How to sent a message or notification to PCs on LAN using Powershell

i want to sent a message to list of PCs on LAN, how to do that, thanhk u

http://ss64.com/nt/msg.html
Don't retire TechNet! -
(Don't give up yet - 13,225+ strong and growing)

Similar Messages

  • I don´t know how to make a phone call whit my ipad...and how to sent a message? is it possible?

    i don´t know how to make a phone call whit my ipad...and how to senSeleneGMt a message? What do i need? or is it impossible?

    You can't; not natively, anyway, since the iPad is not a phone. If you want to make a call, you'll need to use some third-party Voice-Over-IP service such as Skype.
    I'm not sure what you're asking when you ask about sending a message. If you mean a text message, you can either use iMessage, which can send messages to other users also running iMessage, or you can look in the iTunes Store for SMS apps, a few of which are available. They use separate services to actually send the message and so require an Internet connection, either WiFi or 3G.
    Regards.

  • How to add a certificate to IIS global "Server Certificates" list using PowerShell?

    Hi, been surfing the web for an example on how to add a certificate to the "global" IIS "Server Certificates" list using PowerShell but to no luck. I already have code in place on how to tie / associate a specific website with a specific cert but not how
    to add the new .cer file using the "Complete Certificate Request..." wizard using PowerShell.... I dont expect the final code to become published but if someone had an idea on howto integrate / get an entry point on where to interact between the "Server Certificate"
    list in IIS and POSH I would be super happy! :|
    I am runnign IIS on a Windows 2008R2 x64 Standard Edition if that helps..... of course, I would saddle for an CLI if there is no other way, but POSH is of course the way to go! :)
    Thanks for the help in advance guys, take care!
    br4tt3

    Hi and thanks for the suggestions!
    Although it comes close, the suggested code example points on howto import / incorporate .pfx files - I am getting fed by .cer files which I need to add into the IIS console using POSH.
    I tried explore the IIS.CertObj object but was not able to work out if this one could be used for importing / adding .cer files into IIS! However, launching the following command from a POSH console with Import-Module Webadministration already
    loaded into that shell;
    $certMgr = New-Object -ComObject IIS.CertObj returns the following error message:
    New-Object : Cannot load COM type IIS.CertObj
    From an IIS perspective I have the following components installed;
    [X] Web Server (IIS)                                    Web-Server
        [X] Web Server                                      Web-WebServer
            [ ] Common HTTP Features                        Web-Common-Http
                [ ] Static Content                          Web-Static-Content
                [ ] Default Document                        Web-Default-Doc
                [ ] Directory Browsing                      Web-Dir-Browsing
                [ ] HTTP Errors                             Web-Http-Errors
                [ ] HTTP Redirection                        Web-Http-Redirect
                [ ] WebDAV Publishing                       Web-DAV-Publishing
            [X] Application Development                     Web-App-Dev
                [ ] ASP.NET                                
    Web-Asp-Net
                [X] .NET Extensibility                      Web-Net-Ext
                [ ] ASP                                    
    Web-ASP
                [ ] CGI                                    
    Web-CGI
                [ ] ISAPI Extensions                        Web-ISAPI-Ext
                [ ] ISAPI Filters                           Web-ISAPI-Filter
                [ ] Server Side Includes                    Web-Includes
            [ ] Health and Diagnostics                      Web-Health
                [ ] HTTP Logging                            Web-Http-Logging
                [ ] Logging Tools                           Web-Log-Libraries
                [ ] Request Monitor                         Web-Request-Monitor
                [ ] Tracing                                
    Web-Http-Tracing
                [ ] Custom Logging                          Web-Custom-Logging
                [ ] ODBC Logging                            Web-ODBC-Logging
            [X] Security                                   
    Web-Security
                [ ] Basic Authentication                    Web-Basic-Auth
                [ ] Windows Authentication                  Web-Windows-Auth
                [ ] Digest Authentication                   Web-Digest-Auth
                [ ] Client Certificate Mapping Authentic... Web-Client-Auth
                [ ] IIS Client Certificate Mapping Authe... Web-Cert-Auth
                [ ] URL Authorization                       Web-Url-Auth
                [X] Request Filtering                       Web-Filtering
                [ ] IP and Domain Restrictions              Web-IP-Security
            [ ] Performance                                 Web-Performance
                [ ] Static Content Compression              Web-Stat-Compression
                [ ] Dynamic Content Compression             Web-Dyn-Compression
        [X] Management Tools                                Web-Mgmt-Tools
            [X] IIS Management Console                      Web-Mgmt-Console
            [X] IIS Management Scripts and Tools            Web-Scripting-Tools
            [ ] Management Service                          Web-Mgmt-Service
            [ ] IIS 6 Management Compatibility              Web-Mgmt-Compat
                [ ] IIS 6 Metabase Compatibility            Web-Metabase
                [ ] IIS 6 WMI Compatibility                 Web-WMI
                [ ] IIS 6 Scripting Tools                   Web-Lgcy-Scripting
                [ ] IIS 6 Management Console                Web-Lgcy-Mgmt-Console
        [X] FTP Server                                      Web-Ftp-Server
            [X] FTP Service                                 Web-Ftp-Service
            [X] FTP Extensibility                           Web-Ftp-Ext
        [ ] IIS Hostable Web Core                           Web-WHC
    More or less the one thing that I am trying to get up and running is an automated FTPS solution - I just use the IIS console to be able to troubleshoot / compare how things scripted from POSH interacts in the MMC representation. The error I am getting
    might be that I am lacking some IIS components to be in place to be able to automate some parts of the IIS - as suggested by the IIS.CertObj object listed in the example..... I will get back if I can track down which component needs to be added to be
    able to reference the IIS.CertObj object.
    Br4tt3 signing out...
    br4tt3

