How to set page margin for any site being viewed without back and forth scrolling?

Some sites and most forums, the threads cannot be read without scrolling the screen back and forth. How can these be set where all information is read without moving screen short of up or down and not side ways back and forth.

Thank you all for attempts to satisfy my needs. The last concerning my screen is 19 inches and 800 resolution. I'm very long in the tooth and if I go higher in
resolution I have to play squint the fonts are so small. Crank them up and I'm back to scrolling back and forth on the screen.
Again thanks for help but I' m not interested in spending money on newer
haha state of the art equipment just to satisfy the need of cyber space Ad
purveyors to post their wares. Graphics I can do without as well. If they want
me to see what they have to offer, then stop messing with what once worked just fine.
I still have Word where I can do with whatever I copy n paste to get done what I need. The convenience of doing so right at the site isn't a requirement as such. Being a retired Master Electronics Technician, I'm short on computer orientations but long on other kinds of smarts.
Again, Thank you all for the help.
Gizmoman

Similar Messages

  • How to set page margins in Numbers 3

    I just migrated from MS Excel after decades of use. I can't find out how to set page margins using the new Numbers 3 version. I believe I've exhausted all reference materials and the most relevant was an method in Numbers 8 & 9... both of which have a different top menu selection.  The answer is probably right in front of me and simple as it sometimes happens when learning new software...

    Hi caforestfire,
    There is no direct equivalent to page margins in Numbers 3.0. It's more oriented toward sharing on the web and on iPad screens than toward traditional printing.
    However, there are ways to achieve the effect of margins.  The idea is to first position your content (tables, charts, etc) on the canvas of a sheet, using rulers and guides if you want (you can drag the rulers onto the canvas to help in placement):
    Then you File>Print and in Print Preview fiddle with the slider until you get the white space you want around your content:
    Then click Print.
    For many purposes it works quite well. It's just a different approach from what we're used to in Excel, and the old Numbers 2.3.
    SG

  • How do I delete email messages so that they stop "bouncing" back and forth between my devices?

    How do I delete email messages so that they stop "bouncing" back and forth between my Macbook, ipad, and iphone?

    Hi ST,
    The first screen shot is the left (main) screen after I moved CS6 to the right screen (second screen shot). As you can see the CS6 panels are in front of MS Word. If I click in the Word document they go behind Word. If I switch over to on the right screen the panels reappear but in front of Word again. So I either have to switch back and forth between the two screens if I want to work in CS6 or manually movee the panels over to the Right Screen. It is rather awkward to have to do that. Make sense?
    Left (Main Screen)
    Right Screen

  • How to set version limit for entire site collection

    Hi,
    We have more than 500 document libraries in one site collection. I see some of them have more than 50 versions & taking lot of storage space. So planning to limit the version's to 3 Major and 3 Minor for entire site collection. How can we do that? I
    know we can set to individual library by how can we do that for entire site collection?
    Thanks
    Rithu.
    Rithu

    The version limit is a library specific setting, so you'll need to use PowerShell to set the property value on each library in every site in the site collection.  Here's a sample script that sets if for one library.  You'll need to expand the script
    to walk the sites recursively and run this for every library.  
    https://consultantpoint.wordpress.com/2012/06/15/powershell-setconfigure-document-library-with-majorversionlimit-majorwithminorversionslimit-require-to-checkout-before-editing/
    Please Note: Changing these settings won't delete old versions.  That only happens after each item in the list or library is edited.  
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

  • How to set page break for Narrative view???

    Hi All,
    I have created a report in Narrative view using HTML code. I am stuck how to set page break based on a column in Narrative view. If anybody is aware of the issue pls let me know how to overcome this situation. Or if this can be done using HTML code itself pls let me know how to do it.
    Thanks & Regards
    Thenmozhi

    Hi Honey,
    I am not sure on ur requirement but you can achieve page break with a column using pivot view by dragging that column into section area and editing section properties to Insert Page break option.

  • How to set page margins in numbers version 3.0?

    How can I set document margins in Numbers version 3.0 ?
    In numbers "help" , "margins" has no results.
    Normally I have a item "page layout" just above "print..."  in the archive tab, but in this version it is missing.

