How to set travel time for after a meeting?

Hi,
I hope you can help solve this problem...
Scenario: I have to go to a meeting and come back again.
Problem: In the Calendar application I can set the travel time for before a meeting but there is seemingly no functionality to set the travel time for after a meeting. Hopefully it hasn't escaped all those fantastic developers that people have to travel back from a meeting as well as travel to it?
Question: How do I set the travel time in an event for travelling back after a meeting? I would like to avoid the kind of solution where I have to create another separate event just after the meeting event and call it 'travel time'.
Hope you guys can help...
Thanks
Clown Guy

first make a Locale object as
public Locale(String language,
String country)
Construct a locale from language, country. NOTE: ISO 639 is not a stable standard; some of the language codes it defines (specifically iw, ji, and in) have changed. This constructor accepts both the old codes (iw, ji, and in) and the new codes (he, yi, and id), but all other API on Locale will return only the OLD codes.
Parameters:
language - lowercase two-letter ISO-639 code.
country - uppercase two-letter ISO-3166 code.
Throws:
NullPointerException - thrown if either argument is null.
and then use following method.
public SimpleDateFormat(String pattern,
Locale locale)
Constructs a SimpleDateFormat using the given pattern and the default date format symbols for the given locale. Note: This constructor may not support all locales. For full coverage, use the factory methods in the DateFormat class.
Parameters:
pattern - the pattern describing the date and time format
locale - the locale whose date format symbols should be used

Similar Messages

How to set expiry time for cached Subjects of authenticated proxy service.

How to set expiry time for cached Subjects of authenticated proxy service in message level authentication.
Because of this, password change does not effect immediatly in proxy invocation.
I'm using Weblogic 10.3 and OSB3.0

Hi,
You can activate Time-Dependent Publishing Service on your XML form and once the Lifetime of Documents is over then the document is not visible to users.
http://help.sap.com/saphelp_nw2004s/helpdata/en/c1/c87d3cf8ff3934e10000000a11405a/frameset.htm
It is only invisible but not deleted!
So to delete all expired XML Forms you should run Scheduler Tasks for Time-Dependent Publishing:
<b>TimeBasePublishingUnpublish</b>
http://help.sap.com/saphelp_nw2004s/helpdata/en/3a/bc37b5789dee4eaa8005bff84f14cf/frameset.htm
You can also create your own Scheduler Task which deletes/archieves all expired XML Forms.
Greetings,
Praveen Gudapati
[Points are welcome for helpful answers]

How to set default time for appointment

When I had snow leopard, the default time for length of an appointment was one hour. I upgraded to Lion and now the default time is many hours. Can't seem to find the area to change the default. Keith

Hello User,
Check this:-
Sasi Nagireddy: How to Set Default Time Zone for all Users in OBIEE?
Thanks,
Sasi Nagireddy..

How to set-up Time Machine after Restore

After having restored an entire system back from Time Machine, it looks to me as Time Machines wants to completely backup all data already held on the hard-disk. With this effect, the harddisk is not big enough. I do not want to buy another disk. Is there any way how to persuade Time Machine that it should use the existing data on the disk?

Hi Aulia,
I don't believe that you will be able to have Time Machine understand that you only want it to continue with the same data : once it has detected that a file changed, it makes another copy, even if you know that it's the same file : it's based on messages telling it that a file has changed, not on files comparison.
I think that the "inprogress" file will be replaced by another one if you let TM do it's job : it won't make a third copy of your data. If there is enough space on the disk, you can let TM continue, and try to manage with the following trick, with patience and much care.
Make sure that the "Action" menu is visible in a Finder's window (it is if you did not customize the toolbar to remove it), and dive into Time Machine. Select a item in the window : the Action menu now has an item that should read "delete all backups of this element" (or something like that : I'm translating my French version). Take care that "all" here really means ALL versions in the backup : the only copy left would be on your main disk.
The next backup may not make a fresh copy unless you help it a little : after all, there was no message telling TM that the original was changed, since it was not ! Just do anything in the folder containing the item that you deleted from the backup (like creating and immediately deleting a folder there) : this will tell TM that something has happened there, the next backup will check the folder, detect the missing element and make a fresh copy.
Having only one copy of a really important folder may not suit you, even if it's only for the short delay until the next backup. You can make a copy of it, and run TM to backup the copy (a right click on the icon in the dock shows a "backup now" item). You now have a backed up version, you can delete the original, and all the backup copies of the original with the previous method. But if you rename the copy back to it's original name, it will be saved again... just iterate one more time !
I hope that this can help you, but please do not hesitate to try and validate your method on small copies before you delete something in your backup !
PS : I just tested my proposals with my 33Gb iMovie Events folder : a new copy of an event folder is created in the backup each time you rename an event, and I gained more than 40 Gb by deleting all previous redundant versions.
At least, it works for me !

