How to send to Weblogic 9.1 JMS queue from EJB running in Glassfish?
Hi.
I hope this is the correct forum.
I need to send a message to a jms queue on a remote weblogic 9.1 server. To this end I believe I will have to:
1) Install one or more weblogic client libraries/jar files on my glassfish application server. The weblogic server expects communication in the "t3" protocol, which I believe tunnels iiop, jms etc. inside their own proprietary protocol
2) Define the jms queue in my glassfish application server with a queue connection factory that creates the queue using classes from the weblogic jars?
3) Otherwise code the EJB methods sending messages as I would code and send messages to any jms queue
It's the first two steps that have me baffled. The more I dig in glassfish administrator's manual, the more confused I become.
Anybody have any idea if/how this can be accomplished?
Some reference to where I may find information as to how to accomplish this?
Thank you,
Jacob.
Jacob,
I suggest you try, either a GlassFish forum (http://forums.java.net/jive/forum.jspa?forumID=56), or perhaps the GenericJMSRA project https://genericjmsra.dev.java.net .This forum is primarily about the Sun JMS provider, Java MQ or Open MQ -- or the JMS Specification.
-- Ed Bratt
Similar Messages
-
How to view messages in Jms queue from OEM 12c Cloud Control
Hi All,
How can I view messages in a Jms queue from OEM 12c Cloud Control without logging into WebLogic Administration Console?
Thanks in Advance!!EMCC 12c gets down to the JMS message queue/topic level in regards to the metrics being collected. It doesn't provide a view into the actual messages themselves. Are you trying to capture/track messages with a particular payload?
-
Migration of JMS Queues from Weblogic 10.3 to 12c
Hi - We are currently planning to move our JMS Queues from existing 10.3 server to 12c and for the same we are looking for some feedback :
We need to define a rollback strategy in case our migration to 12c does not work well and we need to revert back to using weblogic 10.3. Are messages sent to weblogic 12c backward compatible with version 10.3? As part of rollback, business would want to drain out any remaining messages from 12c and feed them back to 10.3 queues to allow them for processing. Is this feasible? If yes then, could you please suggest how, If not then could you please suggest a strategy for rollback and process remaining messages in 12c?
We would also want to know if we can keep the same Database for both 10.3 and 12c JMS persistent stores for the same queues or should we define a completely new DB? With weblogic we can define prefixes for the DB stores which would make queue tables to have different names between 10.3 and 12c for same queues. However we are not sure if there are any other internal tables that JMS creates in the persistent stores DB, not using these prefixes, which would then corrupt the data since both 10.3 and 12c tables would be on the same DB.
Thanks
NitinHello,
the final release for WLP is 10.3.6, running on WebLogic Server 10.3.6.
Emmanuel -
How to get an XMLBean off the jms queue
Hello all,
I think I can post an XMLBean to a JMS queue, but how to I read it off the JSM
queue from within a MDB?
When I cast the message from the onMessage(Message msg) event to my XMLBEan, I
get a class cast exception.
I want to post some form data to a MDB to kick off some processes.
Here is the code that generates the XML bean and posts it to my jms :
VCALENDARDocument vcaldoc = VCALENDARDocument.Factory.newInstance();
VCALENDAR vcalendar = vcaldoc.addNewVCALENDAR();
VEVENT vevent = vcalendar.addNewVevent();
vcalendar.setProdid(form.getProdid());
vcalendar.setVersion(form.getVersion());
vevent.setDtstart(form.getDtstart());
vevent.setDtend(form.getDtend());
vevent.setSummary(form.getSummary());
vevent.setOrganizer(form.getOrganizer());
appointmentCtrl.sendAppointmentRequest(vcalendar, "12345");
Here the code in the JMS Control:
public interface AppointmentCtrl extends JMSControl,com.bea.control.ControlExtension
* @jc:jms-property key="accountIdentifier" value="{accountID}"
* @jc:jms-property key="transactionType" value="NOT SUPPORTED"
public void sendAppointmentRequest(VCALENDAR vcalendar, String accountID);
static final long serialVersionUID = 1L;
Here is how I am trying to read it off the queue in my MDB:
public void onMessage(Message msg)
VCALENDAR vcalendar = (VCALENDAR)msg;
System.out.println("Message received");
System.out.println(vcalendar.getProdid());
Here the error that i get:
<Apr 10, 2004 2:02:16 AM CDT> <Warning> <EJB> <BEA-010065> <MessageDrivenBean
th
rew an Exception in onMessage(). The exception was:
java.lang.ClassCastException.
