How to set CTD ( common transport directory ) ????

i need it pls help me ........?????

Hi,
Please reade below link and implement accordingly.
http://help.sap.com/saphelp_nw70/helpdata/en/de/6b0da5f34d11d3a6510000e835363f/content.htm
http://help.sap.com/saphelp_sm32/helpdata/en/c4/6045377b52253de10000009b38f889/content.htm
Regards,
Anil

Similar Messages

How to share Common transport directory with Production

Dear All,
we are following three-system landscape with Dev & Qas on the same server & production server in a Cluster.Now I am going to start the production server installation but I have few query before starting the installation:
1. The Dev+Qas server is sharing a common transport directory (/usr/sap/trans). The production server needs to share the same transport directory.I have few options:
a)Should I need to share the common transport directory during the installation
b)I install the production server first then I can share the transport directory which is currently being shared by Dev & Qas system
c)I need to share the Common transport directory first & then start the installation so that during installation Production system writes into the Common traansport directory
Please advise.
Thanks in advance,
Sandipan

Hi,
By mounting, do you mean just to share it as we are using Windows Server 2003 x64 bit system, so just by sharing will it work.
Need your suggestion on whether can I install the production system first & then by sharing the transport directory from Dev( or Qas) it can join in the exisitng transport directory. As during installation of production server also,the system will create /usr/sap/trans. If I don't share the already exisitng /usr/sap/trans of Dev system, can I share it later so that production system can join into the common transport directory without any problem.
Please guide,
Thansk & Regards,
Sandipan

Common Transport Directory

Hi Experts,
I have some doubt about the procedure to setup a common transport directory.
Lets assume I have a 3 systems landscape (Windows env) with DEV,QTY and PRD systems. After installing SAP on the three servers, now I have to include the above systems in a common transport domain. I want DEV system to be my domain controller.
My doubts are:
1) Before configuring DEV as domain controller using STMS, do I need to share /usr/sap/trans dir for this system ?
2) (Assume /usr/sap/trans dir for DEV is shared by now) After I include the QTY and PRD system into this domain using STMS, How will the QTY and PRD system understant that they shud use the shared "/usr/sap/trans " dir of DEV and not their local /usr/sap/trans. Do I manually edit some settings for QTY and PRD systems to achieve this ? Please let me know exact steps that are involved.
Thanks !
Mandeep

Hello,
Try the following.
http://www.sap-img.com/basis/how-to-do-the-tms-configuration.htm
And also,
STMS configuration.
1.Login to 000 client with user DDIC
2. goto STMS --> prompts to create a domain controller --> check with entries and save.
3. goto systemoverview -->SAP system --> create virtual system ( For QAS and PRD)
4.goto Transport routes -->change --> configuration --> standard configuration --> three system in group --> enter SID's --> specify Three system configuration and distribute configuration to all systems.
Once you created virtual systems and then goto transport routes and configutation -->change --> standard configuration --> threesystem group. specify SID's of three systems and save then specift three system configuration and distridute configuration.
Once you have done above thing add QAS and PRD in to landscape.
1. Login to PRD system 000 client with DDIC user.
2.STMS --> prompts to create domain controller > select other configuration and add to existing domain controller ( i.e DEV because DEV is domain controller).> specify system details for PRD system.
3.Once you added and saved. login to DEV system --> 000 with DDIC --> stms --> system overview --> select PRD system --> SAP system --> Approve and save.
4. follow the same steps for QAS also.
5. A communication user will be created between domain controller and remaining systems in a landscape. ie TMSADM
6. the entire configuration will be stored in DOMAIN.cfg file in trans/bin folder
I hope this information will helpful to you.
Note: Points always encourage me to reply !!

How to set the Common Pov in Web Analysis

Dear All,
Can any one tell me how to set the common Pov for two diffrent reports underon data source in the Web analysis.

