How to set regions to the same size

Hi,
Is there any way I can set all the regions on a page to the same size to prevent a staggering effect?
e.g
------ region title 1 ------
------------ region title 2 ------------
--- region title 3 ---
I would like all titles to be the same length when looking down a page
e.g
------ region title 1 -------
------ region title 2 -------
------ region title 3 -------
What I have done in the interim is to create blank cells in each region, between the actual fields and then use nbsp; to pad them out and try and get the region headers to align that way. I am assuming there must be an easier way.
eg.
------ region title 1 -------
| field | blank | field | blank
------ region title 2 -------
| field | blank | field | blank
------ region title 2 -------
| field | blank | blank | blank
Any help would be appreciated.
Cheers,
Scott.

Hi,
Where can I post a screen shot of my form layout?
In the meantime, let me explain again. What I was trying to say is, depending on how many fields that exist within a region, a region will size to the largest fields it contains, depending on how the fields are layed out within the region.
Since I have 5 regions on my page going from top to bottom, what I am finding is that the regions are of different sizes, and I would like to make them all the same size, irrelevant of the largest field size it contains.
The overall effect will be that the region titles will all line up on both the left and right handsides as a user scrolls down the page.
If there is a way of acheiving this could you please let me know.
Cheers,
Scott.

Similar Messages

  • How can two pictures of the same size still appear to be a different size? (Photoshop CS6 problem)

    I called the big webdesign file "(X)" and the image I wanted to paste in it "(Y)",
    so that you won't be confused when you read it.
    What Happened
    For the design of a webpage, I made a photoshop-file(X) with a lot of squares(X). These squares(X) had the size 9,42×9,42 centimeters.
    I measured the squares(X) carefully and also made sure the size was in centimeters, so I am sure that the size was 9,42×9,42 cm.
    My plan was to fill the squares(X) with pictures(Y). I had a map on my computer with a lot of square-sized JPG-images(Y) in it. All I had
    to do was open the pictures(Y) in photoshop, change the size into 9,42×9,42 centimeters and copy+paste them into the squares(X)
    of the webdesign. I did this before and it worked perfectly.
    But then, I opened one of the images(Y) and when I wanted to resize it, the resize-tool said it was only 3,25×3,25 centimeters big.
    I thought it was strange, so I copied+pasted it into the design-file(X) with all the squares(X) that needed to be filled. Allthough photoshop
    had told me that the squares(X) in the file were 9,42×9,42 centimeters big and the image(Y) I resized was 3,25×3,25, the "small" image(Y)
    turned out to be bigger then the squares(X). And when I resized the "small" image(Y) into 9,42×9,42 centimeters, it was even bigger
    than it was before. How can this be, and how can I still make the images(X&Y) the same size?
    What I already tried
    - I made the file of the webdesign(X) with all the squares(X) into one layer, copied the file(X) and opened a new file(X) with the same
    measurements of the old file(X). I also changed the resolution of the file(X) into pixels/centimeters instead of pixels/inches.
    Then I pasted the image(X) of the old file into the new file. I didn't work; the image(X) that I pasted in the new file was bigger and
    when I pasted the other picture(Y) in this image, the same problem was still there.
    - I also opened the picture(Y) in photoshop, made a screenshot of it and then pasted the screenshot into paint. With paint I cropped
    it again and saved it as a JPEG-file. After that, I opened the image (Y) in photoshop again. It now had the size of 11,27×11,27 centimeters.
    Then I resized the image(Y) into 9,42×9,42 cm, but it still wasn't as big as the squares(X).
    Could you help me please?
    I really don't understand why this problem is happening and I can't think of a solution because I am still quite unexperienced with photoshop
    and I also couldn't find the answer on the internet. I assume the solution is very simple, but I haven't found it yet allthough I have to finish this
    project soon and I also have to use the image(Y). So any help would be very appreciated.
    Thanks,
    Simone

