How to create a growing table with hierarchical increasing of rows Eg. For each row there must be a subRow i can add like for 1 i can add 1.1

i can increase the row but how to make it hirarchical so tha i can add rows under rows?

You have the right link to get started on adding authentication to your Mobile service app. But for security reasons the MobileServiceUser class only exposes the authenticated UserId and MobileServiceAuthenticationToken properties. You can save these
two values in your client application.
Getting the user name and email address isn't available through this medium. You would have to call into the respective APIs for the service (Facebook or Twitter APIs).
Abdulwahab Suleiman

Similar Messages

How to create database and table with GUI?

How to create database and table with GUI?
for linux can do that?
or have only way to create table by use sql*plus.
everyone please help me.
thanks

go to www.orasoft.org
here is a gui tool.
null

How to Create a Temporary Table with SQL Server

I know you can create a temporary table in SQL Server 2000, but not quite sure how to do it in CFMX 7, i.e., does the SQL go inside a <CFQUERY dbtype="query"> tag?
I'm pulling the main set of records from an Oracle server (1st data source), but it does not contain employee names, only employee IDs. Since I need to show the employee name along with the Emp ID, I'm then pulling a list of "current" employee names from a SQL Server (2nd data source), which is the main database on our CF server.
I've got a QofQ that works fine, except it only matches EmpIDs that exist in both result sets. Employees who are no longer employed, don't match, and don't display. Since I can't do a LEFT OUTER JOIN with a QofQ, what I need to do is get the records from the Oracle server into the SQL Server. Preferably in a temporary table.
I was hoping if I could get those Oracle records written to a temp table on the main SQL Server, in same database as the Employee Name table, I could then write a normal <CFQUERY> that uses a LEFT OUTER JOIN.
I think I could probably write a Stored Procedure that would execute the SQL to create the temporary table, but am trying to avoid having to write the SP, and do it the simplest way.
This query will be a program that can be run hundreds of times per day, with a form that allows users to select date ranges, locations, and other options. That starts the queries, which creates the report. So I just need the temp table to exist only until all the SQL has run, and the <CFOUTPUT> has generated a report.
If the premise is right, I just need some help with the syntax for creating a SQL Server temp table, when you want to write records to it from an external data source. I'm trying the following, but getting an error:
<CFQUERY name="ITE_Temp" datasource="SkynetSQL">
CREATE TABLE #MyTemp
( INSERT INTO #MyTemp
ITE2.TrueFile char (7) NOT NULL,
ITE2.CountOfEmployee int NULL,
ITE2.DTL_SUBTOT decimal NULL,
ITE2.EMPTYPE char (3) NULL,
ITE2.ARPT_CD char (3) NULL
</CFQUERY>
So I actually created a permanent table on the SQL Server, and wrote the below SQL, which does work, and does write the records to table. I can then write another CFQUERY with a LEFT OUTER JOIN, and get all the records, including those that don't have matching employee name:
<CFQUERY datasource="SkynetSQL">
<CFLOOP index="i" from="1" to = "#ITE2.RecordCount#">
INSERT INTO ITE_Temp
 (FullFile,
 EmployeeCount,
 DTL_Amount,
 EmployeeType,
 station)
VALUES ('#ITE2.TrueFile[i]#',
 #ITE2.CountOfEmployee[i]#,
 #ITE2.DTL_SUBTOT[i]#,
 '#ITE2.EMPTYPE[i]#',
 '#ITE2.ARPT_CD[i]#')
</CFLOOP>
</CFQUERY>
But, I hate to have to create a table and physically write to it. For one, it seems slower, and doing it in temp would be in memory, and probably much faster, correct? Is there some way to code the above, so that it does something similar, but in a TEMPORARY TABLE? If I can figure out how to do this, I can pull data from multiple data sources and servers, and using SQL Server temp tables, work with the data as if it was all on the same SQL Server, and do some cool reports.
Everything I've done for the past few years, has all been from data from a single source, whether SQL Server, or another server. Now I need to start writing reports where data can come from 3 or 4 different servers, and be able to do joins (inner and outer). Thanks for any advice/help. Much appreciated.
Gary