How to set delay time in tooltiptext

Hai,
I'm developing desktop application by using SWINGs in that app there in some text fields for that i have written mouseEntered method.
in that method i used tooltiptext. It working properly. I need it to display message upto mouseout from text field.
so any one could please help me how to set delay time for the tooltiptext.

Read the API for avax.swing.ToolTipManager. Also, you don't need to use a MouseListener, just call setToolTipText or override getToolTipText.
db

How do you set the time for this forum??? Not in nerd pleas

how do you set the time for this forum?

There were problems with the correct time display for postings, and based on another recent post this doesn't seem to have been fixed. My advice... don't worry about it.

How to set up time capsule with BT Infinity

how to set up time capsule with BT Infinity

The easiest and sure way is to use bridge on the TC as the method of connection. The TC then becomes a device in your network and gets its IP from the main router that I presume BT supply.
Method is,
1. Plug the TC WAN port into the BT supplied modem by ethernet.
2. Plug the computer you are using for the setup into the TC by ethernet.
3. Run the airport utility .. go to internet tab on the top menu..
In the bottom option, Connection Sharing choose off (bridged mode)
4. Go to the wireless page and setup wireless connection as you like it.. using whichever band you want. And make sure security is set to the highest setting, wpa2 personal. Put in a decent wireless passkey.
5. Press the update and fix whatever else the TC will show as needing fixing.. usually security stuff.
6. You can then disconnect the ethernet and connect by wireless if you want. Any port on the TC will now be a LAN port, including WAN.
This is assuming BT supply a wireless router with built in vdsl/other type of modem. If so you normally will not be able to bridge the modem, unless BT are using pppoe authentication which they haven't in the past.
If you really need to use the TC as a router then you will need to work out an alternative method. You can double NAT by placing the TC in the DMZ of the BT router if that is an option. It is not without issues in general.

How to set background color for selected days in DateChooser

How to set background color for selected days. I created
checkbox for each day [Son,Mon,Tue,Wed,Thu,Fri,Sat] and a
DateChooser, I want to change the background color for the selected
day when i click on a button after selecting the desired checkboxs
[ monthly wise/yearly wise]
Thanks in advance

There is no button involved in the following code, but it may
be of use to you:
<?xml version="1.0"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
creationComplete="init()">
<mx:Script>
<![CDATA[
private var origColor:uint;
private function init():void {
origColor = dc.getStyle("selectionColor");
public function setBackGrdColors(newColor:uint):void {
dc.setStyle("selectionColor", origColor);
if(dc.selectedDate){
var dayOfWeek:Number = dc.selectedDate.day;
else{
return;
switch(dayOfWeek) {
case 0:
if(sun.selected)
dc.setStyle("selectionColor", newColor);
break;
case 1:
if(mon.selected)
dc.setStyle("selectionColor", newColor);
break;
case 2:
if(tue.selected)
dc.setStyle("selectionColor", newColor);
break;
case 3:
if(wed.selected)
dc.setStyle("selectionColor", newColor);
break;
case 4:
if(thu.selected)
dc.setStyle("selectionColor", newColor);
break;
case 5:
if(fri.selected)
dc.setStyle("selectionColor", newColor);
break;
case 6:
if(sat.selected)
dc.setStyle("selectionColor", newColor);
break;
default:
break;
]]>
</mx:Script>
<mx:VBox horizontalAlign="center" verticalGap="20">
<mx:DateChooser id="dc" textAlign="left"
change="setBackGrdColors(cellColor.selectedColor)"/>
<mx:HBox width="100%" horizontalAlign="center">
<mx:CheckBox id="sun" label="Sun"/>
<mx:CheckBox id="mon" label="Mon"/>
<mx:CheckBox id="tue" label="Tue"/>
<mx:CheckBox id="wed" label="Wed"/>
</mx:HBox>
<mx:HBox width="100%" horizontalAlign="center">
<mx:CheckBox id="thu" label="Thu"/>
<mx:CheckBox id="fri" label="Fri"/>
<mx:CheckBox id="sat" label="Sat"/>
</mx:HBox>
<mx:HBox width="300" horizontalAlign="center">
<mx:Label text="Background Color" />
<mx:ColorPicker id="cellColor"
selectedColor="#FF00FF"/>
</mx:HBox>
</mx:VBox>
</mx:Application>

