How to set the actionname property in B2B 11g

I have an outbound file sent via AS2 over http. I gather from other b2b forums/documents that for preserving the file name I have to set the actionname property. I have a BPEL process which is setting the fromTP, toTP, document TYPE etc, and then invoking the B2B and sending the document. Can I set the actionname property in the BPEL?
When I am trying to assign a value like "contentType:application/octet-stream;filename:abc.xml", I don't see any actionname property in the "To" side.

As there are three ways through which you may pass a message to B2B, so there are three ways to set Action name property.
If you are using SCA/Fabric then set below properties -
b2b.fileName
b2b.contentType
If you are using JCA JMS adapter, then set below property -
jca.jms.JMSProperty.ACTION_NAME
If you are using JCA AQ adapter then set -
ACTION_NAME
Regards,
Anuj

Similar Messages

How to set the item property to restrict the user to not to copy from above

Hi Guru's,
I have a requirement like, There were two items on the form name email Id, Confirm email Id.
I have to ristrict the user to not to copy from email Id item.. make him/her to enter the value into confirm email id item field manually.
How to set the item property to restrict the user to not to copy from above item and paste it in this item.
Please help.
Thanks!!

Just an opinion here, but that is about the dumbest requirement I have ever seen.
I am always annoyed by web sites that ask me to enter my email twice. I ALWAYS copy the email address from the original entry and paste it into the second one.
People enter their email addresses so often, it takes a real klutz to not get it right. And what makes you think that if they enter it twice, that they won't enter it wrong both times anyway???

How to set the 'text' property of a 'Header' region dynamically?

Hi,
I have a requirement to display the 'text' property of a 'Header' region, based on a query.
So I need to set the text property programatically in CO.
Can I use setText("..") by getting the handler to the 'Header' region?
If so, How to get the handler for the 'Header' region?
Message was edited by:
user594528

How to get the handler for the 'Header' region to call the setText()?
OAHeaderBean Header1 = (OAHeaderBean)...........................
Header1.setText("....");

How to set the target property of hyperlink through formula

Hi guyz,
I have a problem in setting the target property of hyperlink field. I'm using CR XI R2 with asp.net.
I want to set the target property of hyperlink as one of the frame on my webform. how can i do it through formula in crystal report.
I want to set it through CR because i don't have any way to identify the link fields uniquely. these link fields are generated dynamically from data base. I have some other links on my webform. If i try to get all links through javascript and change the target property it may effect some other functionalities, so i'm avoiding using javascript to set the target property of hyperlinks.
your help will be highly appreciated.
Thanks in advance
Deepak

You may want to look at the HyperlinkTarget property of the CrystalReportViewer. If you want all hyperlinks in the report to go to that frame, it should work for you.

How to set the cardinality property as 1..n for a dynamically created node

Hi...everybody
    I am creating Dropdown by index UI element and the
context atrributes dynamically.To bind multiple data to a dropdown
the cardinality property of the node should be 0..n or 1..n,
But i could not set the property of the dynamically created context node to 0..n ...
can any body suggest me..
I implemented the following code in WDDoModify View
IWDTransparentContainer tc=(IWDTransparentContainer)view.getElement("RootUIElementContainer");
IWDNodeInfo node = wdContext.getNodeInfo().addChild("DynamicNode",null,true,true,false,false,false,true,null,
          null,null);
IWDAttributeInfo strinfo=node.addAttribute("Value","ddic:com.sap.dictionary.string");
dbyindex.bindTexts(strinfo);
tc.addChild(dbyindex);
I could successfully display one value in the drop down,by adding the following code before the line tc.addchild(dbyindex);
IWDNode node1=wdContext.getChildNode("DynamicNode",0);
IWDNodeElement nodeElement=node1.createElement();
nodeElement.setAttributeValue("Value","Hello");
node1.addElement(nodeElement);
but when
i am trying to bind multiple values i am getting Exception ,,,,

