How to set the length of the reverb? (GarageBand)

Hey Guys,
im from germany and im just mixing and recording some songs in my free time with garage band 11.
When im recording my Voice and im using a reverb for it, i just can set the loudness of the reverb. but i want to set the lenght of it, i want to ask you guys how i can do that?
thanks a lot

Gern geschehen! Take good care of the old GarageBand '11 and make sure you back up your system as it is now, just in case!
i have another question, its almost the same content how is it about the echo? in the older version, i could easily change the type of the echo, for example in which tact it should be or how much it should be repeated and so on.. oh, I wish it wasstill as easy as before!!!
The Smart Controls will allow you to change some effects on a track, but the available effects will depend on the patch you selected. Get yourself HangTime's marvellous Effect Finder - this will help you to find out, which patches will have which effects: Download here: http://www.bulletsandbones.com/GB/File%20Pages/DownloadsGB.html
For the echo you can also use the automation curve on the track, just like for Reverb.
-- Léonie

Similar Messages

How to restrict the length of the input?

Hi all, could any one tell me how to restrict the length of the input string? My SOA Suite is 10.1.3.1
I tried the following; getting an error.
<element name="RestrictLengthProcessRequest">
<simpleType name="SSN">
<restriction base="string">
<length value="10"/>
</restriction>
</simpleType>
where RestrictLengthProcessRequest is the message name of the corresponding .wsdl and SSN is the input whose length is to be restricted.
The error is : 'Attribute name not defined on element simpleType'
Thanks in advance.
Edited by: user11275112 on Aug 27, 2009 11:44 PM

Hi swathi,
For this you have to create a simple data type. No need of writing a code.
Go to Dictionaries -> Local Dictionary -> Data Type - > Simple Type - > Right click and "Create Simple Type".
Here you should create a Simple type with String as built-in Type. Here you will also see the Length Constraints option.
Set the value of maximum length and minimum length. In your case set the value of maximum length to 10. At runtime this will not allow the user to enter more than 10 characters.
Now create an attribute and bind it to this newly created simple type. Bind the value of the input field with this particular attribute.
Regards
Manohar

How to find the length of the resultset

how to find the length of the resultset

(Doing a select count as somebody suggested is nota
good solution, as the count can change betweenyour
count query and your real query.)And the number of rows can't change between getting
the last one and doing the actual work?I don't think so. Once you've got the ResultSet, I don't think it will change under you, unless you explicitly set it to SCROLL_SENSITIVE.
I could be mistaken though.

Setting max length of the field when using Context Model Node

I have created a model using Import Adaptive Web Service model option (a web service was a wrapper around SAP BAPI function module).
There were no dictionary types created in the Local dictionary as a result of import.
I have mapped the context of the controller to the model node.
One of the fields in the model is name CUSTOMER_NUMBER type string;
Corresponding element in the wsdl of the web service is
<xsd:element name="CUSTOMER_NUMBER" type="tns:char10" />
I have created a view with the input filed mapped to the CUSTOMER_NUMBER field of the model node.
When I type more than 10 chars into the field and hit the search button, I get a com.sap.dictionary.runtime.Ddcheck exception that the length of the field should be less than 10 chars.
How can I set the max length of the field in design time to prevent runtime exception?
Thanks,
Julia

Thank you for your reply.
Java trim function will trim the white spaces only, not the characters.
I can code check length functionality before calling execute function (the function that call the web service).
I can also create a dictionary structure based on the model structure; create a context value node based on the dictionary structure and use WDCopyService API to move the data between value node and model node.
I was looking for the best practice...
When importing model based on Adaptive RFC, the dictionary structures are imported together with the model. This does not happen for Adaptive web service - hence there is a need to add coding for simple checks.
Julia

How do i make a still image (photo) fit the length of the music? I record music and want to put the tracks to a video file with a still image of my business logo in the background. Any help?

