How to set line width using CoreGraphics ?
Hi guys.
I trying draw line with 2 pixels width.
How to set line width on CoreGraphics ?
AFAIK, OpenGLES.framework has method like this :
glLineWidth(2.0);
Is it possible for CoreGraphics ?
Thanks in advance.
See CGContextSetLineWidth in the CGContextReference.
You might also want to look over Painting a Path in the +Quartz 2D Programming Guide+.
\- Ray
Similar Messages
-
Hello,
When I print a PDF document with a 3D annot in "Illustration" Mode, I've got a bad printing. All lines are too thin and sometime hidden.
Is it possible to set the line width? where? in U3D doc or directly in pdf3d engine ?
I apologize for my bad english.
Thank you for answersI do not think it is possible in U3D - there seems to be no field setting line width in the U3D spec.
As to the "pdf3d engine" - likely no. I was complaining on this forum about similar problem with point size
(it can not be controlled and was changed from 1 pixel to 3x3 pixel in a new version of Reader)
and got the following reply from a man of Adobe (http://forums.adobe.com/message/1922684#1922684):
We try to adhere as closely as we can to published formats,
so as point size is not supported in U3D it is not displayed in Acrobat.
We have much greater influence over the content of PRC, so we can more quickly make improvements to that format.
The size of the points displayed by U3D was changed
- but as U3D does not support point sizes, it is not part of the U3D supported elements.
It seems lines and points parts of U3D spec are less important to Adobe than meshes,
so many features are not supported (some limitations are documented, some not). -
File adapter-How to set line break in text file-split record into two lines
Dear Guru's,
I have to solve following problem with XML (with mulitiple records) to TEXT file scenario using file adapter. I have to output for ever ONE data record in XML always two identical lines in text file. Second line should have a little bit different mapping in few fields like date,... So I did duplicate fileds in my output structure in mapping and need to know how to set line break in the middle and see half of structure in first line and next structure half in second line
My output structure in mapping is:
CASHFLOW
- INTERFACE
- GESELLSCHAFT
- ANWENDUNG
- PRODUKT
- VERTRAG
- BETRAG
- WAEHRUNG
- DIRECTION
- BEWEGUNGSTYP
- FAELLIGKEIT
- ZINSFESTSTELLUNG
- ZAHLUNGSTAG
- RENDITE
- INTERFACE2
- GESELLSCHAFT2
- ANWENDUNG2
- PRODUKT2
- VERTRAG2
- BETRAG2
- WAEHRUNG2
- DIRECTION2
- BEWEGUNGSTYP2
- FAELLIGKEIT2
- ZINSFESTSTELLUNG2
- ZAHLUNGSTAG2
- RENDITE2
Question is how can I set on receiving file adapter in Content Conversion Parameters that fields from first structure half INTERFACE...RENDITE should be outputed in one line and fields from second half of structure INTERFACE2...RENDITE2 should start on second line in final text file.
I'm getting at the moment one line only and I need to know how can set line break so that second line starting with INTERFACE2(CA)...RENDITE2 will start in new line.
CA,"0100","7","512",20090127010001,-12454762586.6800,"EUR",2,12,2009-01-28,2009-01-27,2009-01-28,"0.0000000",CA,"0100","7","512",20090127010001,-12454762586.6800,"EUR",1,10,2009-01-27,2009-01-27,2009-01-27,"0.0000000"
This should be final output:
CA,"0100","7","512",20090127010001,-12454762586.6800,"EUR",2,12,2009-01-28,2009-01-27,2009-01-28,"0.0000000"
CA,"0100","7","512",20090127010001,-12454762586.6800,"EUR",1,10,2009-01-27,2009-01-27,2009-01-27,"0.0000000"
My file adapter settings:
RecordsetStructure=CASHFLOW
CASHFLOW.fieldNames=INTERFACE,GESELLSCHAFT,ANWENDUNG,PRODUKT,VERTRAG,BETRAG,WAEHRUNG,DIRECTION,BEWEGUNGSTYP,FAELLIGKEIT,ZINSFESTSTELLUNG,ZAHLUNGSTAG,RENDITE
CASHFLOW.fieldSeparator=,
CASHFLOW.endSeparator='nl'
CASHFLOW.fieldNames=INTERFACE2,GESELLSCHAFT2,ANWENDUNG2,PRODUKT2,VERTRAG2,BETRAG2,WAEHRUNG2,DIRECTION2,BEWEGUNGSTYP2,FAELLIGKEIT2,ZINSFESTSTELLUNG2,ZAHLUNGSTAG2,RENDITE2
CASHFLOW.fieldSeparator=,
It wont help if I add two identical structures in mapping because in output i would see for multiple entries section with first lines only and after that section with second lines only. And CASHFLOW is one part of more complex mapping ...
