How to send the PAYE EDI files - P45(1) P45(3) P46 to HMRC
Hi,
How do we send the EDI files like P45(1), P45(3), P46 etc.. to HMRC.
Oracle Payroll generates the files, but doesn't support transmission to HMRC.
Can these files be directly uploaded on the HMRC website ?
Are there any recommended third-party softwares for the same ?
Appreciate any inputs.
Thanks,
Vigneswar
Thanks Avinash.
I see some Third-party softwares here :
http://www.hmrc.gov.uk/ebu/edi/edi-software.htm#P37_1596
Are there any free ones ?
Any idea how much does the licensing for EigarPay cost ?
Thanks,
Vigneswar
Similar Messages
-
How to send the entire binary file as Content in mail adapter
Hi,
I have the below scenario:
A binary file is there on the XI server and this is more than 1 lines.
This file needs to be sent across to certain email addresses via the XI interface.
I have made the design and config and now get the the mail but so far not been able to get the file contents.
The requiremnet is to send the entire file contents in the mail so that they appear in the body of the received mail.
How do i do it?
Can you please advice.
Regards,
ArchanaHi,
I am giving below the incoming mesasge details and the outgoing Mail message details.
Sender File Adapter:
Mesasge Content/Payload:
<?xml version="1.0" encoding="utf-8" ?>
- <ns:MT_Ack_Mail_In xmlns:ns="Urn:Serco-com:interface:Banking:HSBC:FileTransfer">
- <Content>
- <Mail>
<Details>UNBUNOA:3HEXAGON-ABCABC10268002081201:2152+692125127893</Details>
</Mail>
- <Mail>
<Details>UNH1CONTRL:2:2:UN:APACS</Details>
</Mail>
- <Mail>
<Details>UCI1000246720ABC10268002HEXAGON-ABC4+C09</Details>
</Mail>
- <Mail>
<Details>UNT31</Details>
</Mail>
- <Mail>
<Details>UNZ1692125127893</Details>
</Mail>
</Content>
</ns:MT_Ack_Mail_In>
Receiver Mail Adapter:
Message Content/Payload:
<?xml version="1.0" encoding="UTF-8" ?>
- <ns1:Mail xmlns:ns1="http://sap.com/xi/XI/Mail/30">
<Subject>ME-Acknowledgement</Subject>
<From>email of from</From>
<To>my email</To>
</ns1:Mail>
I need to map the contents of the incoming payload Contents/Mail/Details (all the 5 instance) to outgoing Missing Content (after To field).
If it can be in Mail body, then it would be best else please suggest what other option can I use?
Also, If i want the file name to be in the subject of the mail, is that possible to be picked up in the configuration?
Please help.
Regards,
Archana -
How to send the Checked-in file to the user in workflow as an attachment.
Hi All ,
I am using UCM 11g and i need to send email to the workflow users with the checked-in file as an attachment.Can anyone guide me how to customize or configure it in UCM 11g.
Thanks !!!Hello,
this is not a standard behaviour and I am not sure if I would even recommend you to go this way. Why?
a) content items in workflows are usually still to be reviewed - if you send it as an attachment to an email, the user may forward it and you will by-pass all the security that UCM provides
b) you will mess up version controls (which attachment is the correct one, if someone checks in a new version?)
c) you will pass the content through the email server - this is something customers usually want to get rid of
d) why can't you use just the standard workflow review functionality? - that is, instead of the file you send a link to the file, which usually displays its web-viewable rendition (but you can change it to the link to native files, if you want to) This is also a one-click solution (well, users may have to authenticate for UCM, if you have no single sign-on), and it is completely under control.
However, if you stick to email attachments, you will have to go with a custom component. There is a sample AcmeEmail, which can serve as a basis for email functions, so you will need to combine it with workflows. But like I wrote - better try to persuade your customer to go with the standard.
Jiri -
How to create xml file from Oracle and sending the same xml file to an url
How to create xml file from Oracle and sending the same xml file to an url
SQL/XML (XMLElement, XMLForest, XMLAgg, etc) and UTL_HTTP.
Whether that works for you with the version of Oracle you have, your requirements, and needs is another story. A little detail goes a long way. -
How to send the dynamically generated XML file to other site for further processing?
I have a question regarding exchanging data between two systems
using XSQL servlet. The situation is descrbed as the follows:
Assume that we have a simple XSQL page named "emp.xsql"
<?xml version="1.0"?>
<?-- XSQL page file "emp.xsql" -->
<xsql:query xmlns:xsql="urn:oracle-xsql" connection="demo" >
SELECT * FROM EMP
</xsql:query>
and we can access it through the HTTP request likes
http://web_server_name/xsql/emp.xsql.