hi
you are getting the exception because of cardinality property.
i.e   true,false and
you are trying to add morethan one element.
so,if you want to add morethan one than one element you have to set the cardinality property to true,true (or) false,true.
In your code do the following modification for changing the cardinality.
For 0..n -->false,true
      1..n-->true,true
IWDTransparentContainer tc=(IWDTransparentContainer)view.getElement("RootUIElementContainer");
IWDNodeInfo node = wdContext.getNodeInfo().addChild("DynamicNode",null,true,true,false,false,false,true,null,
null,null);
IWDAttributeInfo strinfo=node.addAttribute("Value","ddic:com.sap.dictionary.string");
dbyindex.bindTexts(strinfo);
tc.addChild(dbyindex);
hope this will solve your problem.
In addchild(..) the parameters are
addChild("Name ,
                Element class for model node ,
                Is singleton? ,
                Cardinality ,
                Selection cardinality ,
                Initialise lead selection? ,
                Datatype ,
                Supplier function ,
                 Disposer function);
Regards
sowmya

How to set the source property of image control dynamically?

Hi,
I have different fxg files which I want to display in a list. For each row in the List, I define which fxg file to be displayed in my database.
I need to know how to set the image1.source = (the fxg path) as a string from database?
Is there any conversion needed in this case? If so, can you please help me how to do this?

Hi,
Thank you for your response. I am new to Adobe Flash Builder, Flex and action script. I don't get your answer straight away.
What I basically need is, I need to set image1.source = strFXG. Right now, this does not show the image. I don't understand fxgObject.pathid.source => how to give this?
Moreover, when I did google search, there is somethink like fxg converter which converts the fxg to a component. I thought this is a very simple problem on how to convert the fxg string to an object format. But now, it looks like it might be a big problem. Can anyone help me in this?
import spark.components.Image;
                              protected function view1_creationCompleteHandler(event:FlexEvent):void
// TODO Auto-generated method stub
var strFXG:String = 'assets.DB_Actief_Graphics';
                                        var image1:Image = new Image();
                                        image1.x = 100;
                                        image1.y = 100;
                                        image1.source = strFXG;
                                        addElement(image1);
Regards,
Chella

Hi how to set the visible property in oracle adf?

Hi,
I am new to oracle adf in my application one of the field is id and it is sequence generated value Whenever I entered remaining values and click on save then only it has to display with sequence generated value before saving it has to be in hide mode. Can any one help me how the approach is.

As there are three ways through which you may pass a message to B2B, so there are three ways to set Action name property.
If you are using SCA/Fabric then set below properties -
b2b.fileName
b2b.contentType
If you are using JCA JMS adapter, then set below property -
jca.jms.JMSProperty.ACTION_NAME
If you are using JCA AQ adapter then set -
ACTION_NAME
Regards,
Anuj

How to set the AS2 fileName for outbound Functional Ack 997 auto generated by Oracle B2B

Hi Friends,
How to set the AS2 fileName for outbound Functional Ack 997 auto generated by Oracle B2B.
External Trading Partner is sending the EDI 856 via AS2 URL to our Oracle B2B Server.
In the inbound 856 agreement, we have checked the option of Funtional Ack and also Functiona Ack handled by B2B is yes.
We have the outbound agreement which is sending that Functional ack 997 (auto generated by oracle b2b) and we have specified the Outbound AS2 channel of the Partner.
997 doc is being sent to external partner using AS2 channel, but the filename is generating as '40101'.
Please can you let me know how to set the AS2 fileName for outbound Functional Ack 997 auto generated by Oracle B2B.
Appreciate your valuable answers!!
Thanks,
Amirineni

Amirineni,
AFAIK, there is no option to set the file name when the 997 is generated automatically by B2B.
Alternatively, if this is a must requirement, you can generate the FA from backend and send to B2B with MSG_TYPE =9. In this case, you can set the header with filename (How to set the actionname property in B2B 11g)

How to set the width for a selectManyShuttle component

Hi,
I'm using selectManyShuttle component from Oracle ADF Core and some of the items in the showing list are long, therefore the width of selectManyShuttle expands the page. How to set the width property for selectManyShuttle component? After that does selectManyShuttle provide horizontal scrollbar as well?
Thanks in advance,
lapi
Message was edited by:
[email protected]
Message was edited by:
[email protected]

Solution here:
Re: ADF Faces Scrollable Panel or Scroll Bar inside a component
Regards
Grant

How to set the number of sockets for batch processing at runtime?

