How to send the image bytes(which is taken from webcam) from flex(4.6 version) to dotnet

In my project we are using adobe flash builder 4.6 as a client-side scripting,visual studio as a mediator(for connecting the oracle database).In this, in flex 4.6 we are capturing images from webcam that's working fine, after capturing the image we need to save this captured image in oracle database so in order to save we need to pass this image from flex to dot-net(visual studio) so i need a help on how to approach to done this(passing the image from flex to dot-net) if any one knows please help me i will be very thankful to them

finally i got the solution fot this,i tried using yhis link it work's for me
http://stackoverflow.com/questions/5702239/how-to-pass-image-from-a-flex-application-to-a- asp-net-c-sharp-web-service

Similar Messages

How to send the pdf file....

How to send the pdf file which is an outpu of smart form to sap users.
How to delete the pdf file as soon as it was sent.

Have you checked Forums » Community Discussions » Code Snippets
I believe there were some examples on converting/sending PDF.
Or check FM 'SO_DOCUMENT_SEND_API1' and documentation for it.

How to display the image which in KM folder using url iview

Hi Friends
How to display the image, which is under KM folder structur using the url iview.
i trying using url iview url as \document\testfolder\abc.jpg as url for the iview.
but its now working .. so please help me how to slove this problem
If is not the correct way then please suggest me best way to achive this.
Thanks
Mukesh

Hi Mukesh,
I think this may work,
1, Create a HTML Layout.
    You can put your image wherever u want with HTML Codes.
    Check this, [Article|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3915a890-0201-0010-4981-ad7b18146f81] & [Help|http://help.sap.com/saphelp_nw04/helpdata/en/cc/00c93e9b2c3d67e10000000a114084/frameset.htm]
    With this, u can use the standard KM commands also.
2, U need to use KM Navigation iView for this rather than KM Doc iView.
3, In the Nav iView, u can use &rndLayoutSet=nameOfUrHTMLLayout to force the view with this new layout.
Regards
BP

Hi does anybody know how to perform roundtripping between aperture 3 and lightroom 3? i can set up aperture to send the file to lightroom BUT i cannot get lightroom to send it back with the just the adjustment (it sends the image as a separate file)

basically, i find the sharpening tool in aperture extreamly slow and would like to use lightroom, just for sharpening. I then would like to send the image back to aperture as just an adjustment on the original file and not a whole new replica file as the original. can any body give a easy solution? cheers

What you want to do can't be done. There is no low-friction way to combine image adjustments from Aperture and Lightroom. There is no way at all to combine them without creating new files.
This was recently discussed in this thread.
Are you using the Edge Sharpening adjustment? In Aperture 3, it superceded the old Sharpening adjustment, which remains included for backwards compatibility.

How to receive the images / binary data t ype

How to receive the images / binary data type in webdynpro....
i have a website that let's the user send email, the email attachment and message are stored in both in images data type....
q1) can i stored the message into binary data type...but the message is very long.....
q2) if i have a textbox ...i surely will need to display the message in string ,right ?
[......... msg here ........]
what is the codes to receive the images / binary data type in webdynpro....

As in your previous post if you are storing them as BLOB object.. am sure you are able to get a byte stream or byte array(bytes[]) out of it.
There should be some way to identify if its a image or a message BLOB. If its a image , convert into bytes and use
WDWebResource.getWebResource(bytes,resource type).getAbsoluteURL()
to obtain the url.. assign this image UI element..
In case its the message , use bytes.toString to get the message ..
Regards
Bharathwaj

How to send array of bytes to a servlet and store it in a file

Hi,
How to send array of bytes to a servlet and store it in a file.
I am new to Servlets. if possible for any one, please provide the code.
Thanks,
cmbl

Through HTTP this is only possible with a POST request of which the encoding type is set to multipart/form-data. You can use Apache Commons FileUpload to parse such a multipart form data request into useable elements. From the other side (the client) you can use a HTML <input type="file"> element or a Java class with Apache Commons PostMethod API.
You may find this article useful: http://balusc.blogspot.com/2007/11/multipartfilter.html

How to send the spool output to the specific user during ALE distribution

Hi All
In ALE internal order Configuration done by BAPI Method SAVEREPLICA Business object BUS2075whenever user changed the internal order which is moved to the destination system because of change data setting in data element fields.
I want to know how to send the spool output of the changed internal order to the specific user during ALE distribution.
Please help me to reslove the above issue
Thanks & Regards
KRISHGUNA

Solved by myself

How to send the data from mac pc to External drive

how to send the data from mac pc to External HDD
or Pen Drive but with out deleting the preview as data

You can use "Finder", which is in your dock, to copy files from your iMac folders over to the external hard drive.
Hope this helps

How to send the payload to a jsp using receiver Http adapter?

