How to set row height for each row

Hi
i am trying to set rowheight of row in a JTable using setRowHeight(row,rowheight)
it is not affecting on Table.but if i use setRowheight(rowheight) it applying
entire table ,please help me to solve this problem
after setRowHeight(row,rowheight), i am calling firechanged() method also ,i t will not affecting please hemp me
how to set row height at runtime in a JTable

Ok fine... do one thing... post ur code here let me check and tell u....
Ciya.....

Similar Messages

How to process a block for each row in an internal table....

Hi experts....
In po approval workflow the scenario is like this.... for each po there may be more than one approver. approvers list i am maintaining in the ztable. list of approvers(no of approvers) is decided by the po value. I have collected these approvers into internal table. now i have to process a block ( approving or rejecting the po... )in the workflow for each row in the internal table.
how can i do this. based on the decision of the 1st approver approves the po then it should go to next approver in the internal table...otherwise end the workflow.....
Please help me......

i have created an internal table in the workflow container in which i am getting the list of approvers....
how can i loop the internal table in the workflow...?
how can i know the index of the loop in the workflow.....(will sy-index work here....? so that i can use loop until step in the main workflow to call the subworkflow..so that if sy-index is greater than no of entires in the itab then i can come out of the loop)

How to add a comment for each row on the output of a report?

I would like to add a comment (field) for each row on the output of report? This comment should to be saved as well. Is there a way i can do that?
Regards,
Ram

Hi Dimitri,
through the instead of trigger functionality i am able to update the view. This is view is based on different views which should be linked to a table (as you suggested) in which comments can be stored. Hower this table is empty and how to link this table with the view now? I face the following challenge.
View consists the following columns, for example
select name, sex, age from test_view
name sex age
John M 20
Anton M 30
Willy M 40
shirley F 38
sharon F 37
The report has the following output, for example
name sex age
John M 20
Anton M 30
Willy M 40
Shirley F 38
Sharon F 37
Now i would like to add comment through a button.
The report layout looks like
name sex age
John M 20 <add comment button>
After submitting the <add comment button> you can enter text which deals with John
text='John doesnot like me'
Finally the report display the comment as well
name sex age
John M 20 'John doesnot like me' <update/delete comment button>
Anton M 30 <add comment button>
Willy M 40 <add comment button>
Shirley F 38 <add comment button>
Sharon F 37 <add comment button>
After submitting the <update/delete button> you can change or delete the entered text.
I hope this example clears things up.
Regards,
Ram

How to set command action for each item in the popupmenuimage

Hi all,
In my canvas application,i used images for popupmenu.Now i have to set command action for each item in that popupmenuimage.I dont know whether it is possible in canvas or not.Can anyone tell me the solution for this .
Thanks,
sourab

Buttons is typical of a c/s application, or, in case of Web Forms, a Java applet. Instead of buttons, you have to use hyperlinks.
See:
http://otn.oracle.com/products/reports/htdocs/faq/faq_migration.htm#346
The hyperlink wil have to be to a URL that does the insert in the table. This can be a mod_plsql procedure, for instance.

How to set Logo Image for each Project Site Seperately in project server 2010.

Hi,
I want different logo images to be set for each Project Site of different project Separately in Project server 2010.
Scenario is, we have different Project of different client , each client want different logo for their respective Projects.
How to accomplish this task?
Please Help me.
Thanks

Hello. Store the logo somewhere accessible, either in a library at the PWA site collection or on the project site, make a note of the URL to the site then navigate to the project site and depending on what logo you want to update you can click Site Actions
> Site Settings > title and description then update the image URL there. Alternatively, on the homepage of the project site add an image web part then reference the new logo using the URL. Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS

GarageBand - How to set different BPM for each track?