Hello all,
I need to change the execution model at runtime. I have achieved this by setting the 'ModelPath' property of the sequence file at runtime. When I set the sequence file model as batchmodel, i need to set the number of test sockets also dynamically. How can this be done? Once i set the number of sockets, i would also have to set the UUT serial number for each socket. Please help me out in solving this.
Thanks and Regards
Madhu Srinivasan.

Hi Madhu,
You can do this by inserting a sequence file callback into your main sequence and choose the ModelOptions callback. You can then use the expression step to set the "Parameters.ModelOptions.NumTestSockets" value to whatever you want. If you then use the Test UUTs execution entry point you will be prompted for serial numbers automatically. You could also use this same procedure but alter the ModelOptions callback in the process model directly, either way works just as well but I think that using a sequence file callback gives a bit more flexibility in the system.
Hope this helps,
Nick

How to set the report path in a model plugin

I am trying to figure out how to set the report path in a process model plug-in. I can seem to figure out how to get access to it. It seems like this would be a reasonable thing to do since the plug-ins are for results processing. Does anyone know how to do this? We typically use the Sequential process model but I am trying to keep my plug-in as independent of that as possible.
Thanks.
Solved!
Go to Solution.

If I understand, you want your plug-in, when enabled, to alter the settings of any other instances of the NI report plug-in such that their reports share the same directory as your plug-in is configured to use.
If so, your plug-in can access and modify the settings of all other plug-in instances. All instances are passed to all plug-in entries point in the plugins array sub-property of the ModelConfiguration parameter. You can iterate through this array. Any element of the array with a Base.SequenceFilename equal to "NI_ReportGenerator.seq" is an instance of the NI report plug-in. Its report options are stored in the element under PluginSpecific.Options.
You can change the report options to what ever you want. Note that the ReportOptions model callback is called from the Initialize model-plugin entry point, so you might want to ensure that your changes are applied after that, so they aren't overwritten. To do that, you could make your changes in the the Initialize entry point of your plug-in, and ensure that your plugin runs last. To make it run last, you could set the FileGlobals.ModelPluginComponentDescription.Default.Base.RunOrder in your plug-in file to a value greater than 0, such as 1.0 (see TestStand Help>>Fundamentals>>Process Model Architecture>>Process Model Plug-in Architecture>>Structure of Plug-in Sequence Files>>Model Plug-in Entry Points>>Order of Entry Point Execution at Run Time).

How to set the default selection to "Select All" in a Multi valued parameter in SSRS 2008?

Hello Everyone,
How to set the default selection to "Select All" in a Multi valued parameter in SSRS 2008?
Regards
Gautam S
Regards

You need to specify "Default Values" in the report parameter property. Choose similar option used in the "Available Values" option, this will allow the parameter to check "Select All".
Regards, RSingh

How to set the width of DataGridColumn dynamically?

