How to set 'replies sent to' in BCS

Hi guys,
we use sender mail addresses that are no located in our CRM system. This is great as our customers receives mails from our known mail addresses. But we run into application issues if the mail does not reach the receiver an no-delivery-reply (NDR) is generated. This mail is unfortunately always routed to the set sender mail address.
My idea to solve this issue is
- to use a CRM mail address as sender and
- to set the sender mail address to the mail option 'replies sent to'.
Unfortunately I could not find a property in BCS for this option. Any help is appreciated.
Best regards,
Gerald

Hi,
For setting up the sender
      call method send_request->set_document( document ).
      sender = cl_sapuser_bcs=>create( sy-uname ). " Change with your CRM user
      call method send_request->set_sender
        exporting
          i_sender = sender.
For getting return receipts
  call method send_request->set_status_attributes
    exporting
      i_requested_status = 'N'
      i_status_mail      = 'E'.
Note: Please confirm with your basis team whether SCOT has been set for getting receipts, for security reasons return receipts will not be allowed in Production servers,otherwise if you have a separate message server then not problem
a®

Similar Messages

  • How to do signature sent from iphone

    how to set signature sent from iphone for whats app messages

    Settings > Mail..... > (scroll down) Signature >

  • How to set name of file to be sent through mail

    hi ,
    i am using FM  'SO_DOCUMENT_SEND_API1'  for sending some file.
    now my question is how to set  the name of file to be sent?
    thanks

    Hi Rahul
    Check this link
    Sending E-Mail from ABAP - Version 610 and Higher - BCS Interface
    Re: How to send mail to with in SAP !!
    Regards,
    Syf
    Edited by: syfulla shaik on Dec 22, 2008 10:44 AM

  • How to set content-type for outbound mail in BCS

    Hey everybody,
    can anybody please give me a hint how to set the content-type for outbound email in ABAP using BCS to send mail.
    By default the content tyoe is set to text/html. I need other.
    Best regards
    Roman

    //add related mutip-part to combine parts
    MimeMultipart multipart = new MimeMultipart("related");
    //attach a pdf
    messageBodyPart = new MimeBodyPart();
    fds = new FileDataSource("h:/something.pdf");
    messageBodyPart.setDataHandler(new DataHandler(fds));
    messageBodyPart.setFileName(fds.getName());
    multipart.addBodyPart(messageBodyPart);
    //add multipart to the message
    message.setContent(multipart);
    //send message
    Transport.send(message);

  • How do set up your hotmail account on a mac book pro? I have it set up so I get mail but on my hotmail account I have lot of separate folders. They don't show up on my mac, they do on my iPhone and iPad.

    How do set up your hotmail account on a mac book pro properly? I have it set up so I get mail but on my hotmail account I have lot of separate folders to save messages in(for example :- bank, skyp, work, Facebook, apple, ect...). They don't show up on my mac. I also have an iPhone and iPad, there is no issue here when I set those up. I automatically got my separate folders. Anybody have any idea or encountered the same problem?

    Leuvy13 wrote:
    Cheers,
    I'm not gonna lie, I actually have no idea if its pop or imap. Do you know where you can check and if it can be changed?
    Hotmail on a Mac is POP3 only, you will only get the basic folders (inbox, sent, trash etc) and it will not sync with other devices.
    And now I post this I see other replies, so this is redundant. !!

  • How to set one default "reply-to" email address for multiple accounts

    I have an iPhone 3GS. I have my own domain name which I want to use as my primary "public" email address. It is forwarded from the hosting ISP to my ATT/Yahoo email address. I also have a Gmail account. I would like recipients to see that it comes from my domain ([email protected]), but since it is actually going through ATT/Yahoo, I can only see how to set the "From" field to either my ATT/Yahoo account or my Gmail account addresses. Is this even possible?
    Essentially, I don't directly access "[email protected]", but that's where I want it to appear to come from, regardless of where it actually originated.
    Any ideas?
    Thanks,
    Mark

