How to set "Output folder" and "Outputfolder URL" in Flasbuilder 4b1 for combined Java/Flex project with WTP?

Hi,
how can I set the "Output folder" and "Output folder URL" in Flasbuilder 4b1?
In Flexbuilder 3 I can do this under Project Properties/"Flex Build Path" 
Under "Flex Build Path" in F4b1 I can see the settings, but they are not editable.
A message says "The output folder settings for server projects are on the Flex Server Property Page" but under "Flex Server" there is nothing (yet) I can change/set?!
Is there a workaround?
Thanks for any pointers!
Martin Zach

Yes I'm using Flash Builder b1, build 235740. But your settings panel looks different to mine (see attached).
Just a thought. When you created the Flex project, did you choose a server technology at that point already? I just remember from Flex Builder 3 that if you didn't choose a server technology when you created the Flex project then it was a pain in the ** to add it later. It involved editing the .flexProperties file manually if I remember correctly.

Similar Messages

  • How to set output 1 and 2 and master in pro logic express when mixing

    what is the recommended procedure for setting the levels of output 1 and 2 fader and the master fain pro logic express when mixing? I'm used to just one master fader with my Mackie board.  Is there anything in the manual?

    Already found the answer myself.
    The entries have to be made in the sun-j2ee-ri.xml file.
    cheers,
    Markus Hammori

  • How to set input delay and output delay when source Synchronous

    ClkIN is the board clock which is connected to the FPGA. Clkif is the generated clock from ClkIN. The Device's clk come from Clkif. So, how to set input delay and output delay in this scene(within my understand, this is Source Synchronous)?
    The example in many document, the input delay and output delay setting all refer to board clock(within my understand, this is System Synchronous). In that scene, the input delay max = TDelay_max + Tco_max; input delay min = Tdelay_min + Tco_min; the output delay max = Tdelay_max + Tsu; output delay min = Tdelay_min - Th.
    So, I want to know how to set input/output delay in the Source Synchronous.
    In system synchronous, I set input/output delay such as:
    create_clock -period 20.000 -name ClkIN -waveform {0.000 10.000} [get_ports ClkIN]
    create_generated_clock -name Clkif -source [get_pins cfg_if/clk_tmp_reg/C] -divide_by 2 [get_pins cfg_if/clk_tmp_reg/Q]
    create_clock -period 40.000 -name VIRTUAL_clkif //make virtual clock
    set_input_delay -clock [get_clocks VIRTUAL_clkif] -min 0.530 [get_ports DIN]
    set_input_delay -clock [get_clocks VIRTUAL_clkif] -max 7.700 [get_ports DIN]
    set_output_delay -clock [get_clocks VIRTUAL_clkif] -min -0.030 [get_ports DOUT]
    set_output_delay -clock [get_clocks VIRTUAL_clkif] -max 1.800 [get_ports DOUT]
    *******************************************************************************************

    So, first. Architecturally, the clock that you forward to your external device should not come directly from the clock tree, but should be output via an ODDR with its D1 input tied to logic 1 and the D2 tied to logic 0. This guarantees minimal skew between the output data and the forwarded clock.
    ODDR #(
    .DDR_CLK_EDGE("OPPOSITE_EDGE"), // "OPPOSITE_EDGE" or "SAME_EDGE"
    .INIT(1'b0), // Initial value of Q: 1'b0 or 1'b1
    .SRTYPE("SYNC") // Set/Reset type: "SYNC" or "ASYNC"
    ) ODDR_inst (
    .Q (Clkif_ff), // 1-bit DDR output
    .C (ClkIN_BUFG), // 1-bit clock input
    .CE (1'b1), // 1-bit clock enable input
    .D1 (1'b1), // 1-bit data input (positive edge)
    .D2 (1'b0), // 1-bit data input (negative edge)
    .R (rst), // 1-bit reset
    .S (1'b0) // 1-bit set
    OBUF OBUF_inst (.I (Clkif_ff), .O (Clkif_out));
    This generates an output clock that is the same frequency as your input clock. This is consistent with your drawing, but inconsistent with your constraints - is the forwarded clock a 50MHz clock or a 25MHz clock?
    I will assume your ClkIN goes to a BUFG and generates ClkIN_BUFG.  Your first constraint generates a 50MHz clock on the ClkIN port which will propagate through the BUFG to (among other places) this ODDR.
    create_clock -period 20.000 -name ClkIN -waveform {0.000 10.000} [get_ports ClkIN]
    Assuming your forwarded clock is supposed to be 50MHz, then your 2nd command is close to correct
    create_generated_clock -name Clkif -source [get_pins cfg_if/ODDR_inst/C] -combinational  [get_pins cfg_if/ODDR_inst/Q]
    With this done, you have successfully described the forwarded clock from your design. This is the clock that goes to your device, and hence should be the clock which is used to specify your input and output constraints.
    set_input_delay -clock [get_clocks Clkif] -min 0.530 [get_ports DIN]
    set_input_delay -clock [get_clocks Clkif] -max 7.700 [get_ports DIN]
    set_output_delay -clock [get_clocks Clkif] -min -0.030 [get_ports DOUT]
    set_output_delay -clock [get_clocks Clkif] -max 1.800 [get_ports DOUT]
    If you want to get fancier, you could try adding a set_clock_latency to the forwarded clock to account for the board propagation of the clock
    set_clock_latency -source TDtrace2 [get_clocks Clkif]
    (But I haven't experimented with clock latency on a generated clock and I don't know for a fact that it works).
    Avrum

