How do i reach the photosream with out using icloud?
The details on my iphone been deleted manualy so it's gone on the icloud as well. the thing is that my ipad wasnt conected to the internet so its not been sinced.
I tried to backup the ipad on my computer but still, i cant see the photosream pics that i can see on the i pad itself.
in addition, i dont want to conect my ipad to the internet cause then it can all get lost too..
pls help me!! tnx - shani
shani.as
You have posted your issue in Using Apple Support Communities whose topic is 'How to use this forum software's interface, features and/or how to find what you wish'. It is a relatively low traffic and inappropriate forum for your problem. I will ask our Hosts to move it to iPad (possibly iCloud) where it may get a more rapid response from your fellow users.
CCC
Similar Messages
-
I purchased an ablum thru itunes on my phone and it says i purchased the songs on itunes but when i go on my music it says i have to repurchase all the songs how can i get the songs with out havin to pay again
Whether you can redownload music depends upon what country that you in. If you are using your computer's iTunes then does music show in the Purchased link under Quicklinks on the right-hand side of the iTunes store home page (on your phone you might be able to redownload media via the Purchased tab in the iTunes store app) ? If music shows there, but not that album, then check to see if it's hidden : http://support.apple.com/kb/HT4919
If you aren't in a country when you can redownload music and it's still on your phone then you should be able to copy it over from the phone via File > Devices > Transfer Purchases. -
How do you unlock the volme with out the code
how do you unlock the volme with out the code
You can't. If you do not know the volume passcode, your only option is to connect the iPod to your iTunes library and restore it to factory settings.
B-rock -
Deletion of duplicates in the table with out using rowid
How can I delete duplicates in the table with out using ROWID .
hi
sleect count(coulmnname),columnname from table
group by columnname
having count(columnname) > 1;
find the primary key of the table
apply the below query
delete from table
where (primary key,repeated column name )
not in
( select min(primary key), repeated column
from employee group by repeated column );
use this in the primary key column use empid ,,,the repated column is ename
empid ename
1 sankar
2 sankar
try this one -
How to know the size of the string with out using the length() method
i want to find the lenght of the
String s="Sudha";
with out using the lenght() method.Not true (I mean the part about "The only String
call"). But if it had been true, I might haveagreed
with this:
Assuming one uses the 'exception' approach thenwhat
method other than charAt() is needed?I probably misunderstood your post, I thought you
meant that the only alternative to length() would be
charAt() and catching the exception.There are many ways and if the teacher had said find 5 ways of finding the length of a String then I would have fealt happier because it would have meant the student would have to read and study the whole of the String API.
I like
int length = (s+"sabre").lastIndexOf("sabre"); -
Hi All How to TypeCast in vector<>... typedef struct ... to class...
//how to cast the vector to vector cast with out using loop
// is there any way?
//================ This is Type Definition for the class of ClsMytype=====================
typedef struct tagClsMytype
CString m_Name;
int m_Index;
double m_Value;
} xClsMytype;
//================ End of Type Definition for the class of ClsMytype=====================
class ClsMytype : public CObject
public:
ClsMytype(); // Constructor
virtual ~ClsMytype(); // Distructor
ClsMytype(const ClsMytype &e);//Copy Constructor
// =========================================
DECLARE_SERIAL(ClsMytype)
virtual void Serialize(CArchive& ar); /// Serialize
ClsMytype& operator=( const ClsMytype &e); //= operator for class
xClsMytype GetType(); // return the typedef struct of an object
ClsMytype& operator=( const xClsMytype &e);// = operator to use typedef struct
ClsMytype* operator->() { return this;};
operator ClsMytype*() { return this; };
//public veriable decleare
public:
CString m_Name;
int m_Index;
double m_Value;
typedef struct tagClsMyTypeCollection
vector <xClsMytype> m_t_Col;
} xClsMyTypeCollection;
