How to set the amount of lines to scroll by mousewheel?

does anybody know how to do that ?

lagagnon wrote:
I think you need to add something like the line below to the "InputDevice" stanza of your /etc/X11/xorg.conf file:
Option "VertScrollDelta" "6"
-substituting "6" for however many lines you want. Then you have to reboot the X server of course.
thank you for the hint lagagnon,
my problem is that i do not have a xorg.conf file in /etc/X11/. Everything is working fine without it.
Im using a "20-keyboard.conf" to define my keyboard is there a similar way to do it for the mouse?

Similar Messages

HOW TO SET THE OUR OWN LINE SPACING ?

hai frenz...
i jus wanted to know how to set the our own spacing between the records or lines...
i.e.,
there shub be no spacing between the records when its getting displayed...
for e,g.,
actually my records are in the output screen displaying like this.....
hyundai   100    200
maruthi    100   300
tata         200    200
but i want to be displayed like this...
hyundai   100    200
maruthi    100   300
tata         200    200
how to do that........ reply me....

Hi,
Use SKIP Abap Statement
SKIP 2.
SKIP TO LINE 1.
SET BLANK LINES {ON|OFF}.
Example
REPORT demo_skip NO STANDARD PAGE HEADING.
DATA sum TYPE i.
TOP-OF-PAGE.
SKIP.
ULINE.
START-OF-SELECTION.
DO 10 TIMES.
    WRITE / sy-index.
    sum = sum + sy-index.
ENDDO.
SKIP TO LINE 1.
WRITE: 'Numbers with sum' COLOR COL_HEADING,
          sum               COLOR COL_TOTAL.

How to set the SCLK & SDO lines low...

Using a USB-8451 and need to set both the SCLK & SDO lines low as part of a prefix packet that I am sending to a device. how do I do it in LabView?
I can set the SCLK low using the 0 (Idle Low) input to the 8451 Config Property node but am not sure how to set the SDO low as needed.

steve05ram360 wrote:
Yes it is SPI. The device is an MB16024 LED driver from Macroblock.
Are you actually referring to the http://www.mblock.com.tw/products_mbi6024.html? (Note the "I" instead of the "1") Where does it say it's a SPI device? I don't see it saying SPI anywhere on that page. Do you have the actual datasheet? I was unable to find it on their web site.
maybe I cannot use the 8451 for this task?? ...
You can always use bit-banging mode.

Sending image sequence job to compressor in command line : how to set the framerate?

Hello,
In Compressor, when you import a image sequence, it's possible to set the framerate and add an audio file before choosing a preset and lauching the encoding task.
I want to dlo the same thing with command line. I know how to send a compressor job with command line, but no how to add theses settings.
In the compressor command line help, we've got this :
Job Info: Used when submitting individual source files. Following parameters are repeated to enter multiple job targets in a batch
          -jobpath <url> -- url to source file.
                                           -- In case of Image Sequence, URL should be a file URL pointing to directory with image sequence.
                                           -- Additional parameters may be specified to set frameRate (e.g. frameRate=29.97) and audio file (e.g. audio=/usr/me/myaudiofile.mov).
So there are also framerate and audio parameters in command line but i've no idea how to write the command line with theses parameters
Here is an example of command line for Compressor (by Apple) :
./Compressor ‑clusterid tcp://127.0.0.1:51737 ‑batchname myBatch ‑jobpath /Volumes/Source/ShortClips/NTSC24p.mov ‑settingpath /Users/stomper10/Library/Application\ Support/Compressor/PhotoJPEG.setting ‑destinationpath /Users/machinename/Movies/myDestinationFilename.mov.
Thank you for your help!

