How to set field attributes type such as enumeration / boolean / text in Search UIBB when creating search creatria dynamically using default_config?

Hi Experts !
I am trying to build search UIBB where I need to configure the search criteria dynamically in the IF_FPM_GUIBB_SEARCH~GET_DEFAULT_CONFIG method.
Please can anyone tell me is it possible to set the attribute types in dynamic configuration .... because I need to create a drop down field in the selection screen.
Thanks !

Was it really necessary to post the whole API description?!?
Locale[] locales = Locale.ENGLISH();ENGLISH is not a method in class Locale, so do not add the braces "( );".
Also, the constant ENGLISH is not an array, but just a single Locale object.
You didn't say what your problem was. What do you want to achieve with your program and what is it that you don't understand?

Similar Messages

How to set field type choice using csom (c#)

I have a field type: Choice (menu to choose from) which is not multichoice. How do I set a value?
I have found code for multiple choice but it doesn't seem to work for single choice.

Hi,
The following code snippet for your reference:
newListItem["ChoiceFieldName"] = "ChoiceValue";
newListItem.Update();
clientContext.Load(newListItem);
clientContext.ExecuteQuery();
If you are assigning a Value which is not in the Choice Column, You need to create a choice value then assign it to the item.
More information is here:
http://sharepoint.stackexchange.com/questions/124999/how-to-set-field-type-choice-using-csom-c
Best Regards
Dennis Guo
TechNet Community Support

Dynamically setting field attributes based on input

Hi all,
I am trying to see if it is possible to dynamically set field attributes depending on other fields. For example, in screen 1100 of IQ01, I want to make it so that "Certification number" becomes mandatory if "certification status" = 1, and becomes optional if "certification status" = 2,3 or 4.
Is this possible? If so, how?
Regards,
D.

Have you checked this
http://help.sap.com/saphelp_nw70/helpdata/en/9f/dbab6f35c111d1829f0000e829fbfe/content.htm
if your requirement is to do this in Tcode IQ01 then the above answer is not sufficient
Edited by: Abhishek Jolly on Aug 15, 2008 5:41 PM

How to set field alignment in a table in jdev 11.1.2.3?

hi,
How to set field alignment in a table in jdev 11.1.2.3?
eg: to diplay a number field in a table as right aligned.
I have tried to set field(amount) VO UI Hint Format Type:Number; Format: 0000.00
and jspx as flowing, but it doesnot work.
Thanks.
bao
<af:column sortProperty="#{bindings.VO1.hints.Amount.name}"
sortable="true"
headerText="#{bindings.VO1.hints.Amount.label}"
id="c44" width="60"
align="center">
<af:inputText value="#{row.bindings.Amount.inputValue}"
label="#{bindings.VO1.hints.Amount.label}"
required="#{bindings.VO1.hints.Amount.mandatory}"
columns="#{bindings.VO1.hints.Amount.displayWidth}"
maximumLength="#{bindings.VO1.hints.Amount.precision}"
shortDesc="#{bindings.VO1.hints.Amount.tooltip}"
id="it58"
secret="false"
inlineStyle="text-decoration:overline;">
<f:validator binding="#{row.bindings.Amount.validator}"/>
</af:inputText>
</af:column>

Works for me:
        <af:column sortProperty="#{bindings.EmployeesView1.hints.Salary.name}" sortable="false"
                   headerText="#{bindings.EmployeesView1.hints.Salary.label}" id="c7" align="right">
          <af:inputText value="#{row.bindings.Salary.inputValue}" label="#{bindings.EmployeesView1.hints.Salary.label}"
                        required="#{bindings.EmployeesView1.hints.Salary.mandatory}"
                        columns="#{bindings.EmployeesView1.hints.Salary.displayWidth}"
                        maximumLength="#{bindings.EmployeesView1.hints.Salary.precision}"
                        shortDesc="#{bindings.EmployeesView1.hints.Salary.tooltip}" id="it6">
            <f:validator binding="#{row.bindings.Salary.validator}"/>
          </af:inputText>
        </af:column>JDeveloper 11.1.2.3
Salary is shown right-aligned.
What happens if you get rid of your inlineStyle on the af:inputText

How to set two attributes as a primary key in database ?

how to set two attributes as a primary key?
Take COffeesbreak as an example ,
let's suppose that there are cof_name ,sup_id,price and so on;
the same cof_name may be suplied by more sup_ids,
and one sup_id may suply more cof_names.
so the Primary key should be set the cof_name and sup_id ,
how to set ?
(of course that i konw if I set a cof_id,the problem will be easy work out
but now there are those like above)
I set that as following:
create table coffees (cof_name VARCHAR(32) PRIMARY KEY,sup_id INTEGER, PRIMARY KEY,PRICE INTEGER )
THE database print error :cant add more primary keys!
thanks in advance

You can only use the PRIMARY KEY declaration on a column if it is the only Primary Key column.
Use the PRIMARY KEY constraint statement instead.
create table coffees (
cof_name VARCHAR(32),
sup_id INTEGER,
PRICE INTEGER,
PRIMARY KEY ( cof_name ,sup_id )
)Dave

How to set field to blank if the data is # or unassigned

hi experts,
how to set field to blank if the data is # or unassigned?
thx

Hi
add the following macro to your workbook (template workbook):
Sub SAPBexonrefresh(qstring As String, resultArea As Range)
    For Each c In resultArea
        If LCase(c.Value) = "not assigned" Then c.Value = ""
       Next
End Sub

How to set field value in workflow SPD2013?

