How to set "Created By" field for KD Documents

In our system documents that are entered to the Knowledge Directory are not tagged with who it was that submitted them.
We would like to capture that information but I'm not sure how to enable it (or if its possible).
I've looked at the Global Property Map and don't see a setting for a document, I looked at the Global Document Map but that seems to specifically relay info between the documents meta data and portal properties (which is not what I'm looking to do).
Does anyone know how to attach the portal user in some type of "submitted/created by" field to a document?
Thanks and happy September!

Hello Keshav.T,
Thank you for your information.
Finally, I got an answer from OSS and the following is that.
The popup is shown when there are more than 10 variants exist.
If do not want to have this popup, you can modify the include
LSVARTOP in SE38:
C_VARILIST TYPE I VALUE '10' - maybe change value to '100'
or if you want to have the popup but without the name inside:
change include LSVARE01 and comment the line:
ename-low = sy-uname. append ename. "old
ename-low = sy-uname. append ename. "new
I believe this message might be able to solve my problem.
Thanks again.
BR,
Chris Kim

Similar Messages

How Can we create parameter field for BP Group on Crystal Report

Hi,
I have something wrong:
I want to create parameter field on Crystal report to select multiple cardcode group, I use for that :
@Select * from ocrg
but when I execute the report the fiel don't give any thing to choice BP Group, it is a null fiel ?
Any Idea how can I do this otherwis
Ps: I want to precise group to display it.
Thanks in advance
Cdt
Malika

Hi Malika.....
Try this simple query report in Crystal with Parameter as CardGroup....
Select T0.CardCode, T0.CardName From OCRD T0
Where T0.GroupCode='{?GroupCode@Select * from OCRG}'
Take above query in command window.
GroupCode@Select * from OCRG
Take above condition in parameter window and then try to run in SAP.
You can see how CFL gets generated and you get values of CardGroup......
The above is only example.......
Regards,
Rahul

How do I create a folder for private documents which can be password protected?

how do I create a folder which can be password protected please?

You can do this by creating a protected disk image.
Instructions here http://www.macworld.com/article/154559/2010/10/password_protect_folders.html
Or you can buy and use software like this one: http://www.apimac.com/mac/secretfolder/
The disk image option is free and easy to do.

How do I create a title for a document in Pages?

How do I get a title to show for my documents? When I click on the blank document, then type, it shows up on my document page as "Blank 2" or 3 or 4.... How do I give it a name?

Dear Smith2413,
I had the same annoying problem when starting out with Pages on IOS. As you found help here it would be good to help others.
1. Indicate your question has been successfully answered. Give credit to the person who first gave you the solution. Maybe also indicate that other replies were helpful.
Also, when you joyfully indicate your problem has been solved, answered on another discussion board, indicating what that solution was would be nice, and/or give a link to that other discussion board.
These are some of the 'common practices' on this forum that help us all.

How can I create a form for users wherein the text field will expand to accommodate additional text?

How can I create a form for users wherein the text field will expand to accommodate additional text?

You need to use LiveCycle (PC Only) to create a dynamic form like that.
The best you can do with Acrobat to view all of the text in a field is to set the field to multiline, and set the size to "Auto" (If you don't set the size to 'Auto', you can enter as much text as you wish, but the user will need to use the scrollbar to view all of the text.)

How to set Mandatory Choice field while Creating Custom Task using Sharepoint Designer 2007

Hi,
I am new to Sharepoint development.I dont know whether i am posting the question in Correct place.Kindly redirect me to the correct place if i am posting it in wrong place.
I created a custom task in Sharepoint Designer 2007 using
Collect Data from User
Action.
I created a field in the task form which is of choice type and
unchecked allow blank values
because i wanted that field to be a mandatory field.When i handled that task ,i was able to complete that task
without selecting that mandatory field.But, I was expecting not to allow me to complete the task without selecting that field. Kindly tell me how to set the choice field as mandatory.

Hi,
You are using SharePoint Designer 2007, so I moved the thread to the appropriate forum for MOSS 2007.
This is by design that
Workflow-generated form (for action Collect data from User) does not perform validation properly on drop-down choices, the workaround is to use JavaScript to perform the field validation.
This thread has the JavaScript code can help you:
http://social.msdn.microsoft.com/forums/en-US/sharepointworkflow/thread/0ad7fc3c-97a1-464e-ae89-c3133462dda8/
Xue-Mei Chang

How to set a default value for particular field in SRM PO Portal

Dear Gurus,
Im desparetly need a help in web dynpro on how to set a default value for a field(flag) in PO header tab in portal.
My requirement is whenever the user press the edit button in PO screen,automatically a flag field should be set as abap_false.
I dont think this will handle in check badi or change badi. i tried this part in onbuttonpressed overwriteexit in CNR_VIEW views,i can get the function EDIT in debugging mode,but dont know how to proceed further.....
Many of them suggested to go with get attribute and set attribute for changing any particular field in web dynpro,but im not very familiar in using those get and set attributes.I request you people can give me sample code on how to identify my target field in the node and set the values while pressing EDIT Button.
Thanks in advance...
Regards,
Sathish

Dear Laurent,
Thanks for your response,
But i searched in enhancement spot of WD_BADI, but couldnt get the exact way to change the coding,
My real requirement is, that particular flag should be enable and disable dynamically by checking a condition in my header values.So in that case i dont know how to proceed further to handle in the PO screen.
Kinly guide me how to get the particular node of field in the Purchase order screen.
Thanks you in advance,
Sorry for the inconvenience if any
Regards,
sathish

How to set a new value for formula field in crystal reports xi?

