How to set-up change document object for deliveries??
Hi experts ,
kindly help me with this config , I did some researched and none of them have solve my problem.
i need to know on how to set-up a change document object for delivery documents.
Change document object LIEFERUNG is not available in transaction SWED.
How will I add this change document object in SWED?
hi ,
im wondering why even the existing object VERKBELEG is not being triggered?
would you know any reason for this?
Similar Messages
-
How to create the change document functionality for a dependent objects?
May I please know how to create the change document functionality for a dependent objects?
I have done it follow the same process as for business process objects. But when i try to test it in BOBT, there is no records under "FIELD_CHANGE_WITH_FILTER". It seems the change hasn't been recorded.
If the way I did to create change document for dependent object is correct, please also kindly advise the possibilities for why there is no record during testing.
thanks in advance.I also have some doubts about the business object.In this case,one abstract BO hase a subnode wihich is root extended.I added the change document for this node under the category "root_extended" and then tested the function in BOBT.I got some error message "can't find the root key".Shall i redefine the method /BOFU/IF_CDO_CREATION~IS_CDO_CREATION_ACTIVE so as to solve the problem?
Thx. -
Error in multiple operation with change document object for custom table
hi all,
I have developed a change document object for a custom table ZTEST and developed a report program for insertion, updation & deletion..everything works fine if I do only once ie. if I created only 1 entries. If I created 2 new entries , I am getting an Error "DUPREC:POS&Z3RL_TAB&Z3RL_TAB" and EXIT the transaction.
why I am getting this error??? is it not possible to do multiple operation with the change document???
kindly help.
Edited by: JaiKarthik on Apr 7, 2010 6:20 AMLOOP AT ts_mod INTO wa_mod.
READ TABLE <i_itab> INTO <wa_tab> INDEX wa_mod-row.
* Select the existing entries in table Z3RL for change history
SELECT SINGLE * FROM z3rl
INTO wa_z3rl
WHERE vkorg = <wa_tab>+3(4)
AND zzkunnr = <wa_tab>+7(10).
* Move the old entries
IF sy-subrc = 0.
CLEAR ls_z3rl.
ls_z3rl = wa_z3rl.
ENDIF.
* Update the table
MODIFY (viewname) FROM <wa_tab>.
CLEAR wa_z3rl.
wa_z3rl-mandt = <wa_tab>+0(3).
wa_z3rl-vkorg = <wa_tab>+3(4).
wa_z3rl-zzkunnr = <wa_tab>+7(10).
* Populate change tables
CLEAR wa_change.
wa_change-teilobjid = 'Z3RL'.
wa_change-textart = 'TEST_2'.
wa_change-textspr = 'EN'.
wa_change-updkz = 'U'.
APPEND wa_change TO ts_change.
*call the fM to log the values in CDHDR table.
CALL FUNCTION 'Z3RL_WRITE_DOCUMENT'
EXPORTING
objectid = 'Z3RL'
tcode = sy-tcode
utime = sy-uzeit
udate = sy-datum
username = sy-uname
planned_change_number = ' '
object_change_indicator = 'U'
planned_or_real_changes = 'U'
no_change_pointers = 'U'
upd_icdtxt_z3rl= 'U'
n_z3rl= wa_z3rl
o_z3rl = ls_z3rl
upd_z3rl= 'U'
lv_opt = ' '
TABLES
icdtxt_z3rl= ts_change.
CLEAR : wa_mod, <wa_tab>.
ENDLOOP.
Edited by: JaiKarthik on Apr 7, 2010 6:49 AM -
How to set bank change in environment for Yamaha S80
Hello,
i started to discover the environment in logic pro 9 after many years. Now i want to set up my external midi devices and have difficulties to adress all banks in my Yamaha s80. It must be customized, but I don't know how. I read the manual of logic pro 9 and the manual of the S80. I hope somebody can help me. Thanks in advance.To do this you will have to use either make use of portal or BSP application or Dynpro..
It is not possible for the user to change the password just from the web query -
How to use change document object ?
Friends,
I am learning to use the Change Document object for one of my Z table. I have created a change doc object using SCDO. I have now written a test report in which i am issuing the SELECT statement for fetching old and new values from the Z table and passing them to the FM generated by SCDO.
