Message lost during Message Send in weblogic 9.2 JMS

I am using Weblogic Server 9.2 in a clustered environment (2 nodes in separate machines). The application deployed has ejb timers which picks up data from DB, and sends text messages (very small size as its just an ID) to a Queue (using the JMS APIs - QueueSender.send(message)). There is an MDB (with max-beans-in-free-pool) configured to be 20 listenting to this message. There might be 1-20 records picked up from the DB and the id of those records will be sent to the JMS Queue as separate JMS messages. i.e. QueueSender.send will be called as many times as there are record ids to send. The timer after sending the message to the queue sets the status of all the data it picked up to "Busy" in the same transaction as the message send. We are using XA driver and the JMS Connection factory is also XA enabled. We had problems with this XA transaction as weblogic sometimes sends the messages and before db commit happened to set the status to "Busy". We had a workaround to this problem by setting the JMS Connection factory setting "time to Deliver" to 300 so that the messages are visible to the MDB only after 300 ms thereby giving time for db commit to be over as per the suggestion in the following link. http://jayesh-patel.blogspot.com/. We had done this 2 months back and to date we find no problem.
Now we are facing another strange problem. The JMS sometime misses delivering the messages. This is evident from the logs we had printed from the MDB. The logs indicate some messages has reached the MDB and some did not. This problem occurs occasionally. Also what I see is that this had occured under normal load conditions only though this application operates under high loads (number of messages being processed per day may go up to 5000). In the last one month this had occured 3 times. The JMS messaging is becoming unreliable.
This seems to be a bug in Weblogic 9.2 JMS. Is there any workaround to prevent this problem. ?

It is doubtful that JMS is losing messages. Suggestions:
* Try increasing your sheduled message delay. 300 millis is a short delay -- any small network glitch, disk hardware issue, or even a single JVM GC in the JDBC driver can cause the database to take longer than 300 millis to complete its part of the transaction.
* Try "WebLogic JMS Message Lifecycle Logging" if you want to trace message activity.
* Instead of the delay, consider using WebLogic's Datasource "LLR" option, a commonly used solution to your use case. This is an optimization option that yields fully ACID (safe) transactions, and has the very nice side effect of deterministically forcing the TM to always commit the database portion of a transaction before committing any other resources participating in the same transaction.
Links:
http://download.oracle.com/docs/cd/E13222_01/wls/docs92/jms_admin/troubleshoot.html
http://download.oracle.com/docs/cd/E13222_01/wls/docs92/jta/llr.html#LLRfailover
http://download.oracle.com/docs/cd/E13222_01/wls/docs92/jdbc_admin/jdbc_datasources.html#llr
Tom
Edited by: TomB on May 7, 2010 5:20 PM

Similar Messages

How to send to Weblogic 9.1 JMS queue from EJB running in Glassfish?

Hi.
I hope this is the correct forum.
I need to send a message to a jms queue on a remote weblogic 9.1 server. To this end I believe I will have to:
1) Install one or more weblogic client libraries/jar files on my glassfish application server. The weblogic server expects communication in the "t3" protocol, which I believe tunnels iiop, jms etc. inside their own proprietary protocol
2) Define the jms queue in my glassfish application server with a queue connection factory that creates the queue using classes from the weblogic jars?
3) Otherwise code the EJB methods sending messages as I would code and send messages to any jms queue
It's the first two steps that have me baffled. The more I dig in glassfish administrator's manual, the more confused I become.
Anybody have any idea if/how this can be accomplished?
Some reference to where I may find information as to how to accomplish this?
Thank you,
Jacob.

