How to set the Front panel to "Set origin at top left"???

Hello all,
Whenever i run the program the position of controls and indicators in sub panel changes so i wish to set the front panel which i am calling in sub panel to set its origin at top left corner. but i dont know how to do that.
Can anyone help me in this???
Thanks in advance...
Pals

Hi All,
This is the sub vi which i need to call in sub panel.....
Scroll bar on mail vi is ok but to make all the controls ad indicators visible i need to keep on scroll of called vi also.
Thanks a lot...
pals
Attachments:
Untitled.jpg ‏80 KB

Similar Messages

How to resize the front panel to fit different resolutions

I m using LabVIEW 8.2 on Windows XP SP2
I've tried both “maintain proportions of window for different monitor resolutions” and “scale all objects on front panel as the window resizes” selected but just messed up everything when i switched to another different resolution. It's annoying since I'm using 22 inch monitor to do the coding but the user supposed to run it on laptop or wince.
Any solutions to it?
Thx in advance.

Thank you all. Following is the reply from NI support. I think the best way is to edit vi in low resolution.
One of the easiest ways to tackle varying screen resolutions is to design
the front panel to the lowest resolution that you expect it to run on. It
should then look acceptable on any screen larger than that.
However, you can get a bit more tricky by programmatically determining the
computer's screen resolution and then dynamically changing the size of your
front panel objects. Use an Application Property Node and select
Display>>All Monitors to return the current screen size. Then, according to
the screen size, you can size the control or indicator programmatically
using the Size property node for your front panel objects.
Ultimately, these issues have often been a result of font size issues.
Specifically, this can be a problem when two machines have different
desktop theme/font settings. If your objects are coming out in different
sizes on different computers, you can setup up LabVIEW to use the same font
on different systems by modifying the .INI file.
The easiest way is to do this: use Tools->Options->Fonts from the LabVIEW
GUI. You can then set the system fonts to anything you want. After you
have done this on one machine, open your INI file (it is in the same
directory as the LabVIEW executable) with any text editor and copy the
corresponding entries to another file. Add these entries to the INI files
on any machines you want to lock to font. You will probably run into
issues if you are supporting different platforms (Windows and Mac or Mac
and Linux, for example), since the fonts you want may not be available on
both platforms. There are Windows fonts available for both Mac and Linux
platforms, so this can be somewhat ameliorated.
This is all I can think of, but that's not to say these are the only
solutions. You might check the Discussion Forums, as many of our LabVIEW
Champions have tackled similar issues and offer their expertise as well.
Here's just a few threads that I'd like to refer you to:
How to make the size of VI and controls unchanged irrespective of the
resolution?
http://forums.ni.com/ni/board/message?board.id=170&message.id=273613&requireLogin=False
How to program the front panel size to fit different monitor resolution?
http://forums.ni.com/ni/board/message?board.id=170&message.id=87160&requireLogin=False
I hope this discussion helps you along the way in your application
development. Please let me know if you have any further questions/comments
and I would be happy to discuss them with you.
Otherwise, it was a pleasure assisting you and thank you for choosing
National Instruments.

How to show the front panel when launching VI with Call by reference node??

Hello!
I just wonder how I make the front panel visible during execution when I launch the VI with CALL BY REFERENCE NODE.
Se example.
Could u also show me how to change different properties (window size ..) of the front panel??? (launched with CALL BY REFERENCE NODE)
Thank you!
Attachments:
test.vi ‏18 KB

In VI Properties>>Window Apperance>>Customize you can check "Show front panel when called". This will open the front panel on each call. It doesn't matter how the call was initiated.
You can set a lot of Front panel properties during runtime. Place a Property Node in the block diagram. Change the class from App to VI. Under properties select Front Panel window>>Panel bounds to set the position and size of the front panel.
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions

How to save settings in the front panel to different files and retrieve it later?