I am not able to see the changes in the CDHDR and CDPOS tables. I am doubtful abt the values being passed to the FM. Here are the values i am passing:
CALL FUNCTION 'YTEST_WRITE_DOCUMENT'
EXPORTING
objectid = 'YTEST'
tcode = 'se38'
utime = sy-uzeit
udate = sy-datum
username = sy-uname
PLANNED_CHANGE_NUMBER = ' '
OBJECT_CHANGE_INDICATOR = 'U'
PLANNED_OR_REAL_CHANGES = ' '
NO_CHANGE_POINTERS = ' '
UPD_ICDTXT_YTEST = 'U'
n_ztest_cle = wa_ztest_cle
o_o_ztest_cle = o_ztest_cle
UPD_ZTEST_CLE = ' '
tables
icdtxt_ytest = itab_cdtxt.
Is the object ID the same as the Change Document Object name ??
Please help.
Thanks,
Ram.Well, i found a way out for the problem i was facing. I was not setting the "UPD_ZTEST_CLE " FM parameter. When i set it to 'U', the changes got reflected in the CDHDR and CDPOS tables.
Can i reward myself as i solved this by myself ??? -
Error releasing transport request for change document object
Hi Gurus,
I created a new change document object for a Z-table. When i try to release the transport request in the development system it terminated with a message "Export application-defined objects 17.12.2009 11:07:45 Not yet executed". The transport request continued to be in the "Release started" status and i am not able to release it.
I checked in the co file & data file directory for this request, The co file is available but the data file is not created.
Could you please let me know how to solve this?
Regards,
Immanuel.It was a problem with some basis settings. Was rectified by the basis team.
-
Problem while generating Update progam for a Change Document Object
Hi,
I'm trying to deal with Change Document concept in a R/3 4.6C environment and to establish new Change Document object for my (Z)-table. I haven't using any namespace and created object with name ZTEST. Following the online documentation I came to the point, where I have to generate include program. I made all the nessesary inputs (using Z prefix) but faced
"Function module name is reserved for SAP"
Creating everything similarily using some of our registered namespaces (/somenamespace/) I succeed to generate the Update program and to integrate it in my Z-programs as well.
My question is: is it possible to use Change Document Object-names without predefined namespace - being a regular customer developer, but not an SAP developer - means, if I am allowed to manage programs in the customer namespace (Z,Y, X) only. If yes, how to do this?
Further (I decided not to open a new thread) - generated Update program uses
CALL FUNCTION 'xxxxx' IN UPDATE TASK
for creation of Change Numbers for generated Change Document Object. This CALL doesn't work when I implemented it in my Z-program, but when changed (IN UPDATE TASK was commented) - everything goes well and the system creates records in CDHDR/CDPOS tables for my object class and table.
Why is that? According to the documentation I shoud only fill appropriate variables for the Change Document Object (class, tr.code, etc.) and call generated FM, nothing is pointed out about any possible problems? Am I doing something wrong?
Well, to be precise, I think I have to give a sample:
1. I have a sample Z-table with few fields (their data elements are marked as Change-Document relevant).
2. Using own z-progam I created a new record for this z-table. Also fill all the nessesary variables included in the interface of generated FM for Change Document Object (for example - FM-mane CD_CALL_my_object).
3. I call the CDO FM.
4. Check what is happening (directly in both tables CDHDR/CDPOS or using FM CHANGEDOCUMENT_READ).
Further, I perfom the steps from 1 to 4 updating the created in previous loop record in my Z-table.
In both cases if the FM 'CD_CALL_my_object' is called IN UPDATE TASK nothing happens, but in case of direct call (without addition IN UPDATE TASK) the system behaves as expected. Well, obliously I can change the generated code for our production needs, but it doesn't seems to be the correct decision - in case of next possible modification of the Change Document Object definition, respectively in need of re-generation of the code.
Any hints are wellcome.
Thanks in advance.
Ivaylo Mutafchiev
Edited by: Ivaylo Mutafchiev on Jan 24, 2008 10:24 AM"IN UPDATE TASK" resolved by myself. The one should explicitly call 'COMMIT WORK' from Z-program after CALL FUNCTION '...' IN UPDATE TASK in order to get changes in the CDHDR/CDPOS commited. The key in this issue for me was to check the documentation of CALL FUNCTION :-).