  • How to set share folder for mac 8.6 in windows

    I know how to set share folder for mac 8.6 in windows xp. I installed the NetBIOS. But i still can not found windows share file in mac 8.6. Need to install 'DAVE'?

    I want to setup file sharing. Then, I will setup share printer for mac8.6. I tried to config File Sharing control panel. But it do not scuccessful. Do have you way to solve file sharing and share printer problem. Not use NetPresenz.
    I follow the website to setup file sharing. But I is not successful.
    the website:
    http://homepage.mac.com/car1son/os9xnet_nfilesharing.html
    I go to appletalk control panel to connect via choose ethernet bulit-in. It appear a error. The error is 'An error occurred attempted to use Ethernet bulit-in. Make sure your network connection are correct.'
    Thank you very much for your help.

  • How to set multiple ORACLE_HOME and ORACLE_SID, on Windows

    How to set multiple ORACLE_HOME and ORACLE_SID, on Windows.
    I have 5 oracle instances. Every time if i want to start up the services , I am manually setting the environment variable (ORACLE_HOME and ORACLE_SID) and starting the services one at a time.
    Can we set multiple ORACLE_HOME and ORACLE_SID in Start->My computer-> properties-> advance-> Environment variable.
    Thanks
    Naveen

    Hi ,
    Can you please give me the link, for the doc you are referring to
    Thanks
    Naveen

  • How to set the IP and MAC address in C program?

    My working environment is Sun250 Server, Solaris 7 operating system. I encountered a problem ---- How to set the IP and MAC address in C program to make the system change it IP & MAC at runtime?
    Any idea is welcome! Thanks!

    Hi
    As a simplest possible solution, you can use the system command
    to run ifconfig that can set both the mac address and the IP address of the system. You will have to use setuid though.
    Or you can use the DLPI calls ( do a man DLPI or search for a
    Sun documentation on the same at http://soldc.sun.com) to write
    a pure C program.
    HTH
    Shridhar

  • How to set default currency and Country in R12 financial modules

    Hi all,
    How to set default currency and Country in R12 financial modules (AR,AP,GL,FA,CE) becuase I found some default settings are shown "USD" & "United States" such as create AR Customer, the Country is shown the default "United States"....
    Can anybody advise ?
    Thanks & Regards,

    Hi,
    Change the below profile for the user to a territory different than the US :
    In System Administrator, navigate to Profiles -> System.
    Select Site, Application, and Responsibility.
    Profile options:
    Default Country
    HZ: Reference Territory
    ICX: Territory
    Regards,
    Raju.

  • How to set the WIDTH and ALIGN of h:column in h:dataTable ??

    How to set the WIDTH and ALIGN of <h:column> in <h:dataTable>??
    Thanks a lot!

    Hi,thanks to your reply.
    Now I find a more convenient appraoch to set column's width and align respectively:
    <h:dataTable ...>
    <h:column>
    <f:facet name='header'>
    </f:facet>
    <h:outputText style="width:80px; text-align: right;" value='#{row.fieldA}'/>
    </h:column>
    <h:column>
    <f:facet name='header'>
    </f:facet>
    <h:outputText style="width:120px; text-align: left;" value='#{row.fieldB}'/>
    </h:column>
    </h:dataTable>
    It works fine.
    ^-^

  • How to set the router and play the Command & Conquer using direct IP mode?

    My router is WRT54GFirmware Version: v3.03.1
    How to set the router and play the Command & Conquer using direct IP mode with other computer?

    Hi, when you say direct IP mode, what do you mean ? do you wanna play the game online or on the LAN ??
    can you give a few more details.

  • How to set the gain and input coupling for each channel on a NI 4462 DaQ card?

    I've seen a few examples in how to set the gain for NI 4462, but none tell me how to chose the channel I wish to set this gain.  Also the same problem with input coupling
    Does anyone know how to set the gain and input coupling for each individual channel?
    Thanks,
    Hector
    LabView 8.5 Windows XP

    Hey Hector,
    http://forums.ni.com/ni/board/message?board.id=100&thread.id=1688
    This has a few examples of how to do that.  Let me know if you have further questions.
    Have fun!
    -gaving

  • How to set the Mail and Fax options  for the Smartforms ???

    How to set the Mail and Fax options  for the Smartforms ??? Please reply me very soon. Its a life deciding question now for me. Please .