While waiting to hear back, I was able to write the query results from an outside Oracle server, to a table on the local SQL Server, and do the LEFT OUTER JOIN required for the final query and report to work. That was with this syntax:
<CFQUERY name="AddTableRecords" datasource="MyTable">
TRUNCATE TABLE ITE_Temp
<CFOUTPUT query="ITE2">
INSERT INTO ITE_Temp
(FullFile,EmployeeCount,DTL_Amount,EmployeeType,station)
VALUES
('#TrueFile#', #CountOfEmployee#, #DTL_SUBTOT#, '#EMPTYPE#', '#ARPT_CD#')
</CFOUTPUT>
</CFQUERY>
However, I was not able to write to a temporary table AND read the results. I got the syntax to run to write the above results to a temporary table. But when I tried to read and output the results from the temp table, I got an error. Also, it wouldn't take the single "#" (local) only the global "##" table var, using this syntax. Note that if I didn't have the DROP TABLE in the beginning, the 2nd time you run this query, you get an error telling you the table already exists.
<CFQUERY name="ITE_Temp2" datasource="MyTable">
DROP TABLE ##MyTemp2
CREATE TABLE ##MyTemp2
FullFile char (7) NOT NULL,
EmployeeCount int NULL,
DTL_Amount decimal NULL,
EmployeeType char (3) NULL,
station char (3) NULL
<CFOUTPUT query="ITE2">
INSERT INTO ##MyTemp2 VALUES
'#ITE2.TrueFile#',
#ITE2.CountOfEmployee#,
#ITE2.DTL_SUBTOT#,
'#ITE2.EMPTYPE#',
'#ITE2.ARPT_CD#'
</CFOUTPUT>
</CFQUERY>
So even though the above works, I could use some help in reading/writing the output. I've tried several things similar to below, but they don't work. It't telling me ITE_Temp2 does not exist. It's not easy to find good examples of creating temporary tables in SQL Server.
<CFQUERY name="QueryTest2" datasource="SkynetSQL">
SELECT *
FROM ITE_Temp2
</CFQUERY>
<CFOUTPUT query="ITE_Temp2">
Output from Temp Table 
FullFile: #FullFile#, EmployeeCount: #EmployeeCount#
</CFOUTPUT>
Thanks for any help/advice.
Gary.

How to create Dynamic internal table with columns also created dynamically.

Hi All,
Any info on how to create a dynamic internal table along with columns(fields) also to be created dynamically.
My requirement is ..On the selection screen I enter the number of fields to be in the internal table which gets created dynamically.
I had gone thru some posts on dynamic table creation,but could'nt find any on the dynamic field creation.
Any suggestions pls?
Thanks
Nara

I don't understand ...
something like that ?
*   Form P_MODIFY_HEADER.                                              *
form p_modify_header.
data : is_fieldcatalog type lvc_s_fcat ,
         v_count(2)      type n ,
         v_date          type d ,
         v_buff(30).
* Update the fieldcatalog.
loop at it_fieldcatalog into is_fieldcatalog.
    check is_fieldcatalog-fieldname+0(3) eq 'ABS' or
          is_fieldcatalog-fieldname+0(3) eq 'VAL' .
    move : is_fieldcatalog-fieldname+3(2) to v_count ,
           p_perb2+5(2)                   to v_date+4(2) ,
           p_perb2+0(4)                   to v_date+0(4) ,
           '01'                           to v_date+6(2) .
    v_count = v_count - 1.
    call function 'RE_ADD_MONTH_TO_DATE'
        exporting
          months        = v_count
          olddate       = v_date
        importing
          newdate       = v_date.
    if is_fieldcatalog-fieldname+0(3) eq 'ABS'.
      concatenate 'Quantité 0'
                  v_date+4(2)
                  v_date+0(4)
                  into v_buff.
    else.
      concatenate 'Montant 0'
                  v_date+4(2)
                  v_date+0(4)
                  into v_buff.
    endif.
    move : v_buff to is_fieldcatalog-scrtext_s ,
           v_buff to is_fieldcatalog-scrtext_m ,
           v_buff to is_fieldcatalog-scrtext_l ,
           v_buff to is_fieldcatalog-reptext .
    modify it_fieldcatalog from is_fieldcatalog.
endloop.
* Modify the fieldcatalog.
call method obj_grid->set_frontend_fieldcatalog
       exporting it_fieldcatalog = it_fieldcatalog.
* Refresh the display of the grid.
call method obj_grid->refresh_table_display.
endform.                     " P_MODIFY_HEADER