Hi All,
how to set field value in workflow SPD2013? Actually using Infopath, i need to update a field value through workflow.(Little differnt from SPD2010). How to do this?

As Amit says, some elaboration here would be good. You can use InfoPath as a form for either a list or a library and then set it to trigger a workflow upon item creation. The workflow will consist a number of actions, one of which is the Update
Field Item.
More information on the available steps can be seen here.
http://msdn.microsoft.com/en-us/library/office/jj164026.aspx
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

How to set an attribute while creating an XML?

Hi All,
I am required to create an XML in the following manner :
here <ITEMS ITEMCOUNT="2"> where ITEM is an element and itemcount=2 is the attribute which means their are 2 line items
- <HEADER>
<PR_NO>sap pr no</PR_NO>
<REVISION_NO>0</REVISION_NO>
</HEADER>
- <ITEMS ITEMCOUNT="2">
- <ITEM>
<PR_LINE_NO>1</PR_LINE_NO>
<ITEM_DESCRIPTION>Security Locks</ITEM_DESCRIPTION>
</LOCATIONS>
</ITEM>
</items>
Please suggest how to set the attribute ITEMCOUNT?
Thanks,
Lina

I am also trying to do something similar to this. I tried the suggestion given but it still only allows 1 parameter. A snippet of my .icd file is below.
Attribute (ROI Settings) {
Value (Integer) {
Min (0)
Max (79)
Increment (1)
Display {
Multiplier (8.000000)
Offset (0.000000)
Precision (0)
Units (Pixel)
Default (0, 0, 0, 0)
Current (0, 0, 0, 0)
Action (Serial) {
Command (ROI %d, %d, %d, %d\r)
Response ()
Timeout (1000)
Delay (100)
Any answer or help is appreciated.
Thanks,
Bruce

How to set default file type for Open dialog

Dear my friends,
I am using "At selection-screen ON VALUE-REQUEST FOR filepath" to display open dialog and i want to set default file type for open dialog = *.txt.
Thank your times !

Hello,
U can make use of this code:
AT SELECTION-SCREEN ON VALUE-REQUEST FOR SP_FILE.
PERFORM SAVE_DIALOG CHANGING SP_FILE G_F_RC.
FORM SAVE_DIALOG CHANGING PO_FILE PO_RC.
DATA: L_VA_BOXTITLE     TYPE STRING,
        L_VA_DEFAULTFILE TYPE STRING,
        L_VA_DEFAULTNAME TYPE STRING,
        L_VA_DEFAULTPATH TYPE STRING,
        L_VA_DEFAULTFULL TYPE STRING,
        L_VA_FILTERTEXT   TYPE STRING,
        L_VA_CODE         TYPE I.
CLEAR: PO_RC, G_F_CONF.
L_VA_BOXTITLE   = TEXT-B01.
L_VA_FILTERTEXT = TEXT-B02.
IF PO_FILE IS INITIAL.
    CLEAR L_VA_DEFAULTFILE.
ELSE.
    L_VA_DEFAULTFILE = PO_FILE.
ENDIF.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_SAVE_DIALOG
    EXPORTING
      WINDOW_TITLE            = L_VA_BOXTITLE
      DEFAULT_EXTENSION       = 'TXT'
      DEFAULT_FILE_NAME       = L_VA_DEFAULTFILE
      FILE_FILTER             = L_VA_FILTERTEXT
      INITIAL_DIRECTORY       = 'C:SAPWorkdir'
    CHANGING
      FILENAME                = L_VA_DEFAULTNAME
      PATH                    = L_VA_DEFAULTPATH
      FULLPATH                = L_VA_DEFAULTFULL
      USER_ACTION             = L_VA_CODE
    EXCEPTIONS
      CNTL_ERROR              = 1
      ERROR_NO_GUI            = 2
      OTHERS                  = 3.
IF SY-SUBRC <> 0.
    PERFORM CHECK_ERRORTYPE(Z48M_MATDATA_UP) CHANGING SY-MSGTY.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
               WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    CLEAR PO_FILE.
    EXIT.
ENDIF.
IF L_VA_CODE NE 0.
    MESSAGE S818(3F) WITH TEXT-011.
    CLEAR: PO_FILE, PO_RC.
    EXIT.
ELSE.
    WRITE L_VA_DEFAULTFULL TO PO_FILE.
    G_F_CONF = G_C_XFELD.
ENDIF.
ENDFORM.                    " save_dialog
If useful reward.
Vasanth

How to Set Up TextEdit as an HTML or Plain Text Editor?