Jacob,
I suggest you try, either a GlassFish forum (http://forums.java.net/jive/forum.jspa?forumID=56), or perhaps the GenericJMSRA project https://genericjmsra.dev.java.net .This forum is primarily about the Sun JMS provider, Java MQ or Open MQ -- or the JMS Specification.
-- Ed Bratt

Messages are getting lost during server restart

Hi,
we have a clustered environment.
soa_server1, soa_server2, soa_server3 and osb_server1, osb_server2, osb_server3
Queues are configured on each server.
Overall process flow is (JMS Queue (configrued in soa_server1) --> BPEL --> mediator -->JMS (configrued in osb_server1) --> proxyService --> Target System.
When there is a need to bounce the server (start / stop) ; and to make sure messages are not lost during server bounce.
we are following the below procedure for server start
1) pause soa_server1 queues then bounce soa_server1
2) pause soa_server2 queues then bounce soa_server2
3) pause soa_server3 queues then bounce soa_server3
We are observing there is a message lost after server bounce...
thanks in advance
anvv sharma

Are you using XA connection factory? If no then this may cause message loss. It is also considered a best practice to configure error queue for JMS queues to avoid message loss (as a precautionary measure).
How did you find that messages are getting lost?
Regards,
Anuj

I'm using Entourage 2008 v 12.3.5 and lost ability to SEND. Tried many small email tests. Server continues to leave time out message. "An operation on the server timed out. The server may be down, overloaded, or there may be too much net traffic.

I'm using Entourage 2008 v 12.3.5 and lost ability to SEND. Tried many small email tests. Server continues to leave time out message. "An operation on the server timed out. The server may be down, overloaded, or there may be too much net traffic." Comcast tells me server is not down all other network activity is fine. WHat's up with this?

Starting earlier today, this also became my problem - can receive but not send in Entourage. The account settings are correct in Entourage - I even created a new account. My Mac running 10.7.5 won't read the original Office : MAC 2008 disk, so I can't do a fix or reinstall from the disk.
This is not an issue if I log onto the Comcast site.
And so, I started using Mail but, unlike Entourage, Mail won't import my Entourage info.
Argh... :-(

I cannot install Adobe Flash Player. I have windows 7 64bit and firefox browser. During install i get a message 'lost connection', followed by 'trying to reconnect', and then connection failed

I cannot install Adobe Flash Player. I have windows 7 64bit and firefox browser. During install i get a message 'lost connection', followed by 'trying to reconnect', and then connection failed

Many thanks for this! I managed to install the Flash Player with this successfully after many failed attempts before.
Thanks again
Jason Pearlson
From: Jeromie Clark <[email protected]>
To: Jason Pearlson <[email protected]>
Sent: Wednesday, March 25, 2015 10:46 PM
Subject: I cannot install Adobe Flash Player. I have windows 7 64bit and firefox browser. During install i get a message 'lost connection', followed by 'trying to reconnect', and then connection failed
I cannot install Adobe Flash Player. I have windows 7 64bit and firefox browser. During install i get a message 'lost connection', followed by 'trying to reconnect', and then connection failed
created by Jeromie Clark in Installing Flash Player - View the full discussionPlease use the offline installer Internet Explorer: http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player_ax.exe Firefox and other NPAPI browsers: http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player.exe If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7349939#7349939 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7349939#7349939 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Installing Flash Player by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

I've lost the "Send, Reply All, Attach,..." etc bar and drop down options for New Messages and Forwarded messages. How do I get it back?

I only get the option to "Send" etc. (either as an icon at the top of the message window, or in the messages drop-down menu) on messages to which I am replying, but not to new messages or forwarded messages. How do I get the options back?

I think your main mail pref file is damaged...
/Users/YourUserName/Library/Preferences/com.apple.mail.plist
Specifically...
<key>NSToolbar Configuration MainWindow</key>
          <dict>
                    <key>TB Display Mode</key>
                    <integer>1</integer>
                    <key>TB Icon Size Mode</key>
                    <integer>1</integer>
                    <key>TB Is Shown</key>
                    <integer>0</integer>
(Last number should be 1 to be shown, zero to be hidden, so either that number is zero, or it quits reading the file before it gets to that point).