How could it not be 5A?. If you have A for each member and then you select 5 members you are going to get 5A. If you don't want 5A then what do you want the Avg of A across the 5 members?
The tools are working the way they are designed to, your requirement is a little out of the ordinary. Unfortunately, Web Analysis does not have conditional logic.
Try taking my previous suggestion and adding another member in Essbase called "Count", make it dynamic calc and the formula should be ' 1; '
The purpose here is to get a value of one in the count member for each member you are going to select in your filter. So, if you select five members in the filter, Web Analysis will now return 5A and it will return the result of "Count" which will be 5. Create a calculated member that divides the 5A value by the count value 5. That will give you the average A for the 5 members, then you can divide by 12.

Common Transport Directory Migration

Our ERP 6.0 system is running on Windows 2003 Server 64 bit. The default install created a separate transport directory on each CI host. As a result users do not have log information of their transports into the PROD system, from the DEV or QAS systems. Currently they have to log into each instance to get their transport log information from the transport organizer.
I have read the online help and reviewed the SAP Notes on creating a common directory however I have not found any solid information to assist migrating/merging an already existing TMS setup. .
I have created the following check list in preparation to merge the separate transport directories into a common transport directory. Is there anything I missed?
1. Schedule maintenance to ensure Business analysts/Developers are out of all ERP systems.
2. Backup the entire \usr\sap\trans directories on DEV, QAS and PROD before beginning.
3. Update the TMS Domain Profiles for each respected system with the common directory path of the Transport Domain Controller. In our case it is the Dev server.
DIR_TRANS = \\hostname\sapmnt\trans
4. Merge the following QAS directories into the respected DEV directories (Confirm to overwrite existing files)
\usr\sap\trans\cofiles
\usr\sap\trans\data
\usr\sap\trans\logs
5.Repeat with the PROD directories into the respected DEV directories (Confirm to overwrite existing files)
\usr\sap\trans\cofiles
\usr\sap\trans\data
\usr\sap\trans\logs
Te goal is to insure that the delta changes between PROD, QAs & DEV are fully merged.
Common Transport directory
[http://help.sap.com/saphelp_erp60_sp/helpdata/EN/de/6b0da5f34d11d3a6510000e835363f/frameset.htm]
Thanks,
Jon Sells

We tried to implement this migration of the common transport directories and it was not successful. We ended up restoring back to the individual EPS directories.
What happened is that the QAS Queues did not reflect all the correct transports. (Yes, Siddhesh, I did as you said) In addition the add to buffer (crooked arrow) not longer functioned for newly released transports from DEV.
Does anyone have a white paper or SAP Note that would help on Migrating a common Tranpsort directory for Windows? Our Developers & Analyst do not like having to logon to each system to see view the transport logs. They are under the impression that they shoul be able to use SE10 in DEV and see the transport/import logs.
Thank you
Jon Sells

Common transport directory configuration

Dear Gurus,
I installed ECC6.0 sr3 (dev and quality on the same server) windows 2003. Production server on seperate server. Now I want to configure common transport directory.
For dev and qas using same transport directory beacuse they are in the same server.
But production server is having seperate transport directory.
Is it compulsory having the common tranport directory.
Can Any body give the steps to add the production server in the same tranport directory.
Regards
Rao.

Is it compulsory having the common tranport directory.
No, it is not compulsory.
You can use STMS tcode to configure the same.
For further information, please go through the below link:
[Transport Management System|http://help.sap.com/saphelp_erp60_sp/helpdata/EN/44/b4a0137acc11d1899e0000e829fbbd/frameset.htm]
Regards,
Faisal

Need common transport directory(heterogeneous)

Hello All,
I have to include three ECC 5.0 systems and three BW systems into Domain controller( Production solman 7.0)
1) Three ECC 5.0 System are running on Red Hat Linux (OS)
2) Three BW systems are running on Red Hat Linux (OS).
3) Domain Controller (solman) is running Windows 2003 server
Above situation is Heterogeneous environment.
Now i have to configure common transport directory for all above systems ( seven systems), which are running on Different OS like Red Hat Linux and Windows 2003 Server.
For common transport directory what are the steps have to be done...?
Please help me out.
Thanks and Regards,
Kiranbabu

Kiran-
What i think is you need to work with CTS+ configuration and please see the OSS note: 1003674 this is the central note which might be handy for you.
http://help.sap.com/saphelp_nw70/helpdata/en/45/ec25370fdc3481e10000000a1553f6/frameset.htm
Hope this might help you some way

How to set permissions IN Open Directory USING Open Directory groups?