You can see in the command sh running-config command
show running-config : Displays the current access point operating configuration
Use the guest-mode SSID configuration mode command to configure the radio interface (for the specified SSID) to support guest mode. Use the no form of the command to disable the guest mode.
[no] guest-mode .
Here is the guideline for usage
The access point can have one guest-mode SSID or none at all. The guest-mode SSID is used in beacon frames and response frames to probe requests that specify the empty or wildcard SSID. If no guest-mode SSID exists, the beacon contains no SSID and probe requests with the wildcard SSID are ignored. Disabling the guest mode makes the networks slightly more secure. Enabling the guest mode helps clients that passively scan (do not transmit) associate with the access point. It also allows clients configured without a SSID to associate.
Examples
This example shows how to set the wireless LAN for the specified SSID into guest mode:
AP(config-if-ssid)# guest-mode
This example shows how to reset the guest-mode parameter to default values:
AP(config-if-ssid)# no guest-mode

How do you set the amount of time the screen stays lite after your last use?

How do you set the amount of time the screen stays lite after your last use?

Settings>General>Auto-Lock.

How to set the focus on the new added line in ALV list (OO)

Dear Friends,
I have an ALV list based on OO(using alv_grid->set_table_for_first_display), when I click the 'new' button to add a new line, the mouse arrow is always pointing to the first line - not the new created line for user to input!!.
So how to set the focus (mouse arrow) on the new added line in ALV list for user to input it friendly?
Thanks a lot!!

Hello,
To get the selected line row first we have get all the rows in the internal table.
When u click on the button when it is creating the new line we have to pass the row number to the call method
CALL METHOD <ref.var. to CL_GUI_ALV_GRID > ->get_selected_rows
   IMPORTING
      ET_INDEX_ROWS =   <internal table of type LVC_T_ROW > (obsolete)
      ET_ROW_NO      =   <internal table of type LVC_T_ROID > .
CALL METHOD<ref.var. to CL_GUI_ALV_GRID>->set_selected_rows
   EXPORTING
      IT_ROW_NO = <internal table of type LVC_T_ROID>
   or alternatively
   IT_INDEX_ROWS = <internal table of type LVC_T_ROW>
      IS_KEEP_OTHER_SELECTIONS = <type CHAR01>.
http://help.sap.com/saphelp_erp2004/helpdata/EN/22/a3f5ecd2fe11d2b467006094192fe3/content.htm

How can I sum all the amount per line?

HI,
How can I sum all the amount per line?
EXAMPLE:
[code]
                                         TOTAL:
1,000         2,000     5,200            $8,200
400         1,200     6,000             7,600
[/code]
THANKS!!

If you are sure of the number of columns that you are gonna get then you can add them to a variable and display.
total = itab-col1 + itab-col2 + itab-col3.
If you dunno how many columns will come , you have to use field symbols.
Say the datatabse table has 16 columns which will contain your price and you have to calculate the sum of all those , then assign them to field symbols and calculate.
Have a look at the following code.
FORM GET_VALUES_FROM_COSS .
FIELD-SYMBOLS: <FS1> TYPE ANY.
DATA: V_COMPONENT1 TYPE I.
V_COMPONENT1=31. " your field of table from which amount field starts
Cumulate the posting values of all the 16 period buckets as to get
total production order cost. This is to handle the partial posting of
production order values in different periods.
DO 16 TIMES.
    ADD 1 TO: V_COMPONENT1.
    ASSIGN COMPONENT V_COMPONENT1 OF STRUCTURE COSS TO <FS1>.
    IF COSS-WRTTP EQ '05' AND COSS-KSTAR EQ C_KSTAR1.
      ADD <FS1> TO I_FINAL-PL_LABCOST.
    ELSEIF COSS-WRTTP EQ '04' AND COSS-KSTAR EQ C_KSTAR1.
      ADD <FS1> TO I_FINAL-ACT_LABCOST.
    ELSEIF COSS-WRTTP EQ '05' AND COSS-KSTAR EQ C_KSTAR2.
      ADD <FS1> TO I_FINAL-PL_MATCOST.
    ELSEIF COSS-WRTTP EQ '04' AND COSS-KSTAR EQ C_KSTAR2.
      ADD <FS1> TO I_FINAL-ACT_MATCOST.
    ELSEIF COSS-WRTTP EQ '05' AND COSS-KSTAR EQ C_KSTAR3.
      ADD <FS1> TO I_FINAL-PL_OPCOST.
    ELSEIF COSS-WRTTP EQ '04' AND COSS-KSTAR EQ C_KSTAR3.
      ADD <FS1> TO I_FINAL-ACT_OPCOST.
    ELSEIF COSS-WRTTP EQ '05' AND COSS-KSTAR EQ C_KSTAR4.
      ADD <FS1> TO I_FINAL-PL_FACCOST.
    ELSEIF COSS-WRTTP EQ '04' AND COSS-KSTAR EQ C_KSTAR4.
      ADD <FS1> TO I_FINAL-ACT_FACCOST.
    ELSEIF COSS-WRTTP EQ '05' AND COSS-KSTAR EQ C_KSTAR5.
      ADD <FS1> TO I_FINAL-PL_LABCOST.
    ELSEIF COSS-WRTTP EQ '04' AND COSS-KSTAR EQ C_KSTAR5.
      ADD <FS1> TO I_FINAL-ACT_LABCOST.
    ELSEIF COSS-WRTTP EQ '05'.
      ADD <FS1> TO I_FINAL-OTHER_PL_COST.
    ELSEIF COSS-WRTTP EQ '04'.
      ADD <FS1> TO I_FINAL-OTHER_ACT_COST.
    ENDIF.
ENDDO.
ENDFORM.                    " GET_VALUES_FROM_COSS
Let us know if u need more inputs

