How to set dialog to tofront with out using modal?

i'm using toFront() method in my application in focusgained & window activated but it is not working on solaris.what to do?

Prepaid cards are not available in New Zealand since the iTMS isn't available there. The only way you could purchase from the iTunes Music Store would be of someone in a country that has one were to purchase a card in that country, send it to you, and allow you to set up an account using their mailing address.

Similar Messages

How to cast vector to vector with out using loop. and how to override "operator =" of vector for this kind of condition.

Hi All How to TypeCast in vector<>... typedef struct ... to class...
//how to cast the vector to vector cast with out using loop
// is there any way?
//================ This is Type Definition for the class of ClsMytype=====================
typedef struct tagClsMytype
CString m_Name;
int m_Index;
double m_Value;
} xClsMytype;
//================ End of Type Definition for the class of ClsMytype=====================
class ClsMytype : public CObject
public:
ClsMytype(); // Constructor
virtual ~ClsMytype(); // Distructor
ClsMytype(const ClsMytype &e);//Copy Constructor
// =========================================
DECLARE_SERIAL(ClsMytype)
virtual void Serialize(CArchive& ar); /// Serialize
ClsMytype& operator=( const ClsMytype &e); //= operator for class
xClsMytype GetType(); // return the typedef struct of an object
ClsMytype& operator=( const xClsMytype &e);// = operator to use typedef struct
ClsMytype* operator->() { return this;};
operator ClsMytype*() { return this; };
//public veriable decleare
public:
CString m_Name;
int m_Index;
double m_Value;
typedef struct tagClsMyTypeCollection
vector <xClsMytype> m_t_Col;
} xClsMyTypeCollection;
class ClsMyTypeCollection : public CObject
public:
ClsMyTypeCollection(); // Constructor
virtual ~ClsMyTypeCollection(); // Distructor
ClsMyTypeCollection(const ClsMyTypeCollection &e);//Copy Constructor
DECLARE_SERIAL(ClsMyTypeCollection)
virtual void Serialize(CArchive& ar);
xClsMyTypeCollection GetType();
ClsMyTypeCollection& operator=( const xClsMyTypeCollection &e);
ClsMyTypeCollection& operator=( const ClsMyTypeCollection &e); //= operator for class
void Init(); // init all object
CString ToString(); // to convert value to string for the display or message proposed
ClsMyTypeCollection* operator->() { return this;}; // operator pointer to ->
operator ClsMyTypeCollection*() {return this;};
public:
vector <ClsMytype> m_t_Col;
//private veriable decleare
private:
//===================================================
ClsMytype& ClsMytype::operator=( const xClsMytype &e )
this->m_Name= e.m_Name;
this->m_Index= e.m_Index;
this->m_Value= e.m_Value;
return (*this);
//==========================Problem for the vector to vector cast
ClsMyTypeCollection& ClsMyTypeCollection::operator=( const xClsMyTypeCollection &e )
this->m_t_Col= (vector<ClsMytype>)e.m_t_Col; // how to cast
return (*this);
Thanks in Advance

Hi Smirt
You could do:
ClsMyTypeCollection* operator->() {
returnthis;};
// operator pointer to ->
operatorClsMyTypeCollection*()
{returnthis;};
public:
vector<ClsMytype>
m_t_Col;//??
The last line with "vector<xClsMytype>
m_t_Col;". It compiles but I doubt that is what you want.
Regards
Chong

How do i reach the photosream with out using icloud?

The details on my iphone been deleted manualy so it's gone on the icloud as well. the thing is that my ipad wasnt conected to the internet so its not been sinced.
I tried to backup the ipad on my computer but still, i cant see the photosream pics that i can see on the i pad itself.
in addition, i dont want to conect my ipad to the internet cause then it can all get lost too..
pls help me!! tnx - shani

shani.as
You have posted your issue in Using Apple Support Communities whose topic is 'How to use this forum software's interface, features and/or how to find what you wish'. It is a relatively low traffic and inappropriate forum for your problem. I will ask our Hosts to move it to iPad (possibly iCloud) where it may get a more rapid response from your fellow users.
CCC

How to display the alv report blocks wise with out using the blocked alv

Hi
How to display the alv report with out using the blocked alv function module.
Thanks
Chinnu

see this Standard Program
RPR_ABAP_SOURCE_SCAN

How can i invoke a file chooser dialog box with out using input type=file

how can i invoke a file chooser dialog box with out using <input type=file> can any one help me mail me to [email protected]

You could use an applet...
Or maybe Javascript has some way to do it.

How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.