Hi experts,
I have this scenario from Legacy to XI to external app server.I have a test jsp to execute that functionality .Its a jsp which has 1 textarea named "test" and when I click on the submit buton I get a response back.This way I am able to test this independently.Now from XI when I am executing my scenario I am getting status code '1250' and message as ' http request(test) is null'.Now in the scenario in http adapter I just provide the target host : ip of server ,
service number : port no ,
path: the container or the request handler. But this scenario fails and gives me the above erroneous response.Now Basically I am not able to get how to send the value to the textarea "test"? please provide help as soon as possible.Do we have to put the name of the jsp in the "path" in http adapter and use prolog as test=.I tried this but it doesnt work.
Is there any way to check the URL that it forms after appending the querystring in the url ...?
So please provide help on this or suggest a solution to [email protected] as soon as possible.....
Thanx in advance.
Akshata

hey Shekhar,
thanx for that prompt reply but I have configured the communication channel in the same manner as suggested by u.
actually I have this jsp page http://xx.xx.xx.xx:8080/abcdef/try/efg.jsp where there is a textarea "test" which has to be filled and there is a submit button.When I test this http client i.e the above jsp page independently then it goes to handler
http://xx.xx.xx.xx:8080/abcdef/trial/ And it gives a proper response message after clicking on the submit button.
now I want to carry out the same using receiver http adapter. I need to pass the value for this inputfield names "test" on that jsp . so right now I have configyured the adapter as
addressing type: url
target host : xx.xx.xx.xx
service no:8080
path : here I have given the path of handler i.e /abcdef/trial I tried giving the jsp page also but logically I guess it should be the handler.
content type: text/xml; charset=iso-8859-1
xml code: UTF-8
Mask special characters (URL escaping) checked.
now since the name of the inputfield is "test" in the prolog I gave test=
But it doesnt work I get this error "http request parameter [test] is null" in the response message which I guess suggests that it is not able to send the value for the field"test" to that handler.Please suggest how to send this and tell me if there are any other configurations that I have to do in the receiver communication channel.
Thanx ,
Akshata

How to change the images dynamically in a table.

Hai,
How to change the images dynamically in a table based on the condition in webdynpro abap.
Edited by: Ravi.Seela on Oct 13, 2011 2:17 PM

This has been much discussed earlier. Do search posts.
For your scenario i would do the following.
inside your node which is binded to the table, i create a new node image with cardinality 1 ..1 and a attribute called path of type string.
create a supply function for the node image .
Supply method now has a Element (Parent element ) and node.
Based on your record in element, set the right image source to path attribute and bind the node.
This will make sure that the framework calls the image supply function for every row in a table.

How to upload the image and diplay the image in the browser using jsp

How to upload the image and diplay the image in the browser using jsp
thanks
shan

i'll suggest looking for sample code or tutorial with a relevant query in google, which as far more time than us to answer this type of reccurent question

In Applet how to send an ' image' and 'string' as parameter

Hi,
In web application, how to use post method in applet to send an ' image' and 'string' as a parameter, I can able to send the image alone form applet to servlet.

869665 wrote:
Hi,
In web application, how to use post method in applet to send an ' image' and 'string' as a parameter, I can able to send the image alone form applet to servlet.One way to do this is to convert your binary image data to base64 (convert it to plain text) and send it along with your other String parameter, delimited with a & of course.
Edited by: maheshguruswamy on Aug 2, 2011 11:59 AM

How to send the data manually

Hi Experts,
I need small information.when messages are gone into queue state due to one message
When an EDI file came into wrong format and with that some messages are gone into queue state in MONI.
if i cancel the first message then remaining all the messages are processing successfully.
So from that cancel message i want sent the data manually as business needs that data.
Can all please tell me how to send the data manually with steps.
Thanks in Advance.
Bhaskar

Hi,
I think you are talking about QoS "EOIO", in which all messages are porcessed in FIFO order and whenever the preceeding message get stuck due to error in the queue, then all the messages are stoped. And yes as soon as you will cancel the message which went into error all the remaining messages will automatically will be delivered.
In my opinion since QoS is EOIO then it will be not possible to sent the data mannually, you can do one thing, do not cancel the message. Try to correct the messge and then resend it.
Regards,
Sarvesh

How to save the image in the form?