java.lang.ClassCastException
at mdb.AppointmentEJB.onMessage(AppointmentEJB.java:24)
at weblogic.ejb20.internal.MDListener.execute(MDListener.java:382)
at weblogic.ejb20.internal.MDListener.transactionalOnMessage(MDListener.
java:316)
at weblogic.ejb20.internal.MDListener.onMessage(MDListener.java:281)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:2596)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:2516)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
>
<Apr 10, 2004 2:02:16 AM CDT> <Warning> <EJB> <BEA-010065> <MessageDrivenBean
th
rew an Exception in onMessage(). The exception was:
java.lang.ClassCastException.
java.lang.ClassCastException
at mdb.AppointmentEJB.onMessage(AppointmentEJB.java:24)
at weblogic.ejb20.internal.MDListener.execute(MDListener.java:382)
at weblogic.ejb20.internal.MDListener.transactionalOnMessage(MDListener.
java:316)
at weblogic.ejb20.internal.MDListener.onMessage(MDListener.java:281)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:2596)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:2516)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
>
Any ideas what it should look like?
Thanks,
Marc
Hi trevenator,
If you are having issues with an iPod touch directing you to connect to iTunes, you may find the following article helpful:
If you can't update or restore your iPhone, iPad, or iPod touch
Regards,
- Brenden -
How to send a PDF file as a FAX from Oracle Reports 6i
Hi
I want to know how to send a PDF file as a FAX from Oracle Reports 6i. Or please post any sample code in reports that sends PDF document as FAX
Help need immediately.
Thanks in advance. my email id is
[email protected]
Arun
nullhello,
there is no native support for directly faxing a report. you could e.g. use a fax-software that has a printer-driver that supports this.
regards,
the oracle reports team -
How to send message to a multi-consumer queue using pl/sql
How to send message to a multi-consumer queue using pl/sql ? Thanks.
I tried following, but got an message: no receipient specified.
DBMS_AQ.ENQUEUE(
queue_name => 'aqadm.multi_queue',
enqueue_options => queue_options,
message_properties => message_properties,
payload => my_message,
msgid => message_id);
COMMIT;
END;
/Here's two way to enqueue/publish new message into multi-consumer queue.
(1) Use explicitly declared recipient list
- Specify "Recipients" by setting recipient_list to messge_properties, before ENQUEUE().
DECLARE
recipients DBMS_AQ.aq$_recipient_list_t;
BEGIN
recipients(1) := sys.aq$_agent('RECIPIENTNAME',NULL,NULL);
message_properties.recipient_list := recipients ;
(2)Or, declare subscriber list permanently. Then you need not to specify recipient list each time you call ENQUEUE().
begin
dbms_aqadm.add_subscriber(
queue_name=>'YOURQUEUE',
subscriber=> sys.aq$_agent('RECIPIENTNAME', null, null)
end;
You can add 1024 local subscriber include maximum 32 remote-queue-consumer to one queue. -
HT201290 how fail send Airdrop Photos and Videos to and from OS X 10.10.2 and iOS 8.
how fail send Airdrop Photos and Videos to and from OS X 10.10.2 and iOS 8.
Airdrop Photos and Videos to and from OS X 10.10.2 and iOS 8.
-
Need help to connect tibco jms queues from OSB
Hi,
We have a requirement in our project "to connect tibco JMS Queues from OSB".