Hi all,
Apologies if I've missed this but have been searching for two days trying to figure out how to delegate permissions within the OD to a number of different OD groups and i can't seem to find any way to do this either at the command line or with WGM.
Examples: an OD group containing those who will manage the full directory need to have permissions on all containers, child objects, and their attributes in the directory. For this one in particular I seem to be able to nest a group in the default Admin group, but this isn't really what i'm after. I need to create OD groups with the ability only to manipulate objects of class apple-computer and similarly, apple-user (really all inetOrgPerson objects). In a nutshell: how do i set permissions on specific attributes or object classes using OD groups?
thanks for any pointers...
-andrew

I think i just answered my own question: Open Directory is OpenLDAP. slapd is all i need.

How to set the server root directory in 10.1.3 ?

Hi all,
I've recently migrated from 1012 to 1013. Unfortunately, i'm having problems compiling the .jsp portion of my project. Every .jsp comes up with the error:
"Error: JSP Files must reside in the server root directory or a subdirectory beneath it"
Can anyone enlighten me as to where i can change this setting?
Thankyou for your time.

That link is to an older version of Jdev. There is no 'Common' section in project properties and no html input path either. There is a 'Project Content' section and within that section there is a 'Web Application' option. However i get "ArrayIndexOutOfBoundsException" whenever i click on the 'Web Application' option. I suspect this is the area where i can configure the .jsp portion of my project. I can't get to it though due to the exception.

How to set a common page for all users after loging on?

hi all,
Now "My Dashboard" is the default page after logon.
i want to set a default home page for all users. users can see the home page after loging on.
how to change the default dashboard from "My Dashboard" to "Home page" for all users?
thanks,
dan

Hi,
Steps:
Tried to set default dashboard for all the users.
1. Created a session init block
2. Used data source as select '/shared/SH Test/_portal/Test1' from dual
3. Assigned this value to PORTALPATH session variable
4. In Presentation services > Administration > My account > Default dashboard should be set to 'default'. Then only the dashboard specified in init block will be displayed otherwise My account will override the init block.
5. Save the changes made to rpd.
5. Logout and relogin to see if it is working fine. it is working perfectly fine.
For details please refer the GSC replication document. But it is for all the users.
if customer would like to have user/group based home page.
1. They may need to have 2 separate tables.
i. Group_path_tab with 2 columns. Group_id, portal_path
Have group wise portal path for all the groups
ii. User-group map table
Group_id, Group_name, user_id
User should be part of some group.
2. Then in the init block write the sql should be something like this
select A.portal_path from Group_path_tab A, User_group_map B
where B.user_id = :USER
and B.Group_id = A.Group_id
SO based on USER session variable, it will try to identify the group and then the portal_path.
Finally assign this value to PORTALPATH session variable.
ref:
http://total-bi.com/2011/01/obiee-11g-change-default-dashboard/
Thanks!

How to set the Upload Destination Directory for RichFileUpload ?

Hi! I'm using the RichFile Upload component for uploading the files to server..
I have configured the file the size to be uploaded, but could not set the destination directory... The web.xml entries I have in my project is:
<context-param>

<param-name>org.apache.myfaces.trinidad.UPLOAD_MAX_MEMORY</param-name>

<param-value>512000</param-value>
</context-param>
<context-param>

<param-name>org.apache.myfaces.trinidad.UPLOAD_MAX_DISK_SPACE</param-name>

<param-value>5120000000</param-value>
</context-param>
<context-param>

<param-name>org.apache.myfaces.trinidad.UPLOAD_TEMP_DIR</param-name>

<param-value>/tmp/TrinidadUploads/</param-value>
</context-param>
<filter>
<filter-name>trinidad</filter-name>
<filter-class>org.apache.myfaces.trinidad.webapp.TrinidadFilter</filter-class>
</filter>
<filter-mapping>
<filter-name>trinidad</filter-name>
<servlet-name>Faces Servlet</servlet-name>
<dispatcher>FORWARD</dispatcher>
<dispatcher>REQUEST</dispatcher>
</filter-mapping>
By default the uploaded files are stored in :
/u01/home/developer/.jdeveloper/system11.1.1.0.17.45.24/o.j2ee/embedded-oc4j/config
I'm using Linux OS and JDev11g .
Why is the desination directory configured in web.xml not being used?
Am I doing any thing wrong?
Any suggestions ?
Thanking you,
Samba