    Hi Adj,
    Many features have been lost in Numbers 3. You can send feedback to Apple with Menu > Numbers > Provide Numbers Feedback.
    Features that Apple has promised to reinstate:
    http://support.apple.com/kb/HT6049
    What has been GAINED in Numbers 3 is here:
    https://discussions.apple.com/thread/5473882?start=75&tstart=0
    What has been lost in Numbers 3 is here (with corrections where Apple has already reinstated some lost features in the Numbers 3.1 update):
    https://discussions.apple.com/thread/5470448?start=240&tstart=0
    Hints on workarounds here:
    https://discussions.apple.com/message/23622372#23622372
    In particular,
    Try Alignment Guides and Rulers as suggested here:
    Print View workarounds
    Numbers has never had Page Breaks. The Numbers approach is to have several tables, each with a purpose. For example, an input table, a number crunching table, and a "Presentation" table to summarise results.
    If your quotation runs to six pages, perhaps you could have 6 tables designed so that each fits within a layout guide:
    Layout Guide for Numbers
    Option 2, if you previously had Numbers 2.3 (Numbers '09) it now lives in a folder called iWork '09 inside your Applications folder. It works just as well as it used to, and has a proper Print View.
    Option 3, copy and paste your table to Pages where I believe the layout is easier to arrange (maybe).
    Regards,
    Ian.

  • How do set printing margins for my hp110photo smart printer

    I can't get my printer to print the whole page text. It cuts off most of the right portion of the document.How do I set the margins so it doesn't do this.

    seminolepeddler
    Possible place(s) to look for a fix:
    This might be a function output of the type of document you are printing.
    Try setting the editor to wrap the text at a particular margin size.
    Depending on your document editor and / or your browser , much of what is printed is controlled in Print Preview.  The Print Preview feature is available in most editors and most browsers under File, that is, the left-most editor drop down menu function.  (Chrome lacks a File Menu, find these features in Settings.)
    You may need to switch the print to landscape.
    You can also control the margins, at least to a small degree, in the Page Setup > Margins - Header / Footer tab of Print Preview.  Be Aware:  Expanding the margins may impact the header / footer information that is ordinarily printed on the document along with the text.  You can switch off this information, if desired.
    Dragon Document about Print Preview:
    Change Print Size with Print Preview
    Click the Kudos Thumbs-Up to show you appreciate the help and time from our Experts.
    Although I strive to reflect HP's best practices, I do not work for HP. 
    Click Accept as Solution when the Answer is a good Fix or Workaround!
    Kind Regards,
    Dragon-Fur

  • How to set different margins for a single document?

    Hello,
    I'm creating a Pages document that will be exported to PDF.
    On text pages I need to set margins on all sides, but for photo pages I want the margins completely removed.
    What would be the best way to do this?

    The best way would be to choose either *Layout mode* which is free form layout except for headers and footers, or to use *Word Processing* mode but make all your Photos in Floating imageboxes which can be placed wherever you like.
    see p132 of the Pages09_UserGuide.pdf downloadable from under the Help menu.
    Peter

  • How to set up hosting for Muse site?

    How do I set up Business Catalyst hosting for a new site built with Muse. The new site will replace a site currently hosted by yahoo.
    Stephen

    Hi there,
    You should find this article helpful http://www.adobekb.com/upgrading_and_launching.html
    Cheers,
    Mario

  • How to set the margins for the pdf output in BI Publisher

    Hi There,
    When we view a report in PDF format in BI Publisher, we get pdf output in an iframe.
    There are two scroll bars on the right side. When we scroll down the outer scrollbar to the bottom, there is a white space between the bottom border of the pdf report and bottom portion of the window.
    We are calling BI report from apex by passing the url of the report. In this case the white space at the bottom is quite evident and seems that lot of space is being wasted.
    Can somebody help me, how to remove or minimize this white space.
    Thanks
    Krishna
    Edited by: Yogi on Aug 30, 2010 5:41 PM

    Hello,
    open your report for editing, so you see the page with your layouts. Then click on the Link "Show as List" on the upper right. In the List of the output formats select "FO Formatted XML". This enables FO Export.
    Then execute your report, click on the small menu item at the upper right. The Menu opens, select Export -> FO.
    Hope that helps.
    Greetimgs,
    Sascha

  • Problem setting page margins for printing

    I made a program that prints inventory reports at work, but I wanted to push back the margins a bit so I can use a font size one larger. As it is, some of the information is at font size 10. I do not want to use the "Page Settup" dialog to bug the user to change it; I wanted to set it automatically.
    I tried taking the PageFormat argument to Printable's print() method and setting the imageable area like so...
        public int print(Graphics graphics, PageFormat pageFormat, int pageIndex)
            Paper formatEdit = pageFormat.getPaper();
            formatEdit.setImageableArea( 36,36, pageFormat.getWidth()-36,pageFormat.getHeight()-36);
            pageFormat.setPaper(formatEdit);
            ...Is this at least the general approach I should be using, or should I be doing something totally different?
    As always, thanks much in advance.
    Edited by: Loduwijk on Sep 25, 2008 3:40 PM
    Edited by: Loduwijk on Sep 25, 2008 3:50 PM

    Set them automatically based on what criteria?
    If you just want to set them programatically, then as the Help indicates, use the Printing:Margins property to set those values.
    Attachments:
    Example_VI_BD.png ‏2 KB