The Queres are created by some othes in remote system, they provided us the details to connect the Queue. the detail are:
Queue Name :EXT_WEALTHHUB.TO_EXT.SYNC.REQ
Jndi Factory :SSLQueueConnectionFactory
and hostName , PORT
Credentails are provided.
We entered the same details in Business service in transport page by choosing 'jms' as protocol and EndpointURI as.
"jms://100.10.XX.YY:1234/SSLQueueConnectionFactory/EXT_WEALTHHUB.TO_EXT.SYNC.REQ"
And we created a service account to maintain the credentials and browsed the same at service account in the business service.
In JMS Transport Page we selected
Response Queue : One for all Request URI's
Response Pattern : JMS CorrelaltionID
Response UI :jms://100.10.XX.YY:1234/SSLQueueConnectionFactory/EXT_WEALTHHUB.TO_EXT.SYNC.RESP
when we are trying to establish a connection with the above queue getting
javax.naming.CommunicationException [Root exception is weblogic.socket.UnrecoverableConnectException: [Login failed for an unknown reason: er.deployer.MessageDrivenBeanInfoImpl.getInitialContext(MessageDrivenBeanInfoImpl.java:733)
at weblogic.ejb.container.deployer.MessageDrivenBeanInfoImpl.getInitialContext(MessageDrivenBeanInfoImpl.java:689)
at weblogic.jms.common.CDS$DD2Listener$1.run(CDS.java:1018)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.jms.common.CrossDomainSecurityManager.runAs(CrossDomainSecurityManager.java:130)
at weblogic.jms.common.CDS$DD2Listener.getInitialContextFromListener(CDS.java:1012)
at weblogic.jms.common.CDS$DD2Listener.getInitialContext(CDS.java:984)
at weblogic.jms.common.CDS$1.run(CDS.java:436)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.jms.common.CrossDomainSecurityManager.runAs(CrossDomainSecurityManager.java:130)
at weblogic.jms.common.CDS.createInitialContext(CDS.java:431)
at weblogic.jms.common.CDS.getDDMembershipInformation(CDS.java:270)
at weblogic.ejb.container.deployer.MessageDrivenBeanInfoImpl.createMDManagers(MessageDrivenBeanInfoImpl.java:1455)
at weblogic.ejb.container.deployer.MessageDrivenBeanInfoImpl.activate(MessageDrivenBeanInfoImpl.java:1252)
at weblogic.ejb.container.deployer.EJBDeployer.activate(EJBDeployer.java:1320)
at weblogic.ejb.container.deployer.EJBModule.activate(EJBModule.java:493)
at weblogic.application.internal.flow.ModuleListenerInvoker.activate(ModuleListenerInvoker.java:227)
at weblogic.application.internal.flow.DeploymentCallbackFlow$2.next(DeploymentCallbackFlow.java:531)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:165)
at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:157)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:1267)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:409)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:569)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:150)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:116)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844)
at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440)
at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:163)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:13)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:68)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: weblogic.socket.UnrecoverableConnectException: [Login failed for an unknown reason: in.checkLoginSuccess(Login.java:131)
at weblogic.rjvm.t3.MuxableSocketT3.connect(MuxableSocketT3.java:403)
at weblogic.rjvm.t3.ConnectionFactoryT3.createConnection(ConnectionFactoryT3.java:34)
at weblogic.rjvm.ConnectionManager.createConnection(ConnectionManager.java:1777)
at weblogic.rjvm.ConnectionManager.findOrCreateConnection(ConnectionManager.java:1417)
at weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:437)
at weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:316)
at weblogic.rjvm.RJVMManager.findOrCreateRemoteInternal(RJVMManager.java:254)
at weblogic.rjvm.RJVMManager.findOrCreate(RJVMManager.java:197)