(This is final output structure RecordsetStructure=HEADER,CASHFLOW,CONDITION,REFERENCE,CONTRACT - more sections with different data and all these should have duplicate lines at the end)
Thanks a lot for any help
Cheers
Marian
Edited by: Marian Luscon on Jul 14, 2009 11:44 AMHi Ivan,
right, I did test just for sure.
Putting constant 'nl' into field CASHFLOW-INTERFACE1 didnt help - still getting one line instead two lines.
CA ,"0100" ,"7" ,"512" ,20090127GTP101 ,-12454762586.6800 ,"EUR" ,2 ,12 ,2009-01-28 ,2009-01-27 ,2009-01-28 ,"0.0000000" ,'nl' ,"GTP1" ,"7" ,"512" ,20090127GTP101 ,-12454762586.6800 ,"EUR" ,1 ,10 ,2009-01-27 ,2009-01-27 ,2009-01-27 ,"0.0000000"
So there is still question. Is there any way (mapping,...) how to output always 2 lines in text file for one record in XML. It always does 1 record in mapping structure = 1 line but we need 2 lines ...
Example:
Input: 4 records in XML
Output: 8 lines in final text file ...
Thanks to you all guys
Marian -
How to set proxy authentication using java properties at run time
Hi All,
How to set proxy authentication using java properties on the command line, or in Netbeans (Project => Properties
=> Run => Arguments). Below is a simple URL data extract program which works in absence of firewall:
import java.io.*;
import java.net.*;
public class DnldURLWithoutUsingProxy {
public static void main (String[] args) {
URL u;
InputStream is = null;
DataInputStream dis;
String s;
try {
u = new URL("http://www.yahoo.com.au/index.html");
is = u.openStream(); // throws an IOException
dis = new DataInputStream(new BufferedInputStream(is));
BufferedReader br = new BufferedReader(new InputStreamReader(dis));
String strLine;
//Read File Line By Line
while ((strLine = br.readLine()) != null) {
// Print the content on the console
System.out.println (strLine);
//Close the input stream
dis.close();
} catch (MalformedURLException mue) {
System.out.println("Ouch - a MalformedURLException happened.");
mue.printStackTrace();
System.exit(1);
} catch (IOException ioe) {
System.out.println("Oops- an IOException happened.");
ioe.printStackTrace();
System.exit(1);
} finally {
try {
is.close();
} catch (IOException ioe) {
}However, it generated the following message when run behind the firewall:
cd C:\Documents and Settings\abc\DnldURL\build\classes
java -cp . DnldURLWithoutUsingProxy
Oops- an IOException happened.
java.net.ConnectException: Connection refused
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:305)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:171)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:158)
at java.net.Socket.connect(Socket.java:452)
at java.net.Socket.connect(Socket.java:402)
at sun.net.NetworkClient.doConnect(NetworkClient.java:139)
at sun.net.www.http.HttpClient.openServer(HttpClient.java:402)
at sun.net.www.http.HttpClient.openServer(HttpClient.java:618)
at sun.net.www.http.HttpClient.<init>(HttpClient.java:306)
at sun.net.www.http.HttpClient.<init>(HttpClient.java:267)
at sun.net.www.http.HttpClient.New(HttpClient.java:339)
at sun.net.www.http.HttpClient.New(HttpClient.java:320)
at sun.net.www.http.HttpClient.New(HttpClient.java:315)
at sun.net.www.protocol.http.HttpURLConnection.plainConnect(HttpURLConnection.java:510)
at sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection.java:487)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:615) at java.net.URL.openStream(URL.java:913) at DnldURLWithoutUsingProxy.main(DnldURLWithoutUsingProxy.java:17)
I have also tried the command without much luck either:
java -cp . -Dhttp.proxyHost=wwwproxy -Dhttp.proxyPort=80 DnldURLWithoutUsingProxy
Oops- an IOException happened.
