How to set a field from an assigment block as required for a BP creation

Hi,
I have the following requirement.
On employee master data creation, I want to make field System user mandatory in Employee creation.
Iam using Component: BP_EMPL View: BP_EMPL/EmployeeDetails
It happens that this field is inside an assignment block (BP DATA, view: InternetUser).
By screen configuration I am not able to set it as a mandatory assignment block or as a mandatory field inside the assignment block. Is there any way to solve this by configuration?
In case of development is better to use an ABAP exit on save moment or is there any option using BSP development?
Thanks.
Susana Messias

Hi Susana!
Please see also these posts related to your issue:
[Different fields depending of BP Role or any other field|Different fields depending of BP Role or any other field]
Here some relevant notes:
Note 1259940 - Authority check for accounts depending on roles
Note 1260695 - Data set-specific screen control
Note 1097651 - How to use the Account Life Cycle
Note 999092 - CRM WebClient: Field & screen modification
Best regards
Arno

Similar Messages

How to make a field from display mode to change mode for a perticular tcode

hi all,
my client want to change one field which is in display mode of a material doc in mb02.
Restrictions in some fields in MIGO needs to be changed.
Uploading point in case of issue: While editing the MIGO latter, this field needs to be edited.
Goods recipient in case of receipt: While editing the MIGO latter, this field needs to be edited.

hi thanks for quick replay,
my requirement is, supose i post a material doc through migo in 101 mtype, in item detail, where tab i have given the good reciepitant and unloading point. but while i want to change that material doc in mb02, i saw unloading point is in change mode, but good reciepitant field is in display mode. my client requirement is to change that field. so for change that field, the field should be in change mode, so thats what i want.
i have checked in configuration side, but i didnt get any setting, i think we have to customize that standard screen.
any comments?
regards,
susanta
Edited by: susanta bindhani on Jun 19, 2008 2:18 PM

How to set Character field's Format Mask?

dear all,
how to set Character field's Format Mask?
i searched the forum and found the following, where can i use this code and how to change and set its format mask.
SRW.SET_FORMAT_MASK('mask');
Thanks
Muhammad Nadeem

Nadeem,
If you have database 10g, look into function REGEXP_REPLACE. Otherwise you can also try this (you might already know).
SELECT SUBSTR('CHHOCMIPO07020001', 1,2)||'-'||SUBSTR('CHHOCMIPO07020001' ,3,2)||'-'||
SUBSTR('CHHOCMIPO07020001' , 5,2)||'-'||SUBSTR('CHHOCMIPO07020001' , 7,3)||'-'||
SUBSTR('CHHOCMIPO07020001' , 10,2)||'-'||SUBSTR('CHHOCMIPO07020001' , 12,2)||'-'||
SUBSTR('CHHOCMIPO07020001' , 14,4)
FROM dual
CH-HO-CM-IPO-07-02-0001
If you have to use this at many places, create a function, pass the raw value, manipulate the string and return.
FS

How to set the field non-editable in the classical report..

Hi..
How to set the field non-editable in the classical report..

Hi experts,
For the component 'ICCMP_EMP_SRCH' there is a view 'BUPAEMPSEARCH' , which has 2 context nodes 'CUSTOMER' AND 'SEARCHEMPLOYEE' , i need to add the field 'NICKNAME' which is part of the 'CUSTOMER' context node on the search screen. Currrently all the fields on the screen screen are from the 'SEARCHEMPLOYEE' context node. when i did the configuration , the 'NICKNAME' field is greyed out . I have already generated the Getter ,Setter , GET_I, GET_M methods for the 'NICKNAME' field and the context node and controller class and context class are all active .
on debugging the GET_I method, i see that rv_disabled = 'TRUE' and the current = collection_wrapper->get_current( ) is returning empty value .
for this rv_disabled to be set false , the code below is not triggered since there is no value in current.
IF current->is_property_readonly(
'NICKNAME' ) = abap_false. "#EC NOTEXT
rv_disabled = 'FALSE'.
ENDIF.
when i check for other search fields of context node 'SEARCHEMPLOYEE' , all the fields are set to rv_disabled = 'FALSE'.
can anyone suggest how to approch this. iam i missing any binding between context nodes or any activations ?
The field properties are set as Input field and the display checkbox is not checked.

How to set key fields in a Database view

Hi guru's
iam balaji,plz guide me with how to set key fields in a view.......that field is a non key field in the base table....
thanks in advance,
Balaji.S

take a look at this:
Diagnosis
    In the view, not all of the mandatory fields were included as key
    fields. The key of the view therefore is not unique.
System Response
    All the fields are regarded as key fields in order to guarantee that th
    key lengths are unique.
Procedure
    For views with a large number of fields, this could have a negative
    effect on the performance for the language construction described below
    In this case, all the mandatory key fields should be included in the
    view.
regards

How to hide a field from table maintenance view?