What I want to do is, load data from a text file and put into a DataGrid component, the fields of ech record in the text have fixed length, and are seperated by a space, like this:
personal.txt
50 Uvwxyz Male    123456789
60 Hijklmn Male    67890123456789
30 Abcdefg Male    123456789012345
40 Opqrst   Female 987654321012345678
the configuration file is column.xml:
<dgcolumn>
     <personal>
          <len>20</len>
          <title>Name</title>
     </personal>
     <personal>
          <len>3</len>
          <title>Age</title>
     </personal>
     <personal>
          <len>6</len>
          <title>Sex</title>
     </personal>
     <personal>
          <len>20</len>
          <title>IdNumber</title>
     </personal>
</dgcolumn>
First I load the column.xml into an arrColumn, then read the personal.txt and seperate the record by the width( "len" in the xml file ), and put the seperated fields into another arrField, set the arrayFld as the dataProvider of a DataGrid, thus, the title can be showed as the headerText of the DataGrid and the data can be loaded correctly.
private function handleComplete( event:Event ):void
     var arrField:Array = new Array();
     var arrFile:Array = loader.data.split(/\n/);
     for( var i:int = 0; i < arrColumn.length; i ++ )
          arrField[i] = convIcom( arrFile[i] );
     adgFile.dataProvider = arrField;
     trace( "The data has successfully loaded" );
private function convIcom( strRecord:String ):Object
     var key:String = null;
     var dataField:String = null;
     var offset:int = 0;
     var obj:Object = new Object();
     if( strRecord.length > 0 )
          for( var i:int = 0; i < arrColumn.length; i ++ )
               dataField = strRecord.substr( offset, arrColumn[i].len );
               key = arrColumn[i].title;
               obj[key] = dataField;
               offset += arrColumn[i].len + 1;
     return obj;
<mx:DataGrid x="10" y="100" width="400" id="dgFile" />
The problem is, the width of the DataGridColumn is average, how to set the column width by the length of each field? I can calculate the rate of each field ( field / fields ), but I don't know how to change the property of the DataGridColumn.width.
Thanks for helping.

In the above post, I pasted an old version of personal.txt, so I paste it again:
personal.txt
Uvwxyz 50 Male   123456789
Hijklmn 60 Male   67890123456789
Opqrst 40 Female 987654321012345678
Abcdefg 30 Male   123456789012345
And I have another question, when the data is loaded into the DataGrid, the fields of each record are ordered in alphabetical order ( the "Age" column will appear firstly, then "IdNumber", "Name", "Sex" ), not as the order in column.xml, how to make it keep the sequence of the xml file?
Thanks again.

How to set the screen size with nested Iview screen

Can someone show me how to set the screen size with nested IView screen.
at the moment i only try it with trial and error untill it looks somewhat close. Is there a property in VC to set the size for Height and width.
The same question is for the form. the form elements inside the form is easy but the actual form is still a challenge.

Hi,
Yes you are correct ,Still the Form and iview are not able to change thier Layout Structure using a Propery.
it is available with VC7.1
Govindu

Sun ONE Studio 4 aka Forte: How to set the output path for classes ?

Help !
Beginner's question:
Sun ONE Studio 4 aka Forte:
How to set the output path for classes ?
As default, the class files are created in the same directory as the
sources.
In opposite, both JBuilder and Together support that there is a tree
with the sources and another tree with the classes.
The first answer I got was "not possible with Forte, but just if you write your own "ANT Build script" !
a) Please point me to a ready-to-use ANT script for this purpose, if such is available
b) Is using ANT instead of the MAKE as comfortable ? Besides the separation of sourcecode and classes, I would like to keep everything else to be the same, i.e. I don�t want to edit the ANT file if I enlarge the project by directories or files.
Tia
Sincerely
Rolf

You can set S1S's options to place newly created .class files in a specific location.
Identify the compiler that is being used - Open the S1S's Tools/Options window, expand Editing and select Java Sources. Note the Default Compiler value. (If it's one if the Ant options, you use Ant to specify this option, not S1S.)
Open the S1S's Tools/Options window, expand Building/Compiler Types and select the appropriate compiler.
The Properties tab of the compiler has the property Target, which sets the filesystem where the compiler output is directed. If you choose <not set>, the .class files are written to their source directory.
When you set the Target, your change affects all classes that use this compiler.
Very few options can't be set in S1S; the challenge is finding out where they're set!

How to set the actionname property in B2B 11g

Similar Messages

Maybe you are looking for