    You get e-mails just fine, but do you have rights to log into the e-mail server at myfirstandlastname.com? If you can do that (check with your hosting ISP to find out if they will let you), then you can just set up the iPhone to use that e-mail server to send your mail. It's possible to set up an iPhone IMAP account to get mail from gmail, but use a separate non-gmail SMTP server to send outgoing mail, all within the same iPhone e-mail account.
    If you can get this working, then you won't need to mess with reply-to headers. Your e-mail will not only look like it got sent from myfirstandlastname.com -- it actually WILL be sent from there and all replies will automatically go there and then be forwarded as usual to your ATT/Yahoo address. No one will know that ATT/Yahoo is involved, and both your sent and received e-mail will show up in the same single e-mail account on the iPhone.
    I do this all the time with my e-mail. My account is really at gmail, but the e-mail address says it came from mycollege.edu. My old college offers me an alumni forwarding-for-life account. They only forward mail, though; they don't hold it. They do also run an SMTP server, though, and that's what I use to make my outgoing e-mail look as if it came from mycollege.edu.

  • How to set up domain mail forwarding

    Greeting gurus.
    I am a BT Business Broadband custome and BT also host my domain.
    I am terminating my Boradband service next week but the domain is not for renewal until 2012.
    I have trying to find how to set  up mail forwarding for the domain.
    I would like all mail addressed to [email protected] -> [email protected]
    Replies can then be sent from the appropriate domain.
    The reason is that mydomain.com is effectively being mothballed, but I wish to ensure that any mail does not just get lost.
    I am on the support line but wanted to know if anyone can help me quicker.
    thanks.
    ps: this is my first post so be gentle with me!

    The business forums would be a better place for this.
    http://business.forums.bt.com/
    I've not hosted a domain with BT, but all the other domain registration/hosting companies I've used have a browser based control panel where these things are configured.
    You say the domain is being mothballed. You'll have to continue with the registration though, and BT claim to offer email with all domain registrations, so why not just carry on as you are ?

  • Font issue - in all my replies, sent and forwarders the font is different size and style.

    font issue - in all my replies, sent and forwarders the font is different size and style. Sometimes it changes while I am typing in mid sentence. I tried to adjust using tools, options, advanced. But nothing seems to stick. How can I make all emails have same font style and size?

    I do not know how up to date this is, but there are menus listed in how the message displays when you compose and open an email. [http://kb.mozillazine.org/Font_settings_in_Thunderbird#Message_display] That may help you set the preferences.