How to set current time ?

Hi,
I am in eastern time zone and my Apex sysdate shows EST. However the date picker shows four hours ahead (GMT) . The reason I found is the current_time stamp set to 00:00 instead of -04:00. (DBTIMEZONE) . Our DBA does not know much about APEX . When I made qurries about time zone and time stamp at SQL Commonds, the results are as follow:
select SESSIONTIMEZONE from dual;
SESSIONTIMEZONE
+00:00
select current_timestamp,systimestamp, localtimestamp from dual
CURRENT_TIMESTAMP SYSTIMESTAMP LOCALTIMESTAMP
10-AUG-07 01.07.40.740216 PM +00:00 10-AUG-07 09.07.40.740199 AM -04:00 10-AUG-07 01.07.40.740216 PM
when I tried the following statement,
alter session set time_zone= '-4:00';
I got
Statement processed.
but no thing has been changed.
The question is how to set the time so that in the date picker with time It will show me the correct default time. Right now it is showing four hours ahead.
Thanks for the help.

Hi Adnan,
Convert is from date to string :
String bldate=item.getBilling_Date();
                                                  String byy=bldate.substring(0,4);
                                                  String bmm=bldate.substring(4,6);
                                                  String bdd=bldate.substring(6,8);
                                                  String bdate=byy+"-"+bmm+"-"+bdd;
                                                  java.sql.Date bildate=java.sql.Date.valueOf(bdate);
elem1.setBilling_Date(bildate);
Regards
Khushboo

How to set Legislation rule for Enhanced Retro

how to set Legislation rule for Enhanced Retro
How can i setup Enhanced Retro for Global HR International.
Iam implementing HR/Payroll on latest 12i. I am using HR International.
when i execute the following query , there is no records
select * from pay_legislation_rules
where rule_type like '%ADVANCED%RETRO%'
and legislation_code = 'IQ'
I have created events, event groups, enable dynamic triggers for my business group and legislation(IQ) and enter the corresponding event group and retro element in the Element screen(retro component).
And i update one allowance in the back period , and I found one row has been inserted in pay_process_events table. But i am not able to run enhanced Retro Notification report and not able to find any Enhanced Retro concurrent request.
Any one have any idea?
thanks,

There are no specific concurrent programs for Enhanced/Advanced retropay. The old ones still do, and derive under the hood the method of retropay.
I do not recall by hard the setting to activate enhanced retro (but it is a legislation rule), but it should show already in the element type screen. If you have the retro tab in the screen, and first you have to specify the method (Adjustment, ...) before specifying the retro element type (and time span), then you know that enhanced retro is configured correctly.

39L4363D - Unable to set padding time for recording start and end time

Hello,
I have a problem with my 39L4363DG tv (Software 7.1.90.34.01.1).
I'm not able the set padding time for recording start and/or end time as described in the [manual|http://www.toshiba-om.net/LCD/PDF/English/L4363-323950-English.pdf] on page 51. Both menu item "start padding time" and "end padding time" are disabled?
Can anyone help me and give me an advice on how to solve it?