    You need to understand the basic of a digital image.
    Image is recorded as pixels and image is a rectangle so many pixels wide and so many pixel high.   Pixels do not have a fixed size. The images resolution setting defines the image current pixel size.
    So for example if you have and image that is 300 pixel wide and 200 pixels high and set its dip resolution to 100DPI the image size is 3" wide and 2" high.  Set its dip setting tp 300DPI the image size becomes 1" wide by 2/3" high.  Both the 3" x 2" and the 1"x2/3" images have the same 60000 RGB Colored Pixels.
    Web pages are sized to to be so many pixel wide and so many pixel high.  Often the height is not enforced scrolling is used when viewing. 
    However image for web pages often must not exceed so many pixel wide and high for displays have a fixed resolution and a fixed number of Pixels. You want images to fit on users displays.  Users use different displays some have high resolution displays and other have low resolution displays with far fewer pixels then high resolution displays.
    Web Image are normally image that have been interpolated down in number of pixels a resampled large image so that web image will fit on a low resolution  display with limited number of pixels. The image size the user see depend on the display they are currently using. A low resolution display's image will be much larger then the same image displayed on a nexus 10 with a 300dip display. Cheep low cost Desktop LCD have a 84DIP resolution, large high cost desktop displays are not be much higher in resolution somewhere near 108DPI.   Tablets, Laptop and Phones can have much higher resolution like the nexus 10 300DPI IPS display

  • How to put pictures in the same size (adjustment) ?

    Good afternoon everyone
    I have a problem.
    I did a fla with 3 components images (loader), and a button.
    I would like to know what code would use so that when I click on the button I load the 3 images but adjustable, is said to be in the same size.
    When I export to swf. everything looks good. the photos are adjusted to your size. but when I upload it to the internet, my hosting, the photos are great and are not adjusted.
    What would be the problem and what solution do?
    Wait for a response
    regards
    Roger García

    I don't Understand
    I have a button and the code I have is this included:
    on (press) {
    _root.boton1.imagen_mc1.load("4.jpg");
    _root.boton2.imagen_mc2.load("5.jpg");
    _root.boton3.imagen_mc3.load("6.jpg");
    stage.scaleMode = StageScaleMode.EXACT_FIT
    stage.scaleMode = StageScaleMode.NO_BORDER
    a Help ....... 
    A greeting.
    Roger García

  • How to make frames all the same size?

    Any script for how to make several pictures sitting in exactly same size frame?

    Does anybody understand what I mean?

  • How can I enlarge my tabs and keep them the way I set them? My page zooms in and out but my file, bookmarks, etc. tabs stay the same size.

    using the view tab, I select Zoom. Zoom in only increases appearance of web page. The tabs (File, Edit, View, History, Bookmarks, Tools and Help) all remain the same size! Way too small to read! This sucks and I don't LIKE IT!

    That sounds very handy. Nice going. A kind of backup would be to
    create a folder in the Bookmarks Manager, and keep a list of links there.
    Just one note. The sessionstore file shows the last windows / tabs that
    are open. Because the window with the 90 tabs was closed first, then the
    other, that is what caused your issue.
    Please edit the post title by adding '''==Solved==''' to it. Others may think
    you are asking for help, not offering a solution.

  • On a MBP with Mavericks how do I get the Save As dialog box to open at the same size and place at which it was last closed and used to happen before Mavericks?

    Before I upgraded my MBP to Mavericks, the Save As dialog box would reopen at the same size and position as it was when last closed.  Now with Mavericks it always opens in the same position at a very small size.  Is there a way to make it reopen at the last place and size at which it was closed?

    I have resolved the issues presented without having to find and uninstall the Macromedia Flash Player 8.0 in order to get "Adobe Flash Player 10" playback of .swf files on my computer. When I begin this task, I expected to download an "Adobe Flash Player 10" as a player program download instead of the Internet Explorer and Firefox plugin that it appears to be.
    This is what I did and what I believe I have:
    1. I setup Internet Explorer 6 as my default browser and then used the following site to download Adobe Flash Player 10
    http://www.adobe.com/products/flashplayer/
    2. As I had done before (and also suggested in another thread here), I went to Tools/Manage Add Ons and found Shockwave Flash Object, highlighted it, and clicked on Update Active X. Next, what I did not do before, I restarted the computer immediately after that.
    3. Next, I set Mozilla Firefox as my default browser and then used the above site to download Adobe Flash Player 10 again.
    4. With Firefox, the critical step included Firefox Tools/Options/Content with File Types (Configure how Firefox handles certain types of files) and the Manage Tab there. SWF Shockware Flash Object/Change Action/and dotting "use this plugin" - Shockwave Flash, followed by a computer restart got the job done.
    Now, if I want playback of a .swf file, I can
    a. Open With Internet Explorer (assumed with the Adobe Flash 10 "plugin")
    b. Open With Mozilla Firefox (assumed with the Adobe Flash 10 "plugin")
    c. Open With Macromedia Flash Player 8.0
    I am satisfied with those results for my use. Any additional comments on the player vs plugin aspect of the matter would be interesting and helpful.
    ATR