How do I make a still image (photo) fit the length of the music? I record music and want to convert the tracks to a video file with a still image of my business logo in the background. On windows movie maker you could just select "fit to music" but this program isnt as easy to figure out! Any help?

Double-click on the still image in the project timeline to open the Inspector. In the Inspector, adjust the duration by typing in a new duration to match the length of your music. I think the limit for a still image is 10 minutes. If you need more than this, simply drag the image into the timeline again then adjust its duration. The two images will play seamlessly (no gap will be visible).
See this iMovie Help topic:
http://help.apple.com/imovie/#mov3a883915
You can achieve more precision when entering durations by changing a preference in the menu item iMovie Preferences. Check (tick) the preference for Show Time As HH:MM:SS:frames. This will enable you to enter the duration of stills down to the frame level, rather than full seconds (NTSC is 30 frames per second; PAL is 25 fps). When entering times, type a colon between each time segment, such as 2:50:15, which represents 2 minutes 50 seconds and 15 frames. For 5 seconds 20 frames you would enter 5:20 and so forth.
Note that the music will only run to the length of the video in the timeline (in your case, the still images). So, after increasing the stills duration you will need to drag the end of the music track as far as required. The stills can be dragged inwards to reduce the duration if necessary.
John
Message was edited by: John Cogdell - added Note

How to set white spaces between the fields in dataset??

Hi all,
I am writing a set on information to from infotypes to a text file. Its a fixed width file. How do set white spaces in the fields for dataset?
Example:
TYPES: begin of header,
                filler(40) type c,
                id(3)        type c,
                filler2(7) type c,
                delimiter type c,
             end of header.
DATA header type header.
header-filler1 = ' '.
header-id       = '100'.
header-filler2 = ' '.
header-delimiter = cl_abap_char_utilities=>newline.   ( do it to get a new line)
my_table = header.
append my_table.
DATA: out_file(256) type C,
      codepage_ref type ref to CX_SY_CONVERSION_CODEPAGE,
      out_char type c,
      size type i,
      insert_string type string,
      insert_size type i.
out_file = filename.
open dataset out_file for output in text mode ENCODING NON-UNICODE.
LOOP AT my_table.
    size = strlen( my_table ).
    insert_string = ''.
    DO size TIMES.
      offset = sy-index - 1.
      try.
          out_char = my_table+offset(1).
          IF out_char = SPACE.
            CONCATENATE insert_string '' INTO insert_string SEPARATED BY SPACE.
          ELSE.
            CONCATENATE insert_string out_char INTO insert_string.
            transfer insert_string to out_file NO END OF LINE .
            insert_string = ''.
          ENDIF.
        catch CX_SY_CONVERSION_CODEPAGE.
          insert_size = strlen( insert_string ) - 1.
          insert_string = insert_string(insert_size).
      endtry.
    ENDDO.
   transfer CL_ABAP_CHAR_UTILITIES=>NEWLINE TO out_file NO END OF LINE.
ENDLOOP.
close dataset out_file.
How do I get to insert the space for filler1 and filler2?
Edited by: Siong Chao on Oct 4, 2011 4:56 AM
Edited by: Siong Chao on Oct 4, 2011 8:27 AM
Edited by: Siong Chao on Oct 4, 2011 8:29 AM

problem lies in the open dataset codes
Used:
open dataset out_file for output in text mode encoding non-unicode message msg.
if sy-subrc= 0.
loop at my_table.
transfer my_table to out_file
transfer cl_abap_char_utilities=>newline to out_file no end of line.
endloop.

How to change the lengths of the layout

Hi ,
I am executing one report, output is coming fine but next if i go to print preview for PO number only 9 digits are appearing one digit is missing, actually column is trucated, there in print preview there is one tab called Change Layout, there if i see length of the PO no is 9, so its showing only 9 digits, actually length of the PO no should be 10.in change layout the length is editable i can change from 9 to 10, after that there is a button called copy, then it will show correctly, it works only one time, so each and every time user has to change the length, so can any one suggest how to change that length in the layout permanently, bcos there is no save button there.
Can any one tell me from where all these lengths are coming which are appearing in change layout.Surely its not coming from the report.

