How to set PO status to 'Deleted'(I1040) Manually
Hi All,
We need to mark a PO in SRM for Deletion ie status(I1040) ,
can any one guide me with steps need to do the same.
Regards
Channappa Sajjanar
Hi ,
thanks a lot for your reply's
i have done it as follows.
Step1: first get the header guid of the PO from the BBP_PD.
Example: 4B1F0507B08F0604E10000000A0A3D25.
Step2:Go SE37 and enter the FM CRM_STATUS_UPDATE and press F8.
Step3:Enter the following detials into the JEST_INS table
table: JEST_INS
MANDT = 300.
OBJNR =4B1F0507B08F0604E10000000A0A3D25.
STAT = I1040.
and executed the FM.
the status of PO is updated in BBP_PD and inportal.
thanks once again for your help.
Regards
Channappa Sajjanar
Similar Messages
-
< MODERATOR: Message locked. Please read the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] before posting next time. Use an appropriate subject in your message thread. >
Hi ...
How to set custmer master blocked for posting & how to set the status has deleted. please provide the steps for the above two actions.
thanksHi,
U can use T-code FD05 for Blocking the customer and
T-code FD06 in order to set for deletion,
Assign Points if useful,
Regards, -
In Standard Report Of ALV How Can Set PF Status.
In Standard Report Of ALV How Can Set PF Status.
Thanking in anticipation.in the call function module, you pass the PF status parameter.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = pgm
<i> <u> i_callback_pf_status_set = 'SET_PF_STATUS'</u></i>
it_fieldcat = fieldcat
is_variant = disvariant
is_layout = layout
is_print = print
i_save = 'A'
it_events = eventcat
it_sort = sortcat
i_callback_user_command = 'USER_COMMAND'
TABLES
t_outtab = a_output
EXCEPTIONS
program_error = 1
OTHERS = 2.
ENDFORM. "LIST_DISPLAY
FORM SET_PF_STATUS *
FORM set_pf_status USING extab TYPE slis_t_extab.
SET PF-STATUS 'ZZSTD'.
ENDFORM. "set_pf_status
Here double Click on ZZSTD. IT will take you to a different screen and you have to set it.
Ster. -
How to set the status for a customer plan to RELEASED.
Hello all,
I created a program for mass creation of customer plans. But after the creation of a plan, the status should be set to released, so that the user can go about creating the trade promotions for the customer plan. Can anybody tell me how to set the status of a customer plan to RELEASED.
Thanks,
Disha.Hi Clemens,
I am not talking about doing it in the CRM_UI transaction..I created a program..which would create the customer plans based on the planning account data provided. I was succesfull in creating the plans, but I am not knowing how to release it, if only anybody can tell me about a Function module or method, which can help me do this, that would be great
Thanks,
Disha. -
How to set 'error' status with DB poll Adapter in OSB
1. Configured DB Adapter to poll rows with status 'notprocessed' and set the status to 'processed'
2. Configured FTP Adapter to write fetched rows from DB into a CSV file
Now my requirement is if any error like FTP server is not available, how to set the status in DB table to 'error'Yes Vlad you are right, this will avoid another DB connection created in Error Handler.
I hope this will provide some lights on the usefulness of "Transaction"
http://www.nysolutionsltd.com/transaction-handling-in-oracle-service-bus/
http://kd-blog-tech.blogspot.com.au/2010/12/transaction-management-for-osb-service.html
Regards
RK
Edited by: RK.. on 27/03/2013 17:10 -
How to Set User Status of Sales Order at item level.
How to Set User Status of Sales Order at item level by default to 'Purchase Req Not Created' (example)while creating order. Please tell EXIT Name to be triggered & Internal table to be populated.
Thanx,
Srini
Moderator message: please do your own research before asking.
Edited by: Thomas Zloch on Feb 21, 2011 11:19 AMMathew,
Here is a document that should help you get started on enhancing 2LIS_11*
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c09d5356-d8c4-2d10-8b84-d24723fc1f0a?QuickLink=index&overridelayout=true
Good luck! -
Hi
How to set the status of user defined form as "closed" . I have one form, i want that form should not be editable after one condition is true. Can anyone tell one solution
Advance Thanks
jintuHiii,
Use this
Sub FormDataEvent(ByRef BusinessObjectInfo As SAPbouiCOM.BusinessObjectInfo, ByRef BubbleEvent As Boolean)
Try
Select Case BusinessObjectInfo.EventType
Case SAPbouiCOM.BoEventTypes.et_FORM_DATA_ADD, SAPbouiCOM.BoEventTypes.et_FORM_DATA_UPDATE
If BusinessObjectInfo.BeforeAction = True Then
objForm = objMain.objApplication.Forms.Item(BusinessObjectInfo.FormUID)
ElseIf BusinessObjectInfo.ActionSuccess = True Then
If BusinessObjectInfo.EventType = SAPbouiCOM.BoEventTypes.et_FORM_DATA_UPDATE Then
End If
End If
Case SAPbouiCOM.BoEventTypes.et_FORM_DATA_LOAD
If BusinessObjectInfo.ActionSuccess = True Then
objForm = objMain.objApplication.Forms.Item(BusinessObjectInfo.FormUID)
objForm.Freeze(True)
If (objForm.Mode = SAPbouiCOM.BoFormMode.fm_OK_MODE) Then
if objForm.Item.Items("Status").Value.equals("Closed")= True
objForm.Mode = SAPbouiCOM.BoFormMode.fm_VIEW_MODE
End If
end if
End If
End Select
Catch ex As Exception
objMain.objApplication.StatusBar.SetText(ex.Message)
End Try
End Sub -
How to set workflow status when workflow manually cancelled?