How to set the caller tune on PRI-Line/CUCM 8.X

Hi Team,
If passible to set the caller tune songs or advertising in CUCM 8.x -( in place of ringing).
How to set the caller tune for incoming calls( advertising), including 4 digit extension. This feature is available or not (cucm 8.0.3) Kindly verify and confirm
regards,
Johnson

Dear Team,
Now i have configured the Call Queuing, Its working fine, But how to verify to incoming calls or Missed call are in queuing, how to showing.
Connected call are showing, but unable show missed call like who ever in queue.
Regards,
Johnson.

SRM 4.0- How to set the default values for product type (01) only for SC

The radio button Service should not be visible.
Also for search help (e.g. search for internal products) where a search should only be possible for product type 01 (goods). The system should not display the product type and internally always search for goods only.
How to set the default values for product type (01) only for SC
We needs to use Search help BBPH_PRODUCT which having parameter PRODUCT_TYPE
Here we can set defalut value 01 but it is not correct one since same search help is using several places.
We need to limit the search help results only for SC.
Kindly help out me ASAP.

The easiest way to set defautl values is to edit the batch class.
Goto the characteiristic and go to update values.
In here you probably have something like 0 - 100 as a spec range.
On the next line enter the default value within this range. At the end of the line, click in the box in the column labelled "D". This indicates the defautl value for the characteristic.
If you need to you can do this in the material classification view as well.
Just to be clear, these values will only show up in the batch record. You can not have defautl values in resutls recording screens.
FF

How to set the root path of XML document when calling Inserting procedure

Hi,
I was create a procedure to insert XML Document in to DBMS Tables, but i am not able to set the Start root element in calling procedure.
My calling procedure is
exec insXmldoc('pmc_sample.xml', 'pmc')
When i am calling this procedure i got this error
11:23:54 Error: ORA-29532: Java call terminated by uncaught Java exception: oracle.xml.sql.OracleXMLSQLException: Start of root element expected.
ORA-06512: at "SYS.DBMS_XMLSAVE", line 65
ORA-06512: at "SCOTT.INSPROC", line 8
ORA-06512: at line 2
I am checking my XML file using XML Validator. My XML file was parsed with out errors.
Please give the solution,and tell me where i did wrong in my calling procedure.
suppose i have this XML file in local E drive ,how to set the path for that XML file in my calling procedure.