Regards,
Ivo -
I have created a new Change Document Object for a Z table(say ZXXX). When Generating Update program for this change document, a new structure is generated VZXXX that has ZXXX as include. This structure does not have a Package assigned to it and therefore can not be transported.
Does anyone has encountered this problem? Any urgent help is appreciated.
Thanks
Amit.Hi,
try report RSWBO052 to change device class
A. -
Regarding change document objects
hi to all,
I created one change document object for one transaction say /tmw/tmw . Now I am trying to make changes in /tmw/tmw . table cdhdr and cdpos table are not updating anymore. but cdhdr and cdpos table are updating while passing data to function module /TMW/CHG_OBJ1_WRITE_DOCUMENT in se38 program. MY problem is tables are not updating while make changes in transaction(/tmw/tmw) screen . please help me .
thanks in advance
Edited by: mohankumarreddy on Jan 4, 2010 10:22 AMThe transaction you are using must contain the write document function modules.
steps:
1. Create the change document. (Use the transaction SCD0.)
2. Activate the change document for the object. (Use data element maintenance: transaction SE11.)
3. Generate an update for the object. (Use the transaction SCD0.)
4. Insert the appropriate calls in the corresponding programs "<----
Your write document will be havng fm's like CHANGEDOCUMENT_OPEN etc.
The same must be incorporated in your transaction also.
check sap help
link:[http://help.sap.com/saphelp_nw2004s/helpdata/en/2a/fa015b493111d182b70000e829fbfe/content.htm] -
How to set a change pointer for a perticular table?
Hi,
Please let me know how to set a change pointer for a perticular table.what do you mean by 'change pointer'? normally this idiom is used for sending ÍDOCs from one system/client/org-unit to another ...
do you generally want to record changes to a specific table? then set parameter rec/client using RZ10 for your instance profiles and restart the instances in order for the parameter to take effect.
set the table to 'record all changes' using SE11.
you might re-consider if the table has a lot of data and is accessed very often for performance-resons.
change protocols can be evaluated using tx, SCU3. -
Problem in multiple item for change document objects
hi gurus,
I have created change document object in tcode SCDO . It had giveN function module /TMW/CHG_OBJ1_WRITE_DOCUMENT.
CDPOS AND CDHDR tables are updated with changed data. now i am trying to display all old and new data in se38 program.
here my problem is when ever i changed multiple item data , my program showing first item details only . I need to show all item data when ever i changed parallel . please help me where is my problem .
thank youI think this is issue with function module generated thru SCDO Please check in your function module inside that the following function modules are used
CALL FUNCTION 'CHANGEDOCUMENT_OPEN'
CALL FUNCTION 'CHANGEDOCUMENT_MULTIPLE_CASE'
CALL FUNCTION 'CHANGEDOCUMENT_CLOSE'
if not then there may be issue with SCDO
a® -
Change Document Object ICDTXT_ include name
Hi fellow developers.
What is the purpose of each field in ICDTXT_<include name> when preparing to call the function F<include name>_WRITE_DOCUMENT? For example, I have an IT called ICDTXT_ZCD_CONFIG_CV and this is how I am filling the fields:
UPD_ICDTXT_ZCD_CONFIG_CV = UPD_Z00_CONFIG_CV.
wa_log_info-teilobjid = 'Producto'.
wa_log_info-textart = ' '.
wa_log_info-textspr = sy-langu.
wa_log_info-updkz = UPD_Z00_CONFIG_CV.
append wa_log_info to ICDTXT_ZCD_CONFIG_CV.
I am not sure at all what to set in textart. And teilobjid is the table key as far as I know. But I want to be sure I am doing this correctly.
Thank you for your time.Yes you must call the FM via the generated include in your update program, change document are programmatically managed. in the "SAVE" form use some CALL FUNCTION IN UPDATE TASK to call the FM that updates database and the FM that creates change documents - look at [Update Techniques|http://help.sap.com/saphelp_nw04/helpdata/en/41/7af4cba79e11d1950f0000e82de14a/frameset.htm] and [BC414|http://www.sap.com/services/education]
- without programming you can fill DBTABLOG via SE11 options
- Also look at [Defining Change Document Objects|http://help.sap.com/SAPHELP_nwmobile71/helpdata/EN/2a/fa018f493111d182b70000e829fbfe/frameset.htm] and [Integrating the functionality into the program|http://help.sap.com/SAPHELP_nwmobile71/helpdata/EN/2a/fa01b6493111d182b70000e829fbfe/frameset.htm]
Regards,
Raymond -
How to create a change document?