How to save the front-panel controllers' settings to different files and retrieve it later?
What I've archived is the "Save Settings" function, but when trying to "Reload Settings", I can only retrieve the saved data to front-panel indicators, but not the controllers!
Can anybody give me some advises?
Thanks in advanced!
Charles Lu

Hi
Just write the retrieved data to a local variable (but make it writable first) or property node of the controls.
Hope this helps.
Thomas
Using LV8.0
Don't be afraid to rate a good answer...

Programatically alther the properties of the front panel of another vi (vi server)

hi all,
check out the attached code (lv 8.6). this is a standard example of how to modify the properties of another vi (test.vi and test1.vi in this case). although the properties of the called vi are set, the front panel does not react accordingly. for example:i set fp.minimizable to false and double checked that the value is actually set. but the front panel still is minimizable. why? where is the error?
thanks in advace
labviewette
p.s if you want to run the attached code, you have to create a test vi in the same directory in which the code is saved.
Attachments:
Setting Window Options.vi ‏22 KB

Minor errors in your code :
1 - set "wait until done to false" when running Test.vi from your vi
2 - connect "Show menu bar" to the case input instead of a constant
Then everything runs nicely. See modified vi below.
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...
Attachments:
Setting Window Options.vi ‏22 KB

Looking for a way to programmatically set the visible portion of the front panel when a subVI opens

I am looking for a way to programmatically set the visible portion of the front panel when a subVI opens. Haven't found any posts that relate, but I'm not sure how to ask the right question. To be clear, I want to write a helper VI to go through a list of subVIs to make sure the background images are all in the same place when their respective subVIs open. I hate manually playing with scroll bars before I save each of the VIs... I'm figuring I need to find the top/left location of the background image (know how to do this already) and then set a VI FP property to these values or some offset, but I can't find the relevant property. FP:run-timeposition:custom looked promissing, but only affects the location of the window, not the area of the front panel the window is displaying.
Solved!
Go to Solution.

Cool. Getting closer. The way I implemented your suggestion affects the subVI only if it is open. I can use this to do what I'm after, perhaps putting the code into each subVI. Maybe open all subs, run the helper, and save. Seems like I'm missing the elegant version...
My proof of concept code:

Hi. I want to build a GUI based on several windows appearing following a certain sequence. How can i create different windows in the same VI? Also, i want the front panel of a subvi to appear when i run, how can i enable this.Thanks

Having several windows appear ...

Hi,
You can't create several windows for one VI. But you can use the "Tab Control" and change tab's in the program. Or you can use sub VI's and show ther front panels.
To show the front panel of a sub VI you have to open the VI you want to show and select "File->VI Properties". In the VI Properties window select Category "Window Appearance" and click Customize...
In the Customize Window Appearence window, here you can set a number of attributes for how the window will appear, select "Show front panel when called" and "Close afterwards if originally closed" click OK and OK and save the VI, done.
Now the VI front panel will appear then you use it as a sub VI.
/Thomas

How to get the position of the stem in control valve using slider control in the front panel

I have created a calibration program for a control valve. Signal (4-20mA) is generated from labview using slider contorl which is given to the valve via DAQ(module 9265) and again the feedback signal from the valve is acquired using DAQ(module 9203).. . There is an input ISO/ISC(Increasing signal to open/ Increasing signal to close) in the front panel.
ISO would set the output to increase from (4-20)mA further opening the valve
ISC would set the output to increase from (4-20)mA further closing the valve
I have doubt, how can i get the position of a stem

Ravens Fan wrote:
If the position of the stem is being sent to the PC through a 4-20 mA signal into your DAQ 9203 module, then you just need to do an analog input read in order to get the signal.
When reading this post, that is what came to mind... So let's see if both RavensFan & I are trying to understand the same thing... Are you saying that the position of the stem is linear (or scaled) to the amount of current sent to it? Meaning a 4mA signal would move it a certain distance, and 10mA would move another given / known distance? Or are you saying that it is calibrated so that a 20mA signal for a certain duration (ms) would move it a given distance? So the scale would be time and not current unless a lookup table is used to adjust the time duration based on the current being drawn...
It's just that I am not familiar with solenoid / drive devices that related to current.. To voltage, yes. To time, yes.. To current, I'm simply saying that I am not familiar with that. Can you tell us more about this stem (mfg / model designation)?