How to create an internal table with fields from different sources

Hi.
I need to create an internal table where some of the fields are from a database table, and the other fields are user specified. How do i do that?
Example:
DB table ZTAB with fields ZTAB-FIELD1, ZTAB-FIELD2.
I want to create an internal table ITAB with the fields ZTAB-FIELD1, ZTAB-FIELD2 from ZTAB. In addition, I also want to have one more field RECORD_NO, which is not from ZTAB. How do I do it? Could I do something like below?
DATA BEGIN OF ITAB.
        INCLUDE STRUCTURE ZTAB.
DATA RECORD_NO TYPE I.
DATA END OF UPLINE.
Or, are there more efficient way of doing it? Thanks.

hi KIan,
go:
general type
TYPE : BEGIN OF ty_itab,
           field1 TYPE ztab-field1,
           field2 TYPE ztab-field2,
*your own fields here:
           field TYPE i,
           field(30) TYPE c,
           END OF ty_itab.
work area
DATA : gw_itab TYPE ty_itab.
internal table
DATA : gt_itab TYPE TABLE OF ty_itab.
hope this helps
ec

How to create an internal table with a types structure?

Hi experts,
I've 3 internal tables with the same structure, I think I could put a type structure and put that type inside the body of the internal data, is this possible? If true, how can I put that?
Example:
TYPES: Begin of type_s,
               pernr like pa0001-pernr,
             end of type_s.
Data: begin of itab_1 occurs 0,
¿¿¿??? reference to type_s
         end of itab_1.
Thanks a lot,
Regards,
Rebeca

Hi,
Use like this..
DATA: Begin of type_s,
pernr like pa0001-pernr,
end of type_s.
DATA: BEGIN OF ITAB_1 OCCURS 0.
INCLUDE STRUCTURE type_s.
DATA: END OF ITAB_1.
Otherwise like this.
types: Begin of type_s,
pernr like pa0001-pernr,
end of type_s.
Data: itab_1 type standard table of type_s.
Note: You have to create work area explicitly.
Like this
data wa like itab1.
Edited by: Velangini Showry Maria Kumar Bandanadham on May 26, 2009 1:04 PM

How to create a cutoms table with a heading

Dear Freinds,
I have a requirement where i have to create the Custom as below .........my functional is
saying that he want table as below
outpatient
employeeno
class
startdate
enddate
spouse
1stchild
2nchild
How can we create like this table having outpatient as heading
and a fields as
employeeno , class,startdate,enddate,spouse,1stchild,2ndchild
how can we create in a custom table..... i have never seenlike the above requiremnt.
Please suggest me how to create. I can send the Excel sheet where they have given the above requiremnt...... plelase any body can suggest me so that i can your personnel id's . Pleast a bit urgent.
regards
syamala

While waiting to hear back, I was able to write the query results from an outside Oracle server, to a table on the local SQL Server, and do the LEFT OUTER JOIN required for the final query and report to work. That was with this syntax:
<CFQUERY name="AddTableRecords" datasource="MyTable">
TRUNCATE TABLE ITE_Temp
<CFOUTPUT query="ITE2">
INSERT INTO ITE_Temp
(FullFile,EmployeeCount,DTL_Amount,EmployeeType,station)
VALUES
('#TrueFile#', #CountOfEmployee#, #DTL_SUBTOT#, '#EMPTYPE#', '#ARPT_CD#')
</CFOUTPUT>
</CFQUERY>
However, I was not able to write to a temporary table AND read the results. I got the syntax to run to write the above results to a temporary table. But when I tried to read and output the results from the temp table, I got an error. Also, it wouldn't take the single "#" (local) only the global "##" table var, using this syntax. Note that if I didn't have the DROP TABLE in the beginning, the 2nd time you run this query, you get an error telling you the table already exists.
<CFQUERY name="ITE_Temp2" datasource="MyTable">
DROP TABLE ##MyTemp2
CREATE TABLE ##MyTemp2
FullFile char (7) NOT NULL,
EmployeeCount int NULL,
DTL_Amount decimal NULL,
EmployeeType char (3) NULL,
station char (3) NULL
<CFOUTPUT query="ITE2">
INSERT INTO ##MyTemp2 VALUES
'#ITE2.TrueFile#',
#ITE2.CountOfEmployee#,
#ITE2.DTL_SUBTOT#,
'#ITE2.EMPTYPE#',
'#ITE2.ARPT_CD#'
</CFOUTPUT>
</CFQUERY>
So even though the above works, I could use some help in reading/writing the output. I've tried several things similar to below, but they don't work. It't telling me ITE_Temp2 does not exist. It's not easy to find good examples of creating temporary tables in SQL Server.
<CFQUERY name="QueryTest2" datasource="SkynetSQL">
SELECT *
FROM ITE_Temp2
</CFQUERY>
<CFOUTPUT query="ITE_Temp2">
Output from Temp Table 
FullFile: #FullFile#, EmployeeCount: #EmployeeCount#
</CFOUTPUT>
Thanks for any help/advice.
Gary.