Hi
The padding time can be set for programmed recording.
There is also an scheduling priority
If scheduled time slots are next to each other and there is more than one minute between the end time of the first schedule and the start time of the next schedule, programmed recording will be performed correctly.
When +Start Padding Time+ and +End Padding Time+ are set, the start time and end time will be the time plus the additional minutes.
If scheduling times overlap, priority will be given to the programmed recording which starts first.
When the programmed recording that started first ends, recording will switch to the next scheduled programme.
At this time, depending on how far the scheduling times overlap, the beginning section of the next scheduled programme may not be recorded.

How to set snooze time

Hi ,
Please let us know how to set snooze time to 5 mintues in Iphone5. At present it is having snooze interval of 10 minutues.
We are able to see Snooze off / on but i need to reduce snooze time from 10 minutes to 5 minutes.
Appreciate your valuable inputs.
Thanks

It says in the User guide about the snooze:
"Don't want to get up just yet? When an alarm sounds, you can snooze the alarm. This pauses the alarm for a predefined length of time.
When the alarm sounds, select snooze."
My question is how can I do the predefining? It is now 10 minutes and I would like to make it shorter.
Another question was, if I can define the alarm volume separately from the other sounds of the phone? How can I set the phone mute for sleeping time, and still use the alarm to wake upp?

How to set capital letter automatically after enter.. during email

how to set capital letter automatically after enter.. during email
as it defaults to lower case all the time.. just like above
However would like to know how to change so its like the H in the word However automaticlly
thanks.

thanks.
i tried this..
in transformations the three options are in ghost txt.. not bold.
tried them all.. and no change..

Setting Idle Time for a session..

Hi,
Can you please help in setting idle time for a session using jsp.
Thanks,
Srini.

How to set the timeoutsecs for a session. We can set this parameter in weblogic.properties file. This is constant for all the users. But I want to give the sessionouttime depending on user. Please help me regarding this.

How to set Compatibility Mode for a single site in ie10

This question was originally posted on the Answers forum -
http://answers.microsoft.com/en-us/ie/forum/ie10-windows_7/how-to-set-compatibility-mode-for-a-single-site-in/187152e3-142a-4d96-8d1b-af82ef571eec
I am having problem with getting ie10 to set ie9 compatibility for a single site (sharepoint.contoso.com).
When I add this website in Compatibility View Settings (Alt > Tools > Compatibility View Settings > 'Add this Website') it adds the domain 'contoso.com' and not the individual website (sharepoint.contoso.com).
This cause other sites (www.contoso.com) to be configured to use compatibility mode. Because this is a separate site (different web server) to the site sharepoint.contoso.com (sharepoint 2010 server) we need different compatibility settings.
Using a different example to explain the issue -
Microsoft has three websites that are different websites created by different developers written in different programming languages and they only work with certain browsers.
microsoft.com (Website1 created by Developer1) - compatible with ie8/ie9/ie10
msdn.microsoft.com (Website2 created by Developer2) - compatible with ie8/ie9
technet.microsoft.com (Website3 website created by Developer3) - compatible only with ie10
The only thing the three website share is the URL contains 'microsoft.com'.
Marking 'msdn.microsoft.com' to run in compatibility mode affects the other 2 websites - mainly technet.microsoft.com which will not work now since it only runs in pure ie10 mode.
Should you be able to add an individual site to the compatibility list instead of all sites that have .microsoft.com in the URL? Am I missing a simple setting in the ie10?
As a workaround I am using the F12 Developer Tools to set the Browser Mode which temporary sets the compatibility mode. However this is not a nice solution to the end users at our organisation.

problem is not solved for non corporate environments...
You could start your own thread. Then if you got that answer and it was marked Answered you would have the ability to unmark it. The OP of this one seems satisfied. Also note that this is TechNet. Consumers can get help on Answers
forums.
Robert Aldwinckle
Oh! I wrote it wrong: I should have said: This is not solved for NON-AD environments. No demands what so ever to use Window 7/8 professional in a small corporation or on a big corporation with Island of smaller departments for example offshore.
The problem is that the thread is not "Answered" by the OP, its is marked answered by a moderator (and same moderator that did the answer) so no way of telling if the OP is satisfied.
But you are right in the fact that I am almost kidnapping the thread. But a complete answer would benefit all in this case I would presume.
Regards
/Aldus

How to set travel time for after a meeting?

Similar Messages

Maybe you are looking for