How to set a new value for formula field in crystal reports xi?//formula{@description} exemplo in VB6crxSubreport.FormulaFields.Item(1).Text = "'Subreport Formula'" orcrxSubreport.FormulaFields.Item("description").Text = "'Subreport Formula'"How to in JRC? 

Hi,
This functionality is known to be very important and is a key part of the next major release of the JRC planned for the first half of 2008.
Regards,
Blair Wheadon
Product Manager, Crystal Reports

How to set a date range for date field ?

Dear Experts,
Scenario:
I have a query in validating the date field in my BSP application. My application is for maintain infotype 0023 Other/Previous Employers online by employees in the company.
As per our design we are maintaining the all employment details of the employee both ( with in the current company / previous employment outside the company) in the same infotype.
Every employee will have a hiring date within the SAP HR system. We consider this date as the cutoff date between current and previous employment in our application. When the employee updating the details wia BSP page I need to check the following.
Record inside current company: Validation that, the user should only able to enter BEGIN DATE (BEGDA) greater than or equal HIRING DATE and END DATE(ENDDA) should be greater than FROM DATE (BEGDA).
Record outside current Company: Validation that, the user should only able to enter BEGIN DATE (BEGDA) less than or equal HIRING DATE and END DATE (ENDDA) should be greater than FROM DATE (BEGDA) and less than HIRING DATE.
Technical Requirement:
How to set a date range for date field, i.e. how we can limit the date range in a HTMLB date field? Can this it be achieved via standard functionality of HTMLB?
Following is the code to describe date field in my application.
 <htmlb:inputField id= "ENDDA_NEW_IN"
 type= "date"
 doValidate= "TRUE"
 showHelp= "TRUE"
 disabled= "FALSE"
 width= "183"
 style= "cssTextAreadate"
 value= "<%='99991231'%>"/>
Thanks a lot in advance for your assistance and help.
Cibinu2026
Edited by: cibin kuruvilla on Nov 12, 2008 11:13 AM

Hi,
This functionality is known to be very important and is a key part of the next major release of the JRC planned for the first half of 2008.
Regards,
Blair Wheadon
Product Manager, Crystal Reports

HOW TO SET A DEAFULT VALUE FOR A FIELD?

hi friends
i have doubt..how to set a default value for a field..say like in local printer field i always want lp01 to be displayed defaultly..when i click F1 in that field i get the parameter id ..i know there is something dealt with that parameter id..how can i set that default value ..in the case of the default printer value i made in own data settings as lp01 but how to do it normally for other field which has parameter id ??????
thanks and regards
prince

Hi Prince,
u can set the default value in abap as given below
SELECTION-SCREEN: BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN SKIP 1.
PARAMETERS : S_BUKRS TYPE BSID-BUKRS OBLIGATORY DEFAULT '1000'.
PARAMETERS : S_BELNR TYPE BELNR_D OBLIGATORY DEFAULT '1600000070'.
PARAMETERS : S_GJAHR TYPE GJAHR OBLIGATORY DEFAULT '2008'.
PARAMETERS : ASON TYPE BUDAT OBLIGATORY DEFAULT SY-DATUM.
PARAMETERS : S_KUNNR TYPE KUNNR MODIF ID GP1.
PARAMETERS : S_LIFNR TYPE LIFNR MODIF ID GP2.
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN : END OF BLOCK B1.
or
u can give the default value in INITIALIZATION also.
vlue = '1000'.

How to set a key field in a local provider for BW workspace

Hi Experts,
I've created a local provider through BOBJ analysis for excel / Workspace designer in a BW workspace. However, all the dimensions by default are not having the key field enabled and I'm not able to enable the key field through BW workspace. Also I see the Fact Index Without Key is enabled by default in technical settings, which is not allowing me to select "Fact Index with Key" either. When I go to edit mode, it says "Analytic Index XXX can only be changed in workspace designer". I even tried to go into workspace designer and by selecting the necessary local provider, I coudn't find an option under Local Provider->Reload Provider->Reload (With Changes)->Choose File->Edit Columns to enable the key field(s) for the dimensions.
Can you please help to locate how to enable the key field for dimensions in local provider.
Thank you in advance.
Regards,
Karthik

There's nothing to solve. If Reader (XI only) is used only PDF files can be selected. This is how it's supposed to work (although I agree it's silly and should be changed).