  • How do I set up push notifications on my iPhone 4S using iTunes on my computer?

    Every time I try to go onto certain apps, a notification shows up saying connect to iTunes to use push notifications. No matter how many times I push okay the notification doesn't go away. As soon as I press ok this notification how's up right away. So when I do connect my phone to iTunes on my computer I don't know how I would set up my push notifications. Help me please and thank you.

    Hello, Clv10.
    Thank you for the question.  The steps in the article below may help you resolve the issue with push notifications. 
    iPad and iPod touch: Unable to use YouTube or Push notifications
    http://support.apple.com/kb/ts3305
    Cheers,
    Jason H. 

  • How can I get my sound notifications to work?  They used to but have stopped.  I get the banner alerts.  I have checked in Settings - Sound and the volume is at max.  Help please.

    For some reason the sound notifications on my iPad mini have stopped.  I still get banner alerts but that is it.  I have checked Settings - Sounds and the ringer and alerts setting is at max.  I have updated the IOS system.  Not sure what else to do.

    Unlock can be done only by original Carrier. You should get
    this straightened out before leaving Canada. Warranty on your
    iPhone is not international - if you need any repair or replacement,
    you will have to return iPhone to Canada for this to be done.

  • How to search and replace a string in Excel Shape (textbox) using Powershell.

    I have been asked to write a PS script to search/replace a string when found in Excel Shapes when they are textboxes. I have seen lots of simplistic PS scripts and even I can do a "foreach" loop through all the Shapes on a Sheet and display the
    Name of each Shape. But I have not found a property or method to expose the actual text in a textbox let alone change it.
    I have seen vba script that does this as:  
    Set xWs = Application.ActiveWorkbook.Worksheets(I)
    For Each shp In xWs.Shapes
    xValue = shp.TextFrame.Characters.Text
    shp.TextFrame.Characters.Text = VBA.Replace(xValue, xFindStr, xReplace, 1)
    Next
    In Powershell, shp.TextFrame.Characters.Text is ignored and returns nothing.  It would be nice to know if this is possible in PS and if so, know how to do it and/or get an example to work from.  I would have thought that
    PS and VB would use the same Excel object model but apparently they do not.
    I am using Excel 14.0 and PS 3.
    Any suggestions would be appreciated,
    Michael