Hi! Ric,
This is the entire web.xml :
<?xml version = '1.0' encoding = 'UTF-8'?>
<web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd" version="2.5" xmlns="http://java.sun.com/xml/ns/javaee">
<description>Empty web.xml file for Web Application</description>
<context-param>
<param-name>javax.faces.STATE_SAVING_METHOD</param-name>
<param-value>client</param-value>
</context-param>
<context-param>

<param-name>org.apache.myfaces.trinidad.UPLOAD_MAX_MEMORY</param-name>

<param-value>512000</param-value>
</context-param>
<context-param>

<param-name>org.apache.myfaces.trinidad.UPLOAD_MAX_DISK_SPACE</param-name>

<param-value>5120000000</param-value>
</context-param>
<context-param>

<param-name>org.apache.myfaces.trinidad.UPLOAD_TEMP_DIR</param-name>

<param-value>/tmp/TrinidadUploads/</param-value>
</context-param>
<filter>
<filter-name>trinidad</filter-name>
<filter-class>org.apache.myfaces.trinidad.webapp.TrinidadFilter</filter-class>
</filter>
<filter-mapping>
<filter-name>trinidad</filter-name>
<servlet-name>Faces Servlet</servlet-name>
<dispatcher>FORWARD</dispatcher>
<dispatcher>REQUEST</dispatcher>
</filter-mapping>
<servlet>
<servlet-name>Faces Servlet</servlet-name>
<servlet-class>javax.faces.webapp.FacesServlet</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet>
<servlet-name>resources</servlet-name>
<servlet-class>org.apache.myfaces.trinidad.webapp.ResourceServlet</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>Faces Servlet</servlet-name>
<url-pattern>/faces/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>resources</servlet-name>
<url-pattern>/adf/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>resources</servlet-name>
<url-pattern>/afr/*</url-pattern>
</servlet-mapping>
<session-config>
<session-timeout>35</session-timeout>
</session-config>
<mime-mapping>
<extension>html</extension>
<mime-type>text/html</mime-type>
</mime-mapping>
<mime-mapping>
<extension>txt</extension>
<mime-type>text/plain</mime-type>
</mime-mapping>
<ejb-local-ref>
<ejb-ref-name>ejb/local/SessionEJBLocal</ejb-ref-name>
<ejb-ref-type>Session</ejb-ref-type>
<local>com.prapansol.demos.SessionEJBLocal</local>
<ejb-link>SessionEJB</ejb-link>
</ejb-local-ref>
</web-app>
And about the other details you asked :
1. I'm not using any custom UploadFileProcessors.. I'm using the default one.
2. I tried with and with out the TrinidadUploads directory
But still the same effect!
Can you suggest where I'm going wrong?
Thankyou
Samba

How to set default, rendered save directory please?

So every time I want to export (share) my movie to my PC, the default location is always "My Documents".
I have set all Scratch Disk locations for my preferred folder, not My Documents.
Is there a location where I can input a default "Share To" directory. It's a pain to navigate (Browse) through my PC every time to save to my preferred directory.
Thanks for your time.
Chris

The only way I have found to make the share directory stick is in a Quick Share preset. You get a chance to save the current export settings to a Quick Share preset just after the export has completed. On the panel where you see the green checkmark and "Save Completed," there is a "Save as Quick Share" button further down that you click to create a Quick Share.
The next time you want to export using those same settings, instead of going through all the steps, just use the Quick Share preset that you saved and your path should be ready to go.