How to acces the filename from Message Header during variable substitution

Hi,
We need to access the attribute filename from Message Header during Variable Substitution.We are able to access the following attributes of Message Header
sender_party, sender_service, receiver_party, receiver_service, interface_name, interface_namespace,
message_id (message ID with hyphens, for example 9fbe1ff1-9a0d-11d9-8665-cbf10a126331)
message_id_hex (message ID in hexadecimal format, for example 9fbe1ff19a0d11d98665cbf10a126331)
For example, if we want to specify the interface name from the message header in the target directory or in the file name scheme, we enter message:interface_name as the reference.
In the same way i need to access the filename which we get in the Message Header(which we get in the Message Header when we check the Adaptor specific message properties and filename in sender CC).Any suggestions on the same
Thanks and Regards,
Bhargav
Message was edited by:
        bhargav gundabolu
Message was edited by:
        bhargav gundabolu

Hi Bhargav,
Use this UDF to retreive the file name from the Dynamic Configuration Payload in the mapping.
getFileName(UDF) -
> Filename(node in the target structure).
public String getFileName(Container container)
   //write your code here
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String ourSourceFileName = conf.get(key);
return ourSourceFileName;
Create a node in the target structure top hold the filename returned by the UDF.
Now your payload will have the filename along with the actual data.
U can use the variable substution now as u use for the other data in the payload since the filename is now a part of your payload.
Regards
San

I can no longer log into my ichat linked to my gmail. right after opening up ichat, receive the following message: lost connection with jabber. the server has unexpectedly disconnected.

i can no longer log into my ichat linked to my gmail. right after opening up ichat, receive the following message: lost connection with jabber. the server has unexpectedly disconnected. how to troubleshoot? thanks.

Hi,
There can be many reasons why the Login is "up the creek".
Any break in the network at your end whilst logged in will cause an issue.
A sort of discrepancy between what iChat thinks the state should be and what the server thinks.
If they don't agree the server will refuse to accept.
A Crash at the server end which does not log you out properly will also do it.
Any file at any time can be come corrupted.
Luckily with the iChat .plists they are recreated if removed with an iChat Restart.
If it were AIM you can also get your Account Suspended and this will not log you in.
(It tends to happen from Chat rooms where people notify AIM about bad behaviour (as they see it) and you have to apply to get Un-suspended).
Most of the big IM services use multiple servers.
Sometimes these go out of Sync.
In the case of AIM this happens when they remove Old unused Screen Names from people's Buddy List prior to making them available for re-registration. I am not sure if this happens at Google.
You seem to be talking about an account that has worked at Work and having new computer at home.
As I mentioned the Priority thing you have not said that it has coincided with the new computer logging in (this will kick the work Computer out of Google whether you are logged in on the Web Mail page or in iChat)
IN addition to that iChat stays partially logged in for Off Line IMs
This is done in the background by a support app called iChatAgent
If your Computer is ON but ichat is not started people can still send you Messages.
Instead of saving these on the server until you login iChat will start up.
Depending if the home Mac is effecting the Work Login it may be holding sway over your Login.
Using your girlfriend's login may have booted her Off Line where she normally uses the name/login.
The AIM Side can be specifically set to allow Multiple Logins and therefore NOT allow them. If this happens you get a warning and messages to do something about it.
You do not get these in any Jabber or Google Login as the Priority setting is supposed to take care of it.
If the Login works at the Web Mail Login and on one computer then the .plist on the work computer is the most likely issue.
There is a small chance that a Corrupt Buddy Pic (Home Folder/Library/Caches/com.apple.iChat/Pictures) may be the cause.
Set this folder to icon view and also use the Finder's View Menu > Show View Options and select icon view.
This should show all pics as their icon.
Check that all display properly.
At this point I would try a COMBO version update install of the last Update you did over what you have.
This often corrects hard to trace things
The 10.5.8 COMBO is here
11:28 PM Monday; June 20, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.7)
 Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

I am having multiple problems with my iphone 4s, people can't hear me when I call, text messages don't always send, calls go straight to voice mail. I have all bars, have hard rest 3 times. I have called apple 4 times and gone to a store. No help.