How to implement this:
When table IHPA is updated (fields: OBJNR, PARNR, PARVW)
A change document should be automaticly created in table CDHDR and CDPOS
I have gone to the T-code scdo to create a new change document object ZIHPA
and set the table = IHPA and marked Doc. for individal fields at delete
Then I generate the the fuction module ZIHPA_write_document.
I have create a program and call this fuction module.
But I'm confused by the import parameter.
And I have tried some parameter, the function run successful but no record has been created in table CDHDR and CDPOS.
Who can help me? Thanks a lot.Hi Siarhei,
Thank u for ur reply very much.
'If you are trying to log updates (change indicator = 'U') - it will log it for those fields only which have "Change document" checkbox ticked on data element level in your table.'
I have set the the checkbox as on already. But if I don't create change document manual, it will not create change document automaticlly.
Another reason for my saddness is that I have read some other write document fuction in where they are used. Such as material_write_document, but in fact, I am confused by the code. I still don't know how to get the new workarea. Can you help me? Thanks god and you. _ -
I'm supposed to catch changes to my custom table with a Change Document Object. I know that this creates a series of includes that I need to put on my program and a function module which I would use to catch the change. My question is, is there any example of a standard program that implements how I should work with this change document object?
Thanks for the link but I've been through every tutorial in that page. I just want to see it implemented on some standard program or something so I can visually see how it works.
-
Transporting Change document Object from development to quality
Hi All,
I have created a change document object from SCDO for my custom table. Now I want to transport this object from development server to quality server.
As while creating Objects some enteries are made into standard table CDHDR and CDPOS which is client dependant so how to work this object on another client.
Do I need to create seperate objects on quality server and then on production server?
ThanksHi Kiran,
use transport connection to collect the objects to request, rsa1->transprot connection.
use infocube as starting point to collect objects, left side choose 'object type', middle frame choose 'infocube' expand 'select objects', locate/search your infocube' and 'transfer', it will go to right side.
in right up, there are buttons, click 'mode' and choose manual, and grouping 'only necessary objects', and execute, this will collect infocube and required objects like infoobjects, infoarea, etc.
after that change grouping 'in dataflow before' and execute, this will collect update rules, ods, infosource, transfer rules, datasource assigned etc.
remember to assign source system, click yellow box with X icon and mark the source system.
after that use grouping 'in dataflow afterwards' to collect query, web template, role etc.
take a look transport docs
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3010ba90-0201-0010-2896-e58547c6757e
http://help.sap.com/saphelp_nw2004s/helpdata/en/0b/5ee7377a98c17fe10000009b38f842/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e883de94-0501-0010-7d95-de5ffa503a86
http://help.sap.com/saphelp_nw2004s/helpdata/en/b5/1d733b73a8f706e10000000a11402f/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/57/38e1824eb711d182bf0000e829fbfe/frameset.htm
Re: Transport Organizer---
transport query (bex objects)
http://help.sap.com/saphelp_nw2004s/helpdata/en/38/5ee7377a98c17fe10000009b38f842/frameset.htm
hope this helps.
(Courtesy AHP from Re: transport)
Bye
Dinesh
Maybe you are looking for
-
Load multiple parts of an XML file into one dynamic Text Field
Hi I am trying to load text from an external XML file into a dynamic text box. I have so far managed to load single parts of the XML file into a dynamic text field. I now want to be able to load different parts of the XML file (something similar to a
-
How to implement SubType/SuperType in Oracle ?
Hi, I have a supertype and three subtypes, as attached below, how is the best approach to implement it in Oracle (9i/10g) ? Thank you for your help, Krist Supertype : Employee Employee_Number Employee_Name Address Employee_Type Date_Hired SubType : H
-
How do I get rid of 15 cents on my Apple ID to change countries
How do I get rid of 15 cents on my Apple ID account to change countries
-
Hi All During the month end process, we found that the report total was not correct. For this purpose unfortunately we did the mass reversal of 126 documents using the T.code: F.80. But this is wrong. How can we retrive back the reversed documents to
-
The biggest lick of the lollipop rolling out to the Galaxy S6's
See this..... See that top file....5.1.1 brings you RAW support and camera2 api.