Hi, for the last couple of years, I've been using Sony Acid on my PC to mix multiple tracks to make blends and remixes of songs. I've just switched of the a MacBook, and am trying to get Garage Band to do the same. I'm curious whether or not I can set the BPM of each track individually so they will all play at the same BPM when mixed. I'm only able to find the master BPM that changes the entire BPM. Any help would be great. Thanks in advance.

Well, as far as I can see you don't really want different BPMs on each track, but you want all tracks to have the same tempo - only you want to make the tracks fit that tempo.
You could do that in GB by first bringing each of the tracks to the desired tempo, then export it and re-import it. (There's some other ways to do it, but they all involve some fiddling around and maybe some math.*)
Logic offers a nice feature where you can shorten and lengthen a region just by dragging it out. That could be used for the purpose you're trying to achieve.
*For example: Determine the BPM of each of the tracks. Set the project's tempo to the BPM of track A. Import track A, turn it purple so it follows the tempo. Then set the project to project B's tempo, import it, etc. You will end up with all tracks in the same tempo, and you can still make the whole project go faster or slower.

How to create a growing table with hierarchical increasing of rows Eg. For each row there must be a subRow i can add like for 1 i can add 1.1

i can increase the row but how to make it hirarchical so tha i can add rows under rows?

You have the right link to get started on adding authentication to your Mobile service app. But for security reasons the MobileServiceUser class only exposes the authenticated UserId and MobileServiceAuthenticationToken properties. You can save these
two values in your client application.
Getting the user name and email address isn't available through this medium. You would have to call into the respective APIs for the service (Facebook or Twitter APIs).
Abdulwahab Suleiman

How to set property nodes for each of the multiple y-axes?

In Labview 6i, I have set up multiple y-axes on an xy graph. I want to change certain properties of each of the 2 y-axes independently. I believe I can do this using "property node".
However, after I have created a property node for the xy graph, I realised that there is only 1 y-axis selectable from the list of properties. How can I set the property of the other y-axis then?
Thanks for the help!

I believe there is a property called "active graph"... this allows you to
select the active graph to apply the property changes to...
Later...
meng118230 wrote in message
news:[email protected]..
> In Labview 6i, I have set up multiple y-axes on an xy graph. I want to
> change certain properties of each of the 2 y-axes independently. I
> believe I can do this using "property node".
>
> However, after I have created a property node for the xy graph, I
> realised that there is only 1 y-axis selectable from the list of
> properties. How can I set the property of the other y-axis then?
>
> Thanks for the help!

Creating Named lov for each row..........

How to create Named LOV for each row in a field.
i have a tabular in a page. In that tabular i have three fields service_code,*service_name* and No_units.
i have to create lov for service_code for all rows.
how to do this?
plz help...

Hi Frank,
This is the method i wrote in the managed Bean. It works when I hard code the department value to some value(like 10).
public List<SelectItem> getEmployeeList() {
int Deptid = 10;
ArrayList<SelectItem> employees = new ArrayList<SelectItem>();
employees.add(new SelectItem("0", "--Select Employee---"));
try {
Connection con = getConnection();
PreparedStatement ps =
con.prepareStatement("select name from employees where department_id = ?");
ps.setInt(1, Deptid);
ResultSet rs = ps.executeQuery();
while (rs.next()) {
employees.add(new SelectItem(rs.getString("name")));
rs.close();
ps.close();
con.close();
} catch (Exception ex) {
System.out.println(ex.getMessage());
return employees;
How can I pass the row Department Id to this method in the f:selectItems?
I really appreciate your help in resolving this issue.
Thanks

Make select for each row - another solution?