Hi friend,
That depends upon the space provided by the ALV column for that variable or the heading size its not based on the data element size.
If you want to be more clear lust count the space available for each field available at the print preview.
The details for that are stored in table T180S just see the documentation available for that table.
And see when the table is getting filled like that so that you will be able to find a solution where and how it is getting populated.
Use column width optimization for getting the correct output.
If you have any queries in this please revert back to me i will help you.
Thanks,
Sri Hari
Edited by: srihari.kumar on Jan 5, 2012 4:01 PM

How to increase the length of the subject line in email using FM

Hi
we have maintained 50 characters for the subject line initially, but some subjects are having more than 50 characters. how can we increase the length of the subject line in email.
urgent.
points will be rewarded generousely.

Hi Rana,
In this case, you have to create a user defined field of required length under Journal Transactions Header to fill the data.
Regards,
Vijay Kumar
SAP Business One Forums Team

How to increase the length of the identifier?

I want to create a table with a column name as:
"domainnameregistrationassistance"
oracle 9i does not allow me to do this.
as the identifier length is fixed to 30 characters.
how do i increase the length of the identifier?
any help on this will be great!

Don't forget that there is a comment space for each table
and column, so calling the column DNR_ASSIST doesnt
revent you from doing ...
COMMENT ON TABLE M_SCHEMA.DNR_ASSIST IS '
Domain Name Registration Assistance';

How to fix the length of the output file

hi,
I have 1000 records in my source table which need to be inserted into file. But the length of the rows in my file should be only 500 i.e there should be two files getting created for this 1000 records i.e my each output file should contain only 500 rows not more than that.
Depending on the number of records present in the source, the file getting created will be varying as my file should contain only 500 rows each. for ex: if 5000 rows are present then 10 files need to be created.
How this can be achieved in ODI.
Thanks in advance

I believe this can achieved using jython easily .
Here is a sample output code
Command on Source - Select database Technology and required logical schema
Command on Target - Jython
import java.sql as sql
import java.io as io
import string,re
import java.lang as lang
import java.text as text
myCon = odiRef.getJDBCConnection("SRC")
myStmt = myCon.createStatement()
my_query="SELECT * FROM SCHEMA.TABLE_NAME "
file_count=1
i=1
myRs = myStmt.executeQuery(my_query)
writer=io.BufferedWriter(io.OutputStreamWriter(io.FileOutputStream('c:\\FILE_'+str(file_count)+'.csv')))
md=myRs.getMetaData()
collect=[]
while (i<= md.getColumnCount()):
    collect.append(md.getColumnName(i))
    i+=1
header=','.join(map(string.strip,collect))
#writer.write(header+'\n')
myRs = myStmt.executeQuery(my_query)
md=myRs.getMetaData()
myRs.setFetchSize(5000)
i=0
while (myRs.next()):
    j=1
    col=[]
    while (j<= md.getColumnCount()):
        col_type=md.getColumnTypeName(j)
        col_name = myRs.getString(md.getColumnName(j))
        if col_name is None:
            col_name= ''
        col.append(col_name)
        j+= 1
    data=','.join(map(string.strip,col))
    writer.write(data+'\n')
    #print data+ '\n'
    i +=1
    if (i == 500):
        writer.flush()
        writer.close()
        file_count +=1
        writer=io.BufferedWriter(io.OutputStreamWriter(io.FileOutputStream('c:\\FILE_'+str(file_count)+'.csv')))
        i=0
writer.flush()
writer.close()
myCon.close()Please run this code and let me know if you need any other help or modification to get your desired results.