Hi, I am doing the code likthis,please give the solution.
SQL> create or replace procedure insProc(xmlDoc IN CLOB, tableName IN VARCHAR2) is
2 insCtx DBMS_XMLSave.ctxType;
3 l_ctx dbms_xmlsave.ctxtype;
4 rows number;
5 begin
6 insCtx := DBMS_XMLSave.newContext(tableName); -- get the context handle
7 rows := DBMS_XMLSave.insertXML(insCtx,xmlDoc); -- this inserts the document
8 DBMS_XMLSave.closeContext(insCtx); -- this closes the handle
9 end;
10 /
Procedure created.
SQL> begin
2 insProc('/usr/tmp/ROWSET.xml', 'emp');
3 end;
4 /
begin
ERROR at line 1:
ORA-29532: Java call terminated by uncaught Java exception: oracle.xml.sql.OracleXMLSQLException:
Start of root element expected.
ORA-06512: at "SYS.DBMS_XMLSAVE", line 65
ORA-06512: at "SCOTT.INSPROC", line 7
ORA-06512: at line 2
Kishore B

How to set the default text in an input box or a label to be a predefine, multiline text

how to set the default text in an input box or a label to be a predefine, multiline text. In other words how to break the line in the code of a text box.
thank you

There are a couple of ways of doing this:
If you're editing on the canvas, press Shift + Enter.
If you're working in Express View (see lower right hand corner of Project Siena), you'll need to copy a hard return from another app such as Notepad.
I believe a better implementation of hard returns are in the list of requested functionality that you can find here:
https://social.technet.microsoft.com/Forums/en-US/2e1f9446-56b2-419a-9c17-7037d2cd6146/from-the-community-overview-of-requested-additional-functionality?forum=projectsiena
Thor

How to set the password encrytacion a database. Accdb from Visual Basic 2010 for a report. Rpl

I want to know how to set the password encrytacion a database. Accdb from Visual Basic 2010 for a report. Rpl

You have to connect via ODBC, then use code along the lines of what is described here:
http://scn.sap.com/thread/3526924
by me on March 28 and Jan on March 29.
Also see KBA: 1686419 - SAP Crystal Reports designer does not recognize Access *.accdb file
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

How to set SAXParser at command-line interface to create a large XML file

Hi,
I am trying to create a large XML file (more than 50 MB) by selecting from Oracle database but failed because of "out of memory" error. According to "Oracle XML Developer Guide", we should use SAXParser to parsing a large XML file. But there is no example to show how to set SAXParser at command-line
Following is what I use to get xml files. It works only when the file is small.
java OracleXML getXML -DateFormat -withDTD -rowsetTag PO_HDR -conn
"jdbc:oracle:oci8:@server_name" -user "ID/password" "select * from table_name"
When I set SAXParser at the way below,
java oracle.xml.parser.v2.SAXParser OracleXML getXML -DateFormat -withDTD -rowsetTag PO_HDR -conn
"jdbc:oracle:oci8:@server_name" -user "ID/password" "select * from table_name"
it failed with the error message: "In class oracle.xml.parser.v2.SAXParser: void main(String argv[]) is not defined"
Does anyone know how to solve the problem? I'll be appreciated very much for your help.
Yi

here are my ideas.
register the xml schema.
using xmldom, generate the desired xml output and return as xmltype.
then you can use something like this to check.
declare
xmldoc xmltype ;
begin
   -- populate xmldoc from you xmldom function
   -- validate against XML schema
   xmldoc.isSchemaValid(schema_url, root_element);
   if xmldoc.isSchemaValid = 1 then
        --valid schema
   else
        --invalid
   end if;
end

How to set the PATH in Terminal?

