How to set Task Escalation policy at participant level in JDeveloper11 vers

Hello All,
Hello All,
We are developing a custom approval process for resource provisioning in OIM11g. At Operation Level, we are assigning tasks to Resource Administrator and Beneficiary Manager serially. We have a requirement like, task should never expire at Resource Administrator level, but at Beneficiary Manager level, it can expire and must be escalated to one level above.
We are using JDeveloper 11.1.1.3.0 and we understand that in this version of JDeveloper, there is an option to define an Escalation policy only at Global ( Routing slip) level. Apparently, in this version of JDeveloper there is no option to specify task escalation/expiry settings at individual participant levels.
Can anyone suggest us how to acheive this requirement?
A quick response is much appreciated.
Thanks in advance,
Venkat

hi
i think specifying start of the cycle for each maintenance level is not possible ,since start of the cycle refers to maintenance plan only .
for SAP standard kindly refer the following [link|http://help.sap.com/saphelp_46c/helpdata/en/94/43a968abc011d395bd00a0c93029cf/content.htm]
it is better to create one maintenance item per maintenance plan,if you want to control each maintenance item independently
regards
thyagarajan

Similar Messages

How to set up Group Policy without any server installed

How to set up Group Policy on Win8 without any server installed?
I have set up 50 users on LAN and want to push softwares via one common point. From google I found to deploy Software using Group Policy. But then Group Policy occurs in Servers and I don't have any server set up.

Hello,
a Domain requires at least one Windows server OS machine which has Active Directory installed.
As previous already mentioned from SenneVL this also requires that computers are added to the domain and that you create user accounts in Active Directory users and computers which stores the account information in the Active directory database.
In your case with single computers each machine has its own database(SAM) which stores passwords etc. this is different in a domain.
Each computer has a local policy which will be overwritten from centrally managed policies from the domain.
"The common point would be my PC (Admin PC) ."
This machine can not be used for your needs with software installation for 50 computers.
"How To Use the Group Policy Editor to Manage Local Computer Policy."
This is about the local machine and you cannot manage them for other computers from your Admin PC.
"DOMAIN part: By default Microsoft takes everyone on Workgroup. Is that not a default DOMAIN? or should I make one lets say "ABC" on every PC ?"
NO, this is NOT a domain.
http://windows.microsoft.com/en-us/windows7/what-is-the-difference-between-a-domain-a-workgroup-and-a-homegroup
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

How to set task description with paragraphs at runtime

Hi Experts, How to set task description with paragraphs at runtime. Now, i can set single content in task description.however, not sure, how to set content which have paragraphs.

Hi,
You can use HTML tags in the Task descritption.
Open the task not the workflow and there you can provide
<p> content/containers </>
You can use even <u>- Underlined text.
<h> for bold text
Thanks,
Sarayoodharan.K

How to set task type of a task in MS Project using excel vba code.

Hello Gurus,
I am generating MS Project files(.mpp) files form excel data. An excel macro in the excel file will read the excel data and will generate the .mpp file. It is working fine. now i want to set the task type of all the tasks to "Fixed work" from excel
vba code.
How to use the property PjTaskFixedType in setting the task type??
refer below links
http://msdn.microsoft.com/en-us/library/office/ff861713.aspx
http://msdn.microsoft.com/en-us/library/office/ff864157.aspx
Can someone help me in setting task type property from excel vba.
I have attached my sample code used to generate the mpp file. It is not the complete code but you will get an idea from it.
Set pjApp = CreateObject("MSProject.Application")
pjApp.FileNew
Set newproj = pjApp.ActiveProject
newproj.Tasks.Add (task_name)
newproj.Tasks(mpp_row_number).Start = task_start_date
newproj.Tasks(mpp_row_number).Finish = task_end_date
newproj.Tasks(mpp_row_number).ResourceNames = resource_name
pjApp.FileSaveAs mpp_file_save_path & mpp_file_name & ".mpp"
pjApp.FileClose
pjApp.Quit
Any help is appreciated.

Hi Syamku,
A simple example that sets the task type:
ActiveProject.Tasks(2).Type = pjFixedDuration
ActiveProject.Tasks(3).Type = pjFixedUnits
ActiveProject.Tasks(4).Type = pjFixedWork
http://msdn.microsoft.com/en-us/library/office/ff860469(v=office.15).aspx
Hope this helps

How to set task to start on the same day its predecessor ends

I want my tasks with depdencies to start on the same day that its predecessor ends.
This is what I want for example (note differences in bold):
Task 1
Start-Finish Date: 3/3 - 3/5
Task 2
Start-Finish Date: 3/5 - 3/6
Predecessor: Task 1
This is what MS Project sets it as default:
Task 1
Duration: 3/3 - 3/5
Task 2
Duration: 3/6 - 3/7
Predecessor: Task 1
How do I change this? Sorry, the bold doesnt work on this forum (Not sure why MS did this)
MS Project 2013

