How to set a page item to either of two sources?

Hello Folks,
I would like some advice with the following:
On P1 there is a text field, say p1_text. The users enters a value into p1_text. This is validated.
If the p1_text value validates OK, and the next button is pressed, there is a branch to page 2, which has a sql query page item named p2_dest which should use :p1_text in a where clause.
If the p1_text value does not validate OK, the user is then presented with a Select List named p1_select (p1_text is now hidden). When the next button is pressed, there is a branch to page 2, and the sql query page item, p2_dest should now use :p1_select in a where clause (instead of :p1_text).
I have the validation and presentation of either p1_text or p1_select working OK, but would really appreciate suggestions on how to set the one item on page 2 with either of the page 1 items when the branching occurs.
Thanks
KIM

I used pl/sql in a page process on P2 to implement this logic to set a P2 item. I removed the setting of items from the calling page branch process.
Cheers
KIM

Similar Messages

How to retrieve a page item value in another page?

Hi,
how to retrieve a page item value in another page?
say P55_COURSES_TO_EVALUATE is my page item name and it is a select list.Based on the value selected,in the next page i shd show details related to the selected value and for this i need P55_COURSES_TO_EVALUATE value in the next page.How Do I get it?When I try to retrieve the values it simply returns nothing.
Any pointers would be really helpful.
Thanks in advance.

Hi,
Could you please tell how you try use it ?
If you set value to item P55_COURSES_TO_EVALUATE and submit page, value is saved to session state.
Then you can use that item in any page like
:P55_COURSES_TO_EVALUATEYou can not access page value in javascript/jQuery from other pages like
$v('P55_COURSES_TO_EVALUATE')
document.getElementbyID('P55_COURSES_TO_EVALUATE')
$(#P55_COURSES_TO_EVALUATE)Because item is not in other pages. In javascript from other pages you can use
var a = '&P55_COURSES_TO_EVALUATE.';Regards,
Jari

How to set an Application Item from PL/SQL

I am attempting to set an Application Item
After login to my app, I want to retrieve a row from my SETTINGS table and populate some Application Items with the settings information so that I can
display some of that settings information on every page.
Just to start, I created one Application Item named F106_YEAR
I then created a Shared Components Application Process which executes on New Session: After Authentication
I created this process as an Anynomous PL/SQL block.
declare
aucyr varchar(4);
begin
select year into auctyr
from settings;
:F106_YEAR := aucyr;
end;
I've tried a couple of other Syntax tricks attempting to reference the Application Item F106_YEAR from within PL/SQL (like V('F106_YEAR') but nothing seems to be working.
I'm sure that I am missing something simple. Can someone tell me how to set an Application Item from PL/SQL?
Thanks in advance.