How can I make an area of the front-panel have scroll bars?

I'm writing a VI that provides many options to the user. The front-panel is large and contains many controls ~130 of them, it's divided up visually to match the workings of the system the VI controls. One particular functional block has very many control options though these are rarely used. I can't fit all of the controls I need onto the screen area I have available.
What I would like is a way of making an area of the screen with scroll bars on it. I don't need any more than that, just an expansion of the front-panel area I have available. The "Sub-Panel" feature provides the scroll bars. But, a Sub-Panel is a way of accessing another VI, I don't want to do that. I could put the extra controls on the far-left or far-right of everything else and get the user to scroll the main scroll bars at the edges of the screen. The problem with that is that I it would mean couldn't lay out my front panel to match the system block-diagram as I have so far.
Does anyone know how to do this?
Solved!
Go to Solution.

I know I can show the scroll bars at the edge of the VI. In my case that's not very useful. The front panel shows a block diagram of a system. It's made up of a set of clusters which control various parts of the system. I want to keep this layout because it's very useful in explaining to people new to the system how it works. I inherited that approach from a previous iteration of the program for an older system. The problem I have is that the new system has far more control parameters for one of the blocks. Unfortunately it's one of the blocks in the middle of the block diagram. If it were one at the left, right, top or bottom it would be no problem because the main scrollbars could be used.
I can use a tab-control, that's my fall-back plan. The problem is that would be abusing the purpose of the tab control. In a tab control each tab is supposed to deal with a group of controls that have a common connection. So, all the things in tab #1 are supposed to be connected in some way and all the things in tab #2 are supposed to be connected in some way. There not supposed to be a way of gaining more screen space.
The controls I'm dealing with are numeric controls, switches and rings.

How do you control LED lights on the front panel to identify the number of steps a stepper motor has taken?

I am controlling a stepper motor that is coupled with a valve with four outlets (using an Arduino). I've got a general understanding of how to control the motor, but I want LED lights on the front panel to light up that indicate which outlet the valve is currently at after the steps are taken. The method I'm thinking about involves a lot of repetitive code. I'm not that experienced with LabVIEW, I'm assuming I need some sort of loop structure but I don't know how to set it up in order to control the sequence of the LEDs. I've attached my current block diagram for a visual aid if needed.
Attachments:
Capture.JPG ‏33 KB

I was thinking about using the Stepper To Go and Stepper Write functions four separate times, using the same constants for the steps each time since the distance between each outlet is equivalent. The only difference would be what's connected to the "steps remaining" node, which would be the function that activates one of the four LEDs (if that makes sense). I was thinking that doing it this way would be a little counterintuitive since the only thing that needs to be changed is the LED indicator.

How to: display large error note in the front panel?

hi guys,
When "error out" has an error, I would like to display HUGE RED TEXT in the FRONT PANEL saying: "STOP, ERROR DETECTED!" )
How to do that?
Thanks for your help.
Solved!
Go to Solution.

Place an indicator on the panel. Set the text to HUGE and RED, and set its value to "STOP, ERROR DETECTED!". Make it not visible. When you get an error, use the "Visible" property node to display it.
To learn more about LabVIEW it is recommended that you go through the tutorial(s) and look over the material in the NI Developer Zone's Learning Center which provides links to other materials and other tutorials. You can also take the online courses for free.

How can we get an image of selected area of the front panel

i am plotting some graphs and want a group photo of all those in one shot is it possible????
n i want to get the graph coordinates on the mouse click.....
i.e when i click on the graph at any place the values corresponding to it must be retrieved. how do we do that,,...
i have tried with the labview help but didnt get any help
help please????????

Here's a start. This will get the front panel image and display it as a picture indicator.
You could use an event structure to capture the mouse clicks on the picture control to set the image area. Then using the mouse coordinates (referenced from the image coordinates), you can get the image subset "Get Image Subset.vi".
Message Edited by vt92 on 04-20-2010 08:30 AM
"There is a God shaped vacuum in the heart of every man which cannot be filled by any created thing, but only by God, the Creator, made known through Jesus." - Blaise Pascal

How do I center and/or maximize the front panel on every event?