  • How to set up Airport Express to extend Buffalo WHR HP 54g wireless router

    Contrary to what official Apple policy is, it is possible to use Airport Express as a remote repeater using a Buffalo router.
    I sent hours setting up this network and wish to share what I learned
    I only wanted to use the Airport Express as a repeater to distribute the internet to the far reaches of the house--no iTunes, no Printer, and I did not bother setting security.  If you want to add any of those features please make sure that the basic setup is working as described below.  I have no idea how to successfully set up these features.  My advice is to search the internet for guidance.
    Anyway:  how to set up the Buffalo wireless access router to work with Airport Express
    Setting up the Buffalo:
    From the routers home page of 192.168.11.1, hit the "advanced" box at the top
    1.     Go the "Wireless config"   "basic" item.  Give name to your network (spaces are allowed), lets call it "WIRENAME" and select wireless channel 1 or 6 or 11. These channels have the least interference and will tend to work when the others do not.
    2.     Go the the "repeater" item under Wireless config.  . " Enable" repeater/bridge (WDS).  Next register the MAC address of the Airport Express.  Record both the LAN and Wireless MAC addresses. 
    That is about it.  Your Buffalo system Info page should look like this
    Model             
    WHR-HP-G54 Ver.1.40        (1.0.37-1.08-1.04)                       
                        AirStation Name              AP001D73DEB2D6                    Operational Mode                Router Mode                    WAN                                                                                                                                                                                                                                                                                                                                                                                                      
    DHCP
    Connection Status
    Communicating
    Operation
    IP Address
    myinfo
    Subnet Mask
    255.255.255.248 
    Default Gateway
    my info(Via DHCP)
    DNS1(Primary)
    my info (Via DHCP)
    DNS2(Secondary)
    my info (Via DHCP)
    Host Name
    my info (Manual Setup)                  
    Domain Name
    earthlink.net (Via DHCP)
    MTU Size
    1500
    DHCP Server Address
    10.108.48.1
    Lease Acquired Time
    2006/01/04 12:03:15
    Lease Period
    2006/01/05 12:03:15
    Wired Link
    100Base-TX                                (Full-duplex)                          
    MAC Address
    00:1D:73:xx:xx:xx
                        LAN                                                                                                                                                                                                                     
    IP Address
    192.168.11.1
    Subnet Mask
    255.255.255.0
    DHCP Server
    Enabled
    MAC Address
    your address recorded in the repeater tab
                   Wireless(802.11g)                                                                                                                                                                                                                                                                                    
    Wireless Status
    Enabled           
    SSID
                                          WIRENAME
    Encryption Mode
    Not Configured           
    Wireless Channel
    11Channel                 (Manual)           
    125* High Speed Mode
                                 Disabled           
    MAC Address
    your address recorded in the repeater tab
    For the Airport express: here is a summary of what the settings are:  Start Airport Express Utility and when it comes up
    Select "Manual" setup
    On the Base station tab:  Give Airport Express a name, any name and any password.  Do not select the box:  Allow setup over the internet with Bonjour
    On the wireless tab:  Wireless mode: Participate in a WDS network
    Network name:  the name you gave in the Buffalo router: EG:  WIRENAME
    Radio mode: 802.11n(802.11b/g compatible)
    Channel : the same as you set in the Buffalo
    Wireless security: None
    WDS tab:  WDS mode: WDS remote
    Check: allow wireless clients
    WDS main: the MAC address of the wireless (not LAN) side of the Buffalo router
    Access control tab: MAC address access control: Not enabled
    At the top of the control box , click on the Internet icon
         Internet connection: Connection sharing: Off (Bridge Mode)
         TCP/IP: Configure iPV4 : Using DHCP
         I put in the address of the DNS servers listed on the Buffalo System info page above.
    At the top of the control box Music Icon: I did not enable AirTunes
    Printer icon: did not set this up
    Advanced icon: leave every thing alone
    That is it.  Just do everything as above and your Airport Express will act as a repeater.  (And save yourself a couple of days struggle.)
    Phil

    Many thanks for the info.
    In case you were not aware,the following list of Apple WDS compatible devices has appeared on numerous sites and in numerous Internet links and articles regarding this subject:
    3com OfficeConnect ADSL Wireless 11g Firewall Router model 3crwdr100a-72 but ONLY with NO encryption
    Belkin F5D7230-4 and F5D7231
    BT Voyager 2091 or 2100
    Buffalo WGR-G54
    Linksys WRT54G or WRT54GS (though v4)
    Netgear WGR614 v6

  • How to set up SAPconnect with email server

    Hi,
    Does any one know <b>how to set up SAPconnect with email server</b>
    We are using workflow and when it fails it we are sending the notification mail to the user on his company mail id, i.e. [email protected]
    This is working in the current production system. We are doing the new development which will replace the current production system. The existing Basis team does not know how it was setup in production system and how to set it up in the new system.
    When we send any mail notification from workflow we can see the mail in SCOT transaction but it is not received at the specified mail address.
    Can any one provide the configuration steps or any document for this.
    Thanks in advance..
    Pratik

    Hi Pratik,
    Check the following link:-
    /people/thomas.jung3/blog/2004/09/08/sending-e-mail-from-abap--version-610-and-higher--bcs-interface
    http://help.sap.com/saphelp_nw04/helpdata/en/2b/d925bf4b8a11d1894c0000e8323c4f/frameset.htm
    these link will help u to config SMTP.
    And one more thing u have to do..
    Go to SE11 n open Table sxnodes in change mode.
    And change F_ESMTP field to false i.e. BLANK for the Field NODE = SMTP.
    Hope this will work For U.
    Regards
    Sachin Dhingra