I'm still doing something wrong because this is not working for me.
I've tried both of the following versions as an Application Process set to run on New Session after Authentication:
declare
auction_year varchar(4);
begin
select year into auction_year
from PBUUC.SETTINGS where rownum < 2;
:F106_AUCTION_YEAR:=auction_year;
end;
and I also tried:
declare
auction_year varchar(4);
begin
select year into auction_year
from PBUUC.SETTINGS where rownum < 2;
APEX_UTIL.SET_SESSION_STATE (p_name, p_value);
end;
F106_YEAR is a global Item (shared components).
The select statement works just fine in SQL*PLUS so I know that it is correct.
If I run the debugger and log into the application, here is the output. Shouldn't I see my Application Process get called if it is set to run on New Session after Validation?
My Application process is named RETRIEVE_AUCTION_SETTINGS
0.01: A C C E P T: Request="P101_PASSWORD"
0.01: Metadata: Fetch application definition and shortcuts
0.01: alter session set nls_language="AMERICAN"
0.01: alter session set nls_territory="AMERICA"
0.01: ...NLS: Set Decimal separator="."
0.01: ...NLS: Set NLS Group separator=","
0.01: ...NLS: Set date format="DD-MON-RR"
0.01: ...Setting session time_zone to -04:00
0.01: NLS: wwv_flow.g_flow_language_derived_from=0: wwv_flow.g_browser_language=en-us
0.01: Fetch session state from database
0.02: ...Check session 695371898690095 owner
0.02: ...Check for session expiration:
0.02: ...Metadata: Fetch Page, Computation, Process, and Branch
0.02: Session: Fetch session header information
0.02: ...Metadata: Fetch page attributes for application 106, page 101
0.03: ...Validate item page affinity.
0.03: ...Validate hidden_protected items.
0.03: ...Check authorization security schemes
0.03: Session State: Save form items and p_arg_values
0.03: ...Session State: Save "P101_USERNAME" - saving same value: "jps"
0.03: Processing point: ON_SUBMIT_BEFORE_COMPUTATION
0.03: Branch point: BEFORE_COMPUTATION
0.03: Computation point: AFTER_SUBMIT
0.03: Tabs: Perform Branching for Tab Requests
0.03: Branch point: BEFORE_VALIDATION
0.03: Perform validations:
0.03: Branch point: BEFORE_PROCESSING
0.03: Processing point: AFTER_SUBMIT
0.03: ...Process "Set Username Cookie": PLSQL (AFTER_SUBMIT) begin owa_util.mime_header('text/html', FALSE); owa_cookie.send( name=>'LOGIN_USERNAME_COOKIE', value=>lower(:P101_USERNAME)); exception when others then null; end;
0.04: ...Process "Login": PLSQL (AFTER_SUBMIT) wwv_flow_custom_auth_std.login( P_UNAME => :P101_USERNAME, P_PASSWORD => :P101_PASSWORD, P_SESSION_ID => v('APP_SESSION'), P_FLOW_PAGE => :APP_ID||':1' );
0.06: ...Process "Clear Page(s) Cache": CLEAR_CACHE_FOR_PAGES (AFTER_SUBMIT) 101
0.06: Nulling cache for application "106" page: 101
0.00:
0.00: S H O W: application="106" page="1" workspace="" request="" session="695371898690095"
0.01: alter session set nls_language="AMERICAN"
0.01: alter session set nls_territory="AMERICA"
0.01: ...NLS: Set Decimal separator="."
0.01: ...NLS: Set NLS Group separator=","
0.01: ...NLS: Set date format="DD-MON-RR"
0.01: ...Setting session time_zone to -04:00
0.01: NLS: wwv_flow.g_flow_language_derived_from=0: wwv_flow.g_browser_language=en-us
0.01: Application 106, Authentication: CUSTOM2, Page Template: 2904114531488186
0.01: ...Session ID 695371898690095 can be used
0.01: ...Application session: 695371898690095, user=JPS
0.01: ...Determine if user "JPS" workspace "1040027630222986" can develop application "106" in workspace "1040027630222986"
0.01: ...Check for session expiration:
0.01: Session: Fetch session header information
0.01: ...Metadata: Fetch page attributes for application 106, page 1
0.01: Fetch session state from database
0.02: Branch point: BEFORE_HEADER
0.02: Fetch application meta data
0.02: Computation point: BEFORE_HEADER
0.02: Processing point: BEFORE_HEADER
0.03: Show page template header
0.03: Computation point: AFTER_HEADER
0.03: Processing point: AFTER_HEADER
0.04: Computation point: BEFORE_BOX_BODY
0.04: Processing point: BEFORE_BOX_BODY
0.04: Region: Auction_Title F106_AUCTION_YEAR

Hi, I am using Indesign CS6, How to set the page size in Inches.

Hi, I am using Indesign CS6, How to set the page size in Inches.

All fields in InDesign can be entered in any measurement system. So, if you want to make an 8"x10" document and go to File>New Document and the window looks like this:
…you can type either 8 in or 8" into the Width field like this:
…and when you move to the next field, it will convert the eight inches into the equivalent number in the unit of measure that it is using at the moment, like this:
… (203.2 milimeters is the same as 8 inches). You can also enter a different measurement unit into other fields once the file is created, such as the width or height of a frame, or the position of an object in the X and Y coordinates.
If you would rather just work in inches instead of having to type the inches mark or abbreviation, go to InDesign>Preferences>General and select the Units & Increments tab. There you will see Ruler Units for Horizontal and Vertical at the top of the window. Set them to Inches and all of the fields will display in inches. If you do that to an open document, you will change the unit of measure for that document. If you do it while no documents are open, it will change the unit of measure for any new documents you create. To change the unit of measure for existing documents, you will have to open each and make the change.