Hi,
So basically I have a little issue with trying to maximize and then scale back a VI's front panel every time a user selects a different option from a ring control.
So far i've been using the LVWINUTIL.LLB and the provided window size vi to set the size I want on ring selection change which works fine, but as far as centering the VI goes, the method I'm calling only works the first time. After it maximizes and I select a different option on my ring control which is linked to a case within a while loop it simply resizes to the size i set which is correct but when I got back to the ring case which is supposed to maximize the front panel again, it doesn't do it. Centralizing the FP also only works once.
I'm using FP.Run-Time Position.Centered to try and center the VI....only works once. I do understand that this might be the desired behavior since the name is run-time position meaning it'll only do this when the VI is first run, however I need this to happen more then once, how can i do this? Thanks...

How did you center the FP?
Their a method that should work time after time.
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

How to programmatically load and show the front panel of a vi but NOT run it?

Is there a way to load and show the front panel of a vi but NOT run it? I am starting with the AsynchronousCallAndForget.vi from the example finder and inserted an invoke node with the FP Open method call prior to the Start Asynchronous Call node. The vi I am loading has the "Run when opened" unchecked and the menu bar IS visible so I can manually click the run arrow. Thanks!
Solved!
Go to Solution.

Why are you using the Async call? If you simply open the VI reference, then call the FP.Open method this works fine. You can then call the VI run method with Wait Until Done set to false if you wish to run it Asynchronously, this is how we did it in ye olde days before we had this new fangled "Start Asynchronous Call" stuff.
Charles Chickering
Architecture is art with rules.
...and the rules are more like guidelines

How to synchronize presentation on the front panel to the start of a 75Hz monitor's retrace cycle?

How to synchronize front panel presentation with the start of a retrace cycle of a 75Hz Monitor, so when a bitmap is presented 100ms, its duration is indeed 100ms on the monitor?

Hi,
In the old days (late 90's), we used in port and out port to wait for
vertical retraces (or even horizontal retraces).
I searched the web (vertical retrace), and there seem to be lots of
infromation and tools, like
http://www.compuphase.com/vretrace.htm
It uses a simple routine:
mov dx, 3dah ; VGA input status register
vretrace_loop:
in al, dx
test al, 8 ; bit 3 set?
jz vretrace_loop ; no, continue waiting
But to get it working, you need a VxD. Good news is you can download it.
The also suggest you use WaitForVerticalBlank(), but dx could be hard to get
working under LabVIEW.
Please let us know how (and if) you got it working with LabVIEW!
Regards,
Wiebe.
"Vinci HK" wrote in message
news:[email protected]...
> Hi Robert,
> I am so excited to have received a response! Sorry that I didn't reply
> earlier as I have been out of town. You are understanding the problem,
> so good!
>
> I just want to know the exact duration a stimuli in the front panel is
> presented. I can make it to last for 13 frames, but the problem is to
> ask LabView to synchronize with the start of a frame.
>
> The crucial thing is that I want a trial of presenting 700ms blank
> screen + 1300ms bitmap will add up to 2000ms on the front panel. And
> in the next 2000ms, a different bitmap will be used for the 1300ms.
> The start of a trial is initiated by a pulse from the parallel port. I
> need the 2000ms on the front panel to be really 2000ms+/-5ms.
>
> My worry is that even if I buy the external clock and the RealTime
> system of LabView, I won't be able to get the front panel to
> synchronise with the refresh cycle of the monitor, so that the trial
> length as it appears on the front panel is 2000ms +/- 5ms.
>
> What do u think?
>
> I am using LabView for my fMRI experiment, and I wonder if you know
> anyone from the fMRI community who are using LabView for stimulus
> presentation and synchronization with MRI data acquisition?
>
> Thanks,
> Vinci

How to set the Front panel to "Set origin at top left"???

Similar Messages

Maybe you are looking for