How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.
When Charter Tech goes to your site, have them connect the modem up, but do not connect the modem to your iMAC or MacBook Pro. What you want to do is connect the Airport Extreme to the iMac or MacBook Pro first with the Ethernet Cable. You have to do this to configure via Airport Utility to set up the Base Station Name & Base Station Password.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple Tv, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.
WHAT TO DO IF YOUR AIRPORT EXTREME WAS PREVIOUSLY SET UP FOR USE WITH ANOTHER CARRIERS ROUTER OR MODEM.
NOTE: If you already had your Airport Extreme connected for example, I previously had ATT Uverse and the Airport Extreme was connected to the Wireless Router Model 3801HGV, I disabled the Uverse Wireless and used the Airport Extreme for the Wireless signal in bridge mode, as the Airport extreme Signal is much stronger than the Uverse router, and I was able to obtain a Wireless signal with the Airport Extreme way much better with no signal loss which was very very frustrating with the Uverse router.
Anyhow if you had it hooked up like this, now that you will be using it with the Charter ARRIS Modem TM902A, you will need to reset the Airport Extreme to clear out the old data it has in memory, with the previous set up otherwise it will not work. Trust me I spent 6 hours trying to make it work reading all Apple Support Community questions and answers relating to this type issue/problem others have been having trying to get their set up working. I tried all the tips, and I finally decided just to see if by chance I would be able to connect with someone with Charter Tech support who might be familiar with Apple to be able to assist me and by luck I did. He told me why it was not working and was all due the previous configuration with the ATT Uverse router was still in memory with the Airport Extreme. Finally it was 10:30 PM when I decided to call Charter Tech Support and I had been working on this since 3:00 pm pacific. I did not call them earlier as all the post I read said they never received any good help from Charter. After calling them I finished up by 11:00 PM and was able to finally connect Apple Tv, iMac, iPhones and Macbook Pro. We love our Apple Product and Happy all is connected with the new
Internet Provider Charter. I must say the speed is way way much better than it ever was with AT&T Uverse.
THIS IS WHAT YOU WILL NEED TO DO:
First you will need to unplug the Airport Extreme, then by taking the tip of a pen or paper clip end you need to push the reset button on the back of the Airport Extreme and hold it
down and at the same time plug the power cord back into the Airport Extreme count to 5 or 10 then release the reset button. Then once he light in front of the Airport Extreme stops blinking you need to plug the Ethernet cable from the Airport Extreme to your iMAC or Macbook Pro, and restart which ever one you have, then open the Airport Utility once it is back up. If you see airport extreme pop up with the old network name or it shows and yellow triangle click on the Airport Extreme ICON it will not let you configure it but will ask if you want to get rid of it or remove and just do it. Then Again restart your iMAC or MacBook Pro, open up Airport Utility again, and on the top left you should see under “Other Airport Base Stations” the MAC ID for the Airport Extreme.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple TV, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.

I just got a Charter Modem. Model TM822. While I was moving, my Airport Extreme was still at my old place.
I have a Linksys WRT320N I used for the initial Charter setup.
I can get my Airport to work here, but the Internet light on the Modem flashes Yellow.
Hasn't caused any issues so far but one thing I did notice.
On the Linksys there were 3 DNS servers listed.
The Airport Extreme only lists 2 and i don't see where I could add another, only change whats already there.
I tried everything above, but light on modem still flashes yellow.
I have the technicians cell phone. Told me "that shouldn't be" and gave the same advice listed above.
I'll break down and call Charter one day, see if it's on their end. NSA tracking may need a reset LMAO.

How to set up time capsule with BT Infinity

how to set up time capsule with BT Infinity

The easiest and sure way is to use bridge on the TC as the method of connection. The TC then becomes a device in your network and gets its IP from the main router that I presume BT supply.
Method is,
1. Plug the TC WAN port into the BT supplied modem by ethernet.
2. Plug the computer you are using for the setup into the TC by ethernet.
3. Run the airport utility .. go to internet tab on the top menu..
In the bottom option, Connection Sharing choose off (bridged mode)
4. Go to the wireless page and setup wireless connection as you like it.. using whichever band you want. And make sure security is set to the highest setting, wpa2 personal. Put in a decent wireless passkey.
5. Press the update and fix whatever else the TC will show as needing fixing.. usually security stuff.
6. You can then disconnect the ethernet and connect by wireless if you want. Any port on the TC will now be a LAN port, including WAN.
This is assuming BT supply a wireless router with built in vdsl/other type of modem. If so you normally will not be able to bridge the modem, unless BT are using pppoe authentication which they haven't in the past.
If you really need to use the TC as a router then you will need to work out an alternative method. You can double NAT by placing the TC in the DMZ of the BT router if that is an option. It is not without issues in general.

Could anyone please let me know how to set a ICC profile with Acrobat dlls using Csharp or VB

Could anyone please let me know how to set a ICC profile with Acrobat dlls using Csharp or VB

Cant we even use the dlls in an application?
In order to automate Acrobat, you need to have Acrobat installed. There is
nothing you can do with just the DLLs. As was already stated, Acrobat is
not licensed for use on a server, but regardless of that, it's also
not technically suitable for server use. You need to find a solution
outside of Acrobat to solve your problem.
It also seems that you don't have a good understanding of what is going in
inside a PDF file. PDF is a very complex file format, and based on
your questions
and followup questions, you need to spend a considerable amount of time
getting familiar with the PDF file format to understand how color works in
the PDF context. Reader the PDF spec, while paying special attention to the
section about color. You will find out that if you want to convert the
color space of a "PDF file", you actually need to convert the color space
associated with every single object in your PDF file. That is fairly simple
for vector graphic and text, but when it comes to images, you may have to
convert the image data. Once you have a good understanding of what it is
you need to do within the PDF file, then you can start looking for tools
that allow you to do that. Again, Acrobat and therefore the Acrobat SDK is
not suitable for this task. If you want to stay with Adobe products take a
serious look at the PDF Library, which his licensed through Datalogics (
http://www.datalogics.com/products/pdf/pdflibrary/). As you've mentioned,
there are other, non-Adobe PDF libraries that you can also use, but this is
the Acrobat SDK forum, so I won't discuss any of those 3rd party solutions.
You are wasting your time while looking for a simple solution that does not
exist.