How do I create a field, in which people can click to accept my general business terms?

How do I create a field, in which people can click to accept my general business terms?

I'm not sure what are InDesign's capabilities in this field, but I think
you can do everything there, except for setting up the button field with
the right options and applying the one line of code that allows the user to
import their own images into it.

How to set displayed column width for a search help

I have created an elementary search help for a custom field with a value table behind it.
The search help functions correctly, but when displayed the column widths are all 10 characters. The user has to adjust the column to view the descriptive text.
Can anyone tell me how to set default column widths for the help?

Please open you Elementary search help and see the Column width behind the Fields of your ...there increase the width of the fields
"Activate it and refresh
reward points if it is usefull .....
Girish

Create User-defined field for Marketing Documents

I need to create a User-Defined field for Marketing Documents under Title and Rows.
I need to do it via .NET instead of manually go into SAP to create it.
Does anyone can give me idea on how to do this?

Hi David,
There are examples of how to do this in the SDK samples (look for MetaDataOperations project in the DI samples).
There are also examples in the SDK help. Here's one:
Private Sub AddUserField()
'// The UserFieldsMD represents a meta-data object that allows you
'// to addremove fields from tables or change the fields' characteristics
    Dim oUserFieldsMD As SAPbobsCOM.UserFieldsMD
'// In any meta-data operation there should be no other object "alive"
'// but the meta-data object, otherwise the operation will fail.
'// This restriction is intended to prevent a collisions.
    '// The meta-data object needs to be initialized with a
    '// regular UserFields object
    Set oUserFieldsMD = oCompany.GetBusinessObject(oUserFields)
    '// When adding user tables or fields to the SAP Business One database
    '// use a prefix identifying your partner name space
    '// this will prevent collisions between the various partners add-ons
    '// SAP's name space prefix is "BE_"
    '// Set the Fields' mandatory properties
    oUserFieldsMD.TableName = "OCRD" '// BP table
    oUserFieldsMD.Name = "BE_UserField1"
    oUserFieldsMD.Description = "A user field"
    oUserFieldsMD.Type = db_Alpha '// am alphanumeric type
    oUserFieldsMD.EditSize = 20
    '// Add the field to the table
    oUserFieldsMD.Add
End Sub
Kind Regards,
Owen

How to set up automatic payment for the purchase order

Hi, All,
I have one question how to set up automatically payment for the Rent Office purchase Order?
There is the requirement from the client. They want to create one kind of purchase order for the Office Rent, then pay the fees in the certain time of every month to the vendor for the rent fees without any invoice. Whatu2019s the normal solution for this kind of purchase order? Is it ERS? Or something else?
Please give me the details and business flow. Also please tell me how to setup in the SAP and T-code.
Thanks in advance

Either you can set up ERS or you can pay directly from the FI side.
Prerequisites
Evaluated receipt settlement must be flagged in the purchase order item.
The vendor must be flagged as being subject to ERS in the vendor master record.
The goods receipt must refer to a purchase order.
Goods-receipt-based Invoice Verification must be defined for the purchase order item.
A tax code must have been maintained in the purchase order item.
The order price of the materials may not be an estimated price.
If you flag a vendor as being subject to ERS, the system sets the ERS indicator as a default in each item when you create a purchase order for the vendor. You can prevent this happening for certain vendors by flagging the info record for the material and the vendor as not being subject to ERS.
In Purchasing, you can delete the default ERS indicator in a purchase order item.
Choose Logistics Invoice Verification ® Automatic Settlement ® Evaluated Receipt Settlement (ERS).
The selection screen appears.
You can use the following criteria to narrow down selection of the transactions to be settled:
Company code
Plant
Goods receipt posting date
Goods receipt document
Fiscal year of the goods receipt
Vendor
Purchase order and order item
You can define the selection criteria for the invoice documents by:
Delivery
Purchase order
Purchase order item
Goods receipt document
Credit memo
Invoice
Currency
Choose Execute.
The system issues a log for Evaluated Receipt Settlement, which displays the following:
Settled
In line with your selection criteria, the system displays all the order items that were settled (or if you are working in test mode, which would have been settled).
Could not be settled
In line with your selection criteria, the system displays all order items for which ERS is defined but could not be settled. It also lists the reasons.
If the system reports being unable to invoice a transaction, you should exclude the transaction from ERS to avoid it being included in the log the next time ERS is run.
Select the item and choose Exclude from ERS.
The system also generates and possibly sends a message to inform the vendor(s) about the transaction settled, depending on the settings in Customizing.
You can display the following environment information for the order items selected. To do this, choose Goto ®:
Display purchase order
Display invoice
Display material document
Display long text

How to set "Created By" field for KD Documents

Similar Messages

Maybe you are looking for