Hi,
How to hide a field from table maintenance view?
The field is used for data created date. I need to hide it from display.
Thanks

Chk this link.
http://help.sap.com/saphelp_nw04/helpdata/en/66/33f52010dd11d6999300508b5d5211/frameset.htm
Maintenance Attributes
You can assign a maintenance attribute P to individual fields in the maintenance view definition in the Dictionary (SE11). It can be H (hidden)
H (hidden)
A field flagged H is not displayed on the screen. This field must also be filled in the background by a routine at an event.
The system writes R and H fields to the database like all other fields when a new data record is saved.

How to set a language from LTR to RTL in illustrator cs4

how to set a language from LTR to RTL in illustrator cs4.....plz help

Mac or PC
In either case the language has to be selected on the Mac go to the SystemPreference and language and text and select arabic as the language etc.
That should do it.
Oh, yes just in case you have to also select and arabic type face and it helps if you have a ME computer.

TS4006 how to set a tracking from the computer if someone stolen the ipod

how to set a tracking from the computer if someone stolen the ipod

Welcome to the Apple Community.
You can only locate your device when it is logged into iCloud and 'Find My Phone' is enabled, additionally the device will need to be switched on and connected to a wifi or cellular network.
Unfortunately, you cannot activate iCloud or 'Find My Phone' remotely.

How to set the field SKB1-FDLEV as requestred-entry in G/L Master data?

Hi All,
Could anyone tell me how to set the field SKB1-FDLEV as requestred-entry in G/L Master data?
Thanks
Gandalf

hi
Go to OB26
select Your criteria ( create, change or display)
double click on it
again double click on Bank/financial details
there you will find the Planning level make it require entry
save
with regards
ramanuja chary

How to set up printer from ipad?

how to set up printer from ipad?
Johs.

iOS AirPrint Printers http://support.apple.com/kb/HT4356
How to Print from Your iPad: Summary of Printer and Printing Options
http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
Print from iPad / iPhone without AirPrint
http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
How to Enable AirPrint on a Mac and Use Any Printer
http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
 Cheers, Tom

How to set iframe src from java dynammically

Hi,
Iam calling a servlet from jsp and servlet calls the databse query and returns the value,
in my jsp i have ifrme, i want to change the source of iframe from java depends on the result from database , and the result must display on the iframe can any one tell me how to do this

aurelian_cl wrote:
I need to know how to set environment variables from java
I want to set from java for example the environment variable "TestVar" with the value "TestValue"!1) That functionality does not belong in an application. You're trying to set environment variables, which are global across all applications, at either the user level as a whole, or across the entire machine (system level). Or, if you're only trying to set a variable active for the current process, you don't need to do that.
2) Environment variables are not a platform-independent entity, and are thus against the nature of Java.
My gut feel is that you are designing something in a backwards way, so my point is mainly to point that out, not to try to help you solve that particular problem.

How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.

How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.
When Charter Tech goes to your site, have them connect the modem up, but do not connect the modem to your iMAC or MacBook Pro. What you want to do is connect the Airport Extreme to the iMac or MacBook Pro first with the Ethernet Cable. You have to do this to configure via Airport Utility to set up the Base Station Name & Base Station Password.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple Tv, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.
WHAT TO DO IF YOUR AIRPORT EXTREME WAS PREVIOUSLY SET UP FOR USE WITH ANOTHER CARRIERS ROUTER OR MODEM.
NOTE: If you already had your Airport Extreme connected for example, I previously had ATT Uverse and the Airport Extreme was connected to the Wireless Router Model 3801HGV, I disabled the Uverse Wireless and used the Airport Extreme for the Wireless signal in bridge mode, as the Airport extreme Signal is much stronger than the Uverse router, and I was able to obtain a Wireless signal with the Airport Extreme way much better with no signal loss which was very very frustrating with the Uverse router.
Anyhow if you had it hooked up like this, now that you will be using it with the Charter ARRIS Modem TM902A, you will need to reset the Airport Extreme to clear out the old data it has in memory, with the previous set up otherwise it will not work. Trust me I spent 6 hours trying to make it work reading all Apple Support Community questions and answers relating to this type issue/problem others have been having trying to get their set up working. I tried all the tips, and I finally decided just to see if by chance I would be able to connect with someone with Charter Tech support who might be familiar with Apple to be able to assist me and by luck I did. He told me why it was not working and was all due the previous configuration with the ATT Uverse router was still in memory with the Airport Extreme. Finally it was 10:30 PM when I decided to call Charter Tech Support and I had been working on this since 3:00 pm pacific. I did not call them earlier as all the post I read said they never received any good help from Charter. After calling them I finished up by 11:00 PM and was able to finally connect Apple Tv, iMac, iPhones and Macbook Pro. We love our Apple Product and Happy all is connected with the new
Internet Provider Charter. I must say the speed is way way much better than it ever was with AT&T Uverse.
THIS IS WHAT YOU WILL NEED TO DO:
First you will need to unplug the Airport Extreme, then by taking the tip of a pen or paper clip end you need to push the reset button on the back of the Airport Extreme and hold it
down and at the same time plug the power cord back into the Airport Extreme count to 5 or 10 then release the reset button. Then once he light in front of the Airport Extreme stops blinking you need to plug the Ethernet cable from the Airport Extreme to your iMAC or Macbook Pro, and restart which ever one you have, then open the Airport Utility once it is back up. If you see airport extreme pop up with the old network name or it shows and yellow triangle click on the Airport Extreme ICON it will not let you configure it but will ask if you want to get rid of it or remove and just do it. Then Again restart your iMAC or MacBook Pro, open up Airport Utility again, and on the top left you should see under “Other Airport Base Stations” the MAC ID for the Airport Extreme.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple TV, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.