at weblogic.rjvm.RJVMFinder.findOrCreateRemoteServer(RJVMFinder.java:238)
at weblogic.rjvm.RJVMFinder.findOrCreateInternal(RJVMFinder.java:200)
at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:170)
at weblogic.rjvm.ServerURL.findOrCreateRJVM(ServerURL.java:153)
at weblogic.jndi.WLInitialContextFactoryDelegate$1.run(WLInitialContextFactoryDelegate.java:345)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:340)
at weblogic.jndi.Environment.getContext(Environment.java:315)
at weblogic.jndi.Environment.getContext(Environment.java:285)
at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:117)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
at javax.naming.InitialContext.init(InitialContext.java:223)
at javax.naming.InitialContext.<init>(InitialContext.java:198)
at weblogic.ejb.container.deployer.MessageDrivenBeanInfoImpl$2.run(MessageDrivenBeanInfoImpl.java:748)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.ejb.container.deployer.MessageDrivenBeanInfoImpl.doPrivilagedAction(MessageDrivenBeanInfoImpl.java:2238)
at weblogic.ejb.container.deployer.MessageDrivenBeanInfoImpl.getInitialContext(MessageDrivenBeanInfoImpl.java:733)
at weblogic.ejb.container.deployer.MessageDrivenBeanInfoImpl.getInitialContext(MessageDrivenBeanInfoImpl.java:689)
at weblogic.jms.common.CDS$DD2Listener$1.run(CDS.java:1018)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.jms.common.CrossDomainSecurityManager.runAs(CrossDomainSecurityManager.java:130)
at weblogic.jms.common.CDS$DD2Listener.getInitialContextFromListener(CDS.java:1012)
at weblogic.jms.common.CDS$DD2Listener.getInitialContext(CDS.java:984)
at weblogic.jms.common.CDS$1.run(CDS.java:436)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.jms.common.CrossDomainSecurityManager.runAs(CrossDomainSecurityManager.java:130)
at weblogic.jms.common.CDS.createInitialContext(CDS.java:431)
at weblogic.jms.common.CDS.getDDMembershipInformation(CDS.java:270)
at weblogic.ejb.container.deployer.MessageDrivenBeanInfoImpl.createMDManagers(MessageDrivenBeanInfoImpl.java:1455)
at weblogic.ejb.container.deployer.MessageDrivenBeanInfoImpl.activate(MessageDrivenBeanInfoImpl.java:1252)
at weblogic.ejb.container.deployer.EJBDeployer.activate(EJBDeployer.java:1320)
at weblogic.ejb.container.deployer.EJBModule.activate(EJBModule.java:493)
at weblogic.application.internal.flow.ModuleListenerInvoker.activate(ModuleListenerInvoker.java:227)
at weblogic.application.internal.flow.DeploymentCallbackFlow$2.next(DeploymentCallbackFlow.java:532)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:165)
at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:158)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:1269)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:409)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:569)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:150)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:116)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844)
at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253)
at weblogic.deploy.internal.targetserver.DeploymentM
Any pointers on how to resolve the above issue will be a greate help to us.
Thanks in AdvanceWrong forum, please ask this on dedicated weblogic or soa forums
-
NoClassDefFoundError while accessing JMS Queue from JDev 10.1.3.3
Hi,
I'm trying to get a handle of a JMS queue, which resides on Oracle App Server 10.1.3.4, from a Java Program which I'm trying to run from JDeveloper 10.1.3.3.
I'm trying to make an RMI connection to the App server from JDeveloper by passing following information to the intialContext:
env.put("java.naming.factory.initial",
"oracle.j2ee.rmi.RMIInitialContextFactory");
env.put(Context.PROVIDER_URL,
"ormi://wafedabpelqa10.corp.weyer.pri:12402");
env.put("java.naming.security.principal","oc4jadmin");
env.put("java.naming.security.credentials","welcome1");
Where the above information is related to our App Server.