Usually we will the returned dynamic XML file and show it on the
screen. Now the problem is that we don't want to show the
generated XML file on the calling screen. Instead, we want to
send the generated XML file to other website for further
processing, say, using JSP or ASP likes
http://other_web_server_name/XMLProcessing.jsp?.....
How can it be implemented using XSQL servlet?
Any hint and outline of the solution is appreciated.
ThanksIke,
Do you have a sample. I am searched so much in this forum for samples. I looked on SAX Parser. I did not find any samples.
Please help me.
Thank you for your posting.
Padma. -
How to send the report output to the application server in a excel file
Hello,
how to send the report output to the application server in a excel file.
and the report runs in background.
Thanks in advance.
SundeepDear Sundeep.
I'm providing you with the following piece of code ... Its working fine for me ... hopefully it suits your requirement ...
D A T A D E C L A R A T I O N *
TYPES: BEGIN OF TY_EXCEL,
CELL_01(80) TYPE C,
CELL_02(80) TYPE C,
CELL_03(80) TYPE C,
CELL_04(80) TYPE C,
CELL_05(80) TYPE C,
CELL_06(80) TYPE C,
CELL_07(80) TYPE C,
CELL_08(80) TYPE C,
CELL_09(80) TYPE C,
CELL_10(80) TYPE C,
END OF TY_EXCEL.
DATA: IT_EXCEL TYPE STANDARD TABLE OF TY_EXCEL,
WA_EXCEL TYPE TY_EXCEL..
E V E N T : S T A R T - O F - S E L E C T I O N *
START-OF-SELECTION.
Here you populate the Internal Table.
Display - Top of the Page.
PERFORM DISPLAY_TOP_OF_PAGE.
E V E N T : E N D - O F - S E L E C T I O N *
END-OF-SELECTION.
SET PF-STATUS 'GUI_STATUS'.
E V E N T : A T U S E R - C O M M AN D *
AT USER-COMMAND.
CASE SY-UCOMM.
WHEN 'EXPORT'.
Exporting the report data to Excel.
PERFORM EXPORT_TO_EXCEL.
ENDCASE.
*& Form DISPLAY_TOP_OF_PAGE
text
--> p1 text
<-- p2 text
FORM DISPLAY_TOP_OF_PAGE .
SKIP.
WRITE: /05(128) SY-ULINE,
/05 SY-VLINE,
06(127) 'O R I C A'
CENTERED COLOR 1,
132 SY-VLINE.
WRITE: /05(128) SY-ULINE,
/05 SY-VLINE,
06(127) 'Shift Asset Depreciation - Period/Year-wise Report.'
CENTERED COLOR 4 INTENSIFIED OFF,
132 SY-VLINE.
WRITE: /05(128) SY-ULINE.
E X C E L O P E R A T I O N
CLEAR: IT_EXCEL[],
WA_EXCEL.
PERFORM APPEND_BLANK_LINE USING 1.
WA_EXCEL-cell_02 = ' XYZ Ltd. '.
APPEND WA_EXCEL TO IT_EXCEL.
CLEAR: WA_EXCEL.
WA_EXCEL-cell_02 = 'Shift Asset Depreciation - Period/Year-wise Report.'.
APPEND WA_EXCEL TO IT_EXCEL.
PERFORM APPEND_BLANK_LINE USING 1.
ENDFORM. " DISPLAY_TOP_OF_PAGE
*& Form APPEND_BLANK_LINE
text
-->P_1 text
FORM APPEND_BLANK_LINE USING P_LINE TYPE I.
DO P_LINE TIMES.
CLEAR: WA_EXCEL.
APPEND WA_EXCEL TO IT_EXCEL.
enddo.
ENDFORM.
*& Form EXPORT_TO_EXCEL
text
--> p1 text
<-- p2 text
FORM EXPORT_TO_EXCEL .
DATA: L_FILE_NAME(60) TYPE C.
Create a file name
CONCATENATE 'C:\' 'Shift_Depn_' SY-DATUM6(2) '.' SY-DATUM4(2)
'.' SY-DATUM+0(4) INTO L_FILE_NAME.
Pass the internal table (it_excel which is already populated )
to the function module for excel download.
