How to set DB date different from Host date?

DBAs,
I've got a requirement to have 1 database in sync with a development region of the mainframe. This date is 2 months in the past. Is it possible to have the database have a different date/time than the OS time on the unix server? One option (more expensive) is for the db to have it's own server (or vmware) where we just reset the OS time. We're on 9i on aix.
Thanks
Alex

In my Oracle 7(.0) days, there was, if I am not mistaken, an database parameter for setting a default date, but I have no idea if this is still possible...Checked the 7.3 manuals, but can't find anything, that triggers my mind. Can be that it is still around, but in that case probably went underground (became an hidden / _$ parameter). By the way, this is a typical question for the oracle-l forum on www.freelists.org
Message was edited by:
mgralike

Similar Messages

How to set an Application Item from PL/SQL

I am attempting to set an Application Item
After login to my app, I want to retrieve a row from my SETTINGS table and populate some Application Items with the settings information so that I can
display some of that settings information on every page.
Just to start, I created one Application Item named F106_YEAR
I then created a Shared Components Application Process which executes on New Session: After Authentication
I created this process as an Anynomous PL/SQL block.
declare
aucyr varchar(4);
begin
select year into auctyr
from settings;
:F106_YEAR := aucyr;
end;
I've tried a couple of other Syntax tricks attempting to reference the Application Item F106_YEAR from within PL/SQL (like V('F106_YEAR') but nothing seems to be working.
I'm sure that I am missing something simple. Can someone tell me how to set an Application Item from PL/SQL?
Thanks in advance.

I'm still doing something wrong because this is not working for me.
I've tried both of the following versions as an Application Process set to run on New Session after Authentication:
declare
auction_year varchar(4);
begin
select year into auction_year
from PBUUC.SETTINGS where rownum < 2;
:F106_AUCTION_YEAR:=auction_year;
end;
and I also tried:
declare
auction_year varchar(4);
begin
select year into auction_year
from PBUUC.SETTINGS where rownum < 2;
APEX_UTIL.SET_SESSION_STATE (p_name, p_value);
end;
F106_YEAR is a global Item (shared components).
The select statement works just fine in SQL*PLUS so I know that it is correct.
If I run the debugger and log into the application, here is the output. Shouldn't I see my Application Process get called if it is set to run on New Session after Validation?
My Application process is named RETRIEVE_AUCTION_SETTINGS
0.01: A C C E P T: Request="P101_PASSWORD"
0.01: Metadata: Fetch application definition and shortcuts
0.01: alter session set nls_language="AMERICAN"
0.01: alter session set nls_territory="AMERICA"
0.01: ...NLS: Set Decimal separator="."
0.01: ...NLS: Set NLS Group separator=","
0.01: ...NLS: Set date format="DD-MON-RR"
0.01: ...Setting session time_zone to -04:00
0.01: NLS: wwv_flow.g_flow_language_derived_from=0: wwv_flow.g_browser_language=en-us
0.01: Fetch session state from database
0.02: ...Check session 695371898690095 owner
0.02: ...Check for session expiration:
0.02: ...Metadata: Fetch Page, Computation, Process, and Branch
0.02: Session: Fetch session header information
0.02: ...Metadata: Fetch page attributes for application 106, page 101
0.03: ...Validate item page affinity.
0.03: ...Validate hidden_protected items.
0.03: ...Check authorization security schemes
0.03: Session State: Save form items and p_arg_values
0.03: ...Session State: Save "P101_USERNAME" - saving same value: "jps"
0.03: Processing point: ON_SUBMIT_BEFORE_COMPUTATION
0.03: Branch point: BEFORE_COMPUTATION
0.03: Computation point: AFTER_SUBMIT
0.03: Tabs: Perform Branching for Tab Requests
0.03: Branch point: BEFORE_VALIDATION
0.03: Perform validations:
0.03: Branch point: BEFORE_PROCESSING
0.03: Processing point: AFTER_SUBMIT
0.03: ...Process "Set Username Cookie": PLSQL (AFTER_SUBMIT) begin owa_util.mime_header('text/html', FALSE); owa_cookie.send( name=>'LOGIN_USERNAME_COOKIE', value=>lower(:P101_USERNAME)); exception when others then null; end;
0.04: ...Process "Login": PLSQL (AFTER_SUBMIT) wwv_flow_custom_auth_std.login( P_UNAME => :P101_USERNAME, P_PASSWORD => :P101_PASSWORD, P_SESSION_ID => v('APP_SESSION'), P_FLOW_PAGE => :APP_ID||':1' );
0.06: ...Process "Clear Page(s) Cache": CLEAR_CACHE_FOR_PAGES (AFTER_SUBMIT) 101
0.06: Nulling cache for application "106" page: 101
0.00:
0.00: S H O W: application="106" page="1" workspace="" request="" session="695371898690095"
0.01: alter session set nls_language="AMERICAN"
0.01: alter session set nls_territory="AMERICA"
0.01: ...NLS: Set Decimal separator="."
0.01: ...NLS: Set NLS Group separator=","
0.01: ...NLS: Set date format="DD-MON-RR"
0.01: ...Setting session time_zone to -04:00
0.01: NLS: wwv_flow.g_flow_language_derived_from=0: wwv_flow.g_browser_language=en-us
0.01: Application 106, Authentication: CUSTOM2, Page Template: 2904114531488186
0.01: ...Session ID 695371898690095 can be used
0.01: ...Application session: 695371898690095, user=JPS
0.01: ...Determine if user "JPS" workspace "1040027630222986" can develop application "106" in workspace "1040027630222986"
0.01: ...Check for session expiration:
0.01: Session: Fetch session header information
0.01: ...Metadata: Fetch page attributes for application 106, page 1
0.01: Fetch session state from database
0.02: Branch point: BEFORE_HEADER
0.02: Fetch application meta data
0.02: Computation point: BEFORE_HEADER
0.02: Processing point: BEFORE_HEADER
0.03: Show page template header
0.03: Computation point: AFTER_HEADER
0.03: Processing point: AFTER_HEADER
0.04: Computation point: BEFORE_BOX_BODY
0.04: Processing point: BEFORE_BOX_BODY
0.04: Region: Auction_Title F106_AUCTION_YEAR