How to set background ChoiceBox item color to ChoiceBox with css?

How to set background ChoiceBox item color to ChoiceBox with css?
I need to change items list backgound color.
I tried with following code, but it doesnt helps:
.choice-box .context-menu {
-fx-backgound-color: red;
.choice-box .menu-item{
-fx-background-color: red;

In Java 8, either of your selectors should work.
In Java 7 (JavaFX 2.2), you need the following workaround:
#choice-box-menu-item {
-fx-background-color: red ;

Question - any way to set a Page Item in a worksheet to default to All ?

Well, I seem to have run across an interesting situation here. I have a table worksheet with page items. I have noticed one thing while testing this new worksheet/workbook. If I pick a value for one of the page items (and with page items, it seems I can only pick one value at a time) and then save the worksheet, close the workbook, and then reopen the workbook and run the worksheet, Discoverer has retained the page item value as the value when I saved it, rather than defaulting back to <All>. So I quickly learned a new lesson with this darn Discoverer product - make sure all page items set to the <All> value before I save a worksheet that I am going to want to promote to Production.
Well, now I have run into a situation where based on the conditions I have to set in the workbook, I have a Page Item in the worksheet that today has only 1 value that pulls into the worksheet. When I do the drop down on that Page Item, it only shows the one value. It does not give me the ability to pick the <All> option. So I am unable to save the workbook with the <All> value today for that page item. There are other potential values for this Page Item that could show up in the future.
Now granted if this were to happen, the Viewer user could do the drop down on the page item at that time and pick the <All> value at that time. But alas, since they are not the owner of the workbook, they could only save as a new workbook, with themselves as the owner - cannot change the production workbook so it would be changed going forward. This also means the user has to realize that they are missing data and that the fixed page item value is the cause of that, which I am skeptical that they will be able to figure out. So I really want this page item value to default to <All> when the users open and run this worksheet.
So here is my question - does anyone know of a way to set the Page Item value to be <All> automatically when a worksheet is run?
I hope this makes some sense. Always a challenge to explain an issue well. It took me a bit to realize that when saving a worksheet/workbook, it was retaining the selected page item values when I performed the save. It is also very unusual to have a situation where a page item does not currently have multiple values. So this may be a situation that few people have run across.
John Dickey

Ah, there is a potential workaround, as I have finally figured out. The workaround does require that you have the ability to bring in multiple values for the page item from the worksheet run result set. If you have a situation, like I have, where today you only have one valid value, you will still have a problem.
The workaround is this. Figure out a way to get multiple values into the worksheet run result set. That way when you do the page item drop down list, you will see the <All> value in that list. Pick that value, refresh the worksheet, and save the workbook. Now reset your worksheet back to your desired conditions, where you end up with just one value in the worksheet result set, and refresh the worksheet. The <All> is still retained as the page item default and when you do the drop down list for the page item, you see two values in the list - your 1 valid value plus the <All> value. So once you get that <All> set as the page item default, then it will be retained. This explains how support originally tested (on an existing worksheet) and said they were able to see and pick the <All> value.
Since it should be rare for something to have just one valid value in a worksheet result set, and even rarer to have just one current valid value in Oracle, this workaround should take care of most of the situations where you might encounter this issue. I still will push for an enhancement request to have that <All> value show in the drop down list even when just one value in the worksheet result set.
John Dickey

How to set the page size

Hi,
How to set the page size of a B tree node in berkeley db java edition?
thanks.

The two systems have different performance characteristics. If you are concerned with the performance characteristics, then the best way to tell is to benchmark them.
By the way, both BDB and BDB JE are B-trees.