Hi All,
When i manually cancelled designer workflow, then status comes as 'cancelled'. Instead i need to set different status. How to achieve this?
Thanks in advance!You can use this action
Set Workflow Status
This action is initially displayed in a workflow step as Set workflow status to Canceled. Use this action to set the status of the workflow. The default options are Canceled, Approved, and Rejected.
You can enter a new status value in the dropdown in the action. Once you enter a status value, the entry is automatically added to the dropdown list. For example, you can enter a status that is more user-friendly and informative than Completed or Canceled,
such as Expense Report Approved.
NOTES
You cannot rename or delete a status value once it has been created. However, you do not have to use it.
A custom status is applicable to the current workflow only, and cannot be used in another workflow.
A workflow cannot use custom status values that you define in the action if the action is used inside an impersonation step.
If the Set Workflow Status action is the last step in your workflow where you have also used a custom value, you can see your custom value in the Status column in
the list upon workflow pausing or completion.
Following is an example of what the action might look like in a workflow step,
Set workflow status to Specification status: Ready for Design Review
http://office.microsoft.com/en-in/sharepoint-designer-help/workflow-actions-in-sharepoint-designer-2010-a-quick-reference-guide-HA010376961.aspx
Mark ANSWER if this reply resolves your query, If helpful then VOTE HELPFUL
INSQLSERVER.COM
Mohammad Nizamuddin -
How to set window.status when returning to a page with back button/list?
It is easy enough to set window.status to application-oriented information when loading a page: do it in a function which is the onload handler for the page's body element. But, when returning to this window from another window with the second window's back button, or selecting the first window from the second window's back list, window.status gets set to browser-oriented information, usually the string "Done". Is there any means by which I can set window.status to application-oriented information when returning to the window via another window's back button/list? What would be really great is if there is an event handler like this:
window.onreturnviaback = onreturn_via_backhandler;
Any ideas?How about:
- (void)viewWillAppear:(BOOL)animated
I use that a lot. -
How to set the status when Idoc fails
Hai ,
I created Idoc extension & created a segment under that(Delivery related).
My requirement is,
if certain data not found,
Idoc should fail with text"Shipemnt for delivery <del. No> not found.
Could you please help me how to do this?
I checked the table EDIDC table but the above mentioned status is not there.
Thanks & Best Regards,
Bhaskar.you need to set the status using IDOC_STATUS
where ever error occurs populate the status table.
IDOC_STATUS-DOCNUM = IDOC_CONTRL-DOCNUM.
IDOC_STATUS-STATUS = '51' ." if it is inbound
IDOC_STATUS-MSGTY = Message-type.
IDOC_STATUS-MSGID = message-id.
IDOC_STATUS-MSGNO = message-MSGNR.
IDOC_STATUS-MSGV1 = message-MSGV1.
IDOC_STATUS-MSGV2 = message-MSGV2.
IDOC_STATUS-MSGV3 = message-MSGV3.
IDOC_STATUS-MSGV4 = message-MSGV4.
* IDOC_STATUS-SEGNUM = ?????????????????
* IDOC_STATUS-SEGFLD = ?????????????????
* IDOC_STATUS-UNAME = ?????????????????
IDOC_STATUS-REPID = SY-REPID
* IDOC_STATUS-ROUTID = ?????????????????
APPEND IDOC_STATUS. -
Hello,
I have a course built in Captivate 3 that automatically moves to completed within our LMS when users open it. How can I set the status to not change until users have gone through the entire course? Any ideas?
Thanks!Hi Shannon,
In our LMS this occurs if I add the SWF as a Flash file when I upload to the LMS. However, if I enable reporting on the Quiz Preferences pages in the Captivate file before publishing and then import it as a SCORM package in the LMS it uses the LMS customization settings on the Quiz Preferences page to track and set a completion status. -
How to set Callback Status in ALV OO
Hi All,
I need to find the method or object to use to set the callback status to my program so I may use forms that I have developed.
How do i do that?
thanks
KW
TRY.
CALL METHOD cl_salv_table=>factory
IMPORTING
r_salv_table = gr_alv
CHANGING
t_table = gt_dev_task_display.
PERFORM f_display_settings.
gr_alv->set_screen_status(
pfstatus = 'ZALV_STANDARD_KW'
report = sy-repid
set_functions = gr_alv->c_functions_all ). "set all basic ALV funtions
gr_events = gr_alv->get_event( ).