I have had the 3g, 3gs, 4 and little if any problems. I made a major mistake buying the 4s. What a horrible phone. I must say, apple service is at best, BAD. Here are the basics. I am on the same network, I call the same people, I use the same text messages as I did with the 4. With the 4s, I will call someone and they will not be able to hear me. I have to hang up and recall. Or the phone just does nothing when I press call. Text messages acts like they send but when I go back the have been sent. Sometimes the calls go direct to voice mail.
Here's what I have done. Reset, did not help. Called apple, advisor said she would call me back in 5 minutes, after waiting for 5 days for the call, I recalled, they walked me through the same things I had already done, then said to take it to a store. So they set up an appointment for the only day I could get to it, 1 1/2 hours away, on my grand son's birthday. That was okay if they fixed it. So they hard reset it, we had to setup 4 email accounts, they would not allow me to restore because they said it was a software problem. So I had to download all the apps, lost a lot of data. No fun. But if it worked! So Monday back at work, guess what, same thing. When home and did another hard reset. Still no lick. Called apple again. They said they would replace my phone, all they needed was to put a hold on a credit card for $899 or drive a 1 1/2 hours to a store.
So anyone know a good andriod phone.
PS I got a email asking about the service each time and each time I told them what a horrible phone it was and how bad service was. I have yet to hear back. I guess they do not read them!

You're not speaking to Apple on in this forum, nor will someone from Apple see this post. We are just users like you and I.
Have you tried to restore or reset your phone?
Or contact your carrier in re: to your sim card

CM1312 NFP: WIndows 7: USB Error message ~"Lost Connection"

With the 1312 connected to my Windwos 7 desktop, periodically Windows gives an error message that indicates that it has lost connection to the printer. Unplugging and replugging the USB cable fixes the problem. Otherwise the print & scan functions work perfectly. Symptomatically it appears as if the printer goes to sleep and stops responding to whatever "keep alive" messages Windows might be sending. Is there a setting in the printer, in Windows or in the printer driver software that can prevent this message?
BTW, the other way to work around this problem is to just access the printer via the Ethernet but the scan funciton is not accessible via the network (an unfortunate limitation).

aluniewski,
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/ .
I hope this helps.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

System Error During Message Mapping

I've set up a simple mapping scenario that sends a DEBMAS06 IDoc from our R/3 system to XI mapping to DEBMAS06 and writing out to a file. I am getting the following system error during message mapping:
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">JCO_SYSTEM_FAILURE</SAP:Code>
<SAP:P1>Server repository could not create function template for 'SMPP_CALL_JAVA_RUNTIME</SAP:P1>
I have gone back to the Design Builder and tested out the message mapping and the interface mapping and both work successfully. I have also taken the payload of the message and submitted it via the RWB and it generates the same error as when sent from R/3. Any other places I can look?

Hi Mike,
You have got the connectivity issue problem between ABAP and J2EE stack. When do the test in the Message Mapping, thats the J2EE and it works. But during the runtime it has to go to the Integratin Server, which is the ABAP stack. Fix the connectivity issue, check the smicm,trace and debug log etc.
Hope this helps.
Cheers,
Ranjan