As a newbie to Bash and the Terminal, in connection with installing a new version of Ruby and various add-ons, I have been messing around with changing the PATH via various methods I've found on the internet, and trying to add a new directory to my PATH. Unfortunately, I cannot figure out how to set the PATH correctly. Here is what I understand so far:
1. Bash first looks to ".bash_profile" in the home directory for PATH settings.
2. If none, Bash then looks to ".bash_login" for PATH settings.
3. If none, Bash then looks to ".profile".
4. If none, Bash then looks to a system file in "/etc/profile" for default PATH settings.
5. For a new shell after login, Bash looks for a ".bashrc" file.
I cannot find any of the above files (I have Finder set to show hidden files already). Somehow, following some instructions from the internet without really knowing what I was doing over the past week I have set my PATH as follows:
/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/Users/*****/src:/usr/X11/bin
but I cannot find the file that is setting this PATH. I have tried creating a new ".bash_profile" shell file and putting it in various places such as "/bin" and "/usr/bin" but the file is not being read.
* As a temporary workaround I tried using the command "source .bash_profile" upon login to set the PATH using the .bash_profile file that I created, but it does not work.
* I am able to temporarily alter the path using the command "PATH=/usr/local/bin:$PATH" but this only lasts for an active shell; when I close out and reopen a new shell, it reverts to the default.
So my questions are:
Is it correct that there is a "/etc/profile" somewhere that is setting the default PATH? If so where is it? Should I alter it, or create a new ".bash_profile" somewhere to set the PATH? If not, where is my PATH being set? If I should create a new ".bash_profile", what exactly should go in it?
Thanks in advance for any assistance.

... I created a new ".bash_profile" file directly under my home directory and it worked like a charm. Below is the content of the file:
"PATH=/usr/local/bin:/bin/:/sbin/:/usr/bin/:/usr/sbin/:/Users/******/Ruby:/Users/*******/src:/Users/******/Java Programs/"
What are the "..."'s? Is that just you, or is the contents of the file actually inside of double quotes?
is there an 'export PATH' also in the file? As in
PATH=/usr/local/bin:/bin/:/sbin/:/usr/bin/:/usr/sbin/:/Users/******/Ruby:/Users/*******/src:/Users/******/Java Programs/
export PATH
And did you either restart your Terminal session so your .bash_profile was read, or issue a 'source .bash_profile' command to execute the .bash_profile after your change?
The only remaining problem is that from the home directory, I'm unable to directly run programs in the above-designated subdirectories (without first navigating to the subdirectory containing the file. Is there something wrong with the syntax or order of the directories I put in the path?
For example: there is a file called "newprogram.rb" in the "Ruby" directory listed above. I should be able to execute it from the home directory using "ruby newprogram.rb" but it does not work. The same command works fine from within the "Ruby" directory.
Does the 'ruby' command search PATH to find its scripts?
Have you read the "man ruby" man page to see if it talks about PATH?
A common Unix feature is that programs and scripts with the executable bit set, and are located in a PATH directory, will be run if you just type their names.
For example, if the first line of newprogram.rb script starts with
#!/usr/bin/ruby
and if the script is executable
chmod +x newprogram.rb
And if it is in a directory in PATH, then just typing
newprogram.rb
should run your perl script using /usr/bin/ruby. If you want to use a different version of Ruby, then change the #! line so it point to your version of Ruby. Or if your version of Ruby is found earlier in PATH then the /usr/bin/ruby, you can use
#!/usr/bin/env ruby
as your script's first line which will search PATH for 'ruby' and use the first one it finds.
Message was edited by: BobHarris

How to set the size of a JTabbedane to the size of the frame

I have a tabbed pane in a frame, I would like to know how to set the size of the tabbed pane, so that it occupies the whole of the frame which has been set to screen size.
Thanks

Is it not possible to use it with a GridBagLayout?Your question was "How do I get a tabbed pane to take all the space of the frame"?
You where given the answer. Did you try it? Did it work? Then why are you questioning the suggestion?
Its one line of code if you use a BorderLayout which by the way was specifically designed for this purpose.
Yes you can do it with a GridBagLayout with about 5 lines of code.
So the question is why would you want to write 5 lines of code when you can use one?
If your question was "How do I waste my time forcing the GridBagLayout to size a component to take up all the space of the frame", then you would have received a different answer. (Although most people would have told you to use a BorderLayout anyway, since its easier).

How to set the amount of lines to scroll by mousewheel?

Similar Messages

Maybe you are looking for