Hello,<o:p></o:p>
Please change the date format to show time, which will help to show start time and end
time along with dates. You can add time using below steps.<o:p></o:p>
Project 2010/2013: Click on File >> Options >> under general tab select the date format to show date and time<o:p></o:p>
Project 2007: Tools >> Options >> View >> Date Format<o:p></o:p>
By default task start time is 8 AM and end time is 5 PM. So if Task 1 finish date is 3.6 5:00 PM then the next task will start on next day 8 AM.<o:p></o:p>
You can change the duration of task1 to 1.5 days which will help to end the task on 3.6
12:00 PM and then the task2 will start on same day. <o:p></o:p>
I would not recommend changing the start and end date/time for task manually
as doing that will add constraint to the tasks. Instead of that you should change the duration for tasks and let MS Project calculate the dates for tasks.<o:p></o:p>
Hope this helps.<o:p></o:p>
Thank you,<o:p></o:p>
Kiran K.<o:p></o:p>

How to set page setup in ssrs report level

Hi All,
Can any one suggest pls.
I have a SSRS report which has 50 column data.
When i am exporting it to PDF its giving me 20 pages.How can i make it in 2-3 page max.
Please suggest and also when i am exporting to excel it looks fine but when printing it its giving me two page.How can it fit to 1 page in excel
pls help.

Hi i_pr,
In SQL Server Reporting Services (SSRS), it is designed to use 2 different rules in pagination: Physical pagination and Logical pagination. Physical pagination is used to the print control and the TIFF and PDF rendering extensions. It is controlled by the
PageSize properties.
If we want to use 2-3 pages to display these data, we can modify the PageSize to work around the issue. However, if we print the report, it maybe truncated. Because the limit of print paper. Did you get the extra blank page when you export report to PDF?
If so, please refer to the following thread to reduce the pages.
http://blogs.msdn.com/b/chrisbal/archive/2006/08/10/694892.aspx
In SSRS, if we have no page break in the report, we will get these data in one page when we export the report to Excel. The print layout is relate to paper size. Alternatively, we can adjust the report in Excel to work around the issue.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

Delivery Need By Default dates - How to set this at Site or Org level

Within iProcurement Requisitions - Looking to set the default for the Need By Date to current date + 14 days. The system is defaulting a +2 days and don't know where to change it.

Change POR: Days Needed By profile option from 2 to 14.
Sandeep Gandhi

How to set up Max Grab Qty in an order

Hi Experts,
Can you please help/hint me on how to set up Maximum grab qty (item level) for an order.
For example - If i set up material ABC with 50 Max grab Qty , then you should not be able to raise an order with qty greater then 50. VA01 should block it.
Thanks in advance for the response.
Regards.

Hi,
to do this enhancement, first decide the user exit and a put a break point. You will notice at the time sales order processing after entering the order qty whether its stopping at the break point or not. Offcourse you need a technical assistance here.
I guess the line item user exit ie at VBAP, would be more helpful to put the code. The piece of code depends on how you want the logic to work.
1.Is it that for every sales order you want to trigger this code, or if only in specific cases then you may even need to hard code.
2. Do you want check that the max order is not crossed even when a user changes the order qty through VA02.
3. Any other specific check that you want to consider.
Regards
Sadhu Kishore

How do I set the delivery policy for a queue in iMQ 2.0?

The list on page 67 of the 2.0 administration guide appears to be
incomplete. Specifically, I'm interested in knowing how to set
the default delivery policy for a Queue through the jmqobjmgr command.
I need the valid attribute name to pass in to jmqobjmgr.

The "queueDeliveryPolicy" is an attribute of a queue
created in the broker - not in the administered object
destination so that is why you are not seeing that
attribute on the list on page 67.
By default, the broker by will use the "single" queue delivery
policy unless you choose to change the values of the property
"jmq.queue.defaultdeliveryPolicy" to SINGLE, ROUND-ROBIN, or
FAILOVER. If you would like to do this, see the Chapter 4
in the admin guide on "Starting and Configuring the Broker".
It may be easier to set the delivery policy for just one queue.
To do this, you can use the following command:
jmqcmd create dst -n myQueue -t q -o "queueDeliveryPolicy=f"
where valid values to queueDeliveryPolicy is f, s, r.
You can do a 'jmqcmd -H' to get more info on queue attributes or
see Chapter 6 in the admin guide on "Creating and Destroying Destinations".

How to set a custom column in a workflow task.

Hello,
I'm looking for some assistance a bit with how to set a custom column in a Workflow Task.
I have a List Workflow that starts when an item is created in a list. The workflow, platform type SharePoint 2013, starts a new task, Task1, with Content Type 1. This Content Type has a custom column called Age. Once the Task1 is completed a new task, Task2,
with Content Type 2, starts and has the same column Age, as Task1.
How can I populate the Age column in Task2 with the content of the Age column in Task1?
Since I start the task by running "Assign a task to ..." Action I was thinking to copy the Age column from the Task1 to the list item that started Task1, which has a column Age as well, and then in Task2 to start another workflow - which is associated
with the Content Type 2, that would try to read the Age column from the list item that started Task2, which was set once Task1 was competed - I know it's complex but this is how I was thinking.
The problem with this approach is that I can't get a reference to the list item that started Task2 to read the Age from the list item.
Is there a better approach? I use SharePoint Designer 2013 to design all this.
Any assistance is appreciated.
Thank you.