How to Set Up TextEdit as an HTML or Plain Text Editor?

Well,
There are 5 choices to choose from on the page. In the description of the choices at the bottom of the page there are 7, and the two additional choices talk about having to first have registered the site with SSO. So...I'm interpreting that as meaning that other 2 possible choices would be displayed if the site is registered with SSO. That, plus the fact that the page which describes how to add the site to SSO seems to think that the SSO choices are displayed in the wizard.
So, no, there's no "exact launguage" that says what the reason is for the choices not being displayed. Can you point me to some exact language that tells me how to get those choices displayed?

How to set different nr of e.g dia wp for different op.modes when in instan

I wander how to set different nr of e.g dia wp for different op.modes when in instance profile the nr of wp is fixed.
thx in advance

yes u can create the operation mode by using tcode rz04. the steps are:-
1) run the tcode :- rz04
2: select the operation mode then click on create instance (create ur instanace for eg :- day mode and night mode)
3)click on operation mode select the timetable then select normal operation(24 hr)->assign the modes (means select the time by double click and then right click on that select assign and give the mode eg:- day mode ) same way give another modes.Incase if there is any problem then please let me know.
4)go to back -> click on instance/operation mode ->select create new instance->give the host name & click on current setting and save it the diaglog window will appear give the operation mode name eg day mode then if you want to increase or decrease the work process by cliking on + and - tab u can change it after that save it the WP authorization some kind of this window will appear click on yes then new instance mode will appear give the instance name eg night mode then save it again dialog window will appear do changes in work process according to ur requriement and click on save again the same wp window will appear if u want to add more operation mode then click yes either no then save it . Now u will able to see ur all operation modes.
operation mode setup
http://help.sap.com/saphelp_nw70/helpdata/EN/c4/3a5e76505211d189550000e829fbbd/content.htm
Operation Mode Switches
http://help.sap.com/saphelp_nw04/helpdata/en/c4/3a5f1f505211d189550000e829fbbd/content.htm
Note 39412 - How many work processes to configure
cheers
dEE

How do I get bing off my mac. Safari keeps defaulting to Bing when I search. Thank you. Peter Morse

How do I get bing off my Mac. Safari keeps defaulting to Bing when I search. Thank you.

You installed the "Genieo" search-hijacking rootkit. There is an uninstaller, but as the developer is dishonest, you can't use it. I suggest the tedious procedure below to disable Genieo.
Back up all data. You must know how to restore from a backup even if the system becomes unbootable. If you don't know how to do that, or if you don't have any backups, stop here and ask for guidance.
Step 1
Triple-click anywhere in the line below on this page to select it:
/etc/launchd.conf
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.
If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
A folder may open with a file selected, or the file may not exist, in which case you'll get a message that it can't be found. If it does exist, it's a configuration file created or replaced by the Genieo installer. Any software installer that does this should be considered ipso facto malware. Move the file to the Trash. You'll be prompted for your administrator password. Then restart, empty the Trash, and continue as below.
IMPORTANT: If the launchd.conf file exists, you must move it to the Trash and restart before continuing. Otherwise the system may become unbootable. In that case, restore from your backup and start over. That's how badly Genieo has sabotaged your system. If you're not completely sure you can complete this step, stop here and ask for guidance.
Some variants of Genieo don't include the launchd.conf file. The absence of that file doesn't mean that Genieo is not installed.
Step 2
Quit the Genieo application, if it's running. Force quit if necessary.
Move each of these items to the Trash in the same way as above:
/Applications/Genieo.app
/Applications/Uninstall Genieo.app
/Library/Frameworks/GenieoExtra.framework
/Library/LaunchAgents/com.genieo.engine.plist
/Library/LaunchAgents/com.genieoinnovation.macextension.plist
/Library/LaunchDaemons/com.genieoinnovation.macextension.client.plist
/Library/PrivilegedHelperTools/com.genieoinnovation.macextension.client
/usr/lib/libgenkit.dylib/usr/lib/libgenkitsa.dylib
/usr/lib/libimckit.dylib
/usr/lib/libimckitsa.dylib
There's no need to restart after each one. Again, some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
Restart and empty the Trash. Don't try to empty the Trash until you have restarted.
Your web browser(s) should now function normally, and you should be able to reset the home page and search engine. If not, stop here and post your results.
Step 3
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including ones called "Genieo" or "Omnibar," and any that have the word "Spigot" or "InstallMac" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
This procedure may leave a few files behind, but it should deactivate Genieo. Make sure you don't repeat the mistake that led you to install it. Chances are you got it from one of the Internet's open sewers such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site.
Finally, be forewarned that when Genieo is mentioned on this site, the developer sometimes shows up under the name "Genieo support." If that happens, don't believe anything he says, but feel free to tell him what you think of his scam.