432 4.2.0 STOREDRV.Deliver; Agent transient failure during message resubmission

I am having an issue where emails to specific users internal to internal are being successfully delivered, but [a duplicate is?] also getting stuck in the "SMTP Delivery to mailbox" queue, with the sender getting a "Delivery is delayed to
these recipients or groups:" "Remote Server returned '400 4.4.7 Message delayed" This only happens with emails to specific people in the organization, they get the email immediately after being sent, and everyone else works fine. This issue
started after we migrated the users mailboxs from Exchange 2007 to Exchange 2013 CU5, we did not notice the issue until we finished moving all user mailboxes to 2013.
Delivery Report of email to affected user:
Delivered
6/30/2014 11:20 AM mail.domain.com
The message was successfully delivered.
Pending
6/30/2014 11:20 AM
The message has been queued on server 'mail.domain.com' since 6/30/2014 11:20:15 AM (UTC-06:00) Central Time (US & Canada). The last attempt to send the message was at 6/30/2014 11:21:09 AM (UTC-06:00) Central Time (US & Canada) and generated the error
'[{LRT=};{LED=432 4.2.0 STOREDRV.Deliver; Agent transient failure during message resubmission[Agent: Mailbox Rules Agent]};{FQDN=};{IP=}]'.
-Strange time stamp
Original message headers:
Received: from mail.domain.com (172.22.220.68) by
mail.domain.com (172.22.220.68) with Microsoft SMTP Server (TLS)
id 15.0.913.22; Sun, 29 Jun 2014 21:36:34 -0500
Received: from mail.domain.com ([fe80::1554:6e6f:4ca5:85be]) by
mail.domain.com ([fe80::1554:6e6f:4ca5:85be%12]) with mapi id
15.00.0913.011; Sun, 29 Jun 2014 21:36:34 -0500
Content-Type: application/ms-tnef; name="winmail.dat"
Content-Transfer-Encoding: binary
From: T S <[email protected]>
To: M M <[email protected]>
CC: D M <[email protected]>
Subject: FW: Migration Complete
Thread-Topic: Migration Complete
Thread-Index: Ac+UAzn/W6u8OF7qRG2V93cDeqU24wACDqXL
Date: Sun, 29 Jun 2014 21:36:33 -0500
Message-ID: <[email protected]>
References: <[email protected]>
In-Reply-To: <[email protected]>
Accept-Language: en-US
Content-Language: en-US
X-MS-Has-Attach: yes
X-MS-TNEF-Correlator: <[email protected]>
MIME-Version: 1.0
X-Originating-IP: [71.170.174.74]
Return-Path: [email protected]
Update 7/2/14:
Checked event viewer, and found that event ID 1051, erroring multiple times per second with message:
"Agent 'Mailbox Rules Agent' caused an unhandled exception 'StoreDriverAgentTransientException: Store Driver Agent was unable to send email.' while handling event 'OnDeliveredMessage'"
Ran Test-MailFlow on my mailbox, and the two know non-working mailboxes, For me it returned as successful, but showed as a Failure on the two other accounts.
The test emails were actually delivered to the user mailboxes even though it shows as a Failure with the Test-MailFlow command:
From Exchange Queue viewer you can see the test emails stuck in retry, with the following information:
Identity: mail\3112\1395864371267
Subject: Test-Mailflow 8f33ae76-fdd9-4528-8e73-5b9f2481a333 66c7004a-6860-44b2-983a-327aa3c9cfec
Internet Message ID: <[email protected]>
From Address: SystemMailbox{658b82cc-efc2-4407-8c92-8303213c63e2}@domain.com
Status: Retry
Size (KB): 8
Message Source Name: SMTP:Default mail
Source IP: 172.22.220.68
SCL: 0
Date Received: 7/1/2014 9:52:12 PM
Expiration Time: 7/3/2014 9:52:12 PM
Last Error: 432 4.2.0 STOREDRV.Deliver; Agent transient failure during message resubmission[Agent: Mailbox Rules Agent]
Queue ID: mail\3112
Recipients: [email protected];3;3;[{LRT=};{LED=432 4.2.0 STOREDRV.Deliver; Agent transient failure during message resubmission[Agent: Mailbox Rules Agent]};{FQDN=};{IP=}];0;CN=Mailbox Database 2111459242,CN=Databases,CN=Exchange Administrative
Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=LCS,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=com;0

Hi S Calkin,
According to the error messages, I find following information for your reference:
1. About Event ID 1051
This warning event indicates that the transport agent referenced in the event description has encountered an unhandled exception while handing the event.
More details in the following article:
http://www.microsoft.com/technet/support/ee/transform.aspx?ProdName=Exchange&ProdVer=8.0&EvtID=1051&EvtSrc=MSExchange+Extensibility
2. About "432 4.2.0 STOREDRV.Deliver; Agent transient failure during message resubmission[Agent: Mailbox Rules Agent]"
I suggest double check whether you have enough space. I find a similar case that caused by the low space, please see this:
432 4.2.0 STOREDRV.Deliver; Agent transient failure during message resubmission[Agent: Mailbox Rules Agent]
http://social.technet.microsoft.com/Forums/exchange/en-US/750d89fb-1832-4aaf-b095-c2b9defec977/432-420-storedrvdeliver-agent-transient-failure-during-message-resubmissionagent-mailbox-rules?forum=exchangesvrgeneral
Thanks
Mavis
Mavis Huang
TechNet Community Support

Got an error message -43 during back up step of recent update

Received an error message (-43) during back up step of recent update attempt to iOS 5 for my iPhone 4. Tried several times with the same error message. Anyone know how to get around this issue?