java.io.IOException: Server returned HTTP response code: 407 for URL: http://www.yahoo.com.au/index.html
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:1245) at java.net.URL.openStream(URL.java:1009) at DnldURLWithoutUsingProxy.main(DnldURLWithoutUsingProxy.java:17)
All outgoing traffic needs to use the proxy wwwproxy (alias to http://proxypac/proxy.pac) on port 80, where it will prompt for valid authentication before allowing to get through.
There is no problem pinging www.yahoo.com from this system.
I am running jdk1.6.0_03, Netbeans 6.0 on Windows XP platform.
I have tried Greg Sporar's Blog on setting the JVM option in Sun Java System Application Server (GlassFish) and
Java Control Panel - Use browser settings without success.
Thanks,
GeorgeHi All,
How to set proxy authentication using java properties on the command line, or in Netbeans (Project => Properties
=> Run => Arguments). Below is a simple URL data extract program which works in absence of firewall:
import java.io.*;
import java.net.*;
public class DnldURLWithoutUsingProxy {
public static void main (String[] args) {
URL u;
InputStream is = null;
DataInputStream dis;
String s;
try {
u = new URL("http://www.yahoo.com.au/index.html");
is = u.openStream(); // throws an IOException
dis = new DataInputStream(new BufferedInputStream(is));
BufferedReader br = new BufferedReader(new InputStreamReader(dis));
String strLine;
//Read File Line By Line
while ((strLine = br.readLine()) != null) {
// Print the content on the console
System.out.println (strLine);
//Close the input stream
dis.close();
} catch (MalformedURLException mue) {
System.out.println("Ouch - a MalformedURLException happened.");
mue.printStackTrace();
System.exit(1);
} catch (IOException ioe) {
System.out.println("Oops- an IOException happened.");
ioe.printStackTrace();
System.exit(1);
} finally {
try {
is.close();
} catch (IOException ioe) {
}However, it generated the following message when run behind the firewall:
cd C:\Documents and Settings\abc\DnldURL\build\classes
java -cp . DnldURLWithoutUsingProxy
Oops- an IOException happened.
java.net.ConnectException: Connection refused
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:305)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:171)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:158)
at java.net.Socket.connect(Socket.java:452)
at java.net.Socket.connect(Socket.java:402)
at sun.net.NetworkClient.doConnect(NetworkClient.java:139)
at sun.net.www.http.HttpClient.openServer(HttpClient.java:402)
at sun.net.www.http.HttpClient.openServer(HttpClient.java:618)
at sun.net.www.http.HttpClient.<init>(HttpClient.java:306)
at sun.net.www.http.HttpClient.<init>(HttpClient.java:267)
at sun.net.www.http.HttpClient.New(HttpClient.java:339)
at sun.net.www.http.HttpClient.New(HttpClient.java:320)
at sun.net.www.http.HttpClient.New(HttpClient.java:315)
at sun.net.www.protocol.http.HttpURLConnection.plainConnect(HttpURLConnection.java:510)
at sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection.java:487)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:615) at java.net.URL.openStream(URL.java:913) at DnldURLWithoutUsingProxy.main(DnldURLWithoutUsingProxy.java:17)
I have also tried the command without much luck either:
java -cp . -Dhttp.proxyHost=wwwproxy -Dhttp.proxyPort=80 DnldURLWithoutUsingProxy
Oops- an IOException happened.
java.io.IOException: Server returned HTTP response code: 407 for URL: http://www.yahoo.com.au/index.html
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:1245) at java.net.URL.openStream(URL.java:1009) at DnldURLWithoutUsingProxy.main(DnldURLWithoutUsingProxy.java:17)
All outgoing traffic needs to use the proxy wwwproxy (alias to http://proxypac/proxy.pac) on port 80, where it will prompt for valid authentication before allowing to get through.
There is no problem pinging www.yahoo.com from this system.
I am running jdk1.6.0_03, Netbeans 6.0 on Windows XP platform.