For example I have a function with day before selection:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
function ABS return boolean is
ret number(10,2);
begin
for sab in (select saldod from ndv_ccli, nd_clientes where
(:p_dtvenc-dtdoc) = (select min(:p_dtvenc-dtdoc) from ndv_ccli, nd_clientes
where (:p_dtvenc-dtdoc>0)and
ndv_ccli.cod_cli = cod_cli) and
ndv_ccli.cod_cli = cod_cli order by dtdoc desc,cddb )
loop
ret := sab.saldod;
end loop;
return (ret);
end;
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
In report I use the value of this function(a) in another function(b) to sum with few values.
Output of function(b) has a lot of rows and for each row it makes select in function(a) to find the value, but actualy it is the same. Is it possible to do this select only one time and then put in function(b) only it's value? Because it makes report too slow...
tnx before

Thanx, but while compiling it says:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
REP-0749: After form trigger cannot reference a report column.
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

Raise expection for each row if returned set contains x

Hello Guys,
I have the following code and almost gave up on the idea to raise an exception and print
a line for each row where the sales price is < 10. I know how this works with a CURSOR but I want to try it without it. Thinking about it let me to the conclusion that this is not possible to act on individual row results on a set based operation. I will have to use a CURSOR (not set based so I can look at each row).
Am I thinking correctly?
(Code example deleted due to confusion)
Code example deleted due to confusion
Edited by: metalray on 10.11.2010 01:07

Hi 3360,
I am using PL/SQL. I can make my point without any code.
The question, in a different format is this:
Can I throw an whatever exception (or dbms_output put line) for individual rows WITHOUT using a cursor.
My answer (and I just need clarification on this):
*(1)* No, because anything apart from a cursor is set-based and set-based operations (select, join, union)
can not through exceptions on individual rows.
*(2)* Yes, you can have a DBMS_OUTPUT.PUT_LINE with whatever exception on a set based operation
for each individual row that causes the exception (I dont think this answer is true :)
@Agustin UN, thanks for that. I know that is possible :) The problem is,
that I dont think I can print or fetch each individual row that causes the "exception" since
it is treated as a set. - I am welcome for someone to tell me that it work nevertheless

How do I save rows results and add them up for each row.

I have the following select statement that saves the results in result1, result 2 and result3 variables.. How do I include a total (result1 + result2 + result3) for each row?
select TRUNC(AVG( SUM ( (DECODE (cc.request_wflow_status, 'Estimator Notified'
,cc.end_date,NULL) - DECODE (cc.request_wflow_status,
'Estimator Notified',cc.start_date,NULL)))),1) result1
,TRUNC(AVG( SUM ( (DECODE (cc.request_wflow_status, 'Estimator Accepted'
,cc.end_date,NULL) -
DECODE (cc.request_wflow_status,'Estimator Accepted',cc.start_date,NULL)))),1) result2
,TRUNC(AVG( SUM ( (DECODE (cc.request_wflow_status,
'Install Complete',cc.end_date,NULL) -
DECODE (cc.request_wflow_status,'Install Complete',cc.start_date,NULL)))),1) result3
FROM cc_request_status cc
GROUP BY cc.request_id
Thanks,

select result1,result2,result3,nvl(result1,0) + nvl(result2,0) + nvl(result3,0) Total from ( ...your query...);

How to display recordnumber for each row in cross tab?

Hi.. I am using Crystal Report XI,with the database Microsoft SQL Server. I have 2 questions regarding Cross Tab.1. How to limiting record per row and per column in Cross Tab? For example,at one page the report printing 20 records per row and 7 records per columns.2. I would like to display recordnumber for each row that printing in Cross tab. How crystal reports can handle this?Can anyone can help me out on this? Please kindly advise.AN 

Dear Kathryn, I did used DisplayString as suggested by you. The result work fine until I add more data to this cross tab. I used this formula : global numbervar pager;recordnumber();pager := pager + 1; if pager > 0 then totext(pager - 1,0) The result come out in decending order for each row. SN Name 5 abc 4 def3 fig 2 klm 1 opq Is that anything wrong with my formula? Please kindly advise.-AN-