I'm successfully able to establish an RMI connection from JDev to Oracle App Server and can lookup datasources created on the App server using their
JNDI names. However if I try to look up a JMS Queue from the App server using its JNDI name, I get an error as:
java.lang.NoClassDefFoundError: oracle/tip/adapter/api/OracleConnectionFactory
I have also tried to use the value "com.evermind.server.rmi.RMIInitialContextFactory" for "java.naming.factory.initial",
however I still get the same error.Hi,
this should work and you need to download the rmi library http://www.oracle.com/technology/software/products/ias/htdocs/utilsoft.html
thanks
# String queueName = "jms/MyJMSQueue";
# String queueConnectionFactoryName = "jms/MyJMSQCF";
# Context ctx;
# try {
# Properties parm = new Properties();
# parm.setProperty("java.naming.factory.initial","com.evermind.server.rmi.RMIInitialContextFactory");
# parm.setProperty("java.naming.provider.url","ormi://localhost:23791/");
# parm.setProperty("java.naming.security.principal","oc4jadmin");
# parm.setProperty("java.naming.security.credentials","welcome");
# ctx = new InitialContext(parm);
# QueueConnectionFactory connectionFactory =
# (QueueConnectionFactory)ctx.lookup(queueConnectionFactoryName);
# connection = connectionFactory.createQueueConnection();
# connection.start();
# session = connection.createQueueSession(false, Session.AUTO_ACKNOWLEDGE);
# queue = (Queue)ctx.lookup(queueName);
# sender = session.createSender(queue);
# receiver = session.createReceiver(queue);
# } catch (JMSException je) {
# throw new RuntimeException("Fout opgetreden bij het starten ",
# je);
# } catch (Throwable t) {
# throw new RuntimeException("Fout opgetreden bij het starten ",
# t);
# } -
Writing to a JMS queue from Tux-service?
Greetings,
is there any way to write to a JMS-queue from a Tuxedo/atmi service without
using WebLogic Server (because of WTC needing it)?
LaraLara,
One way to write to a JMS-queue from a Tux service would be by using JNI functions.
Inside your server's tpsvrinit function you can create a JVM (using JVM_CreateJavaVM
function) and instantiate a couple of Java objects. You may then call Java methods
on these objects from your Tux services. At the server's tpsvrdone function you
must then destroy the Java objects and the JVM.
Regards,
Lazaros
"Lara Faiazza" <[email protected]> wrote:
Greetings,
is there any way to write to a JMS-queue from a Tuxedo/atmi service without
using WebLogic Server (because of WTC needing it)?
Lara -
How can i stop transfer data to Trfc queue from a table datasource.help!!!
how can i stop transfer data to Trfc queue from a table datasource.
I create a incorrect view datasource in R3 with wrong join condition,it contain so large data,i want to stop it collect data to sm58.otherwise the system will be ...
i can't find helpful infrmation in sm50 .
in sm37 has a canceled job
Job Ln Job CreatedB Status Start date Start time Duration(sec.) Delay (sec.)
BIREQU_4EFQCFFUQL5ZOAWYOK2L0YCMF ALEREMOTE Canceled 2009-07-10 16:38:59 101,869 0
plesse help me 。Hi,
You paste the job name in source system in
Tcode :Sm37
Job name as :BIREQU_4EFQCFFUQL5ZOAWYOK2L0YCMF
User:*
Go to job details and get the PID no ,on which application number it is runnug
GO to sm51 ,here you will find the application servers,Select the appriate app server go to that PID.
On left top most you will find option as cancel with out core ..
OR
Ask basics team do the same.
Regards,
Suman
Edited by: suman on Jul 13, 2009 12:56 PM -
Message lost during Message Send in weblogic 9.2 JMS
I am using Weblogic Server 9.2 in a clustered environment (2 nodes in separate machines). The application deployed has ejb timers which picks up data from DB, and sends text messages (very small size as its just an ID) to a Queue (using the JMS APIs - QueueSender.send(message)). There is an MDB (with max-beans-in-free-pool) configured to be 20 listenting to this message. There might be 1-20 records picked up from the DB and the id of those records will be sent to the JMS Queue as separate JMS messages. i.e. QueueSender.send will be called as many times as there are record ids to send. The timer after sending the message to the queue sets the status of all the data it picked up to "Busy" in the same transaction as the message send. We are using XA driver and the JMS Connection factory is also XA enabled. We had problems with this XA transaction as weblogic sometimes sends the messages and before db commit happened to set the status to "Busy". We had a workaround to this problem by setting the JMS Connection factory setting "time to Deliver" to 300 so that the messages are visible to the MDB only after 300 ms thereby giving time for db commit to be over as per the suggestion in the following link. http://jayesh-patel.blogspot.com/. We had done this 2 months back and to date we find no problem.