I have tried Greg Sporar's Blog on setting the JVM option in Sun Java System Application Server (GlassFish) and
Java Control Panel - Use browser settings without success.
Thanks,
George -
How to set the width for a selectManyShuttle component
Hi,
I'm using selectManyShuttle component from Oracle ADF Core and some of the items in the showing list are long, therefore the width of selectManyShuttle expands the page. How to set the width property for selectManyShuttle component? After that does selectManyShuttle provide horizontal scrollbar as well?
Thanks in advance,
lapi
Message was edited by:
[email protected]
Message was edited by:
[email protected]Solution here:
Re: ADF Faces Scrollable Panel or Scroll Bar inside a component
Regards
Grant -
VSTO: How to set line break in Ribbon Xml?
Hi All,
I have a button in Ribbon.xml. it looks like:
<group label="myLabel" id="View">
<checkBox id="cbView" label="ViewViewviewviewview" getPressed="cbView_Pressed"/>
</group>
The result is shown as:
The checkbox is too long. My question is : How to set line break in checkbox's label.
Thanks a lot,
By the way, in Ribbon Xml. How to add RadioButton?Hello Ricky,
The Fluent UI (aka Ribbon UI) doesn't provide any attribute or callback for that. You can try to use an escape sequence "\n\r", but I am not sure whether it helps. Also you may consider placing a text block below the check box control.
You can read more about the Ribbon UI in the following series of articles:
Customizing the 2007 Office Fluent Ribbon for Developers (Part 1 of 3)
Customizing the 2007 Office Fluent Ribbon for Developers (Part 2 of 3)
Customizing the 2007 Office Fluent Ribbon for Developers (Part 3 of 3) -
How to set column width in alvgrid
hi
how to set column width in alvgrid.
thanks.Hi,
Check this,
REPORT ztest.
DATA: BEGIN OF i_scarr_tab OCCURS 0.
INCLUDE STRUCTURE scarr.
DATA: END OF i_scarr_tab.
DATA: i_scarr LIKE TABLE OF i_scarr_tab WITH HEADER LINE,
w_scarr LIKE LINE OF i_scarr_tab.
DATA: o_grid TYPE REF TO cl_gui_alv_grid,
o_container TYPE REF TO cl_gui_custom_container.
DATA: lt_fcat TYPE lvc_t_fcat,
ls_layo TYPE lvc_s_layo,
ls_sort TYPE lvc_s_sort,
lt_sort TYPE lvc_t_sort,
ls_fieldcat TYPE slis_t_fieldcat_alv WITH HEADER LINE.
START-OF-SELECTION.
CALL SCREEN 9000.
*& Module status_9000 OUTPUT
text
MODULE status_9000 OUTPUT.
SET PF-STATUS '9000'.
SET TITLEBAR '9000'.
ENDMODULE. " status_9000 OUTPUT
*& Module user_command_9000 INPUT
text
MODULE user_command_9000 INPUT.
CASE sy-ucomm .
WHEN 'BACK' OR 'EXIT'.
SET SCREEN 0.
LEAVE SCREEN.
ENDCASE.
ENDMODULE. " user_command_9000 INPUT
*& Module init_9000 OUTPUT
text
MODULE init_9000 OUTPUT.
IF o_container IS INITIAL.
SELECT * FROM scarr INTO CORRESPONDING FIELDS OF TABLE
i_scarr UP TO 100 ROWS.
IF cl_gui_alv_grid=>offline( ) IS INITIAL.
Create a custom container control for ALV Control
CREATE OBJECT o_container
EXPORTING
container_name = 'CONTROL'.
Create a ALV Control
CREATE OBJECT o_grid
EXPORTING i_parent = o_container.
PERFORM build_field_catalgue.
ls_layo-sel_mode = 'A'.
CALL METHOD o_grid->set_table_for_first_display
EXPORTING
i_save = 'A'
i_default = 'X'
is_layout = ls_layo
CHANGING
it_outtab = i_scarr[]
it_fieldcatalog = lt_fcat
it_sort = lt_sort[].
ENDIF.
ENDIF.
ENDMODULE. " init_9000 OUTPUT
*& Form build_field_catalgue
text
--> p1 text
<-- p2 text
FORM build_field_catalgue .