class ClsMyTypeCollection : public CObject
public:
ClsMyTypeCollection(); // Constructor
virtual ~ClsMyTypeCollection(); // Distructor
ClsMyTypeCollection(const ClsMyTypeCollection &e);//Copy Constructor
DECLARE_SERIAL(ClsMyTypeCollection)
virtual void Serialize(CArchive& ar);
xClsMyTypeCollection GetType();
ClsMyTypeCollection& operator=( const xClsMyTypeCollection &e);
ClsMyTypeCollection& operator=( const ClsMyTypeCollection &e); //= operator for class
void Init(); // init all object
CString ToString(); // to convert value to string for the display or message proposed
ClsMyTypeCollection* operator->() { return this;}; // operator pointer to ->
operator ClsMyTypeCollection*() {return this;};
public:
vector <ClsMytype> m_t_Col;
//private veriable decleare
private:
//===================================================
ClsMytype& ClsMytype::operator=( const xClsMytype &e )
this->m_Name= e.m_Name;
this->m_Index= e.m_Index;
this->m_Value= e.m_Value;
return (*this);
//==========================Problem for the vector to vector cast
ClsMyTypeCollection& ClsMyTypeCollection::operator=( const xClsMyTypeCollection &e )
this->m_t_Col= (vector<ClsMytype>)e.m_t_Col; // how to cast
return (*this);
Thanks in AdvanceHi Smirt
You could do:
ClsMyTypeCollection* operator->() {
returnthis;};
// operator pointer to ->
operatorClsMyTypeCollection*()
{returnthis;};
public:
vector<ClsMytype>
m_t_Col;//??
The last line with "vector<xClsMytype>
m_t_Col;". It compiles but I doubt that is what you want.
Regards
Chong -
I get this message: "Client host rejected: cannot find your reverse hostname. [17.110.78.42]". The recipient domain is ptd.net and this is coming from an iCloud account. PTD refused to help. Is this an Apple problem? When can this be fixed? I have an email account that is rejected by half of the recipients!
Thanks, but I've been on the phone with AppleCare US (where I am and live) and AppleCare UK. They continue bouncing me back and forth without helping resolve the problem.
Perhaps someones knows how to further escalate the issue at Apple? -
I bought an album and some songs didnt download and there wanting me to re but then help me?
Downloading past purchases from the App Store ... - Support - Apple
-
How can i locate my iphone with out an icloud id..?
How can i locate my iphone without an icloud account, i cant set one up because i dont have my iphone.
What To Do If Your iDevice Is Lost Or Stolen
If you activated Find My Phone before it was lost or stolen, you can track it only if Wi-Fi is enabled on the device. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
1. Reporting a lost or stolen Apple product
2. Find my lost iPod Touch
3. AT&T. Sprint, and Verizon can block stolen phones/tablets
4. What-To-Do-When-Iphone-Is-Stolen
5. What to do if your iOS device is lost or stolen
6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
7. Find My iPhone
8. Report Stolen iPad | Stolen Lost Found Online
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
1. Find My iPhone
2. Setup your iDevice on iCloud
3. OS X Lion/Mountain Lion- About Find My Mac
4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices) -
How to set dialog to tofront with out using modal?
i'm using toFront() method in my application in focusgained & window activated but it is not working on solaris.what to do?
Prepaid cards are not available in New Zealand since the iTMS isn't available there. The only way you could purchase from the iTunes Music Store would be of someone in a country that has one were to purchase a card in that country, send it to you, and allow you to set up an account using their mailing address.
-
How to include Logs/log4j in SOA with out using java embedding activity
Hi,
I have a requirement where I need to log the values of a particular variable and need to store it in a new log file. Is there any way to log the details with out using java embedding activity.
Thanks,You can try this.
http://veejai24.blogspot.co.uk/2008/04/simple-way-to-implement-log4j-in-your.html
Thanks,
Vijay -
How to Execute sql query in PL/SQL ( a variable) with out using Cursor or REF cursor
Hi
I am building a dynamic query based on some conditions
as an example
v_query varchar2(2000);
x1 varchar2(20);
y1 varchar2(20);
z1 varchar2(20);
v_query := ' Select x,y,z into x1,y1,z1 From ... ';
Is there any way to execute the query with out using cursor or ref cursor..