How to remove the Page Item in thin Bean JSP

Hi, I'm wondering how to remove the Page Item in JSP developed by BIBeans, since I have tried to remove the Presentation's Page Item in BiBeans Catalog, but with no result in JSP. Thank you!
Jeff

There are two ways to do this:
1) If you want to remove and individual dimension from a presentation, you can hide the dimension. This can be performed directly from within QueryBuilder. Within the first section of Query Builder that shows the selected measures selected and associated dimensions, simply remove the required dimensions from the right dialog panel.
2) To hide all page items within a presentation, simply add the following the property, pagingControlVisible="False", to the presentation tag in your JSP. For example:
<orabi:Presentation location="Local Computer Sales/Products/KPI Sales Prior Period and Prior Year" id="BIProductKPIs_pres2" pagingControlVisible="False"/>
Hope this helps
Business Intelligence Beans Product Management Team
Oracle Corporation

How to set default page in DLN among folders structure

Hi All,
We have the navigation structure as follows.
In Top Level Navigation we have a Role called " Role1"
In Second Level Navigation we have a Workset called "Workset1"
In Detailed Navigation we have a folders as below :
Folder1
    Folder2
          Page1
          Page2
          Page3
    Folder3
         Page4
         Page5
         Page6
Now our requirement is when user clicks on Role1 then in the Detailed Navigation (DLN) , Page1 should set by default and content in that page has to be displayed in the content Area.
Currently it is happening like, when user clicks on Role1 then in the Detailed Navigation(DLN), Folder1 is selecting by default , then user has to select manually the page1 then that page1 is content is displaying in the content area.
Could you please get back to me what are the properties has to be changed at page level or folder level if any, for achieving the requirement as page1 should set by default when user clicks on Role1 ( from the First Level Navigation).??
I tried the property of "Default entry for folder" for page1 as "Yes", Still it is setting the page1 as deafult in the DLN on click of Role1. Please let me know if any other properties are required to change?
Note : Currently we are using Light framework page fucntionality instead of Default framework page.
Thanks in advance, it would be great help to us if get back to us.
Regards,
PortalUser100
Edited by: PortalUser100 on Feb 24, 2011 6:53 PM
Edited by: PortalUser100 on Feb 24, 2011 6:54 PM
Edited by: PortalUser100 on Feb 24, 2011 6:57 PM

Hi Mahesh,
Thanks for your reply.
Currently we are using Light framework page not Default Framework Page, Inside we have Light detailed Navigation, inside i had check for the property of "Clicking Folder Name Launches First Node", but it was not there for Light detailed Navigation.And this property is there as you said for detailed navigation inside the desktop inner page.
Could you please guide whether out requirement is possible or not with light framework page->light detailed navigation?
The following is our requirement
How to set a Page as Default which is inside the Folder Structure on DLN (Detailed Level Navigation).?
When user clicks on Role , then we need to set the Page as default to be loading in the detailed Navigation then the content of Page will be automatically displayed in the content area.?
The following is the Structure of our requirement, then please let me know how to set Page as default when we click on Role 1, as mentioned in the below structure. Currently when click on Role1, then Folder1 in the DLN is selecting by default then user has to click on Page manually then content of page will be displayed in the content area.
Role1 (First Level Navigation)
     Workset1(Second Level Navigation)
         Folder1(Deailed Navigation content)
              Folder2
                    Page (Google Page, for example)
I tried the property of Page as "Default Entry for Folder" as "Yes", even though still the page is not setting by default on click of Role1. let me know if any other changes/properties/options are there to get the solution for this.
If any one helps on this then it would be great help to us.
Currently we are using Light Framework Page. Not Default Framework Page.
Thanks in advance.
Regards,
PortalUser100

2 Question How to set the page size and full screen

I am looking to find out how to set the page to be 1024 by
768 static and also how to force a browser window to go to full
screen. Thanks

Hi Ludek,
i could solve the issue by using the follwing code.
report = new ReportDocument();
PageMargins customPageMargin = report.PrintOptions.PageMargins;
report.PrintOptions.PaperOrientation = PaperOrientation.Portrait;
report.PrintOptions.PaperSize = PaperSize.Paper10x14;
customPageMargin.rightMargin = 1;
customPageMargin.topMargin = 0;
customPageMargin.bottomMargin = 0;
report.PrintOptions.ApplyPageMargins(customPageMargin);
Thanks for you help.
Regards,
smitha.