Hello Sebastian,
you can get the Age column from Task 1 and then update the Task 2 Age column with that value. I am not sure why you want to run another workflow on Task 2.
You can perform below steps to set Age column from Task 1 to Task 2.
1. Create Task 1 using Assign a task , wait till the task is completed.
2. Get the Age column value based on Task 1 once the task is completed.
3.Create Task 2 using Assign a task , uncheck wait till the task is completed option.
4. Update the Task 2 with Age column in Task1.
5. Use Wait for the field to equal value , check for Task Status is completed or not.
>>The problem with this approach is that I can't get a reference to the list item that started Task2 to read the Age from the list item.
you can get the related item from task list item to get the main list item.
Other option is, Use Javascript and CSOM in task edit form to get the Age column from Task1 and prepoluate the Age value when Task2 is opened.
Hope this helps.
My Blog- http://www.sharepoint-journey.com|
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful

How to set View for Completed items inside Tasks?

How to set button for 'View' and see Completed items or not completed inside Tasks?

Hi,
You want to set custom views for Tasks folder so that when we click a view button, it will show all Completed or incomplete tasks, am I correct?
Which version of Outlook are you using? There are existing views for completed/incomplete tasks in Outlook. In Outlook 2010 and Outlook 2013, we can find the buttons under View tab > Change View. Click Completed button to view all completed
tasks; Click Active button to view incomplete tasks.
In Outlook 2007, just click View > Current View to switch between different views.
If I've misunderstood something, please feel free to let me know.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How to set password policy for apps users

Hi All,
Can anyone please help me.
I am working on apps 11i.
How to set password policy for users
Thanks

Check Note: 189367.1 - Best Practices for Securing the E-Business Suite
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=189367.1

How to set Mandatory Choice field while Creating Custom Task using Sharepoint Designer 2007

Hi,
I am new to Sharepoint development.I dont know whether i am posting the question in Correct place.Kindly redirect me to the correct place if i am posting it in wrong place.
I created a custom task in Sharepoint Designer 2007 using
Collect Data from User
Action.
I created a field in the task form which is of choice type and
unchecked allow blank values
because i wanted that field to be a mandatory field.When i handled that task ,i was able to complete that task
without selecting that mandatory field.But, I was expecting not to allow me to complete the task without selecting that field. Kindly tell me how to set the choice field as mandatory.

Hi,
You are using SharePoint Designer 2007, so I moved the thread to the appropriate forum for MOSS 2007.
This is by design that
Workflow-generated form (for action Collect data from User) does not perform validation properly on drop-down choices, the workaround is to use JavaScript to perform the field validation.
This thread has the JavaScript code can help you:
http://social.msdn.microsoft.com/forums/en-US/sharepointworkflow/thread/0ad7fc3c-97a1-464e-ae89-c3133462dda8/
Xue-Mei Chang

How to set duration of multiple tasks

Hello all. I am a new LabVIEW user and have a question on how to set a duration of a specific task and then initializing the start of another. I am using an Agilent N3300A load and I would like to simulate the "power-up" of the device I am working on. I want the code to start at 15A and then after approximately 1-2 milliseconds automatically drop down to 7A and continuously run. I am using GPIB and have set up a code to continuously run, but have not been able to achieve my goal. When I try to set up my timing, I can only achieve some sort of offset for each measurement. I've been attempting to use a timing loop, but do not entirely know how those work. Is there a simple solution that I am not aware of? Thank you to all of you who can help.

Do you know if your load can be programmed to do the current transition for you? I have a Sorensen that has two programmable levels which can be set to constant current, resistance or power. You can program it to go from one level to the other after a programmable time. You can also program the rising and falling slew rates independantly. The load has an analog 0-10V input that can be connected to a function generator, arbitrary waveform generator or one of the NI DAQ cards so that you can make any current waveform you want.
Although I am not familiar with Agilent loads I would be surprised if they can not do something similar. If your load has this capability then that is definately the way to go. Even with LabVIEW Real Time you will have to consider communications latency issues especially if they are not deterministic.
=====================
LabVIEW 2012

OIM-How can i set a password policy which does not contain any space?

How can i set a password policy which does not contain any space?
I put space at Characters not allowed but it is not working.
Can anyone help me out?

You can go to Settings>Messages and turn off Messages. Then go to Settings>General>Restrictions and turn on the the Restriction that prevent changing accounts.
I just verified that it works.

How to set Task Escalation policy at participant level in JDeveloper11 vers

Similar Messages

Maybe you are looking for