Now we are facing another strange problem. The JMS sometime misses delivering the messages. This is evident from the logs we had printed from the MDB. The logs indicate some messages has reached the MDB and some did not. This problem occurs occasionally. Also what I see is that this had occured under normal load conditions only though this application operates under high loads (number of messages being processed per day may go up to 5000). In the last one month this had occured 3 times. The JMS messaging is becoming unreliable.
This seems to be a bug in Weblogic 9.2 JMS. Is there any workaround to prevent this problem. ?It is doubtful that JMS is losing messages. Suggestions:
* Try increasing your sheduled message delay. 300 millis is a short delay -- any small network glitch, disk hardware issue, or even a single JVM GC in the JDBC driver can cause the database to take longer than 300 millis to complete its part of the transaction.
* Try "WebLogic JMS Message Lifecycle Logging" if you want to trace message activity.
* Instead of the delay, consider using WebLogic's Datasource "LLR" option, a commonly used solution to your use case. This is an optimization option that yields fully ACID (safe) transactions, and has the very nice side effect of deterministically forcing the TM to always commit the database portion of a transaction before committing any other resources participating in the same transaction.
Links:
http://download.oracle.com/docs/cd/E13222_01/wls/docs92/jms_admin/troubleshoot.html
http://download.oracle.com/docs/cd/E13222_01/wls/docs92/jta/llr.html#LLRfailover
http://download.oracle.com/docs/cd/E13222_01/wls/docs92/jdbc_admin/jdbc_datasources.html#llr
Tom
Edited by: TomB on May 7, 2010 5:20 PM -
How to read the messages in the JMS Queue using JMX
Hi,
I want to read messages in the JMS queue using JMX. I was able to read using QueueBrowser but want to modify priority of the messages using JMX.
I tried to use JMSDestinationRuntimeMBean but it does not allow us to read messages unless we pass the message Id. Is there any way that I can get all the messages in the queue.
I am using Weblogic 8.1 SP4
Can someone please help me in this regard.
Thanks,
Kiran.
Edited by KGudipati at 10/22/2007 1:22 AMHi,
As far as i know, JMS Object Messages is not supported by XI JMS adapter.
you need to have the JMS provider to transform the message to bytes messages.
(Refer to SAP note 856346) -
How to send the Adobe page as mail attachement from webdynpro...
Hi Experts,
How to send the Adobe page as external mail attachment from webdynpro automatically (for example: If I input the data for sales order in a view and created the sales order, if the sales order is created then have to place the created sales order number and the some details in a adobe form and should send as external mail and have to specifying the body as "Sales order created and details can be found in the attached adobe form" from webdynpro).
Do the needful.
Thanks & regards,
Ravi.Hi ravi,
See the WDA forum for the how to attach a file in webdynpro component for the attachments. -
How to send the email to different email addresses from Workflow
Hello,
i an not getting that how to send the email from Workflow in SAP.
plz give the steps to do that.
i have done lots of time but system is not sending the email to different email address.Hi,
lot of configuration is invloved in sending
mail to external email id. check BASIS to
configure for external mails ans also check
debug FM and see which conditions exceptions
(Document not sendis raised)
also check below code
CLEAR: DOC_CHNG, OBJTXT, OBJBIN, OBJPACK, OBJHEAD, RECLIST,
RECIPIENT_INT, DOC_SIZE,TAB_LINES.
REFRESH: OBJTXT, OBJBIN, OBJPACK, OBJHEAD, RECLIST.
OBJBIN[] = CONTENT_OUT[].
Populate e-mail title
DOC_CHNG-OBJ_NAME = 'MAIL'.
