use css, make sure it's inline, not embedded in the <head> or externally linked in the <head>. Some email clients strip out the <head> section entirely.
    Basically, you need to design your html email as if you haven't moved out of the 90's yet, as far as web design is concerned, in order to get maximum cross client compatibility.
    Then, when you're ready, I would suggest using a service like www.icontact.com or www.constantcontact.com if your subscriber list is anywhere over 100 or so recipients.

Maybe you are looking for