How to create dynamic data tables with ADF 10g

Hi,
Can anyone provide sample code for creating dynamic data table in adf where column & row will be added dynamically according to the data coming from the Array List of data.
I appreciate your help here.

I think you've posted to the wrong forum. This one is for WebLogic Portal questions.
Try the ADF/DVT forum:
http://myforums.oracle.com/jive3/forum.jspa?forumID=1565

How to create an internal table with header line in smartforms

Hello Guys,
I need to append the data in my internal table in smartforms by the problem is an error occurred "a table without header line and therefore no component called tdline"
i already declared the data under types declaration tab
types : begin of ts_tline,
         TDFORMAT type tdformat,
         tdline type tdline,
        end of ts_tline.
types : it_tline type table of ts_tline.
and declare these in global data
WA_TLINE type TS_TLINE
XT_TLINE type IT_TLINE
my syntax in program lines :
LOOP AT gy_lines INTO WA_PROJ.
    SPLIT wa_proj AT cl_abap_char_utilities=>cr_lf
       INTO table IT_SPLIT.
    LOOP AT IT_SPLIT.
      MOVE it_split-commentext TO xt_TLINE-tdline.
an error occured at this part ****
     append xt_TLINE.
    ENDLOOP.
ENDLOOP.
what is wrong with my code..it cannot append data to xt_tline.
Please help.Will reward points
Thanks in advance
aVaDuDz

check this link
this will help u......
http://www.****************/Tutorials/Smartforms/SFMain.htm
reward IF..........
regards
Anbu

How to create a physical table with a session variable.

Hello,
I have been trying to accomplish accessing data multiple databases from a single rpd and single connection pool. Is there a way to do it using session variables and OBIEE stored procedures or something. If someone has anything I could read up(unless I have already googled it), it would really help me out.
Thanks.

Where is there a need to access multiple DBs using the same connection pool?
Just curious.

How to create an explain plan with rowsource statistics for a complex query that include multiple table joins ?

1. How to create an explain plan with rowsource statistics for a complex query that include multiple table joins ?
When multiple tables are involved , and the actual number of rows returned is more than what the explain plan tells. How can I find out what change is needed in the stat plan ?
2. Does rowsource statistics gives some kind of understanding of Extended stats ?

You can get Row Source Statistics only *after* the SQL has been executed. An Explain Plan midway cannot give you row source statistics.
To get row source statistics either set STATISTICS_LEVEL='ALL' in the session that executes theSQL OR use the Hint "gather_plan_statistics" in the SQL being executed.
Then use dbms_xplan.display_cursor
Hemant K Chitale

Hi guys n girls. How do you copy a whole table to create a new table with all cell sizes in tact? Thanks for your help. Jason.

Hi guys n girls. How do you copy a whole table to create a new table with all cell sizes in tact? Thanks for your help. Jason.
when you copy n paste into a new table, all the cell sizes are changed.
is there a way to put in a new table from your templates into an existing file, different to the standard very basic ones in insert table.
I look forward to your answers. Your help is very much appreciated.
Also how do you search for question answers already written in this support area please.

Hi Jason,
In Numbers 3, you can select a whole table by clicking once in the table to make it active, then click once on the "bull's eye" at the top left.
Now copy and paste. All formatting (and any cell content) is pasted intact. In Numbers 2.3 (Numbers '09) it is a little different for selecting a whole table. But I won't go into that unless you are using Numbers '09. Please reply.
I don't like the look of the tables in Insert Table. I keep custom tables in My Templates. I have set Numbers > Preferences > General > For New Documents > Use template: (name of my favourite custom template)
That opens when I launch Numbers, or ask for a new document (command n). Note that if you follow this preference setting, then Menu > File > New From Template Chooser (for another template) requires you to hold down the option key in that menu.
Regards,
Ian.
Message was edited by: Yellowbox. All formatting (and any cell content) is pasted intact.