How to set a song in the playlist to be phone ringtone

how to set my song in the playlist to be my ringtone

you have to convert it to a ringtone first. searching google will give you many ways to do it. also, there are some ringtone apps with pros and cons to each one. you cannot just pick a song on your phone and make it a ringtone unfourtunately.

How to set a cookie in the browser from an html page called via an Iview

How to set a cookie in the browser from an html page called via an Iview
Hello all,
I have an issue which is causing problems. I have a snap survey (html form with submit and cookie setting) which is embedded in a url iview.
Although the submit and the form work fine, the portal will not allow the cookie to be set it seems.
Is there a way to allow cookies to be set from an embedded page in a url iview??
You will make my day if you know!
System: EP7 SP13
Kind regards
Alex

Hi,
Check this:
http://www.oracle.com/technology/products/ias/portal/html/same_cookie_domain_with_pdkv2.html
Cookie Basics
Web browsers have built in rules for receiving and sending cookies. When a browser makes a request to a web server and the web server returns cookies with the response, the browser will only accept a cookie if the domain associated with the cookie matches that of the original request. Similarly, when a browser makes a subsequent request, it will only send those cookies whose domain matches that of the target web server.
These rules are designed to ensure that information encoded in cookies is only "seen" by the web server(s) that the originator of the cookie intended. These rules also ensure that the cookie cannot be corrupted or imitated by another server. By default, the domain associated with a cookie exactly matches that of the server that created it. However, it is possible to modify the domain at the time the cookie is created. Relaxing the cookie domain increases the scope of the cookie's visibility making it available to a wider "audience" of web servers.
For example, if a cookie is created by a.us.oracle.com, it's domain will usually be set to a.us.oracle.com. This means that the browser will only send the cookie to a.us.oracle.com. It will never send it to any other servers. However, if at the time of creation, the domain of the cookie is set to .us.oracle.com, the browser will send the cookie to any server whose domain falls within .us.oracle.com. such as portal.us.oracle.com, provider.us.oracle.com, app.us.oracle.com etc
Regards,
Praveen Gudapati

TS4006 how to set a tracking from the computer if someone stolen the ipod

how to set a tracking from the computer if someone stolen the ipod

Welcome to the Apple Community.
You can only locate your device when it is logged into iCloud and 'Find My Phone' is enabled, additionally the device will need to be switched on and connected to a wifi or cellular network.
Unfortunately, you cannot activate iCloud or 'Find My Phone' remotely.

How can I know the length of the image data section of a PSD file

I'm a C++ programmer developing a project to parse PSD files, and it's necessary to know whether there is a length field indicating the length of the image data in image data section of a PSD file, if not, how can I know the length?
Thank you.

Sorry I can't help, maybe there is some information in the SDK?
http://www.adobe.com/devnet/photoshop/sdk.html
Or someone might be able to help in this forum?
http://forums.adobe.com/community/photoshop/photoshop_sdk

How to set Where clause in the View Object of the MessageChoice ?

Hi,
How to set Where clause in the View Object of the
MessageChoice ?
Example:
<bc4j:rootAppModuleDef name="EdEscolaCampusView1AppModule"
definition="ed00050.Ed00050Module"
releaseMode="stateful" >
<bc4j:viewObjectDef name="EdEscolaCampusView1" >
<bc4j:rowDef name="CreateEdEscolaCampusView1" autoCreate="true" >
<bc4j:propertyKey name="key" />
</bc4j:rowDef>
</bc4j:viewObjectDef>
<bc4j:viewObjectDef name="ListaTipLocalView1"
rangeSize="9999">
</bc4j:viewObjectDef>
</bc4j:rootAppModuleDef>
</bc4j:registryDef>
messageChoice declaration:
<bc4j:messageChoice name="SeqTipoLocalCampus"
attrName="SeqTipoLocalCampus"
prompt="Local do Campus">
<contents>
<bc4j:optionList attrName="SeqTipoBasico"
textAttrName="NomTipoBasico"
voName="ListaTipLocalView1"/>
</contents>
</bc4j:messageChoice>
I would like set where clause of ViewObject, with dinamic parameters (using attribute1 = :1), before populate messageChoice.
thanks...
Danilo