CALL FUNCTION 'WS_EXCEL'
exporting
filename = L_FILE_NAME
tables
data = IT_EXCEL
exceptions
unknown_error = 1
others = 2.
if sy-subrc <> 0.
message e001(ymm) with 'Error in exporting to Excel.'.
endif.
ENDFORM. " EXPORT_TO_EXCEL
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
When you click the button - Export to Excel ( GUI-Status) you'll be able to export the content of the Internal Table to an Excel file .......
Regards,
Abir
Don't forget to award Points * -
How to send the PDF file to FAX will the nast table updates
Hi all,
How to send the PDF file to FAX. Will the nast table updates ( which fields updates ).
Need is once fax is send for that delivery, again it should not fax again. Will the nast table helps to check the sent fax.
Please give me sutable suggessions....Have you checked Forums » Community Discussions » Code Snippets
I believe there were some examples on converting/sending PDF.
Or check FM 'SO_DOCUMENT_SEND_API1' and documentation for it. -
How to send the pdf file....
How to send the pdf file which is an outpu of smart form to sap users.
How to delete the pdf file as soon as it was sent.Have you checked Forums » Community Discussions » Code Snippets
I believe there were some examples on converting/sending PDF.
Or check FM 'SO_DOCUMENT_SEND_API1' and documentation for it. -
How to send the file contents in the application server to ftp server
Hi,
how to send the file contents in the application server to ftp server.
regards,
sreeTest SAP FTP functions
DATA: BEGIN OF MTAB_DATA OCCURS 0,
LINE(132) TYPE C,
END OF MTAB_DATA.
DATA: MC_PASSWORD(20) TYPE C,
MI_KEY TYPE I VALUE 26101957,
MI_PWD_LEN TYPE I,
MI_HANDLE TYPE I.
START-OF-SELECTION.
MC_PASSWORD = 'password'.
DESCRIBE FIELD MC_PASSWORD LENGTH MI_PWD_LEN.
*-- FTP_CONNECT requires an encrypted password to work
CALL 'AB_RFC_X_SCRAMBLE_STRING'
ID 'SOURCE' FIELD MC_PASSWORD ID 'KEY' FIELD MI_KEY
ID 'SCR' FIELD 'X' ID 'DESTINATION' FIELD MC_PASSWORD
ID 'DSTLEN' FIELD MI_PWD_LEN.
CALL FUNCTION 'FTP_CONNECT'
EXPORTING
USER = 'userid'
PASSWORD = MC_PASSWORD
HOST = 'servername'
RFC_DESTINATION = 'SAPFTP'
IMPORTING
HANDLE = MI_HANDLE
EXCEPTIONS
NOT_CONNECTED = 1
OTHERS = 2.
CHECK SY-SUBRC = 0.
CALL FUNCTION 'FTP_COMMAND'
EXPORTING
HANDLE = MI_HANDLE
COMMAND = 'dir'
TABLES
DATA = MTAB_DATA
EXCEPTIONS
TCPIP_ERROR = 1
COMMAND_ERROR = 2
DATA_ERROR = 3
OTHERS = 4.
IF SY-SUBRC = 0.
LOOP AT MTAB_DATA.
WRITE: / MTAB_DATA.
ENDLOOP.
ELSE.
do some error checking.
ENDIF.
CALL FUNCTION 'FTP_DISCONNECT'
EXPORTING
HANDLE = MI_HANDLE
EXCEPTIONS
OTHERS = 1.
Execute external commands (FTP Scripts)
The following code shows the syntax of the FM 'SXPG_COMMAND_EXECUTE'. You pass it the external command created within transaction SM69 and it will execute it.
DATA: ld_comline
LIKE sxpgcolist-name,
ld_param LIKE sxpgcolist-parameters,
ld_status LIKE extcmdexex-status,
ld_output LIKE btcxpm OCCURS 0 WITH HEADER LINE,
ld_subrc LIKE sy-subrc.
REFRESH ld_output.
MOVE 'FTP_DATA_IN' to ld_comline. "Maintained using trans SM69
Execute external command, contained in 'ld_comline'
CALL FUNCTION 'SXPG_COMMAND_EXECUTE'
EXPORTING
commandname = ld_comline
additional_parameters = ld_param "Params passed to script
operatingsystem
= 'UNIX'
IMPORTING
status = ld_status
TABLES
exec_protocol = ld_output
EXCEPTIONS
no_permission
= 1
command_not_found
= 2
parameters_too_long
= 3
security_risk
= 4
wrong_check_call_interface = 5
program_start_error = 6
program_termination_error = 7
x_error = 8
parameter_expected = 9
too_many_parameters = 10
illegal_command = 11
wrong_asynchronous_parameters = 12
cant_enq_tbtco_entry
= 13
jobcount_generation_error
= 14
OTHERS
= 15.