    This didn't work for me.  I have the shape object and it shows the textframe property:
    PS C:\> $shape | gm
       TypeName: System.__ComObject#{00024439-0000-0000-c000-000000000046}
    Name                       MemberType Definition
    Apply                      Method     void Apply ()
    CanvasCropBottom           Method     void CanvasCropBottom (float)
    SoftEdge                   Property   SoftEdgeFormat SoftEdge () {get}
    TextEffect                 Property   TextEffectFormat TextEffect () {get}
    TextFrame                  Property   TextFrame TextFrame () {get}
    TextFrame2                 Property   TextFrame2 TextFrame2 () {get}
    ThreeD                     Property   ThreeDFormat ThreeD () {get}
    But trying to access it gives an error:
    PS C:\> $shape.textframe | gm
    gm : You must specify an object for the Get-Member cmdlet.
    At line:1 char:20
    + $shape.textframe | gm
    +                    ~~
        + CategoryInfo          : CloseError: (:) [Get-Member], InvalidOperationException
        + FullyQualifiedErrorId : NoObjectInGetMember,Microsoft.PowerShell.Commands.GetMemberCommand
    PS C:\> $shape.TextFrame.Characters().text="hello"
    You cannot call a method on a null-valued expression.
    At line:1 char:1
    + $shape.TextFrame.Characters().text="hello"
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : InvalidOperation: (:) [], RuntimeException
        + FullyQualifiedErrorId : InvokeMethodOnNull
    I hope this post has helped!

  • How to give readonly Permission rights to 1000 users with button using powershell script?

    $site = Get-SPSite
    -Identity "http://mysite/"
    $user = Get-SPUser
    -Identity "mydomain\myuser"
    -Web $site.RootWeb
    $assignment = New-Object
    Microsoft.SharePoint.SPRoleAssignment($user)
    $role = $site.RootWeb.RoleDefinitions[[Microsoft.SharePoint.SPRoleType]::Reader]
    $assignment.RoleDefinitionBindings.Add($role);
    foreach ($web in $site.AllWebs)
        if ($web.HasUniquePerm)
            $web.RoleAssignments.Add($assignment)
    With above script I can give Readonly permission to the users...but at a time I can give permission to only one user...Actually 1000 users requires these permissionMy requirement is I will have a textbox and a button.I will enter username in textbox
    and when i clicked button the required permission should be assigned to the user given in the textbox...can you please tell how can i achieve this........how make to run powershell script when button is clicked.

    Hello,
    Instead of applying security to user level, it'll be better to create a SharePoint group where you will add the users. and use the outof the box interface to give permissions.
    and for your button, just add the direct link to add user
    http://serverurl/_layouts/15/aclinv.aspx?GroupId=7&IsDlg=1 
    replacing the group ID by the id of your new group (you can see it in the url when your are in the group)
    Best regards, Christopher.
    Blog |
    Mail
    Please remember to click "Mark As Answer" if a post solves your problem or
    "Vote As Helpful" if it was useful.
    Why mark as answer?

  • How to set IPaddress to a VM which has Linux OS using powershell remoting.