  • How do you find the size of a current layer so you can make other layers the same size

    When I have an PSD icon set and I want to size a layer to a size that looks good.  How do I see the dimentions of that layer so that I can select another layer and make it the same size.

    well that's my point Chris.  I have a PSD that has 150 icons in it.  I want to take 5 of them and make them the same size 300 x 300 from the 180 that they are.
    If I select one and then press Apple T, I can see that it is 180 x 180 in the info window.  I can then go to the transform bar at the top where it says 100% x 100% and type in 180px then 180px in the other.
    Chris Cox wrote:
    Or duplicate the layer and replace the contents...
    Then repeat for the other 4 layers.  Is this the correct way (easiest?)  How do you replace the layer after duplicating it.

  • How to use the function STRIP SILENCE on many regions at the same time?

    Hi,
    I am doing a projet with a lot (more thant 100) of audio regions, and I would like to use the function STRIP SILENCE on many regions at the same time (with the same parameters).
    Here is what happens :
    1- I select many regions (10 or so)
    2- I choose the function STRIP SILENCE in the AUDIO menu
    3- the window for stripping silence opens, and it tells me in it that there are 10 regions selected (if I selected 10)
    4- I put my parameters, then I click OK
    5- Only the first regions is done! all other regions are untouched.
    So... it this a bug or a feature? What am I doing wrong? Is it really working on multiple regions at the same time? If not, how could I do that besides doing the same operations 100 times!
    Could that be on the Intel bug that I see quite often ("it works on old Mac but not on Intel Mac")?
    Thanks,
    Daniel

    I think the message you get saying that 10 regions have been selected is not so much a bug as an oversight ---- someone didn't check to correlate the message with the actual functionality of strip silence (i.e., will only work on one region at a time).
    So the message is misleading.
    I find that it's best to set up a key command to perform the strip silence function. Makes the process go faster than having to mouse around. And I rarely find that the strip silence settings for one region work well on another, so I don't mind the fact that it only works to strip one region at a time.
    Sure, it would be cool if it performed the operation on multiple regions, but by using the same set of s/silence parameters for all regions there's always the chance that you might accidentally crop a region in the wrong way, meaning more time spent editing the beginning/end of those regions.

  • I'd like to limit the Firefox window to the same size as my website...how can I do that?

    I'd like to limit the Firefox window to the same size as my website...how can I do that?

    Sorry, that isn't possible any more in Firefox, except for pop-up windows that a web site opens itself, and that can be overridden by the user with a simple preference setting in Options.
    Users can't change or set the window size in their own browser from the URL bar any longer, they have to do it via the Scratch Pad in Web Developer menu under the Firefox button.

  • I am trying to print a PDF file to a legal size paper and I would like for it to fill up the page. How do I do this? I went into the settings and changed it from letter to legal, but it's still printing out the same size. Can someone help me, please?

    I am trying to print a PDF file to a legal size paper and I would like for it to fill up the page. How do I do this? I went into the settings and changed it from letter to legal, but it's still printing out the same size. Can someone help me, please?

    Are you trying to Print to PDF or are you trying to Print a PDF file to a physical printer?

  • How to make a link in a report open a Form in a different region of the same page ?

    Hi,
    I developped a report and a form for the same table. I also created a link and used it in my report so that when I click on the link of one record, the form is opened and display this record.
    My problem is that when I include my report as a portlet and I click on a link, the form is opened in full screen mode by replacing the page containing my report.
    What should I do in order to open this form in another region of the same page ?
    Thanks a lot

    I presume that the two regions are working fine with their individual buttons and your issue is how to make them both save with one button.
    Here is how
    a. You will have 2 ApplyMRU and 1 ApplyMRD processes for each of the regions. Right? Lets say you have 2 "Save" (i.e. label=Save) buttons, one has name SUBMIT and the other SAVE ( SUBMIT and SAVE being the requests that will be sent when they are clicked , respectively)
    b. Make the Display condition on one of the buttons 'Never'. Now it won't show when you run the page. Lets say you made SAVE's conditional Display 'Never'
    c. Go and change the condition on all ApplyMRU and ApplyMRD processes from "When Button Pressed" to "Request is contains in Expression1". In Expression1 enter SUBMIT,SAVERegards

  • How do I make selective screenshot images in cells the same size?

