How to set the view of a table to the last column?

Hi all,
I have a table that allows user to add rows to it. When the number of columns exceed the number of row the viewport can display, the freshest columns are not in the view.
My question is, how do I force the viewport to view the last rows of the table as the table grows? Instead of just showing the starting rows?

You're mixing columns and rows in your problem description, but
something like the following should be close
Rectangle rect = new Rectangle( table.getWidth()-1, table.getHeight()-1, 1, 1);
table.scrollRectToVisible( rect );: jay

Similar Messages

  • How to hide the view latest instance option for the reports in XIR3

    Created an access level and denied the rights "view document instances" and "view document instances that the user owns" in the access level.
    Applied this access level for a particular group on a particular folder.
    Login to Infoview and when view the history,there are no instances for a particular report under that folder.
    But we could still see the 'View Latest instance' option in the properties of the report and when click on it,we are able to view the report.
    As per the security assigned,the user should only be able to view the instances owned by him.
    Plz help me how to hide the option in INFOVIEW

    In 9.3.1 (not sure about 9.2) there is a table in your BIPlus repository which stores preferences/profile information, however, having a user simply log in to WA doesn't appear to automatically create a row for them in this table. (So this may not be a viable solution to your situation, I'm still looking for one myself.) This table stores lots of preference info such as whether or not to show the Main Menu, Toolbar, Masthead, etc. by default.
    To hide the View Pane, edit the data in the SHOW_INFO_PANEL column, change it from a 1 to a 0 and for that user the View Pane will not longer appear by default.
    HYA_USER_PREFS
    But again, this only works if you already see the user in the table otherwise I guess maybe they have to 'touch' their Preference before it creates an entry in that table. Haven't figured that part out yet, and Support didn't have any information.
    If anyone has found a way to maneuver through the table structures I'd love to hear any insight you can offer.
    Before you make any changes to the data in this table be sure to take adequate repository backups, and use caution as usual.
    I'm going to create a Shared Preference and have each user point to it the first time they log in - but then you lose the ability for each user to have their own personal folder as their default, so it's still not the ideal solution. Really wish there was a way for Admins to set certain prefs. A coworker reminded me under 7.? or 6.x things like View Pane were system-level settings which was easy to control, but now it's at the user level.
    Good luck,
    Karen

  • How to set field alignment in a table in jdev 11.1.2.3?

    hi,
    How to set field alignment in a table in jdev 11.1.2.3?
    eg: to diplay a number field in a table as right aligned.
    I have tried to set field(amount) VO UI Hint Format Type:Number; Format: 0000.00
    and jspx as flowing, but it doesnot work.
    Thanks.
    bao
    <af:column sortProperty="#{bindings.VO1.hints.Amount.name}"
    sortable="true"
    headerText="#{bindings.VO1.hints.Amount.label}"
    id="c44" width="60"
    align="center">
    <af:inputText value="#{row.bindings.Amount.inputValue}"
    label="#{bindings.VO1.hints.Amount.label}"
    required="#{bindings.VO1.hints.Amount.mandatory}"
    columns="#{bindings.VO1.hints.Amount.displayWidth}"
    maximumLength="#{bindings.VO1.hints.Amount.precision}"
    shortDesc="#{bindings.VO1.hints.Amount.tooltip}"
    id="it58"
    secret="false"
    inlineStyle="text-decoration:overline;">
    <f:validator binding="#{row.bindings.Amount.validator}"/>
    </af:inputText>
    </af:column>

    Works for me:
            <af:column sortProperty="#{bindings.EmployeesView1.hints.Salary.name}" sortable="false"
                       headerText="#{bindings.EmployeesView1.hints.Salary.label}" id="c7" align="right">
              <af:inputText value="#{row.bindings.Salary.inputValue}" label="#{bindings.EmployeesView1.hints.Salary.label}"
                            required="#{bindings.EmployeesView1.hints.Salary.mandatory}"
                            columns="#{bindings.EmployeesView1.hints.Salary.displayWidth}"
                            maximumLength="#{bindings.EmployeesView1.hints.Salary.precision}"
                            shortDesc="#{bindings.EmployeesView1.hints.Salary.tooltip}" id="it6">
                <f:validator binding="#{row.bindings.Salary.validator}"/>
              </af:inputText>
            </af:column>JDeveloper 11.1.2.3
    Salary is shown right-aligned.
    What happens if you get rid of your inlineStyle on the af:inputText

  • How to set DDL lock for a table

    OCI,how to set DDL lock for a table?