How to set up a virtual directory on Application Server

The environment of my application is Application server 9i version 2, on windows 2000, form 9.0.2.
I am trying to get the ORACLE 9i forms show_document to work.
I have successfully created an out file in the server directory.
I need the document to be displayed by the form.
Let me tell you more about my server.
I installed Oracle application server on drive E.
I copied my application to drive E and named PY which has 4 folders including :
E:\PY\fmb (for fmb)
E:\PY\forms (for fmx)
E:\PY\sql (for sql programs)
E:\PY\locrep (for lst files which are generated from sql programs)
Someone told me I should create a virtual directory, e.g. docs, in your httpd.conf file to point to e:\py\locrep
I've seen 4 httpd.conf files so I don't know which one I should modify and what should I type in exactly on what part ????
E:\ora9ias\apache\apache\conf\httpd.conf
E:\ora9ias\apache\apache\conf\httpd.conf.default
E:\ora9ias\apache\apache\conf\httpd.conf.smibak
E:\ora9ias\dcm\config\plugins\apache\httpd.conf
After I modify the httpd.conf file, so what will my URL be ? Also, I have a lot of reports, I would like to run different reports at the same time ??????
Thank you very much.
Trang

The best way to edit httpd.conf is using Enterprise Manager Website. Open this site (http://machine:1810) and drill down on your application server, and then on HTTP Server. Open link Advanced server Properties. Now you see a list of all configuration files. Click on a file to open it.
To add the virtual path:
- You could best add your virtual path in file forms90.conf (it is included in httpd.conf with the <include> tag).
- Within this file you already find some virtual path definitions: Look for the AliasMatch tag, e.g. for the 'forms90/html' virtual directory.
- Copy this line and change 'html' into the directory name you like to use, e.g. 'myfiles'. Map it to the physical directory (on your E: drive) where your files are. (E: must not be a network drive, however).
- browse to your files using: http://machine:7777/forms90/myfiles/filename.
Peter

Cleaning Up the Transport Directory

Dear All
I want to clear the old files from the trans directory, for the same, i exectute the command on Dos prompt,in
Windows
in BIN folder
tp check all
it generate following error
tp version is :- 372.04.57 (release 700, unicode enabled)
kernel release 700
This is tp version 372.04.57 (release 700, unicode enabled)
E-TPSETTINGS could not be opened.
EXIT
Error in TPSETTINGS: transdir not set.
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0208
tp finished with return code: 208
meaning:
error in transportprofil (param missing, unknown,...)
the Transport tool setting, the parameter
TRANSIDR is set
ides\sapmnt\trans &
DIR_TRANS value is
ides\sapmnt\trans
so please suggest me How to Cleaning Up the Transport
Directory
Thanks
Ganesh

Hi Ganesh,
Please go through the below links.
Import of a request failing : ERROR: connect failed due to DbSL load lib fa
how to add request in the buffer
http://sap.ittoolbox.com/groups/technical-functional/sap-basis/tp-finished-with-return-code-208-1433190
http://www.sapfans.com/forums/viewtopic.php?f=12&t=67602
Re: Import of a request failing : ERROR: connect failed due to DbSL load li
-Srini

I want to change the transport directory

Hello gurus,
I want to change the tranport directory in all our systems. Please advise me how to do it.
I really appreciate your help.
Regards,
N.S

Hi N.S,
How about :
http://help.sap.com/saphelp_47x200/helpdata/en/d5/10b4496f0f11d2b41a006094b9ea64/frameset.htm
is it common transport directory ?
To change the common transport directory configuration, you can
first go to transaction AL11 of one of your system, for example, PRD.
Change the 'DIR_TRANS' parameter, so that it points to the directory that you want to change
Then go to STMS, choose 'System Overview' button to display systems
of your transport domain. Double click PRD, with 'Transport
Tool' tab, click 'Display <-> Change' button, you can change the
'transdir' value.
Please make sure it is equal to the same configuration of 'DIR_TRANS'.
Repeat the above steps on your other system. Make sure the configurations
of 'transdir' and 'DIR_TRANS' are the same as that on the PRD system.
cheers,
Vincent

How to set CTD ( common transport directory ) ????

Similar Messages

Maybe you are looking for