  • How to set up basic POP email on N8

    I've been reading up on all the email discussions about the N8, and it seems like some things work fine, while others need more development.
    In my case, I would like to set up email using a basic POP email account setup.  I have no need for "push" email right now - as I see it, receiving an email every half hour or so on my phone is an improvement over waiting until I get to my PC.
    Ideally, I would like to leave the messages on my email server, so they will later on be downloaded to my PC.
    I've noticed the following in one of the email discussions here:
    "Cant believe no one else has responded with this before given the time this thread spans. I had this problem until I deleted and re-created my email (POP) accounts and then NOT accept the TOS at the end of the setup process. If you say YES and accept the terms, then your email accts get setup thru the Nokia messaging service and sent emails may get saved somewhere, but certainly not on the phone. You do not have to say yes to the TOS, just decline and finish setting up the email account."
    Since I'm perfectly happy with the way email works on my laptop, using my existing servers, I think I should decline the TOS as described above.
    I've found lots of guides on how to set up email on the N8.  Can anyone here recommend one for how to do (only) what I need, in order to manually set up POP email on a N8, using the identical server information and settings that I now have on my laptop?  Or, if this doesn't exist, can someone post the necessary steps here?
    Thanks!!!

    I have had a little play with this but will just outline what I found seems to happen because I did not thoroughly test it. Others experiences may be different.
    If setting up a new account and one selects one of the listed email service providers and not "Other" then it sets up an IMAP account and gives the choices that Rayhipkiss describes together with the terms and conditions acceptance request. This can be seen after the setting up by looking in the settings for the server (which often, maybe always?, is a nokia.supl.imap one). If one deletes the server and server ports and replaces them with the same email service provider's pop and smtp servers and ports then the same setup choices that Ray mentions still remain. Once the account is set up you can always go back and change the server and port entries in the N8 setup for that account (see below for a difference).
    However, even though one has set the pop ports it still seems to do an imap connection - this can be tested by setting up a Gmail account where one can turn off and on allowing imap server connections in the settings on ones Gmail account's setting on the webmail site. One finds that disallowing imap connections but allowing pop connections blocks the N8 even if one has entered the pop servers and ports on the N8.
    Now, if when setting up the account on the N8 one selects "Other" it normally (see below) gets one to enter the address and pass for the account and then goes straight to allowing you to enter the servers and ports. Now if one enters these and it then takes one straight to the client for you to collect and send email. But now if you go back into settings for that account one gets the setting choices that I outlined i.e. the one that includes "Don't sync to server". If set up as a pop account it seems to behave as a pop account - for example, if one turns on the imap servers at the Gmail denying pop connections then if one tries to collect mail Gmail comes back with a certificate error (the certificate is for imap not pop). Unlike the settings menu giving the other settings Ray outlines this settings menu does not allow one to nominate a reply to address different to the address sent from and nor does it allow one to go back and change the server and ports. To change the server and ports as far as I can see if set up this way one has to reset up the account from the start.
    OK, even stranger, then what I found is if I set up an account using the offered service providers, not using the "Other" choice then deleted that account and then reset up the same account using the "Other" choice it then behaved as Ray outlines including the terms and conditions acceptance request and also behaves as an imap account even if one enters the pop servers and ports. So the "Other" account setup choice seems to behave differently according to whether one has previously setup that account using one of the non "Other" service provider choices or not?????
    I don't know if anyone wants to experiment further and discover more or clarify the behaviours. I just did some quick playing around so did not analyse it much, however the above is the general gist of what I found. It is sometime since I set up email accounts on my E52 but from memory it behaved much the same way as the N8 does and is generally weak on handling pop accounts - in fact I would suggest that many who think they are using pop servers will find that behind the scenes it is really using imap ones.
    A real downer for me is for a pop account there seems to be no way to set up a reply to address in the sent emails that is different to the address sent from. This need for me being due to the way I manage emails across several machines.
    I'm off to have a beer

  • How to Set default value for taxonomywebtagging control with terms and nested terms

    Hi,
    I have created taxonomy control in custom aspx page and I am able to select terms but I am trying to setup default value to that control.
    Can anybody let me know how to set the default value for TaxonomyWebTagging control in custom.aspx page with nested terms?
    Any help would be greatly apprecited.
    Control code in aspx page:
    <td>
    <asp:Label runat="server" ID="lblLanguages">Field A: </asp:Label><asp:Label runat="server" ID="rfvlblLanguages" CssClass="errorMsg" ForeColor="Red">*</asp:Label>
    </td>
    <td>
    <Taxonomy:TaxonomyWebTaggingControl ID="term" Width="385px" runat="server" /></td>Mapping metedata code:TaxonomySession session = new TaxonomySession(SPContext.Current.Site);
    //Set the Business Unit Field
    SPSite site = SPContext.Current.Web.Site;
    TermStore termStore = session.TermStores["Managed Metadata Service"];
    Group group = termStore.Groups["GROUPName"];
    TermSet termSet = group.TermSets["TERMSETNAME"];
    Term term = termSet.Terms["TermA"];
    Guid termGuid = term.Id;
    term.SspId.Add(termStore.Id);
    term.TermSetId.Add(termSet.Id);
    term.AllowFillIn = true;
    term.AnchorId = countryGuid;
    term.IsMulti = true;
    Thank you.
    AA.