How to Set a page as home page in Oracle portal 10g

Hi,
I have one doubt.
How to set a page (Not Page group) as home page in Oracle portal 10g?
whether it should be a HTML Portlet or some other?
Thanks & Regards
Suthan.Sathya

Hi,
Welcome to SDN
By defining the Sort Sequence of Navigation Nodes, you can do this, check the links:
http://help.sap.com/saphelp_nw2004s/helpdata/en/92/3e703e632c7937e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/53/89503ede925441e10000000a114084/frameset.htm
If you need more help, just ping back.
Greetings,
Praveen Gudapati
p.s. Points are always welcome for helpful answers

How To Access PAGE ITEM (single row) from HTML source

Hi Guys,
I have a page Item that return a string.
I would like to show this string
How To Access PAGE ITEM (single row) from HTML source?
My desire final output is
<marquee>:P1_PAGE_ITEM</marquee>
Can please help me
Thanks

Hi,
You can refer the page items in your page header as &itemname. For example, if I have page item P15_TEST, I will add the following in header:
<marquee>
&P15_TEST.
</marquee>But make sure that you have a process before header to populate the value in your page item. Otherwise, there will be a null scrolling (which you can't see!) :)
Regards,
Zahid

I cannot figure out how to set my apple id to use: itunes (two of accounts), apps store and Itunes store. How do I make one password that will be recognixed by all these devices?

I cannot figure out how to set my apple id to use: itunes (two of accounts), apps store and itunes store. How do I make one password that will be recognized by all these devices? My apple id is constantly not working.

Hi Lrwill,
If the apps that are on your son's iPad were purchased under his Dad's Apple ID, then signing your Apple ID onto the iPad will not help you with updating those apps.
Also, if the iPad was sync'd with his Dad's iTunes library, then hooking it up to your computer/iTunes library, will require you to reset the iPad, and everything that was loaded under the other Library and Apple ID will be wiped out.
Can you provide a little more info about what was set up under which Apple ID and what iTunes library the iPad was sync'd with?
Cheers,
GB

How to set a page template for news detailed view?

Is there a way to set a page template for the detailed view of the news module?
I have a page template setup and added the {module_announcement,,,,,} to the page. When the news item is clicked it always opens the default template - is this how it is designed to work or is there a way I can specify it to use a different page template?
Dave.

Hey Dave, See the image below:

How to set Document Library Item Limit at Site Collection level?

Hi,
I have SharePoint which contains one Site collection with many Sites. Each sites has many document library.
Actually my requirement is, End Users wants to see only 10 items per page in document library. We can manually set by using "Item Limit" option but i could not set that for around 150 document libraries.
Is there any possible to set that in Site Collection level?
Thanks & Regards
Poomani Sankaran

You can run for each loop and use below code
http://get-spscripts.com/
#Get the site and list
$web = Get-SPWeb "http://portal/sites/testsite"
$list = $web.GetList(($web.ServerRelativeUrl.TrimEnd("/") + "/Shared Documents"))
#Get the list view to be changed
$newview = $list.Views["Sort by modified date"]
#Set the mobile and default mobile view properties
$newview.MobileView = $true
$newview.MobileDefaultView = $true
#Update the view configuration
$newview.Update()
$web.Dispose()
$web.Lists[0].Views[0].RowLimit=30
$web.Lists[0].Views[0].Update()
How you can get all list using powershell
http://sharepointrelated.com/2011/11/28/get-all-sharepoint-lists-by-using-powershell/
If this helped you resolve your issue, please mark it Answered

How to set a page item to either of two sources?

Similar Messages

Maybe you are looking for