    Oracle acquires a dictionary lock automatically on behalf of any DDL transaction requiring it. Users cannot explicitly request DDL locks. Only individual schema objects that are modified or referenced are locked during DDL operations. The whole data dictionary is never locked
    DDL locks fall into three categories: exclusive DDL locks, share DDL locks, and breakable parse locks.
    see this link
    http://www.sc.ehu.es/siwebso/KZCC/Oracle_10g_Documentacion/server.101/b10743/consist.htm#i5281

  • How to set default value of a table using sequence number

    Dear all,
    Does any body know that how to set default value of a table
    using sequence number.
    But I don't want to use trigger to do that.
    Please help!!!!
    Eldon

    Andrew is essentially correct. You can get around the trigger,
    but not the sequence, if (and this may be a very big if) you can
    guarantee that every time an insert is done into the table, from
    whatever source, the statement looks something like
    INSERT INTO tbl VALUES (sequence.nextval,other_columns_values)

  • How can i convert the data from mutiple-table to the other database(MSSQL)?

    Dears,
    How can i convert the data from mutiple-table to the other database such as MS-SQL?
    I have a third party system based on MS-SQL 2000.
    Now we want to make a integration between SAP R/3(Oracle) and SQL server.
    When my user releases the purchase order in R/3, the application we coded will convert the releated data to the temp database on the SQL server.
    But i don't know which tools will help me reach the purpose.  BAPI, LSMW, IDoc... ???
    Would anybody tell me which way is better and how to do?
    Thanks a lot!
    Kevin Wang

    Hello Kevin,
    The question to use which method depend on your detail requirements. If you use BAPI, you need to find which Bapi can provide the data you want. Bapi normally use as a function called by external system. So you need to develop an external program like VB/Java to call this Bapi and move it to SQL. LSMW is use when you want to upload data from an external system to SAP. So it does not serve your requirement. Idoc can be use to export data to an external system. Again like Bapi, you need to find what Idoc can provide the data you want. However, it does not any programming from the external system. If I were you, based on your requirements, I think writing an Abap program that read the data you want and download it to NT/SQL server will be faster and easier.

  • How to set up an automatic upper case at the begining of a sentence

    Can someone help me if or how to set up an automatic upper case at the beggining of each sentence. I am doing huge amount of writing and just got fed up with it.

    What application? Pages? If so, that option (and many others) is not available in the current version. You can use the previous version which should be in your application folder. Or you can do what I finally did and use Open Office or Libre Office.

  • How do I get the viewer in imovie to reflect the correct orientation of the video?

    I have a video that I've taken with my iphone 4s which plays with the correct orientation in quicktime. When I import it into imovie '08, the event thumbnails reflect the correct orientation as well but for some reason the preview shown in the viewer is upside and if I export it, the output is upside down. I've attached a screenshot so everyone can see exactly what I'm talking about. Now if I rotate the clip so that the thumbnails appear upside down, the viewer shows the correct orientation, but that isn't really a solution. Also, I should mention that this is a fresh install of imovie. Any help would be much appreciated!

    I definitely appreciate the response. I'm aware of how to rotate the clip as a workaround, but simply rotating the clip so that the clip itself appears upside down and the viewer output looks right side up doesn't really fix the underlying problem. In the past whenever I've used imovie, the viewer reflects the orientation of the event/project thumbnails instead of being the opposite orientation. Any thoughts on why the viewer wouldn't be reflecting the same orientation as the clip?

  • How can i put view All in bottom of the grid view?

    Hi All,
    I have created a sharepoint document library and uploaded documents to that library.
    After that i have bind that documents to gridview, now i want put view All in the bottom of the documents.
    View All---> if i click this, it will navigate to that sharepoint library.
    How can i put view All in bottom of the grid view.

    Hi Anil,
    You can add a button or hyperlink and initialize the redirect url with default view url of list as "oList.DefaultView.Url".
    Best Regards,
    Brij K
    Best Regards,
    Brij K
    http://bloggerbrij.blogspot.co.uk/

  • How to set focus programmatically in a table ?

    Sir,
    How to set focus programmatically in a table using javascript?
    Is it document.getElementById('form1:table1:i:column1').focus(); ?
    Thanks
    Stephen

    Repost

  • How do I remove the tempature readings on my calendar? They fill up each day crowding out the view of scheduled events for the most part.