For each row of a table call a pl/sql function

Hi,
i have a search form in adf like this:
parameter1:___
parameter2:____
buttonSearch
Table with results
field1 field2 field3
row1 ------ --------- -------
row2 ------ --------- -------
row3 ------ --------- -------
The user inputs the parameters 1 and 2 then press buttonSearch and the query execute and returns rows 1 to 3.
What i need is for each row call pl/sql function and passed the parameter 1 and 2 and field 1 to 3 (plsql function recives 5 parameters (parameter1, parameter2, field1 , field2 and field3) )
my buttonSearch call a java class that execute ExecuteWithParamters method.
I create the call to my plsql function on Application module class and then export as a java interface.
So i have the function to use in the viewcontroller layer, but i don't know where to use it, and how to pass the paramters: the parameter 1 and 2 that user inputs and the row fields.....
any ideas....
thanks!!

Hi,
for this you need to call the PLSQL function upon table rendering, which means that you need a field in the table referencing a managed bean. In the managed bean you can use #{row} and resolve it using a ValueExpression. #{row} gives you access to the current rendered row (this is why you need to do it when the table renders) and thus allows you to call getAttribute(name) to get the values of field 1 - 3. The search field value you should get through the bindings reference (assuming the search form uses ADF). Then you create an operation binding for the executeWithParameters and call operationBindingName.getParamsMap().put(argname, argvalue); on it.
Frank
Ps.: I am concerned about the performance you get and wonder if it isn't possible to create a transient attribute that executes the function and displays the results. As I understand, the search parameters are only to filter the result set, which you still can do

SQL merge and after insert or update on ... for each row fires too often?

Hello,
there is a base table, which has a companion history table
- lets say USER_DATA & USER_DATA_HIST.
For each update on USER_DATA there has to be recorded the old condition of the USER_DATA record into the USER_DATA_HIST (insert new record)
- to have the history of changes to USER_DATA.
The first approach was to do the insert for the row trigger:
trigger user_data_tr_aiu after insert or update on user_data for each rowBut the performance was bad, because for a bulk update to USER_DATA, there have been individual inserts per records.
So i tried a trick:
Instead of doing the real insert into USER_DATA_HIST, i collect the USER_DATA_HIST data into a pl/sql collection first.
And later i do a bulk insert for the collection in the USER_DATA_HIST table with stmt trigger:
trigger user_data_tr_ra after insert or update on user_dataBut sometimes i recognize, that the list of entries saved in the pl/sql collection are more than my USER_DATA records being updated.
(BTW, for the update i use SQL merge, because it's driven by another table.)
As there is a uniq tracking_id in USER_DATA record, i could identify, that there are duplicates.
If i sort for the tracking_id and remove duplicate i get exactly the #no of records updated by the SQL merge.
So how comes, that there are duplicates?
I can try to make a sample 'sqlplus' program, but it will take some time.
But maybe somebody knows already about some issues here(?!)
- many thanks!
best regards,
Frank