DATA: ls_fcat TYPE lvc_s_fcat.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = sy-cprog
i_internal_tabname = 'I_SCARR_TAB'
i_structure_name = 'SCARR'
i_client_never_display = 'X'
CHANGING
ct_fieldcat = ls_fieldcat[]
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE 'FCAT Error' TYPE 'I'.
EXIT.
ENDIF.
LOOP AT ls_fieldcat.
CLEAR ls_fcat.
ls_fcat-fieldname = ls_fieldcat-fieldname. "Fieldname
ls_fcat-ref_table = ls_fieldcat-tabname. "DDIC ref struct
ls_fcat-inttype = ls_fieldcat-inttype. "Data type
ls_fcat-outputlen = ls_fieldcat-outputlen. "Column width
ls_fcat-coltext = ls_fieldcat-seltext_m. "Column Header
ls_fcat-seltext = ls_fieldcat-seltext_m. "Column Desc
ls_fcat-ref_field = ls_fieldcat-ref_fieldname. "Reference field
ls_fcat-ref_table = ls_fieldcat-ref_tabname. "Reference table
CASE ls_fieldcat-fieldname.
WHEN 'LUGGWEIGHT' OR 'FORCURAM'.
ls_fcat-edit = 'X'.
ls_fcat-do_sum = 'X'.
WHEN 'URL'.
ls_fcat-no_out = 'X'.
WHEN OTHERS.
ls_fcat-edit = ' '.
ls_fcat-do_sum = ' '.
ENDCASE.
APPEND ls_fcat TO lt_fcat.
ENDLOOP.
ENDFORM. " build_field_catalgue
check the programs bcalv_grid*.
check this link for more detailed example.
http://www.supinfo-projects.com/fr/2005/alv_display_fr/2/
Regards
Sruthi -
HELP Friends!!! How to set the width of columns of JTABLE?
Hi!
How to set the width of a particular column in JTable?
I tried using headerRenderers and though I'm able to set the color and font of the header (using getTableCellRendererComponent method)I can't change the size.
Pls some one help me..it's very urgent.
Thanks in advance.
Regards,
NavalJTable.getColumnModel().getColumn(i).setWidth(width). There are also setPreferredWidth, setMaxWidth and setMinWidth methods.
-
How to set-up and use FAMILY Sharing
Can someone please explain to me in detail how to set-up and use FAMILY Sharing, none of the information I have so far found in the documentation helps at all, in fact it puts you in a constant loop giving the same information over and over again
We have quite a few devices from ipads, iphones and ipods and I need to set-up Family Sharing.
We have our main Apple ID which is linked to our Payment method, I have now got my son a new iPad, I have created his Apple ID and set-up a link via FAMILY Sharing to our main Apple ID.
From what I read we should be able to share our purchased Apps between family members.
So I figured I would be able to get the Apps now via iTunes that are part of the FAMILY Sharing, however when I go into ITunes (latest version downloaded yesterday) I can only see the Home sharing menu item not FAMILY Sharing, so I cannot work out in Itunes how to get Apps that are FAMILY shared. So ok I will try and get Apps directly via the Ipad using the App Store. To test it is working I look for a known paid for App, I then go to download it and it is now asking me to pay for it again.
Can someone please explain to me in detail how FAMILY Sharing is supposed to work and how I get it to work please.
Thanks for your help
GregHey GregWr,
Thanks for the question. The following resources provides some of the best information regarding Family Sharing. Included, you’ll find information on making sure the accounts are set to "Share my purchases”, as well as information on downloading Family Member purchases from the iTunes Purchased section. Please note that some applications are not shareable.
Sharing purchased content with Family Sharing - Apple Support
http://support.apple.com/en-us/HT201085
Which purchased content can I share using Family Sharing - Apple Support
http://support.apple.com/en-us/HT203046
If you don't see your family's shared content - Apple Support
http://support.apple.com/en-us/HT201454
Thanks,
Matt M. -
How to set up shared use of "Contacts" data w/ 2 individual user accounts?
How to set up shared use of application "Contacts" data for two individual user accounts?
Link the contacts in one user account to a online cloud based system like Google or apples iCloud and then link the second user to that same online account. This could cause some slight problems if both people maintain their own online account to either of those systems on a phone or pad.