How to set a date range for date field ?

Dear Experts,
Scenario:
I have a query in validating the date field in my BSP application. My application is for maintain infotype 0023 Other/Previous Employers online by employees in the company.
As per our design we are maintaining the all employment details of the employee both ( with in the current company / previous employment outside the company) in the same infotype.
Every employee will have a hiring date within the SAP HR system. We consider this date as the cutoff date between current and previous employment in our application. When the employee updating the details wia BSP page I need to check the following.
Record inside current company: Validation that, the user should only able to enter BEGIN DATE (BEGDA) greater than or equal HIRING DATE and END DATE(ENDDA) should be greater than FROM DATE (BEGDA).
Record outside current Company: Validation that, the user should only able to enter BEGIN DATE (BEGDA) less than or equal HIRING DATE and END DATE (ENDDA) should be greater than FROM DATE (BEGDA) and less than HIRING DATE.
Technical Requirement:
How to set a date range for date field, i.e. how we can limit the date range in a HTMLB date field? Can this it be achieved via standard functionality of HTMLB?
Following is the code to describe date field in my application.
    <htmlb:inputField id= "ENDDA_NEW_IN"
                      type= "date"
                doValidate= "TRUE"
                  showHelp= "TRUE"
                  disabled= "FALSE"
                     width= "183"
                     style= "cssTextAreadate"
                     value= "<%='99991231'%>"/>
Thanks a lot in advance for your assistance and help.
Cibinu2026
Edited by: cibin kuruvilla on Nov 12, 2008 11:13 AM

Hi,
This functionality is known to be very important and is a key part of the next major release of the JRC planned for the first half of 2008.
Regards,
<p>Blair Wheadon</p>
<p>Product Manager, Crystal Reports</p>