Hi Andy,
I try set a where clause using the message:
Set where Clause parameter using UIX , but my UIX Page have 2 messageChoice's of different ViewObject's, then I need implement this Java Class:
//Nome da Package da Tela Detail
package br.com.siadem.siaed.ed00050;
// Importa as Bibliotecas necessárias
import oracle.jbo.ViewObject;
import oracle.jbo.ApplicationModule;
import oracle.jbo.client.Configuration;
import oracle.cabo.servlet.BajaContext;
import oracle.cabo.servlet.Page;
import oracle.cabo.servlet.event.PageEvent;
import oracle.cabo.servlet.event.EventResult;
import oracle.cabo.data.jbo.servlet.bind.*;
import oracle.cabo.ui.data.BoundValue;
import oracle.cabo.ui.data.DataBoundValue;
import javax.servlet.http.HttpServletRequest;
import br.com.siadem.siaed.util.*;
import javax.servlet.http.Cookie;
import oracle.cabo.data.jbo.def.NestedAppModuleDef;
import oracle.cabo.data.jbo.def.ViewObjectDef;
import oracle.cabo.data.jbo.def.AppModuleDef;
// Classe que configura os parametros para a execução da Query,
// utilizando variáveis de Sessao
public class FunPreQueryLista
public static EventResult FunConfiguraQuery(BajaContext context, Page page, PageEvent event) throws Throwable
// TrataDadosSessao - Classe utilizada para retornar os valores das variáveis de sessão genéricas
// Ex: CodCliente, CodMunicipio etc...
TrataDadosSessao varDadosSessao = new TrataDadosSessao();
// 1o. Parametro Configurado - Através da classe TrataDadosSessao, utilizando um método Get
// <alterar>
String valor1 = varDadosSessao.getCodCliente();
String valor2 = varDadosSessao.getCodMunicipio();
//Cria o objeto que retorna o ApplicationModule
ApplicationModule am = ServletBindingUtils.getApplicationModule(context);
// Início das Configurações da Query da Lista
//Cria o objeto que retorna o view object da lista desejada
//alterar
ViewObject TipoLocal = am.findViewObject("ListaTipoLocalView1");
//Configuração dos parametros definidos na query do view Object
//alterar
TipoLocal.setWhereClauseParam(0,valor1);
TipoLocal.setWhereClauseParam(1,valor2);
// Executa a Query
TipoLocal.executeQuery();
// Fim das Configurações da Query da Lista
// Início das Configurações da Query da Lista
//Cria o objeto que retorna o view object da lista desejada
//alterar
ViewObject TipoDestLixo = am.findViewObject("ListaDestinoLixoView1");
//Configuração dos parametros definidos na query do view Object
//alterar
TipoDestLixo.setWhereClauseParam(0,valor1);
TipoDestLixo.setWhereClauseParam(1,valor2);
// Executa a Query
TipoDestLixo.executeQuery();
// Fim das Configurações da Query da Lista
// Retorna o Resultado para a Página
return new EventResult(page);
The code works very well...
And, I'm sorry for my two repost's in UIX Forum about this in a few time.
Thank very much...
Danilo

How to set default values on the screen painter parameters?

Hello ABAP Gurus,
I would just want to ask how to set default values on the screen painter parameters.
Thank you for your replies.

Hi,
To set default values for screen painter parameters initialize the field names with default values in the PBO module....
say u have the field name as f_field1....
in the PBO of that screen initialize it....
f_field1 = '100' "here 100 is the default value.
<b>reward points if useful.</b>
regards,
Vinod Samuel.

How to set the length of the reverb? (GarageBand)

Similar Messages

Maybe you are looking for