How do I view ipod music files with out using I tunes?

I trying to view my Ipod music files without using itunes. But when I conect my Ipod to my pc I can only view contacts, notes, and caladar through the driver.
How do I view ipod music files with out using I tunes?

they should be under ur my music folder if u have windows

HT5137 I made a purchase with my debit card on The Simpson Tapped out game, And now my game won't open. It just kicks me out every time I click on it. How do I fix this problem with out deleting my app?

I made a purchase with my debit card on The Simpson Tapped out game, And now my game won't open. It just kicks me out every time I click on it. How do I fix this problem with out deleting my app?

Personally, I would never use a debit card online, for security reasons. If your card gets hacked its your money that is stolen. At least with a credit card it is the card providers money that is stolen.
Anyway, I would delete the app and re-install. If you paid for the app in the first place you will be able to re-install free of charge. Also, the app should allow the in-app purchase to happen again as it should recognise that you have already purchased it previously.
Finally, it might be that the 3G doesnt have as much ram as more recent models of iphone and you may have applications running in the background that are preventing the app to function with the in-app purchase unless you shut down any apps eating all you memory that are running in the background. Shut-down these apps (and the simpson tap out app) by exiting to your home screen and double-tapping the home button to show what apps are running in the background. press and hold any of the open apps until it starts shaking. close all the apps down. exit then re-launch the app.
good luck.

I have lost my itunes and had to download a new one. how do i sync my iphone with out losing any thing

I have lost my itunes and had to download a new one. how do i sync my iphone with out losing any thing, pics music contacts things like that

I have lost my itunes and had to download a new one. how do i sync my iphone with out losing any thing, pics music contacts things like that

How do i enable my iphone with out itunes

how do i enable my iphone with out itunes how do i enable my iphone with out itunes

You need a WiFi connection to activate the iPhone without itunes on a mac/pc.

I purchased an ablum thru itunes on my phone and it says i purchased the songs on itunes but when i go on my music it says i have to repurchase all the songs how can i get the songs with out havin to pay again

I purchased an ablum thru itunes on my phone and it says i purchased the songs on itunes but when i go on my music it says i have to repurchase all the songs how can i get the songs with out havin to pay again

Whether you can redownload music depends upon what country that you in. If you are using your computer's iTunes then does music show in the Purchased link under Quicklinks on the right-hand side of the iTunes store home page (on your phone you might be able to redownload media via the Purchased tab in the iTunes store app) ? If music shows there, but not that album, then check to see if it's hidden : http://support.apple.com/kb/HT4919
If you aren't in a country when you can redownload music and it's still on your phone then you should be able to copy it over from the phone via File > Devices > Transfer Purchases.

I have a friend who was going to sync her phone with my computer to get the new update.. how do i add her phone with out her losing everything on her phone and not getting all my info on her phone..

i have a friend who was going to sync her phone with my computer to get the new update.. how do i add her phone with out her losing everything on her phone and not getting all my info on her phone..

First, create a separate login on your computer for your friend. Do this BEFORE you do anything else. Next, make sure iTunes is up to date. Then:
1. Disable auto sync when an iPod/iPhone is connected under Preferences>Devices in iTunes.
2. Make sure you have one contact & one event in the supported applications(Address Book, iCal) on your computer. These entries can be fake, doesn't matter, the important point is that these programs not be empty.
3. Connect her phone, iTunes running, do not sync at this point.
4. Store>Authorize this computer.
5. File>Transfer Purchases(To make sure all purchased content on her phone will be in her itunes library).
6. Right click in the device pane & select reset warnings.
7. Right click again and select backup.
8. Right click again & select restore from backup, select the backup you just made. When prompted to create another backup, decline.
9. This MUST be followed by a sync to restore her itunes content, which you select from the various tabs, You'll get a popup regarding her contacts & calendars asking to merge or replace, select merge.
You should be good to go.

How can i get new apple id with out using credit card or visa card

how can i get a new apple id with out using credit card or visa card?

Hi xianlycier06,
If you are looking to create an Apple ID without using a credit card, you may find the following article helpful:
Apple Support: Creating an iTunes Store, App Store, iBooks Store, and Mac App Store account without a credit card
http://support.apple.com/kb/HT2534
Regards,
- Brenden

How to set dialog to tofront with out using modal?

Similar Messages

Maybe you are looking for