How to set Oracle Data Integrator Timeout paramter value as unlimited

Hi
Can any one help me how to set Oracle Data Integrator Timeout (ODI menu>User Paramter>Oracle Data Integrator Timeout > paramter value as unlimited.
By default it is 30 and i want to change it as unlimited.
I am connecting linux box through windows using citrix and opened ODI and start the scenario execution (my scenario execution in loop and it will execute continuesly) after execution starts I an logout from citrix (I am not closing ODI) and after some time like 50 min my odi execution is stoped due to timeout.
my ODI execution should continue in my absence that to unlimited.
Please help me it is urgent
Regards,
Phanikanth

Thanks Bhabani
Is it work for unlimited in linux box because I have given operator dispplay limit(0=no limit) as 1000000 and I am unable to see the execution session details on Operator>session list
later i have changed to 10000 and click on ok and just refreshed and it is working fine
If I give mensioned below it will not impact on ODI ?
windows it is working but I have doubt on linux version
Please help me
Regards,
Phanikanth

How to set default date value to a field on screen

How to set default date value to a field on screen and allow users to modify it ....

Hello,
In the PAI module, you need to save the changes to the database using the command MODIFY.
Follow an example:
Create or change a message in database table T100. If there is no message with the number 100 in the MYMSGCLASS message class in English, it will be created. Otherwise only the text is changed.
DATA message_wa TYPE t100.
message_wa-sprsl = 'EN'.
message_wa-arbgb = 'MYMSGCLASS'.
message_wa-msgnr = '100'.
message_wa-text = 'Some new message ...'.
MODIFY t100 FROM message_wa.
Regards.

How a administrator user is different from read-write user in Aruba Central?

Q: How a administrator user is different from read-write user in Aruba Central?
A: Aruba Central allows administrator to create multiple user of different access levels to help manage the system. This access levels include:
read only
read/write
guest operator
NOTE: These access levels can be imposed on a specific "ap group" or a set of "ap groups" or all of them.
Therefore looking at the roles, many of the aruba central customers, had a question of how a administrator user is different from read-write user.
Administrator is the only user who can move access points between groups. Read/Write user Do Not Have Permission to execute this action.

Hi,
I've managed to get what I needed by using a shift register + event structure as suggested by Adnan. However, I face another problem after implementing SR+event. I've attached two files, first the original program and second the updated program using SR + event. (it's only the jpg file as I've forgotten to save the labview program, will upload the program by tomorrow.
In the original program, I have an elapsed time that is able to run continuously when I run the program. In the updated program, my elapsed time don't seem to run continuously when I run the program (as shown by elapsed time indicator). I need the elapsed time to run continuously as a input to calculate my motor profile.
I suppose this is caused by the introduction of the event structure, will adding a case structure to wrap the event structure solve the problem or is there another way to get pass this. Appreciate if someone could drop me a pointer or two.
Thanks
Attachments:
Mar 16 - continuous elapsed time.png ‏12 KB
Mar 16 - elapsed time not continuous after introducing shift register + event structure.png ‏17 KB

I have an airport express and want to know how to set up two different wireless networks. One with 5GHZ and one with 2.4GHZ so different devices can connect to either.

I have an airport express and want to know how to set up two different wireless networks. One with 5GHZ and one with 2.4GHZ so different devices can connect to either. I have an iphone 4 that will not connect to 5ghz.
thank you!

Your AirPort Express is already providing two separate 2.4 GHz and 5 GHz bands, but each band is using the same wireless network name.
This is the default setup for the AirPort Express, which is recommended for most users. The theory here is that devices will automatically connect to the best quality signal based on their capabilities and distance in relation to the AirPort Express.
It is possible to assign a different name to the 5 GHz band, and then "point" devices at that network to connect. Some users swear by this option.....(I am not one of them).... but you might want to give it a try to see how it works for you.
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the AirPort Express
Click Edit in the smaller window that appears
Click the Wireless tab at the top of the next window
Click Wireless Options near the bottom of the next window
Enter a check mark next to 5 GHz Name.....which will automatically add "5 GHz" to the network name....so you can identify it
Click Save, then click Update and wait a full minute for the Express to restart
Now you will need to "point" your 5 GHz capable devices at the 5 GHz network name. 2.4 GHz devices will connect to your "other" network name.