[b]How to create this Custom Table on Custom Schema with foreign key [/b]

This Custom Table is create in Custom Schema and Refers to Seeded Table in APPS schema
1 create table test_dff (test_id number(15) primary key,
2* invoice_id number(15) constraint ap_test_fk REFERENCES ap_invoices_all(invoice_id) ON DELETE CASCADE)
SQL> /
invoice_id number(15) constraint ap_test_fk REFERENCES ap_invoices_all(invoice_id) ON DELETE CASCADE
ERROR at line 2:
ORA-02270: no matching unique or primary key for this column-list
How to create this Custom Table on Custom Schema
thanks in advance

hi prashant
sorry for replying late, i have checked your query and it gives me no rows, but if i check for user_cons_columns it gives me no rows either in APPS Schema, but in AP schema it gives me
SQL> SELECT * FROM user_cons_columns WHERE table_name = 'AP_INVOICES_ALL';
OWNER CONSTRAINT_NAME TABLE_NAME
COLUMN_NAME
POSITION
AP SYS_C008177 AP_INVOICES_ALL
INVOICE_ID
SQL> SELECT constraint_name, constraint_type FROM user_constraints WHERE table_name = 'AP_INVOICES_A
LL';
CONSTRAINT_NAME C
SYS_C008177 C
SYS_C008178 C
SYS_C008179 C
SYS_C008180 C
SYS_C008181 C
SYS_C008182 C
SYS_C008183 C
SYS_C008184 C
SYS_C008185 C
SYS_C008187 C
SYS_C008189 C
SYS_C008191 C
and since this is a combination of Unique and Not Null Constraints , i am getting the same issue. do u have any solution to make the Detail table records to delete without using Alerts/DB Triggers?
thanks for your time .
abdul rahman

How to create the custom table?

Hi, how to create the custom table and how to integrate the table with defferent R/3?
my requiremnt is i have to create the two tables and those i have to integrate with the existed R/3 and using those R/3 i have to update my custom tables .....can give me some idea?
Tks
DPk

how to create the custom table
There are two approach in creating a table.
1. Bottom-up approach
2. Top-down approach.
Both are valid and you can choose which approach is suitable for you. I always use the bottom-up approach. Here are the steps to create the tables with this approach.
1. SE11 will take you to the DDIC and enter the name of the new table to be created. Let us say Zname. Click create.
2. Enter the short discription of the table and enter the field of the table. If it is primary key and you have to check the box.
3. Enter the data element and double click it, you will be asked to save and will take you to data element discription page. Enter the short discription of the data element and enter the information of domain like the length of field and type of field.
4. If you wanted to use the existing domain then its fine, or else, you have to create one. Enter the domain name in the data element page and double click it. Page will ask to save and jump to domain creation page.
5. In the domain page, you have to save the information which you have already given in the data elements page and check it. Before going to data element page, you have to activate the domain.
6. Go to data element page and save, check and activate.
7. Go to main table page and save, check, and activate.
8. Also, you have to save the technical settings of the table.
The table is now ready for operation. You can use it in your program or you can use it to enter information.
Check table: It is the table which will have all the information about the Foreign keys which are the primary keys in the check table.
It can be created by creating the foreign key from the main table. Click foreign key in the main table and it will take you to a page which will ask for table name and field to which foreign key relation has to be associated. Enter the information and you can create the check table automatically.
SM30 is used for maintenance of the table, that is to realease the errors occured during the creation of the table.
how to integrate the table with defferent R/3
Transport the Table to the another server/client/qas/prd
Kanagaraja L

How to Create Event polling table

hi,
1)How to Create Event polling table
2) wahts RPD stands for.
3) when we are prefer Dynamic variables.
thanks.
raj

1) http://obiee101.blogspot.com/2008/07/obiee-managing-cache-emptyingpurging.html
2) Repository Project Design ?
- More than likely the extension RPD was not used by anything else when Siebel Analytics first started using it, no doubt the 'RP' is repository, so use 'Definition' or 'Design' as you like. Im pretty sure there is nothing in the documentation but i've not checked, maybe you could check and let us know?
3) Dynamic variables would be something like 'CURRENT_MONTH' where the same query does not need to fire per user (ie SESSION variable) but needs to be periodically refreshed. Another use of you dynamic variable might be 'LAST_ETL_DATE' or somethng similar which might implement with your event polling table. By including the Variable within a Business Model, all cache for the Business Model is purged whenever the Variable's value changes.

How to create a growing table with hierarchical increasing of rows Eg. For each row there must be a subRow i can add like for 1 i can add 1.1

Similar Messages

Maybe you are looking for