    I have downloaded the SetLinuxVM scripts for setting the ipaddress of virtual machine which has Linux as OS. I have 2 different Hyperv host machines for Eg: HostServer1 and HostServer2  and I have installed SetLinuxVM scripts on server HostServer1 but
    my LinuxVM is created in HostServer2 and is highly available.
    Now I have development server from where I connect to any of these HyperV servers remotely .
    I have created powershell remote session from my development server to HostServer1 where SetLinuxVM scripts are installed and excuting the script as given below.
    Set-LinuxVM -VMName "TestLinuxVM" -Manager "Hyper-V" -VMHost "HostServer2"
    -Username "root" -Password "Gen#123" -Hostname "TestLinuxSrv " -IPAddress "192.168.2.2" -SubnetMask "255.255.0.0" -GatewayAddress "192.168.2.1" -PrimaryDNSAddress "8.8.8.8" 
    Even though I am providing the -VMHost and even if the VM is in cluster its not executing the scripts and I am getting the error  WMI not available.
    Its working fine if the scripts are installed on HostServer2 where the LinuxVM is created but my question is that do we need to install the scripts on all HyperV hosts then whats the use of the above parameter -VMHost "HostServer2"  because if
    the hyperv host is remotely connected using powershell we need to provide the VMHost name in the above scripts.
    From the examples provided in the SetLinuxVM module my understanding is that if the SetLinuxVM module is installed in any of the Hyperv servers which  are in a cluster and even though the VM is created in any of the servers and is highly available by just
    providing the VMHost for that particular VM we can set the IPadress ,hostname etc by connecting remotely using powershell to the HostServer which has SetLinuxVM module by providing the VMHost name in the above script .
     Hoping that my problem will be resolved at your earliest convenience.
    Thanks in advance,
    Fayaz Syed.
    FayazSyed

    I am not familiar with these scripts, but in general any modules must exist on the target Hyper-V server.
    The commands do not appear to be suing SCVMM, in which case you would execute the PowerShell script at the VMM console machine.
    Brian Ehlert
    http://ITProctology.blogspot.com
    Learn. Apply. Repeat.

  • How can I capture delete user event in Active Directory 2008 using Powershell command

    Hi,
    In my Active Directory every user have own home drive in the file server. When I delete user I also need to delete folder from the server. 
    My target is make the process automated, so that when I delete user account form AD, the folder associate with user also delete.
    Can I write any power shell script to grep the delete event  and remove folder from file server.
    Thanks
    Tamim Khan

    You can setup event viewer to provide alerts (email alerts) for event id 630.
    Find an existing Event ID 630 entry, right click on it and "Attach Task To This Event...."
    Follow the wizard.
    ** Event ID Sample **
    Event ID: 630
    Type: Success Audit
    Description: User Account Deleted:
    Target Account Name: %1 Target Domain: %2
    Target Account ID: %3 Caller User Name: %4
    Caller Domain: %5 Caller Logon ID: %6
    Privileges: %7
    - Chris Ream -
    **Remember, if you find a post that is helpful, or is the answer, please mark it appropriately.**

  • How do I send message to an iphone in UK?

    How do I send message to an iphone in UK?

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    iOS: FaceTime is 'Unable to verify email because it is in use'
    http://support.apple.com/kb/TS3510
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
    http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
    Set Up Alert Sounds
    http://www.quepublishing.com/articles/article.aspx?p=1873027&seqNum=3
    Extra FaceTime IDs
    http://tinyurl.com/k683gr4
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Troubleshooting iMessage Issues: Some Useful Tips You Should Try
    http://www.igeeksblog.com/troubleshooting-imessage-issues/
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Fix Can’t Sign Into FaceTime or iMessage iOS 7
    http://ipadtutr.com/fix-login-facetime-imessage-ios-7/
    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    http://support.apple.com/kb/TS3970
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    How to Block Someone on FaceTime
    http://www.ehow.com/how_10033185_block-someone-facetime.html
    My Facetime Doesn't Ring
    https://discussions.apple.com/message/19087457#19087457
    How to watch FaceTime calls on the big screen with Apple TV
    http://www.imore.com/daily-tip-ios-5-airplay-mirroring-facetime
    Send an iMessage as a Text Message Instead with a Quick Tap & Hold
    http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
    To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
    How to Send SMS from iPad
    http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
    How to Receive SMS Messages on an iPad
    http://yourbusiness.azcentral.com/receive-sms-messages-ipad-16776.html
    Apps for Texting http://appadvice.com/appguides/show/apps-for-texting
    You can check the status of the FaceTime/iMessage servers at this link.
    http://www.apple.com/support/systemstatus/
     Cheers, Tom

  • How to set volume using Powershell script?