How to set JDBC Data Sources in Oracle MapViewer for Oracle database 12c Release 1 (12.1.0.1)

How to set JDBC Data Sources in Oracle MapViewer for Oracle database 12c Release 1 (12.1.0.1)?
The following is my configuration in the conf\mapViewerConfig.xml:
<map_data_source name="mvdemo12"
jdbc_host="127.0.0.1"
jdbc_sid="orcl12c1"
jdbc_port="1522"
jdbc_user="mvdemo"
jdbc_password="7OVl2rJ+hOYxG5T3vKJQb+hW4NPgy9EN"
jdbc_mode="thin"
number_of_mappers="3"
allow_jdbc_theme_based_foi="true"
editable="true"/>

But it does not work.
After use "sqlplus mvdemo/[email protected]:1522/pdborcl", it connected to the Oracle database 12c.
Does anyone know it?
Thanks,

For 11.1.1.7.1 use the syntax for jdbc_sid, i.e.
//mypdb1.foo.com as described in the README,
- MapViewer native (non-container) data sources can now use database service name in place of SID. To supply a db service name, you will use the same jdbc_sid attribute, but specify the service name with double slashes in front, such as follows:
<map_data_source name="myds"
    jdbc_host="foo.com"
    jdbc_sid="//mypdb1.foo.com"
    jdbc_port="1522"
/>
For 11.1.1.7.0 use a container_ds instead.
i.e. instead of using
<map_data_source name="my_12c_test"
                   jdbc_host="mydbinstance"
                   jdbc_sid="pdborcl12c"
                   jdbc_port="1522"
                   jdbc_user="mytestuser"
                   jdbc_password="m2E7T48U3LfRjKwR0YFETQcjNb4gCMLG8/X0KWjO00Q="
                   jdbc_mode="thin"
                   number_of_mappers="6"
                   allow_jdbc_theme_based_foi="false"
                   editable="false"
   />
use
<map_data_source name="my_12c_test"
                   container_ds="jdbc/db12c"
                   number_of_mappers="6"
                   allow_jdbc_theme_based_foi="false"
                   editable="false"
   />
In my case the Glassfish 3.1.2.2 JDBC connection pool definition was
Property
url jdbc:oracle:thin:@mydbinstance:1522/pdborcl12c.rest_of.service.name
Uncheck the Wrap JDBC Objects option in Advanced panel, i.e. the Edit JDBC Connection Pool Advanced properties page.
Add a JDBC resource for that newly created pool
Use that in mapviewerconfig.xml as above

How to set the data fields column wide at sqlplus

Dear Sir/Madam
I would like to know how to set the data fields column wide at sqlplus
Thanks
Francis

see
http://download.oracle.com/docs/cd/B19306_01/server.102/b14357/ch6.htm#sthref1131
and the FORMAT clause of the COLUMN command in
http://download.oracle.com/docs/cd/B19306_01/server.102/b14357/ch12013.htm#BACHCABF

How to set the Data Synchronisation mode for ADF BC component?

Hi All,
How to set the Data Synchronisation mode for ADF BC component
Thanks
Raghavendra

Can you clarify what you mean by the data synchronization mode?
If you mean the Sync Mode, then in 10.1.3 you set this property by:
1. Selecting your DataBindings.cpx file
2. Expanding the "Data Control Usages" section in the structure window
3. Selecting the ADFBC-based data control
4. Setting the "syncMode" property in the property inspector.

How to set this DATS parameter

Hi Pros,
I am calling function 'HR_FORMS_TIM_GET_B2_RESULTS' in the program , its input parameter is BEGDA, I transfer a date variable to BEGDA, but does not work. can not get any data. but if I run this function in SE37, I input date '20140807', successfully get result. please tell me how to set this DATS parameter?