As thread, how to save the image into a file from the pdf form - image box?
I have Adobe Acrobat 9 Pro extended.

Hi Sandy,
Sorry for Delay.Could you please provide script code for the Button and in which event we want to add the code
I want to Save the lot of images in the PDF. For that I kept Image field in the form.Here I am able to upload the images but those are not saved.
If possible please share the details document.
Please help me.
Thanks,
Ravi.

How to send the email to different email addresses from Workflow

Hello,
i an not getting that how to send the email from Workflow in SAP.
plz give the steps to do that.
i have done lots of time but system is not sending the email to different email address.

Hi,
lot of configuration is invloved in sending
mail to external email id. check BASIS to
configure for external mails ans also check
debug FM and see which conditions exceptions
(Document not sendis raised)
also check below code
CLEAR: DOC_CHNG, OBJTXT, OBJBIN, OBJPACK, OBJHEAD, RECLIST,
RECIPIENT_INT, DOC_SIZE,TAB_LINES.
REFRESH: OBJTXT, OBJBIN, OBJPACK, OBJHEAD, RECLIST.
OBJBIN[] = CONTENT_OUT[].
Populate e-mail title
DOC_CHNG-OBJ_NAME = 'MAIL'.
CONCATENATE 'EETS for Contract #'(245)
OIA01_TAB-EXGNUM
INTO DOC_CHNG-OBJ_DESCR SEPARATED BY SPACE.
DESCRIBE TABLE OBJTXT LINES TAB_LINES.
READ TABLE OBJTXT INDEX TAB_LINES.
DOC_CHNG-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( OBJTXT ).
It is a text document
CLEAR OBJPACK-TRANSF_BIN.
The document needs no header (head_num = 0)
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 0.
but it has a body
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
of type RAW
OBJPACK-DOC_TYPE = 'RAW'.
APPEND OBJPACK.
Create the attachment (the list itself)
DESCRIBE TABLE OBJBIN LINES TAB_LINES.
It is binary document
OBJPACK-TRANSF_BIN = 'X'.
we need no header
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 0.
but a body
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
of type PDF
OBJPACK-DOC_TYPE = 'PDF'.
OBJPACK-OBJ_NAME = 'Attachment'(239).
CONCATENATE 'EETS_' OIA01_TAB-EXGNUM '_'
IT_ZMMTACCUID-ACCTUSRID
'_' SY-DATUM '_' SY-UZEIT '.PDF'
INTO OBJPACK-OBJ_DESCR.
READ TABLE OBJBIN INDEX TAB_LINES.
DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( OBJBIN ).
OBJPACK-DOC_SIZE = DOC_SIZE.
APPEND OBJPACK.
Get e-mail address
CLEAR IT_ADDRESS.
READ TABLE IT_ADDRESS WITH KEY ACCTID = IT_ZMMTACCUID-ACCTUSRID
BINARY SEARCH.
IF SY-SUBRC = 0.
RECIPIENT_INT-ADDRESS = IT_ADDRESS-SMTP_ADR.
ENDIF.
*Send email to external mail address
RECLIST-RECEIVER = RECIPIENT_INT.
RECLIST-REC_TYPE = 'U'.
APPEND RECLIST.
CLEAR RECLIST.
*Send email to SAP Office mail address
RECLIST-RECEIVER = IT_ZMMTACCUID-ACCTUSRID.
RECLIST-REC_TYPE = 'B'.
APPEND RECLIST.
CLEAR RECLIST.
SEND THE DOCUMENT BY CALLING THE SAPOFFICE API1 MODULE
FOR SENDING DOCUMENTS WITH ATTACHMENTS
call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
exporting
document_data = doc_chng
put_in_outbox = 'X'
importing
sent_to_all = sent_to_all
tables
packing_list = objpack
object_header = objhead
contents_bin = objbin
contents_txt = objtxt
receivers = reclist
exceptions
too_many_receivers = 1
document_not_sent = 2
operation_no_authorization = 4
others = 99.
also check
https:/Re: mail sending problem
Regards
amole

How to send the image bytes(which is taken from webcam) from flex(4.6 version) to dotnet

Similar Messages

Maybe you are looking for