How to set "from" field in Versamail 4.0.1 EAS / Palm Centro Verizon

I have set up a Palm Centro to sync via Activesync using Versamail 4.01.00. All seems to be working normally but there doesn't seem to be a place to set the senders proper first and last name as the sender. When I send an outbound message the recipient receives the message from login "username" instead of "Firstname Lastname". Anyone know where to change this?
Thanks,
Rob
Post relates to: Centro (Verizon)

Check under Preferences / Reply Options
Post relates to: Treo 700p (Verizon)

Similar Messages

How to set from field in template

Hi all,
We are using templates that always should be SentOnBehalfOf but as you can imagine it is often forgotten to change the from field ...
Is there a way to set the from field to a pre-defined value? I don't get it done. Thanks for any suggestion.

Glad to hear that you found the solution. Thank you for sharing it here, it will be helpful to other community members who encounter similar problem.
Cheers,
Steve Fan
TechNet Community Support

How to set Character field's Format Mask?

dear all,
how to set Character field's Format Mask?
i searched the forum and found the following, where can i use this code and how to change and set its format mask.
SRW.SET_FORMAT_MASK('mask');
Thanks
Muhammad Nadeem

Nadeem,
If you have database 10g, look into function REGEXP_REPLACE. Otherwise you can also try this (you might already know).
SELECT SUBSTR('CHHOCMIPO07020001', 1,2)||'-'||SUBSTR('CHHOCMIPO07020001' ,3,2)||'-'||
SUBSTR('CHHOCMIPO07020001' , 5,2)||'-'||SUBSTR('CHHOCMIPO07020001' , 7,3)||'-'||
SUBSTR('CHHOCMIPO07020001' , 10,2)||'-'||SUBSTR('CHHOCMIPO07020001' , 12,2)||'-'||
SUBSTR('CHHOCMIPO07020001' , 14,4)
FROM dual
CH-HO-CM-IPO-07-02-0001
If you have to use this at many places, create a function, pass the raw value, manipulate the string and return.
FS

How to set the field non-editable in the classical report..

Hi..
How to set the field non-editable in the classical report..

Hi experts,
For the component 'ICCMP_EMP_SRCH' there is a view 'BUPAEMPSEARCH' , which has 2 context nodes 'CUSTOMER' AND 'SEARCHEMPLOYEE' , i need to add the field 'NICKNAME' which is part of the 'CUSTOMER' context node on the search screen. Currrently all the fields on the screen screen are from the 'SEARCHEMPLOYEE' context node. when i did the configuration , the 'NICKNAME' field is greyed out . I have already generated the Getter ,Setter , GET_I, GET_M methods for the 'NICKNAME' field and the context node and controller class and context class are all active .
on debugging the GET_I method, i see that rv_disabled = 'TRUE' and the current = collection_wrapper->get_current( ) is returning empty value .
for this rv_disabled to be set false , the code below is not triggered since there is no value in current.
IF current->is_property_readonly(
'NICKNAME' ) = abap_false. "#EC NOTEXT
rv_disabled = 'FALSE'.
ENDIF.
when i check for other search fields of context node 'SEARCHEMPLOYEE' , all the fields are set to rv_disabled = 'FALSE'.
can anyone suggest how to approch this. iam i missing any binding between context nodes or any activations ?
The field properties are set as Input field and the display checkbox is not checked.

How to set key fields in a Database view

Hi guru's
iam balaji,plz guide me with how to set key fields in a view.......that field is a non key field in the base table....
thanks in advance,
Balaji.S

take a look at this:
Diagnosis
    In the view, not all of the mandatory fields were included as key
    fields. The key of the view therefore is not unique.
System Response
    All the fields are regarded as key fields in order to guarantee that th
    key lengths are unique.
Procedure
    For views with a large number of fields, this could have a negative
    effect on the performance for the language construction described below
    In this case, all the mandatory key fields should be included in the
    view.
regards

How to set the field SKB1-FDLEV as requestred-entry in G/L Master data?

Hi All,
Could anyone tell me how to set the field SKB1-FDLEV as requestred-entry in G/L Master data?
Thanks
Gandalf

hi
Go to OB26
select Your criteria ( create, change or display)
double click on it
again double click on Bank/financial details
there you will find the Planning level make it require entry
save
with regards
ramanuja chary

How to set "like" field of the query in statements

Hi,
Im trying to set the "like" field of the statement.but it is not executing as expected.Could anybody please tell me,"how to set the like field in statements.
Here is my code.
PreparedStatement psum=con.prepareStatement("select count(bill_amount) from master where bill_date like ? and whos_bu=?");
String myStr=month+"/??/"+year;
psum.setString(1,myStr);
psum.setString(2,employeeTray[1]);
ResultSet rs=psum.executeQuery();

Tnx a lot vidyut .using % is working.
Could you plz tell me why the previous one using question mark is not
working. using quesion mark is correct as per the query syntax.and also i tried with asterisk,it is also not working.
ps:have some duke dollars.