    How do I remove the tempature readings on my calendar? They fill up each day crowding out the view of scheduled events for the most part.
    Thank you
    Terry

    Disable or remoce the Calendar, that is creating these events, Terry.
    To find out, which calendar is creating these events, ctrl-click on one of the events and select "Get Info".
    In the Info panel click the color icon in the upper right corner to find out the calendar, that created this event.
    Then reveal the "Calendars" Sidebar (press the "Calendars" button in the toolbar) and select the Calendar, ctrl-click it and delete the calendar or disable it.
    -- Léonie

  • How do I duplicate or copy a table onto the same page?

    In Pages, how do I duplicate or copy a table onto the same page?

    option drag duplicates anything or copy and paste
    Peter

  • Newbie ques : How to get the list of all tables in the database

    Hi,
    I'm very new to Oracle (using Oracle8i currently). I wanted to know if there is a way to get the list of all tables in the database. Like in mySQL you can use the command " show tables" to get the list of all the tables.
    Any help will e greatly appreciated. Please "cc" any reply to [email protected] also.
    thanks
    Deven

    Hi
    Select table_name, owner from all_tables;
    will give u all the tables in the database.
    all_tables, dba_tables, user_tables
    all_objects, dba_objects, dba_objects
    there are many, more tables. login as system and query the tab and try to describe the tables.
    Thanks
    Malar

  • Prevent user from the view on demand connection in the desinger but not XI

    When I give an user/group view on demand access to a connection (universe connection), they can refresh the webi report sucessfully. But this also opens up the connection in the designer for the user/group. This might allow them to build additional universe based on various tables the connection may have access to.
    How do I prevent an user seeing/using the view on demand connection in the desinger?

    HI
    Can we try this?
    Open java administration launchpad.
    Select Business Objects enterprise Applications.
    Select "Designer"
    It will show the rights for the group\user, place the cursor and click advanced under "net access"
    The advanced right windows open expand "Designer" and find Create,Modify,Or delete connections
    Set the right to "Explicitly denied" .Apply ok
    The new and edit buttons will now be grayed out for the particular user\group.
    Hope this will help
    Regards
    Kultar

  • I want to get the data of a table inside the Form but it is not passed

    I want to get the data of a table inside the Form but it is not passed to the form by tables parameters.
    How can I do this.
    Regards

    If there is a problem with defining it globaly, you can define a field symbol globably and point to it. For example.  It would probably be better to define your table globably.
    report zrich_0003 .
    field-symbols: <imarc> type marc_upl_tt.
    start-of-selection.
      perform get_data.
    *       FORM get_data                                                 *
    form get_data.
      data: imarc type table of marc with header line.
      select * from marc into table imarc up to 10 rows.
      assign imarc[] to <imarc>.
      perform write_data.
    endform.
    *       FORM write_data                                               *
    form write_data.
      data: xmarc type marc.
      loop at <imarc> into xmarc.
        write: / xmarc-matnr, xmarc-werks.
      endloop.
    endform.
    Regards,
    Rich Heilman

Maybe you are looking for

  • Music pauses for a second

    When I have music playing and I either click the lock button or enter or exit the Music app, the music will stop playing for a second, then start again. This isn't a problem per se, but it is rather annoying. It hadn't done this with iOS 3.

  • Sales Order Creation using LSMW-BAPI.

    Hai,      While executing a 14th step in LSMW-BAPI,the IDOC is generated.While Testing the IDoc the values for the Header segment alone is displayed.The Segment sfor Item is not Displayed.Should there be any link between Header & the ITem. Regards, P

  • Namespace prefix in Root element missing during variable assignment

    In bpel 10.1.3.4, I need qualified element Namespaces in one of the target variables. I have an xsd that has elementFormDefault = "qualified" set, therefore all elements being referred to would have the namespace prefixed. This is working for all chi

  • How much time taken to responde on client by DCs/GCs

    Hi how can i get the answer of below question which asked by clients. 1: Time taken by AD to respond back on authentication request. 2: Time taken after user request submission to application related sub service to request served by the application 3

  • How to select alt. recipe

    Hi there are 2 recipe's for a material , whenever Process order created system automatically assign            recipe group X,  but  i want to change another group (Y) during process order release. How to do? which setting drive's the automatic assig