Hello
Not sure really. Although it shouldn't take long to do a test case - it only took me 10 mins....
SQL>
SQL> create table USER_DATA
2 ( id number,
3 col1 varchar2(100)
4 )
5 /
Table created.
SQL>
SQL> CREATE TABLE USER_DATA_HIST
2 ( id number,
3 col1 varchar2(100),
4 tmsp timestamp
5 )
6 /
Table created.
SQL>
SQL> CREATE OR REPLACE PACKAGE pkg_audit_user_data
2 IS
3
4 PROCEDURE p_Init;
5
6 PROCEDURE p_Log
7 ( air_UserData IN user_data%ROWTYPE
8 );
9
10 PROCEDURE p_Write;
11 END;
12 /
Package created.
SQL> CREATE OR REPLACE PACKAGE BODY pkg_audit_user_data
2 IS
3
4 TYPE tt_UserData IS TABLE OF user_data_hist%ROWTYPE INDEX BY BINARY_INTEGER;
5
6 pt_UserData tt_UserData;
7
8 PROCEDURE p_Init
9 IS
10
11 BEGIN
12
13
14 IF pt_UserData.COUNT > 0 THEN
15
16 pt_UserData.DELETE;
17
18 END IF;
19
20 END;
21
22 PROCEDURE p_Log
23 ( air_UserData IN user_data%ROWTYPE
24 )
25 IS
26 ln_Idx BINARY_INTEGER;
27
28 BEGIN
29
30 ln_Idx := pt_UserData.COUNT + 1;
31
32 pt_UserData(ln_Idx).id := air_UserData.id;
33 pt_UserData(ln_Idx).col1 := air_UserData.col1;
34 pt_UserData(ln_Idx).tmsp := SYSTIMESTAMP;
35
36 END;
37
38 PROCEDURE p_Write
39 IS
40
41 BEGIN
42
43 FORALL li_Idx IN INDICES OF pt_UserData
44 INSERT
45 INTO
46 user_data_hist
47 VALUES
48 pt_UserData(li_Idx);
49
50 END;
51 END;
52 /
Package body created.
SQL>
SQL> CREATE OR REPLACE TRIGGER preu_s_user_data BEFORE UPDATE ON user_data
2 DECLARE
3
4 BEGIN
5
6 pkg_audit_user_data.p_Init;
7
8 END;
9 /
Trigger created.
SQL> CREATE OR REPLACE TRIGGER preu_r_user_data BEFORE UPDATE ON user_data
2 FOR EACH ROW
3 DECLARE
4
5 lc_Row user_data%ROWTYPE;
6
7 BEGIN
8
9 lc_Row.id := :NEW.id;
10 lc_Row.col1 := :NEW.col1;
11
12 pkg_audit_user_data.p_Log
13 ( lc_Row
14 );
15
16 END;
17 /
Trigger created.
SQL> CREATE OR REPLACE TRIGGER postu_s_user_data AFTER UPDATE ON user_data
2 DECLARE
3
4 BEGIN
5
6 pkg_audit_user_data.p_Write;
7
8 END;
9 /
Trigger created.
SQL>
SQL>
SQL> insert
2 into
3 user_data
4 select
5 rownum,
6 dbms_random.string('u',20)
7 from
8 dual
9 connect by
10 level <=10
11 /
10 rows created.
SQL> select * from user_data
2 /
 ID COL1
 1 GVZHKXSSJZHUSLLIDQTO
 2 QVNXLTGJXFUDUHGYKANI
 3 GTVHDCJAXLJFVTFSPFQI
 4 CNVEGOTDLZQJJPVUXWYJ
 5 FPOTZAWKMWHNOJMMIOKP
 6 BZKHAFATQDBUVFBCOSPT
 7 LAQAIDVREFJZWIQFUPMP
 8 DXFICIPCBCFTPAPKDGZF
 9 KKSMMRAQUORRPUBNJFCK
 10 GBLTFZJAOPKFZFCQPGYW
10 rows selected.
SQL> select * from user_data_hist
2 /
no rows selected
SQL>
SQL> MERGE
2 INTO
3 user_data a
4 USING
5 ( SELECT
6 rownum + 8 id,
7 dbms_random.string('u',20) col1
8 FROM
9 dual
10 CONNECT BY
11 level <= 10
12 ) b
13 ON (a.id = b.id)
14 WHEN MATCHED THEN
15 UPDATE SET a.col1 = b.col1
16 WHEN NOT MATCHED THEN
17 INSERT(a.id,a.col1)
18 VALUES (b.id,b.col1)
19 /
10 rows merged.
SQL> select * from user_data_hist
2 /
 ID COL1 TMSP
 9 XGURXHHZGSUKILYQKBNB 05-AUG-11 10.04.15.577989
 10 HLVUTUIFBAKGMXBDJTSL 05-AUG-11 10.04.15.578090
SQL> select * from v$version
2 /
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for Linux: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - ProductionHTH
David

How to set row height for each row

Similar Messages

Maybe you are looking for