How to separate two thumbnail images that open same picture?

Just when I think I have some code figured out I cannot for the life of me figure this out...
Ok the fourth page of the website is a portfolio page with 16 thumbnails (4 across 4 down) which opens a larger pic on the same page to the right.
I can't figure out what to change. The first and third thumb down seem to be linked and open the same image. Same with two and two down from that and so on. I want to separate them so each open their own image. If I edit it in PS both thumbs change...
I click several times and well thumb one and the third one down is:
onClipEvent (load) {
   i = 1;
Button around each thumb:
on (rollOver) {
    gotoAndPlay(2);
on (releaseOutside, rollOut) {
    gotoAndPlay(20-_currentframe);
on (release) {
    _root.gal_old.gotoAndStop(_root.gal_new._currentframe);
    _root.gal_new.gotoAndStop(i+1);
    _root.gal_new2.gotoAndStop(i+1);
    _root.gal_all.gotoAndPlay("p1");
Thanks

Not sure what you mean sorry
The only other code I can find is the static image that sits on the right until someone clicks a thumb and can change it
onClipEvent (load) {
_root.gal_new2 = this;

Similar Messages

Photos in album are only a hash-marked outline the image only shows when scrolling how can I see the image and open the photo?

Photos in iPhoto album are only a hash-marked outline the image only shows when scrolling how can I see the image and open the photo?

Make a temporary, backup copy (if you don't already have a backup copy) of the library and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

How do you show thumbnail images for the contacts?

How do you show thumbnail images for the contacts on the iPod?
-Thank You

In another thread I posted a suggestion to try when the iPhoto app in the Application folder will not work:
after upgrading the OS, iPhotos (and Aperture for that matter) should still be in the Applications folder...
And running well in 10.10.3.
If it stops running in a next "update" do not throw it away: most apps will continue running as follows:
In the Applications folder "rightclick" (CTL+click) the iPhoto app, then "show package contents", then click the MacOs folder open: you see the real app (dark grey), rightclick this and choose "make alias", an alias is made, move this alias to the Applications folder and use it to run iPhoto.
Same for Aperture.
In older OS this survived several upgrades....
Lex

How to separate two contact with same name

Hi, anyone knows how to separate two contacts with same name in Contacts? Actually they are two persons from two gmail contacts with same name but different contact numbers, different emails....etc, but Contacts assume they are same person and merge them as one!

FG,
In Lion, you have the File > Duplicate option. You will then have two copies of your document open, and the one on top will have the temporary filename "OriginalFileName copy", and your next responsibility is to File > Save (or Command-S) and rename the duplicate. At this point, you edit the copy's name, to perhaps ...copy 1, or whatever you wish. The document you had open when you initiated the File > Duplicate will still be there on your screen, waiting for you to Close it or continue editing.
Jerry

I am using an Macbook pro in conjunction with a Time Capsule. I back up all my aperture librarys on it, but how can i view these images that are stored on the capsule please ??

I am using an Macbook pro in conjunction with a Time Capsule. I back up all my aperture librarys on it, but how can i view these images that are stored on the capsule please ??

If you want to see what is in a file that is backed up by time machine then you have to restore the entire file. Having said that I have had good experience with Time Machine and individual files... if the file is there then all of it's components are almost for sure there. A way to get around this in Aperture would be to use referenced images. The images then still exist as individual files and can be backed up and restored individually. You would have to do so on a file by file basis though and your album information would still only be saved within the Aperture library.

How to hide xmp thumbnail images?

Is there a way to hide all of the xmp thumbnail images that appear next to the photo image thumbnails? It makes it harder to browse. Thanks!!

What are you talking about? What version? Have you properly set the View menu not to show hidden or invisible files?

How to display multiple thumbnail images in jframe

hi
please help me about how to display multiple thumbnail images in jframe

Multi post:
http://forum.java.sun.com/thread.jspa?threadID=627253&messageID=3588990

How can I force an image to open fully on screen within action?

In PS CS5 when I open an image with height dimension in range of 1405-1411 or 1873-1882, the image opens half off the bottom of the screen. Width does opt seem to matter.
I assume this is a bug, but until fixed I am trying to work around.
For manual editing the vertical fit screen button or zooming out causes the image to come on screen, but is neither of these display options will record in an action.
When an image is opened half off screen, a Place command does not place accurately for these images. Thus an action that includes a Place does not run correctly for these images.
So either I want to find a setting (nothing in preferences that I can find) to force the image to open on screen, or find a command that will run in an action that causes image to come on screen, while not interefering with images that open normally.

The insert menu item command, which I had overlooked (perhaps because it is grayed out to virtual invisibility until action is actively recording), solved the problem.
Thanks.
FYI I had tried all the screen mode options. Made no difference.
Also FYI a screenshot. A little less than 1/2 of the image is off screen

How do I add/delete programs that open on startup?

how do I add/delete programs that open on startup?

Also, Lion starts any open apps on a restart or boot automatically unless you uncheck this option when shutting down.

On CS5, how can I recover jpeg images that were Batch Renamed prior to removal from my flashcard?

On CS5, how can you recover JPEG images that were accidentally Batch Renamed prior to removal from a flash card? Is it a total lose or can they be saved somehow?

If they were renamed on the flash card that is a poor practice. If renamed in Bridge the old names can be recovered it you have checked "preserve original name in XMP". If not you are out of luck. But you still have the images correct?

How do I delete an image that is saying "can't delete"?

How do I delete an image that is not letting me delete?

Thank you for replying, I just tried that a few times and no go... ugh! It pops up a window saying, " The item "....jpg" can't be moved to the Trash because it can't be deleted." Then it just gives me an ok button option.

When I open (launch) ps6, two old images always open. always the same 2 images, and always when I launch the program. what is going on?

when I open (launch) ps6, two old images always open. always the same 2 images, and always when I launch the program. what is going on?

Check your userid autorecovery folder after you close Photoshop. If there are psb files in it delete them

How to merge two different images in photoshop?

I am new here. I am starting to learn photoshop.How to merge two different images in photoshop? Please guide me. Thankyou.
http://www.nissiinfotech.com/

SPAM

How to finish with the sites that open aleatory on safari

how to finish with the sites that open aleatory on safari?

There is no need to download anything to solve this problem. You may have installed the "VSearch" trojan, perhaps under a different name. Remove it as follows.
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Step 1
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Reset the home page and default search engine in all the browsers, if it was changed.
Step 2
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
/Library/LaunchDaemons/Jack.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/Library/PrivilegedHelperTools/Jack
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
This trojan is distributed on illegal websites that traffic in pirated content. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that this Internet criminal has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

When I try to same an image under the command 'save as' it will only let me save as file types 'firefox document' or 'all files' and when I try to look at them later they dont work. How can I save an image as the same file type it is on the web site?!

When I try to save an image under the command 'save as' it will only let me save as file types 'firefox document' or 'all files' and when I try to look at them later they dont work. How can I save an image as the same file type it is on the web site?!
== This happened ==
Every time Firefox opened
== I updated to one of the firefox versions (Not sure which one it was)

Thanks Alex, but sadly I already tried that. Neither .docx or .xlsx files show up in the content list. They both show as a Chrome HTML document so changing how Firefox addresses those doesn't help since it thinks its the same type of file. I don't think I can manually add files into the "Content Type" left side nav.

How to separate two thumbnail images that open same picture?

Similar Messages

Maybe you are looking for