    I am putting together a spreadsheet to list the purchasing options for our company from some of the Mac mini models but have a problem with image sizes in spreadsheet cells.
    First I took screenshots of each of the price and spec panels of the self-configured options I was interested in recommending using CmdCtrl+Shift4 to save the screenshot to the clipboard. Next, I highlighted the cell into which the image was destined to go and clicked Cmd+V and the image appeared in the cell (as an image fill for background colour). I repeated this process for six different Mac minis, being careful to start and finish the crosshairs in exactly the same place for each option. Each of these images had been lifted from a separate Tab in Safari 4.0.5 and appeared to be identically sized.
    The problem is, when placed in the spreadsheet cell grid, each image was either higher or lower than the one next to it, yet all cells were the exact same size. Some images appeared to be centred in the cell, others appeared to be top aligned.
    Can anyone help me to understand why this happens, and to give a suggestion on how to avoid it in the future?
    TIA

    OK, my mistake! The images were not the same size because the specs were different for each one, meaning that the info boxes were of different heights. When I copied them again, using the coordinates to ensure the screenshots were exactly the same size this time (rather than adding on a fixed width to the outside of the boxes) the problem was solved.
    Sometimes it's the user not the tools that has the problem!
    Having said that, it would be useful if the images were not background fills, but images that you could highlight because that would show quite quickly the size of each one - and allow you to add a background colour to a column to indicate a category type.
    Thanks for your help!

  • How to resize watermark to be the same size for vertical/horizontal images?

    I am using File -> Place menu to place my watermark onto the images. 
    No matter what I try so far, the absolute size of the watermark comes out different Portrait/Landscape images.
    Watermark is smaller on Portrait and larger on Landscape images.  I tried resizing writing in the number of pixels during the File->place command, but no luck.  Photoshop resizes the watermark based on the percentages, and I don't know why image orientation matters. 
    ideally I want my watermark to be the same size, and I can use absolute pixel dimensions if needed.  How do I do this?

    Hi Doug - What exactly are you trying to do? Is the third
    child being added dynamically, and you want it added above the
    first child? If so, you can use the addChildAt() method when adding
    the child to the container. addChildAt() takes an index and the
    child object is added at that index and all other children are
    reshuffled to maintain the ordering. IE:
    <?xml version="1.0" encoding="utf-8"?>
    <mx:Application xmlns:mx="
    http://www.adobe.com/2006/mxml"
    layout="vertical">
    <mx:TitleWindow layout="vertical" id="tw">
    <mx:Button id="a" />
    <mx:Button id="b" click="go();"/>
    </mx:TitleWindow>
    <mx:Script>
    <![CDATA[
    private function go():void
    var c:Button = new Button();
    c.label="new";
    tw.addChildAt(c, 0);
    ]]>
    </mx:Script>
    </mx:Application>
    Does that help, or am I misinterpreting what you're trying to
    do?

  • HT4314 I have two ipods in my house that were set up under the same email.  I have since assigned two different emails.  How can I change the game center account so that is not shared by both ipods because it is for two different users and they are not ha

    I have two ipods in my house that were set up under the same email.  I have since assigned two different emails.  How can I change the game center account so that is not shared by both ipods because it is for two different users and they are not happy?

    By "game center account", do you mean Apple ID?
    If so, you can change it.
    1. Tap settings and navigate to iTunes and App Stores
    2. Tap "Apple ID" and then tap "Sign Out"
    3. Log in with a different ID.

  • How do I make icons bigger? All icons are way too small for speedy use. no matter what I do they remain too small. Is there a way of getting them the same size as previous versions?

    All icons, such as refresh page, back, forward, stop and home etc; are just too small for comfortable use. For now I am uninstalling Firefox 4 and going back to 3.x. even the zoom page icons are too small.

    "I had read that GarageBand or the Musical Typing there can sometimes not display properly when the resolution is changed."
    Well, did you checked GB after you changed your resolution?
    Which setting did you change to?
    You & I have the same size iMac screen. My resolution setting is 1280x800. Everything fits perfectly in the windows & on desktop including the menu bar.
    All info in my windows are showing. I did not need to adjust my browser font size settings. I am sure you are aware of the browser font size settings. I use FF & the settings are in Preferences>Content.
    In the Finder window you can enlarge the icons & fonts also.
    Finder>View>Show View Options.

Maybe you are looking for