  • How to set up Qos for Microsoft Lyncs 2013 in cisco Switches and Router

    Hi
    as i am new to Qos part , please send the complete qos configuration command has to apply in my cisco 2960s switchs as well as 4506 chassis(L3 mode act as my router).
    as i know from microsoft, DSCP 46 and 34 should give highest priory
    please send the completed configuration for priorities this DSCP
    thanks
    Sujish

    Hi,there,
    The rule setting should be same as in Exchange 2010,you can configure it via outlook or OWA if you have full access permission. I also believe it should be something related to Repliation,would you please check the event log to see if the
    AD and Exchange replication has completed.
    In some cases, replication can take longer depending on how many AD sites and Exchange servers in the environment:
    http://support.microsoft.com/kb/148381
    http://support.microsoft.com/kb/158989
    Hope these useful!
    Regards,
    Sharon
    Sharon Shen
    TechNet Community Support
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question.

  • How to set Update Mode for DSO in BI7.0?

    Hi,
    As you know in bw3.5, in update rules we can set  the update mode for ods as Additive or overwrite functionality.
    But can anybody tell me where are these settings in bi7.0? or
    How to set Update Mode for DSO in BI7.0?
    Thanks and Regrards,
    Harshal

    Dear Harshal,
    GO to the tramsformations of your DSO..
    In the Rule Group..Click on any key Figure..
    this pops u a window..in which u will find  AGGREGATION ..Then u can select Either OVERWRITe or SUMMATION which suites ur requirement..
    Hope this helps u..
    Assign points if helpful..
    Best Regards,
    VVenkat..

  • How to set Compatibility Mode for a single site in ie10

    This question was originally posted on the Answers forum -
    http://answers.microsoft.com/en-us/ie/forum/ie10-windows_7/how-to-set-compatibility-mode-for-a-single-site-in/187152e3-142a-4d96-8d1b-af82ef571eec
    I am having problem with getting ie10 to set ie9 compatibility for a single site (sharepoint.contoso.com).
    When I add this website in Compatibility View Settings (Alt > Tools > Compatibility View Settings > 'Add this Website') it adds the domain 'contoso.com' and not the individual website (sharepoint.contoso.com).
    This cause other sites (www.contoso.com) to be configured to use compatibility mode. Because this is a separate site (different web server) to the site sharepoint.contoso.com (sharepoint 2010 server) we need different compatibility settings.
    Using a different example to explain the issue -
    Microsoft has three websites that are different websites created by different developers written in different programming languages and they only work with certain browsers.
    microsoft.com (Website1 created by Developer1) - compatible with ie8/ie9/ie10
    msdn.microsoft.com (Website2 created by Developer2) - compatible with ie8/ie9
    technet.microsoft.com (Website3 website created by Developer3) - compatible only with ie10
    The only thing the three website share is the URL contains 'microsoft.com'.
    Marking 'msdn.microsoft.com' to run in compatibility mode affects the other 2 websites - mainly technet.microsoft.com which will not work now since it only runs in pure ie10 mode. 
    Should you be able to add an individual site to the compatibility list instead of all sites that have  .microsoft.com in the URL? Am I missing a simple setting in the ie10?
    As a workaround I am using the F12 Developer Tools to set the Browser Mode which temporary sets the compatibility mode. However this is not a nice solution to the end users at our organisation. 

    problem is not solved for non corporate environments...
    You could start your own thread.  Then if you got that answer and it was marked Answered you would have the ability to unmark it.  The OP of this one seems satisfied.  Also note that this is TechNet.  Consumers can get help on Answers
    forums.
    Robert Aldwinckle
    Oh! I wrote it wrong: I should have said: This is not solved for NON-AD environments. No demands what so ever to use Window 7/8 professional in a small corporation or on a big corporation with Island of smaller departments for example offshore.
    The problem is that the thread is not "Answered" by the OP, its is marked answered by a moderator (and same moderator that did the answer) so no way of telling if the OP is satisfied.
    But you are right in the fact that I am almost kidnapping the thread. But a complete answer would benefit all in this case I would presume.
    Regards
    /Aldus

  • How do I set the margins for a book in ibook author

    I am fairly new to Ibooks author and am having trouble figuring out how to set my margins to follow throughout the book.  I am making the book in landscape mode and want the hardcopy version to be 11 x 8.5.  I need the left margin to be set at 2.5 and no matter what I have done it skews the following pages.  I will publish this online but since this is going to be a family history book, I am going to have to export it eventually to PDF and send it to a printer.  Does anyone know how to change these settings?

    Thank you.  I just like the possibilities associated with Ibooks author.  But I will do that and maybe later transfer that data to Ibooks.
    Thanks again.

Maybe you are looking for