CONCATENATE 'EETS for Contract #'(245)
OIA01_TAB-EXGNUM
INTO DOC_CHNG-OBJ_DESCR SEPARATED BY SPACE.
DESCRIBE TABLE OBJTXT LINES TAB_LINES.
READ TABLE OBJTXT INDEX TAB_LINES.
DOC_CHNG-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( OBJTXT ).
It is a text document
CLEAR OBJPACK-TRANSF_BIN.
The document needs no header (head_num = 0)
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 0.
but it has a body
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
of type RAW
OBJPACK-DOC_TYPE = 'RAW'.
APPEND OBJPACK.
Create the attachment (the list itself)
DESCRIBE TABLE OBJBIN LINES TAB_LINES.
It is binary document
OBJPACK-TRANSF_BIN = 'X'.
we need no header
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 0.
but a body
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
of type PDF
OBJPACK-DOC_TYPE = 'PDF'.
OBJPACK-OBJ_NAME = 'Attachment'(239).
CONCATENATE 'EETS_' OIA01_TAB-EXGNUM '_'
IT_ZMMTACCUID-ACCTUSRID
'_' SY-DATUM '_' SY-UZEIT '.PDF'
INTO OBJPACK-OBJ_DESCR.
READ TABLE OBJBIN INDEX TAB_LINES.
DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( OBJBIN ).
OBJPACK-DOC_SIZE = DOC_SIZE.
APPEND OBJPACK.
Get e-mail address
CLEAR IT_ADDRESS.
READ TABLE IT_ADDRESS WITH KEY ACCTID = IT_ZMMTACCUID-ACCTUSRID
BINARY SEARCH.
IF SY-SUBRC = 0.
RECIPIENT_INT-ADDRESS = IT_ADDRESS-SMTP_ADR.
ENDIF.
*Send email to external mail address
RECLIST-RECEIVER = RECIPIENT_INT.
RECLIST-REC_TYPE = 'U'.
APPEND RECLIST.
CLEAR RECLIST.
*Send email to SAP Office mail address
RECLIST-RECEIVER = IT_ZMMTACCUID-ACCTUSRID.
RECLIST-REC_TYPE = 'B'.
APPEND RECLIST.
CLEAR RECLIST.
SEND THE DOCUMENT BY CALLING THE SAPOFFICE API1 MODULE
FOR SENDING DOCUMENTS WITH ATTACHMENTS
call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
exporting
document_data = doc_chng
put_in_outbox = 'X'
importing
sent_to_all = sent_to_all
tables
packing_list = objpack
object_header = objhead
contents_bin = objbin
contents_txt = objtxt
receivers = reclist
exceptions
too_many_receivers = 1
document_not_sent = 2
operation_no_authorization = 4
others = 99.
also check
https:/Re: mail sending problem
Regards
amole
Maybe you are looking for
-
Indexing error in CTXSYS.INSO_FILTER
hi, Do you know, how can i correctly creat the index in oracle text? I have created a text table: CREATE TABLE texttable(text_id int PRIMARY KEY not null, titel varchar2(500), author varchar2(20), datum date, text_size int, text_typ varchar2(10), con
-
New to CS4 and not well versed in HTML. Sometime back in an older version of DW I used layers to position photos and text on a web page. I now have CS4 and cannot figure out how to create a layer. Help menu says to simply Click on Insert>Layout Ob
-
Has anybody used LoadRunner with Weblogic? We would like to simulate HTTP clients and do some load test. I assume LoadRunner is multithreaded so our concern is: would each thread simulating a client be recognized as a different client by Weblogic = d
-
Keep getting kicked off safari
while being on the internet for a few minutes at a time it kicks me off and sends me to my home page. Is there anyway to fix this?
-
The monitor profile aoc 2343 appears to be defective.
Hi There- When I am open adobe audition (cs5.5) appear the following message: "The monitor profile AOC 2343 appears to be defective. Please rerun your monitor calibration software." I am a "novato" (newbie) in these things... I greatly appreciate