Hi,
You might be passing the date in '12.12.2014' or '12/12/2014' format. Please
use the function module 'CONVERSION_EXIT_BEGDA_INPUT' to convert the date
to internal format and then pass it to the function module.
Thanks

How Oracle Ultra Search is Different from Intermedia Search

hi,
Can any one please tell me how Oracle Ultra Search is Different from Intermedia Search .from an article i came to know that Ultra search helps you to search dataq in Multiple RDBMS ,documents,URLs etc . but i think these options are also there in Intermedia
regds
sangeeth

Ultra Search is an application on top of Oracle Text (aka interMedia Text). You can find more information about it here: http://otn.oracle.com/products/ultrasearch/content.html

How MD793 HN/A is different from MD796HN/A

How MD793 HN/A is different from MD796HN/A

I don't know what those numbers mean. Could be their own internal stock numbers? What Web site are you talking about?
These are the basic models: https://support.apple.com/kb/HT5452. Other specs are generally the market where they are distiributed, color and other details but not usually technical specs.

ERPI: how to set up drill through from Planning to EBS

Hi,
When you guys know how to set up drill through from Planning to EBS through ERPI ??
I encountered the following message when I tried to drill :
no drill through reports found at this location
I think I didn't set up the drill through functionality properly.
Regards,
Eddy

Can you check the log file for any errors? Also, check if the drill regions are created in the application. You can navigate to process details in ERPI and select the show log link for the corresponding process id. That should indicate if the drill regions were created on the target.
Thanks,
Bala

How to set Decimal Point position from right to left Serial Read Evaluate Number within Range over RS-232

I am new to Labview, I am communicating with a TQ8800 Torque meter via RS-232. The 16 digit data stream is as follows:
D15 D14 D13 D12 D11 D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 D0
Each digit indicate the following status :
D0 End Word
D1 & D8 Display reading, D1 = LSD, D8 = MSD
For example :
If the display reading
is 1234, then D8 to D1 is :00001234
D9 Decimal Point(DP), position from right to the left
0 = No DP, 1= 1 DP, 2 = 2 DP, 3 = 3 DP
D10 Polarity
0 = Positive 1 = Negative
D11 & D12 Annunciator for Display
Kg cm = 81 LB inch = 82 N cm = 83
D13 1
D14 4
D15 Start Word
I am using a modified version of the basic_serial_write_read.vi. I am attempting to parse the 16 digit data stream extracting out the number and whether it is positive or negative. I am having trouble with the decimal point placement. Is there an example that could help me with this? After the number is parsed I am then comparing it to see if it is within +/- 9.2 N cm. If it is then the test passes. I am outputing the data to a file. I have included the vi. Also how can I check for different units of the annunciator. Any help would be appreciated. Thank you.
Attachments:
basic_serial_read.vi ‏100 KB

What is the definition of the End Word? You will likely need to figure this out experimentally (the manual doesn't seem to define it). Whatever it is, you should set that as the termination character and enable the termination character. That will help you in keeping your messages in sync. Just tell the VISA Reads to read more than a message should be, something like 30 should work nicely.
The error you are seeing is a buffer overload. This means that the instrument is sending data to you faster than you can process it. So you need to figure out how to perform the read faster. File IO is slow. So you should put that into a seperate loop so that your loop does nothing but read the data from the port as quickly as the data comes in. Use a queue to send the data from the reading loop to the logging loop. This is known as a Producer/Consumer.
And here is a cleaned up version of your code. No need for your express VI or the formula node. Some other general cleaning up also done to make it easier to read.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
serial read.png ‏80 KB

How to set expiry date for a mail account?

Hi there, i'm new in Messaging Server, need help here on how to set an expiry date to a specific mail user since the mail user will be just a temporary mail user. Instead of deleting manually, is there any smarter way of doing it?

Directory Server can be set to exipre a password, indeed. That will prevent the user from logging in, when it happens. There will be no warning, or anything like that.
The account will still be on the server, and the mailbox will still contain mail. It will still receive mail.
If you want to turn an account off, you will have to make some arrangement outside Messaging Server for automating it.
You can use any kind of program you like to set the ldap attribute "mailuserstatus" to "inactive", or even "deleted" as you wish.
You can use java, "c", or any other programming tools you like. Messaging Server and Directory Server aren't written in Java, anyway.

How to set DB date different from Host date?

Similar Messages

Maybe you are looking for