HCM F&P - How to set the field as Required based on drop down values

Hi Experts,
I have a requirement to set the Date field as mandatory when a particular value is selected in drop down list. I have already tried with MessageBox though it displays the error message but process moves further i.e. on clicking Check & Send button it throws an error message but still it moves further and i can see only Send button. Ideally it should halt there itself.
Thanks & Regards,
Jitesh Talreja

Thanks for your valuable inputs
Chintan
I have already tried this. It only highlight the field with the red border but still allow to move further.
Mukesh
Yes, we can definately control this from the backend but that would be the last option i should execute. Ideally, this is something to be controlled in front end itself
Poornima
By setting the field attrbiute Required will set the field mandatory as a whole irrespective of drop down values or any other UI element.
Regards,
Jitesh Talreja

How to set the field size in rule file.

i have to map total 30 fields in a rule file while by default it allows only 20 fields. so how can we set the fields as per our need?

Hi Dharmendra Ojha,
Essbase rule file does not constrain you with only 20 fileds.
When you click on 'create a rule file', by default it ll show you 20 fileds .But , when you open a data file ( in your case , you data file has 30 columns i.e 30 fields) in the data prep editor , you ll see all 30 fileds .
So ,you have to do nothing to increase the filed count , rule file will automatically show all fields .
Revert back for further clarity
Sandeep Reddy Enti
HCC
http://analytiks.blogspot.com

How to set default field values in customer master data.

hi,
I want to set default values in customer master data (account group wise).
but
I don't know how to set it .
please help me.
(I don't want to change field status in account group rather than I want to set default values for field. )
thank you.

hi,
this is to inform you that,
in SAP there is no such a provision.
but
in LSMW there is an option of CONSTANT VALUES.
check in SHD0 - also
please check and confirm
balajis\a

How to set User-field in Plan order

Hi
could you tell me please how to set a user-filed in plan order. when I run MRP planing, I can write some data in this filed.
thanks
henry

Hi,
Actually these user defind fields are used/assigned in the routing.
Initially u have to define your own user defind profile through OPEC transaction.
Assign this profile in the routing.
So when ur executing Mfg activities, suppose if ur using some high materials like silver...etc.
Then after executing the particular operation some amount of silver chips or silver scrap will generated .
To keep chip/scrap qty operation and date which user defind is used.
Once u have assigned this profile to routing, then it will be automatically copied in the planned order/production order.when ur confirming the order then u have to enter the all related data.
Regards
Vijay

Setting From Field/Gmail?

I have two email addresses:
1. one from a university I attended (this is a virtual address)
2. one from the telephone company (this is a real address)
Mail can be sent to my university address and is forwarded to my real address.
The problem I'm having is that the telephone company rejects mail with a different From field when I send mail through it; I can't set the From field to my university address. (I was able to set the From field when we used a cable connection; we switched to the telephone company because it saved about $12-$15/month. As long as people use my university address, everything is OK. With cable, my cable address was never seen. With the telephone company, I can't hide my telephone company address.)
Can sending mail through gmail accomplish what I'm trying to do?
Any other thoughts?
Thanks.

I have a .edu address. There is no storage associated with the .edu address, which is why I call it virtual. All mail sent to the .edu address is forwarded to someplace else. I can login to the .edu server to control the forward.
I need to do this when I switch email providers, which, in my case, happened to be .net. When I switched from a cable to a telephone provider, my physical email address changed. I did not need to inform anyone sending email to me unless they happened to be using my .net address.
In the cable world, the provider accepted .edu From fields. So everything was OK. The telephone provider does not, however, accept different From fields, so the From field is my physical .net address. I've tried "Reply To", but it's effectiveness is sporadic.
Any thoughts?
Thanks.

Tabular form - how to set a field to a constant?

I'm using a tabular form to update a table - and this works. Then I remembered that I need to also update the field that keeps track of who made the change.
Setting this field via the SELECT (e.g. Select 'userX' as editor from ...) for the tabular form fails due to a db concurrency error (MRU 20001) upon submission.
Attempting to override the current value in [Column Attributes] of the field in the [Elements Attibute] setting - [value="userX"] simply adds this as the second value argument of the input element (of the html source).
Suggestions?

Similiar scenario - I have a flag in this table set false that a user can set true when they feel they have satisfactorily reviewed the record.
Since it's in a tabular form it can be changed along w/ other records, but they may not feel the review is complete (so they effectively want the flag to remain false).
I'd like to be able to read records in but set/default the value to reviewed (as a convenience) but due to the problems noted above, this doesn't seem possible.

How to set table field mantatary in data dictinary?

how to set the table field mantatary in data dictinary?
exampl
null value not allowed.

hi,
check this.
[https://forums.sdn.sap.com/click.jspa?searchID=19187532&messageID=2575276]

How to set screen field in ME_PROCESS_PO_CUST?

Dear all,
I need to set this field 'MEPO1317-MWSKZ' to display only by some criteria. I want to know HOW to do it in ME_PROCESS_PO_CUST
Thanks for your kindly helpful.

Hi Esaki,
1) Define new field selection in configuration "Define screen layout at Document level"
2) write code in fieldselection_item_refkeys as follow
get item data
if your condition
ch_key0 = new field selection
endif
Hope it can help u.
Grace

How to set "from" field in Versamail 4.0.1 EAS / Palm Centro Verizon

Similar Messages

Maybe you are looking for