**... optimize the column widths
TRY.
lr_columns = gr_alv->get_columns( ).
lr_columns->set_optimize( 'X' ).
CATCH cx_salv_not_found. "#EC NO_HANDLER
ENDTRY.
* get layout object
lo_layout = gr_alv->get_layout( ).
* set Layout save restriction
* 1. Set Layout Key .. Unique key identifies the Differenet ALVs
ls_key-report = sy-repid.
lo_layout->set_key( ls_key ).
* 2. Remove Save layout the restriction.
lo_layout->set_save_restriction( if_salv_c_layout=>restrict_none ).
lo_layout->set_default( abap_true ).
gr_functions = gr_alv->get_functions( ).
gr_functions->set_all('X').
gr_functions->set_group_filter( value = if_salv_c_bool_sap=>false ).
gr_alv->get_display_settings( ).
gr_alv->display( ).
CATCH cx_salv_msg.
MESSAGE 'ALV Display Not possible'(w02) TYPE 'I' DISPLAY LIKE 'E'.
ENDTRY.Namish,
thank you for the reply.
I have created the handle class but the issue I am having is in the PAI becuase the callback status is not set it keep going back to the SAPLSVC_FULLSCREEN pai and not to the PAI that I would like.
What I am trying to achieve can be done with this code:
* call list viever
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_user_command = gc_user_command
i_callback_pf_status_set = gc_pf_status
I_BYPASSING_BUFFER = 'X'
i_background_id = 'ALV_BACKGROUND'
i_callback_program = gv_repid
i_default = 'N' "use gs_variant
it_event_exit = gt_event_exit
it_fieldcat = gt_fieldcat
is_layout = gs_layout
i_save = gv_save
is_variant = gs_variant
it_special_groups = gt_special_groups
TABLES
* t_outtab = gt_report_list.
t_outtab = gt_report_list2.
the variable gc_user_command will bring it back to my calling program USER_COMMAND, this is what I am trying to achieve in OO
Thank you! -
How to set ascential status "not aborted" when no file is present
Hi gurus,
Can anyone advise how can i set up the job in ascential to by pass the abort status whenever i have no file in place. Normally what happened is, the job is triggered everyday and when a file has missed to maintain in the defined directory, it gets aborted. What the requirement is to set to not aborted status so that when the next run in BW is triggered, we dont need to go to admin to reset the job every so often..
Thansk..Hi there,
why don't you just add the following lines into your coding, at the stage where the file is selected?
IF.
sy-subrc <> 0.
EXIT.
ENDIF.
In case you don't have developing authorization just get anybody who can do this for you.
Kind regards
Klaus -
How to set HTTP status codes from BSP
Hello,
How can I set the HTTP status code from a BSP?
I use response->set_status( code = 500 reason = 'Error') from OnInputProcessing event, but nothing happens...
Tia,
JoergHi,
Thank you for the references, but unfortunately it still does not work for me.
Here's what I do in my BSP:
- The BSP displays a simple Form in which some user data
can be entered.
- In the OnInputProcessing event handler of this BSP the
data is analyzed. If there is an error, the following
code is executed:
if l_error eq 'X'.
data:
res type ref to if_http_response.
res = runtime->server->response.
res->set_status( code = 500
reason = 'Internal error' ).
endif.
- I would expect the Browser to display the error page,
however I simply get the BSP Form again - the HTTP
error is not shown at all.
What am I doing wrong?
Thanks, Joerg -
How to set quality status of a request in an infocube by a function module
Hi folks,
in the maintenance of an infocube you have the possibility to go to a dialog called "maintenance of the automatism". That dialog allows you to set a flag therewith the quality status of a processed request is set automatically to green.
Does anybody know how to do that with a function modul or which tables have to be updated in order to do that by a litte ABAP?
Thanks+Cheers, ThomasHi Bhanu,
thanks for that one, pretty helpful.
Think of the following scenario:
1. untick the automatic setting of the quality status
2. load 4 requests into the infocube
3. once last request has been loaded tick the automatic setting of quality status
would that mean that once the status flag is ticked all 4 requests become available for reporting?
Cheers, Thomas
Maybe you are looking for
-
How to display rich content with URL in adobe flash builder and flex for mobile apps?
Hi, In Apple IOS SDK, I used the WebView control to display the rich text with Bullets, different font style, images within the text and the URLs also within the text as HTML content. Clicking on the URLs automatically opens the respective webpage
-
please help
-
Is there a way to cut and paste columns in a table in CS5? I need to swap the position of two table columns in a document with numerous tables. The tables are complete and the colums I need to swap are of different widths. Is there a way to cut the
-
Hi Experts Team, My scenario is IDoc to File interface. I need to create 12 different files based on the Plant code (WERKS). At the end of the day, i need to ftp the file to different locations. How can I do the design and is there any need for BPM h
-
Using Flash components as Widgets
I'm liking much of the functionality (and prettiness!) gained by third-party Flash components (www.flashden.net, www.flashcomponents.net, etc) that I'd like to incorporate into Captivate lessons. Being a Flash and Captivate newbie, I haven't yet brok