Thanks
ArunBoth Tod and Eric provided valid responses given the format of the queory you supplied. Howver, if you want to use dynamic sql in either way, you need to be absolutely certain that your query will always only return a single row (e.g. SELECT COUNT(*) FROM mytable), because if it retuns more than one, your procedure will break unless you have an exception handler to handle either TOO_MANY_ROWS or OTHERS.
If you want to pull in a lot of data without walking a cursor, you should look at the BULK COLLECT options. -
How to find out how many recourds in recourd set with out while loop
hi
i want to findout how many recourds in recourd set
with out useing any loops like
while(rs.next())
count+=1;
like this
any mathod like(RecoundCount like )
pls help me
regards
kedarIf you dont want to use a scrollable result set do
sql="SELECT COUNT(*) AS COUNT FROM TABLE"
rs=stmt.executeQuery(sql);
rs.next()
count=rs.getString("COUNT"); -
Develope a report with out using alv
REPORT OBJECT:
The report to list the material quantities returned because of breakage or expiry date or for any other reason.for material the quantities are summed up
under expiry quantity ,breakage and other quantity for a particular month.
above mentioned is the object of my report .
please help me any one to develop the report with out using ALV'S.Hello Pravardhan
Your requirements are definitely demanding for an ALV list because all the calculations can be done by the user himself without any programming. The only thing you need to do is to collect all necessary data. In addition, all criteria for calculating subtotals/totals (e.g. month) must be available as separate column on the ALV list.
This is reasonable programming, anything else not. If the users have an ALV list they can easily adjust the layout to their specific needs without calling for a developer.
We should always develop our programs with a <b>strong focus on the user's perspective</b>.
Regards
Uwe -
I made a purchase with my debit card on The Simpson Tapped out game, And now my game won't open. It just kicks me out every time I click on it. How do I fix this problem with out deleting my app?
Personally, I would never use a debit card online, for security reasons. If your card gets hacked its your money that is stolen. At least with a credit card it is the card providers money that is stolen.
Anyway, I would delete the app and re-install. If you paid for the app in the first place you will be able to re-install free of charge. Also, the app should allow the in-app purchase to happen again as it should recognise that you have already purchased it previously.
Finally, it might be that the 3G doesnt have as much ram as more recent models of iphone and you may have applications running in the background that are preventing the app to function with the in-app purchase unless you shut down any apps eating all you memory that are running in the background. Shut-down these apps (and the simpson tap out app) by exiting to your home screen and double-tapping the home button to show what apps are running in the background. press and hold any of the open apps until it starts shaking. close all the apps down. exit then re-launch the app.
good luck.
Maybe you are looking for
-
Help - column that would show col A or Col B val based on presentation var
We are having difficulty in getting this to work. Here is what we have in the column formula: CASE WHEN @{variables.nabc}='Mgmt $' THEN SR_QUOTA_ACHIV_AGGR.MGMT_DOLLARS_MTD_AMT ELSE SR_QUOTA_ACHIV_AGGR.LGL_DOLLARS_MTD_AMT We get Syntax error. The var
-
My iPod mini is not recognized in iTunes 7...but it recognized by Windows and this problem persists on all computers which makes me think it's the software on my iPod since it plays perfectly and charges up every time. I have tried the following: 1.
-
Landed costs with several vendors
Hi All, I read in the Help File documentation that it is possible to add several vendors to a landed costs posting. P.e. an invoice concerning the handlingcosts and another invoice concerning the transport of the same shipment.(the goods receipts are
-
Importing EDLs and Reconnecting Media... Who can answer this question?
Hi, happy holidays! What am I missing here: I have an EDL with in and out points from a number of different source files. I import the EDL in Final Cut Pro as a sequence. I click on the sequence. The edit decisions can be seen in the timeline, with a
-
URGENT!These errors shutdown one server in cluster.
Hi, We are getting following errors in our portal which ultimately shutdown one server in the cluster. Can anybody help? Fri Mar 08 13:28:40 SGT 2002:<I> <JDBC Pool commercePool> A connection from pool commercePool was tested during reserve with a se