    I would like to know on how to set volume under Window 7 Home 64 bits system using Powershell script.
    Such as 8000 levels as default
    Does anyone have any suggestions?
    Thanks in advance for any suggestions
    Thanks in advance for any suggestions

    Try this.
    Function Set-SpeakerVolume{
    Param (
    [switch]$min,
    [switch]$max,
    [int]$Percent
    $wshShell = new-object -com wscript.shell
    If ($min){
    1..50 | % {$wshShell.SendKeys([char]174)}
    ElseIf ($max){
    1..50 | % {$wshShell.SendKeys([char]175)}
    elseif($Percent){
    1..50 | % {$wshShell.SendKeys([char]174)}
    1..($Percent/2) |% {$wshShell.SendKeys([char]175)}
    Else{
    $wshShell.SendKeys([char]173)
    This works in Windows 8.1.
    Stolen / Modified from
    http://blogs.technet.com/b/heyscriptingguy/archive/2013/07/28/weekend-scripter-cheesy-script-to-set-speaker-volume.aspx, which took me 20 seconds of (apparently) lucky searching.
    Karl
    When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
    My Blog: Unlock PowerShell
    My Book:
    Windows PowerShell 2.0 Bible
    My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

  • How to content migrate from e-room to sharepoint using powershell

    Hi,
    How to  do content migration from e-room to share-point using powershell.
    Please give step by step process and give some idea about migration using powershell and other tools.
     Thanks,
    inguru

    Hi,
    There is no direct content database migration approach from eRoom to SharePoint.
     However many third party tools such as Metalogix, Tzunami, and AvePoint are available to migrate eRoom content to SharePoint as well as you can write your own utility
    to migrate content since there are various eRoom API available for the same.
    Thank You, Somnath Matere

  • How do I get the "message not sent" icon off my notifications?

    I keep getting the "message not sent" icon even when I haven't sent a message or when I have sent a message and it did send.

        MeganLNelson
    Great question! This is normal and is not going to mess up your phone. This helps your phone clear any unnecessary data being used. What I would recommend is performing a back up using our Verizon cloud to keep all your information safe http://vz.to/1C5umDG .
    JorgeO_VZW
    Follow us on Twitter @VZWSupport

  • Why every time i hit my new message or iMessage notification it goes and creates a new message to the person who sent the message

    why every time i hit my new message or iMessage notification it goes and creates a new message to the person who sent the message?

    Hey Rkbethel
    There are two ways to resolve this for you. For the first is go and do a Reset All Settings by going to Settings > General > Reset > Reset All Settings. It will not delete anything on your iPhone, but it will put all settings back to default. If it does not work, the next step would be to restore the iPhone back to factory settings.
    iTunes: Restoring iOS software
    http://support.apple.com/kb/ht1414
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • How to send a message to a Facebook friend from shortcut of messages in notification center

    i tried to send a message to a facebook friend from the shortcut of messages like facebook post or twitter tweat option in notification center but i couldn't i thought there may be something else which i need to do before sending a message to anyone from facebook is there something i need to get done before i can a message to a facebook friend ???

    Hi,
    I take it you have a Jabber account set up in Messages ?
    A Google Mail ID can access Google talk which is a Jabber Server and if you have Enabled "Chat" at Facebook you will have a Facebook chat ID that can be used in Messages as they too run a Jabber server.
    Of course these are just two of many Jabber and compatible XMPP servers.
    I don't have Facebook or Twitter but I did use the Menu bar icon for Notifications  and clicked Messages and Sent a Messages to one of my Jabber IDs (it logged me in and sent it from my Google one).
    In the System Preferences > Notifications I do have Share Button set (Messages only).
    9:04 pm      Saturday; May 10, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

Maybe you are looking for