And now, with the new iCloud Control Panel 1.1, still an error, in English this time:
Outlook Setup Error
Your setup couldn't be started because of an unexpected error.
I was able to click the Report button, here's the beginning of the text it emailed:
Help Apple improve its products by sending us diagnostic and usage information about iCloud.
By sending this message, you agree that Apple will collect and use this information as part of its support services and to improve its products and services. To learn more about Apple's Privacy Policy, see http://www.apple.com/legal/privacy.
Your setup couldn't be started because of an unexpected error.
Error: 0x80004005: CopyPSTFoldersToCache
Error: 0x80004005: GetZ1Store
Error: 0x80004005: HrGetOneProp on Z1Store failed
AppleOutlookDAVConfig version: 3.2.16.0
Windows version (6.1.7601): Windows 7 Ultimate Edition Service Pack 1 (build 7601), 64-bit
Local app data directory test: Pass
Temp directory test: Pass
Outlook version: 14 (14.0.6109.5005), x64
Outlook location (installed): C:\Program Files\Microsoft Office\Office14\OUTLOOK.EXE
MAPI location: C:\Program Files\Common Files\SYSTEM\MSMAPI\1033\MSMAPI32.DLL
MAPI logon succeeded
Message Stores Table:
Outlook Data File, 4E495441F9BFB80100AA0037D96E0000
Outlook Data File, 4E495441F9BFB80100AA0037D96E0000
Outlook Data File, 4E495441F9BFB80100AA0037D96E0000
Outlook Data File, 4E495441F9BFB80100AA0037D96E0000
Outlook Hotmail Connector Store Service, 975C4FC305EB4BBBB1992A7570EC7CF9
Outlook Data File, 4E495441F9BFB80100AA0037D96E0000
Outlook Data File, 4E495441F9BFB80100AA0037D96E0000
Outlook Data File, 4E495441F9BFB80100AA0037D96E0000
Contents of C:\Program Files\Common Files\SYSTEM\MSMAPI\1033\mapisvc.inf
[Services]
NOTES=Lotus Notes Mail
MSN_CON=Microsoft Outlook Hotmail Connector
APLZODSERVICE=iCloud
[NOTES]
PR_SERVICE_DLL_NAME=nwnsp.dll
PR_SERVICE_SUPPORT_FILES=nwnsp.dll
PR_SERVICE_DELETE_FILES=nwnsp.dll
PR_SERVICE_ENTRY_NAME=ServiceEntry
continued...

HT201320 lost original message - how do I set up Windows mail on my new ipad to create new email messages?

Lost original message. How do I set up Windows email on my new ipad so that I can create new emails?

I responded to the question that you can't seem to find. You have to use whatever email provider that you have .... Yahoo, Gmail, whoever you have,
Did you try adding your email account to the iPad in Settings>Mail, contacts, calendars>Add Account?
This may be helpful.
http://www.apple.com/support/ipad/assistant/mail/
After you add your email account you can send and receive emails in the iPad Mail App.

Iphone froze in the middle of text message, self rebooted, deleted all of my text messages, and can't send/receive now

I was replying to a couple of text messages today when the sending animation froze. My iPhone restarted on its own and when it turned back on my messages application was wiped clean and now I am unalbe to send any message. When I attempt to compose a message and select a contact, "no name" appears in the TO: field.

iOS 7.1.2, huh? It MAY be having some trouble with the iOS 8.x devices and latest iCloud features. Although it meets the minimum system requirements, it does not meet the recommended ones - System requirements for iCloud - Apple Support
You should try Restart or reset your iPhone, iPad, or iPod touch - Apple Support - this is generally the first step in troubleshooting, all devices - for all time
Message Colors
Blue is iMessage (Apple service)
Green is SMS (Carrier service)
What happens when you use your iPad similarly? (what iPad model & iOS version)
As a last resort*, Use iTunes to restore your iOS device to factory settings - Apple Support - *this document tells that all your data will be lost but provides steps to back-up (Before section) then restore your data (Restore section #4)

Message lost during Message Send in weblogic 9.2 JMS

Similar Messages

Maybe you are looking for