How to set field "vendor" as optional for movement type 221

Hello experts, I want to set the field "Vendor"(LIFNR) as optional for movement type 221 when create reservation using T-code MB21. As far as I know, field selection of reservations is determined by the settings in the field selection(from201) of the movement type. But even when I have set the field "Vendor" as "optional" both in field selection (from 201) and field selection (Enjoy) for mvt 221 using T-code OMJJ, it is still not shown on the screen of creating reservation. Is it the SAP inside logic that restrict this field for movement type 221 or should I change any other settings elsewhere?
Any help will be highly appreciated.
Best regards!

Let me understand ,
u want to reserve stock with MB21 with optional for vendor code or name .
then against the reservation u was t to issue to cost centre or production with 201 rt .
If so hopefully this scenario excludes the normal production order process ( cozz their GI is w.r.t prd order only since reservation is created at backend and also shown in prod order).
ur req is normally for consumables or spares etc and u want o track the vendor also in the Reservation .
possible check is Movement type - screen in omjj
GL account variant settings
MB1a setting
last option - create a screen variant with SHDO tode and activate it .
all will be at client level so please

How to set a attribute value of a sub node binded to a table.. pls respond.

Hi friends,
I have context defined like this.
     Head_node ( table 1)
          Item_node ( table 2, sub node ). ( now this im saving in global internal table).
so now when i hit save button, im passing my internal table (it has col1- sales order no, col2 item details(table type, which can have more than one record) to a FM, to create sales order.
My sales order is getting saved.
But the function module will return some new values (like sales order number, item number etc).
Now i want these values to be updated in my context.
Meaning whenever after that i do get_attribute, i should get these new (sales order no, item no ) also.
I dont know how to set the context values of sub nodes , so im missing these values.
kindly respond back to me..
thanks in advance,
Niraja

Its very simple.
Follow these steps. e.g you want to get the new sales order number. Define a attribute in ur node (or set of attributes in ur case as per reqruirement) say new_so_number.
Check your FM, if its returning new_so_number then it's fine, otherwise you have to change the FM to return the new_so_number or you have to get from db table somehow, which best suites your req.
So once you have new_so_number after calling the FM, say in lv_new_so_number field. Then write this code to set the attribute (change the variables as per your context attributes)
DATA lo_nd_head TYPE REF TO if_wd_context_node.
DATA lo_el_head TYPE REF TO if_wd_context_element.
DATA ls_head TYPE wd_this->element_head.
DATA lv_new_so_number LIKE ls_head-new_so_number.
* navigate from <CONTEXT> to <HEAD> via lead selection
lo_nd_head = wd_context->get_child_node( name = wd_this->wdctx_head ).
* get element via lead selection
lo_el_head = lo_nd_head->get_element( ).
lv_new_so_number = new_so_number. " (You got this as a exporting parameter of FM etc..)
* get single attribute
lo_el_head->set_attribute(
    EXPORTING
      name = `NEW_SO_NUMBER`
      value = lv_new_so_number ).
Hope it works.

How to set session attributes in a bean?

How do I set a session attribute in a server-side bean?
I'm not sure if I asked the question the right way. What I meant is, while it's easy to set session attributes in a JSP page (session.setAttribute("sessionname", "sessionvalue")), I'd want to set such an attribute within a server-side bean defined in this web application. But what is the syntax for doing it?

Here a simple bean that stores something in the session and retrieves something from it.
import javax.servlet.http.HttpSession;
public class TestBean {
private String value;
public void doSomething(HttpSession session, int a, int b) {
    if (a+b > 0) {
      session.setAttribute("ab",Boolean.TRUE);
    } else {
      session.setAttribute("ab",Boolean.FALSE);
public void init(HttpSession session) {
    if (session != null) {
      Boolean b = (Boolean)session.getAttribute("ab");
      if (b == Boolean.TRUE) {
        value = "a + b is greater than zero";
      } else {
        value = "a + b is not greater than zero";
    } else {
      value = "no session";
public String getValue() {
    return value;
}In your JSP, use something along the lines of :
<%
TestBean bean = new TestBean();
bean.init(session);
bean.doSomething(session,1,2);
%>If your bean only lives during one request, you can pass the session to the constructor, which stores it in a private variable. This saves passing the session each time.
Hope this helps,
--Arnout

How to set field attributes type such as enumeration / boolean / text in Search UIBB when creating search creatria dynamically using default_config?

Similar Messages

Maybe you are looking for