    >
    veera Karthik wrote:
    > How to set the Mail and Fax options  for the Smartforms ??? Please reply me very soon. Its a life deciding question now for me. Please .
    Hi
    Check this Link:
    http://help.sap.com/saphelp_nw04/helpdata/en/a5/28d3b9d26211d4b646006094192fe3/frameset.htm
    P.S: Never say reply me soon....people answer you here voluntarily and as everyone has their own desk to manage...sp replies may late or early..depending upon the availabality of the members.
    Vishwa.

  • I did re-set my password and when I click on Install for Mavericks, I still get a box for "administrator password" and it still won't accept my new password. Is there a difference between my Apple ID and the administrator password they're asking for?

    I downloaded Mavericks and it won't install. I did re-set my password and when I click on Install for Mavericks, I still get a box for "administrator password" and it still won't accept my new password. Is there a difference between my Apple ID and the administrator password they're asking for? I never had an administrator password-- I just hit enter and have never had a problem before with previous installations. I'm on an iMac, from 2007, running Mt. Lion (version 10.8.5). I've been looking for other's posts who may be having the same problem, but haven't found any. Can anyone help?

    Ugh. The 'no password, no work' thing is a recent Apple development. I ran into it on my system and ended up having to do a clean install on a partition I fully erased.
    I suppose, if you have the ability to, go online and look up how to burn a bootable DVD image. Download the 10.8.4 image then use the Disk Utility to make a boot image of it. You'll need a dual-layer DVD or a USB drive (or memory stick at least 8GB) If you've got an optical drive, burn the disk, if you've a USB device, use that.
    Then get a pocket drive and copy your important files off the system or let Time Machine do a full backup.
    When the backup is done, insert the disk and hold down the C key until the machine boots off of the DVD. At the point you get to the start window, go to the menu and choose the Disk Utility.
    In the Disk Utility, reformat the drive. You go to the actual DRIVE (not the Macintosh HD, but the root above it that is the actual hard drive device)
    I always do this and *partition* it into several volumes, the benefit being, you can store all of your music, documents and importans stuff on that secondary storage volume you make - it will have it's own index and then the first volume is where you put the OS and it will have it's own index as well. That way, if the OS throws a wobbler and you need to reinstall, you don't lose your data.
    Depending on the size of your hard drive, it is good to give your OS partition at least 60GB and optimally 100GB, and the rest for storage.
    Name your volumes, use the little box sliders to manually size them or put that number in the size window, select for the format, Mac OS Extended (Journaled) and hit Apply and then the Disk Utility will quickly create your new partitions.
    Once finished, quit the Utility and it will return you to the OS installer. Select the volume you want to install to and it should start up and install.
    Once the installation is done, you'll get the new machine startup then you MUST put in a password for the computer. Once you're in, and to the desktop, don't bother with any Mountain Lion updates, go right to the App Store and get the Mavericks update and let it install the app to your Applicaitons folder, then do that install.
    On a side note, there MAY be a way to make a disk image from the Mavericks application and avoid the entire Mountain Lion step.. I honestly do not know, but a bit of hitting the search engines may find out if there is. I think that if you looked for "make Mavericks boot disk or boot image' you may find something.
    Good luck!

  • I need to know how many downloads individual albums and songs had off of iTunes for a project, how do I find these numbers?

    I need to know how many downloads individual albums and songs had off of iTunes for a project, how do I find these numbers?

    Ed...maybe a little less time gaming and a bit more time in English class? They got this thing called punctuation and sentences now. Last things first; there is no amount of money that can change your GPU so you can scratch that expense off the list. So you need a battery and a fan? Where do you live? USA? We can help you find a battery but where did you plan to have the new fan put in? 

  • Where do you get kaspersky anti banner and kaspersky URL advisor extensions from for firefox v5

    Where do you get kaspersky anti banner and kaspersky URL advisor extensions from for firefox v5

    You need to contact Kaspersky about their plans for supporting Firefox 4. It is quite common for companies to only support a new version of a browser after it has been officially released, and not support it during the beta/release candidate phase.
    You should check for any Kaspersky updates in case they have already added support for Firefox 4

  • I CANNOT change my phone number to an sms capable number to set-up keychain.. I have tried everything. My mobile is stuck set to @icloud and my mac to stuck set to @me and there aren't any options for changing anything. Any help appreciated.

    I CANNOT change my phone number setting to an sms capable number to set-up keychain.. I have tried everything. I am on a Mac OSX, Mavericks upgrade and an iPhone 5. My mobile is set to @icloud and my mac is stuck set on @me and there aren't any options for changing either my phone number, account, details or anything. I simply want to set-up keychain and receive an sms to my mobile and not to my sms non-compatible home phone number. Any help sooo appreciated.

    On your Mac, Sign Out of iCloud, then Sign In with the ID you want to use.

Maybe you are looking for