IF sy-subrc NE 0.
ENDIF. -
Hi Experts,
I need small information.when messages are gone into queue state due to one message
When an EDI file came into wrong format and with that some messages are gone into queue state in MONI.
if i cancel the first message then remaining all the messages are processing successfully.
So from that cancel message i want sent the data manually as business needs that data.
Can all please tell me how to send the data manually with steps.
Thanks in Advance.
BhaskarHi,
I think you are talking about QoS "EOIO", in which all messages are porcessed in FIFO order and whenever the preceeding message get stuck due to error in the queue, then all the messages are stoped. And yes as soon as you will cancel the message which went into error all the remaining messages will automatically will be delivered.
In my opinion since QoS is EOIO then it will be not possible to sent the data mannually, you can do one thing, do not cancel the message. Try to correct the messge and then resend it.
Regards,
Sarvesh -
How to send the data from mac pc to External drive
how to send the data from mac pc to External HDD
or Pen Drive but with out deleting the preview as dataYou can use "Finder", which is in your dock, to copy files from your iMac folders over to the external hard drive.
Hope this helps -
How to send the output to PDF format in reports 6i?
Hi,
How to send the output to PDF format in reports 6i? I given Mode = BITMAP.
DESTYPE = File, DESFORMAT = PDF, DESNAME = C:\x.pdf.
Report is running fine. But PDF file not generated. I don't know what i missed. Any one can help this?
Thanks
KavithaHello,
Do you get this problem only for DESFORMAT=PDF ?
Test with :
DESFORMAT = RTF, DESNAME = C:\x.rtf
or
DESFORMAT = HTMLCSS, DESNAME = C:\x.html
does it work ?
Check if DESNAME is modified in the reports itself.
Regards -
How to send the Adobe page as mail attachement from webdynpro...
Hi Experts,
How to send the Adobe page as external mail attachment from webdynpro automatically (for example: If I input the data for sales order in a view and created the sales order, if the sales order is created then have to place the created sales order number and the some details in a adobe form and should send as external mail and have to specifying the body as "Sales order created and details can be found in the attached adobe form" from webdynpro).
Do the needful.
Thanks & regards,
Ravi.Hi ravi,
See the WDA forum for the how to attach a file in webdynpro component for the attachments. -
How to send the email without using server side (Php, java)
How to send the (Run time image or file) Email & Attachment in Flex web application. without using php, java.
Well, at some point your email needs to be handed over to an SMTP server. It's a fair amount of work, but if you want to just send an email you could open a socket to a mail server's SMTP port and follow the SMTP protocols to send your email.
ActionScript sockets: http://help.adobe.com/en_US/ActionScript/3.0_ProgrammingAS3/WS5b3ccc516d4fbf351e63e3d118a9 b90204-7cf7.html
SMTP protocol: http://tools.ietf.org/html/rfc821
-- Tom -
How to read the entire CSV file content
Hi All,
I am using JDBC adapter and i need to send the entire CSV file to the Blob datatype filed.
How to achive this?
Thanks
Mahi.Hi Mahi
So you want to send the content of the entire CSV file to a particular field in data base?
You can write a java mapping to read the content of the CSV file and then populate the same under the field of the data base.
If you need help on java mapping then please provide the sample CSV file and the target JDBC structure.
Maybe you are looking for
-
IPod's stuck on stupid....
Alright then, Gotta problem with my iPod. First of all, it's a 30gb 5G. Now, here's the story: I downloaded some songs and wanted to put em on my iPod, after connecting the iPod I went downstairs for all of 20 minutes only to come back and see that i
-
Source determination,Quota Arrangement Process
Hi, Plz tell me how to maintain Source determination,Quota Arrangement.step by step
-
Dear Sap Gurus, when i am running the vf04 billing due list for eg till 31/3/08,in the document selection i am selecting intercompany billing. list of billing due list is displayed. i had selected one billing document and click individual billing do
-
I haven't had any problems with my phone charging. Now, all of a sudden today it says it doesn't recognize the charger and shows a red x in the battery. I turned it off to see if it would charge that way and nothing happened. The charger is the one
-
Can more than one e mail address be set on a contact in a group?
I would like to send e mails to groups of friends. However, since most have multiple e mails I need to be able to send the mail to all their e mails at once. Thus if they are not at work they still get the message at home. Can this be done?