I just got a Charter Modem. Model TM822. While I was moving, my Airport Extreme was still at my old place.
I have a Linksys WRT320N I used for the initial Charter setup.
I can get my Airport to work here, but the Internet light on the Modem flashes Yellow.
Hasn't caused any issues so far but one thing I did notice.
On the Linksys there were 3 DNS servers listed.
The Airport Extreme only lists 2 and i don't see where I could add another, only change whats already there.
I tried everything above, but light on modem still flashes yellow.
I have the technicians cell phone. Told me "that shouldn't be" and gave the same advice listed above.
I'll break down and call Charter one day, see if it's on their end. NSA tracking may need a reset LMAO.

Strange Case..!! How 2 set an item as a master block to it's db items block

Hello All,
i have a question pls.
================
How 2 set an item as a master block to it's related db items in the same data block; as follows:
============
1-i have to enter the item's value ('LAB_TEMP' ) once then;
2-the other related items in the same data block r changed record each time i navigate to the next record but this item is never changed in this case only if i re-entered another value as (master-detailed rel.). i tried to copy the value of this item to a display item called 'Temp' but it is changing according to the records frequency by default
===========================================================
I tried the following code on when-new-record-instance & on post-changed Triggers as follows:
============================================================
IF :LAB_TEMP IS NOT NULL THEN
SET_ITEM_PROPERTY ('LAB_TEMP',ENABLED,PROPERTY_FALSE);
SET_ITEM_PROPERTY ('LAB_TEMP',NAVIGABLE,PROPERTY_FALSE);
SET_ITEM_PROPERTY ('TEMP',VISIBLE,PROPERTY_TRUE);
SET_ITEM_PROPERTY ('LAB_TEMP',VISIBLE,PROPERTY_FALSE);
:TEMP := :LAB_TEMP;
ELSE
SET_ITEM_PROPERTY ('LAB_TEMP',ENABLED,PROPERTY_TRUE);
SET_ITEM_PROPERTY ('LAB_TEMP',NAVIGABLE,PROPERTY_TRUE);
SET_ITEM_PROPERTY ('TEMP',VISIBLE,PROPERTY_FALSE);
SET_ITEM_PROPERTY ('LAB_TEMP',VISIBLE,PROPERTY_TRUE);
:TEMP := :LAB_TEMP;
END IF;
============================================================
even this generates unable to set enable property or visible prop. error
====================================================
Someone help me with this pls.??
========================
Thanks in advance,
Regards,
Abdetu..

Hello everyone,
This issue was solved as:
==================
1-i created a separate db block
2-created a text item called 'TEMP' with db=NO
3-In the db block that i want to deal with it as:Master item to it's other related detailed items to that item which is called 'LAB_TEMP' ;
* Copy value from property: TEMP.
By this way i could entered a value i the ndb item called TEMP once & consequently this value is entered copyed 4 each new record i entered.
This is an intial solution works fine at least 4 now, a Fried helped me with this i would like 2 share this info 2 others may be a new idea would help...
Thanks always,
Abdetu..

How do I transfer photos from iPad mini to SD card for backup?

How do I transfer photos from iPad mini to Sd card for backup?

You can copy photos from Camera Roll to a wireless flash drive (Micro SD Card)
http://www.sandisk.com/products/wireless/flash-drive/

I would like to know how can I delete emails from my email block have more than 8000? Thank you.

I would like to know how can I delete emails from my email block have more than 8000? Thank you.

I want to say, delete the 8000 not one by one, or 50 in 50... Minimum of 200 by
200

How to set a field from an assigment block as required for a BP creation

Similar Messages

Maybe you are looking for