-
How to set up and use AirPlay
Welcome to the Apple Community.
AirPlay; When watching suitable content on the iPad, tap the screen to bring up the controls, tap the AirPlay icon and select the Apple TV. The content will then stream to the Apple TV.
Mirroring; Double tap the home screen button, swipe the application panel to the right, tap the AirPlay icon and choose the Apple TV. The iPad screen will then be streamed to the Apple TV. -
How to set unequal columns using master pages in InDesign CS3?
How to set unequal columns using master pages in InDesign CS3?
I don't have CS3 anymore but I don't think this has substantially changed in the last few versions of InDesign.
Choose View > Grids & Guides > uncheck Lock Column Guides. Then drag the column guides to the position you want. -
How to set the WIDTH and ALIGN of h:column in h:dataTable ??
How to set the WIDTH and ALIGN of <h:column> in <h:dataTable>??
Thanks a lot!Hi,thanks to your reply.
Now I find a more convenient appraoch to set column's width and align respectively:
<h:dataTable ...>
<h:column>
<f:facet name='header'>
</f:facet>
<h:outputText style="width:80px; text-align: right;" value='#{row.fieldA}'/>
</h:column>
<h:column>
<f:facet name='header'>
</f:facet>
<h:outputText style="width:120px; text-align: left;" value='#{row.fieldB}'/>
</h:column>
</h:dataTable>
It works fine.
^-^ -
How to set line style to be underline for links using PDLinkAnnotSetBorder
Hello,
I want to set link line style to be underline. am not finding any difference for solid and underline except cosname of S (BS) is U or S
Please anyone tells me how to change the link line style to be underline.
Thanks,
SowThanks for reply.
I am using code as show below to change line style to solid and dashed.
PDLinkAnnotBorder pdLinkBorder;
PDLinkAnnotGetBorder( rpdAnnot, &pdLinkBorder);
//For solid
pdLinkBorder.dashArrayLen = 0;
PDLinkAnnotSetBorder( rpdAnnot, &pdLinkBorder);
//For dashed
pdLinkBorder.dashArrayLen = 1;
for( int iIndex = 0; iIndex < PDAnnotMaxDashes; iIndex++)
{ ASInt32 iThickness = 3;
pdLinkBorder.dashArray[iIndex] = Int32ToFixed( iThickness );
PDLinkAnnotSetBorder( rpdAnnot, &pdLinkBorder);
how should I do for underline. If am using cosobject how to change line style to underline using cosobject
Please let me know.
Thanks,
Sow -
How to set the width of a shuttle?
Hi
I have a group which is shown in intersection-shuttle style but the problem is that it breaks some rows into two lines and i want to make the shuttle a bit wider. How could I set the width of the shuttle. Apparently the Group Width attribute of the group doesn't work for this.You could try this using the inlineStyle property of the shuttle component in the generated page. Not sure that works though. You better ask this on the JDeveloper forum.
If it works you can create a custom template to include the inlineStyle property during generation.
Steven Davelaar,
Jheadstart Team.
Maybe you are looking for
-
I need to query LIKP to extract all records added in last 24 hrs. select vbeln from likp where ...
-
Service Orders gets saved but text at item level are not saved for all item
Hi All, We have configured service order scenario. The service order gets saved in GUI and in WebUI. But we are facing issue that not all the text entered at item level are getting saved. Example if we maintained text for 4 line items and save the SO
-
Complex requirement!!!! Any Help on this !!!
Hi All , BANNER Oracle9i Enterprise Edition Release 9.2.0.5.0 - Production PL/SQL Release 9.2.0.5.0 - Production CORE 9.2.0.6.0 Production TNS for 32-bit Windows: Version 9.2.0.5.0 - Production NLSRTL Version 9.2.0.5.0 - Production I have a T
-
Saving to database? Plaese help!
Just a quick question. I have some data in the form {some numbers separated by commas} which are saved to a text file. I can do this and it is working but what I wanted to know is whether it is possible to save the {numbers} into a database so that e
-
"not enough free space" is a lie
My phone synced just fine two days ago. Plugged it in yesterday and it claims to need 5.2gb with only 225mb available. Only change between syncs is a couple new podcasts (and a couple I'd listened to could come off). I tried syncing without podcasts,