    Hi,
    According to your description, you want to set default value for TaxonomyWebTaggingControl.
    I have a test in my environment. It could be achieved by setting the Text Property of TaxonomyWebTaggingControl.
    Here is the code snippet:
    TaxonomySession session = new TaxonomySession(SPContext.Current.Site);
    SPSite site = SPContext.Current.Web.Site;
    TermStore termStore = session.TermStores["Managed Metadata Service"];
    Group group = termStore.Groups["GroupA"];
    TermSet termSet = group.TermSets["A"];
    Term term = termSet.Terms["A1"];
    TaxonomyWebTaggingControl1.SspId.Add(termStore.Id);
    TaxonomyWebTaggingControl1.SSPList = termStore.Id.ToString();
    TaxonomyWebTaggingControl1.TermSetId.Add(termSet.Id);
    TaxonomyWebTaggingControl1.TermSetList = termSet.Id.ToString();
    TaxonomyWebTaggingControl1.AllowFillIn = true;
    TaxonomyWebTaggingControl1.IsAddTerms = true;
    TaxonomyWebTaggingControl1.IsMulti = false;
    TaxonomyWebTaggingControl1.Text = string.Format("{0}|{1}", term.Name, term.Id.ToString());
    Here is a detailed article for your reference:
    http://blog.bugrapostaci.com/2010/09/23/taxonomywebtaggingcontrol-sharepoint/
    Feel free to Reply the test result.
    Thanks
    Patrick Liang
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Patrick Liang
    TechNet Community Support

  • How to set a class path in atuoexec.bat

    hello friends,
    How to set a classpath in autoexec.bat file. pls sent a path setting techniques to me.
    my JDK1.2 in "c dirve" so what can i do
    help me
    davipet

    What is your OS?
    If it is 95 or 98,
    add SET CLASSPATH=C:\Jdk1.2\lib\tools.jar;.; to your autoexec.bat file.

  • How to set View for Completed items inside Tasks?

    How to set button for 'View' and see Completed items or not completed inside Tasks?

    Hi,
    You want to set custom views for Tasks folder so that when we click a view button, it will show all Completed or incomplete tasks, am I correct?
    Which version of Outlook are you using? There are existing views for completed/incomplete tasks in Outlook. In Outlook 2010 and Outlook 2013, we can find the buttons under View tab > Change View. Click Completed button to view all completed
    tasks; Click Active button to view incomplete tasks.
    In Outlook 2007, just click View > Current View to switch between different views.
    If I've misunderstood something, please feel free to let me know.
    Regards,
    Steve Fan
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • How to set the AS2 fileName for outbound Functional Ack 997 auto generated by Oracle B2B

    Hi Friends,
    How to set the AS2 fileName for outbound Functional Ack 997 auto generated by Oracle B2B.
    External Trading Partner is sending the EDI 856 via AS2 URL to our Oracle B2B Server.
    In the inbound 856 agreement, we have checked the option of Funtional Ack and also Functiona Ack handled by B2B is yes.
    We have the outbound agreement which is sending that Functional ack 997 (auto generated by oracle b2b) and we have specified the Outbound AS2 channel of the Partner.
    997 doc is being sent to external partner using AS2 channel, but the filename is generating as '40101'.
    Please can you let me know how to set the AS2 fileName for outbound Functional Ack 997 auto generated by Oracle B2B.
    Appreciate your valuable answers!!
    Thanks,
    Amirineni

    Amirineni,
    AFAIK, there is no option to set the file name when the 997 is generated automatically by B2B.
    Alternatively, if this is a must requirement, you can generate the FA from backend and  send to B2B with MSG_TYPE =9. In this case, you can set the header with filename (How to set the actionname property in B2B 11g)

Maybe you are looking for