How to set a change pointer for a perticular table?

Hi,
Please let me know how to set a change pointer for a perticular table.

what do you mean by 'change pointer'? normally this idiom is used for sending ÍDOCs from one system/client/org-unit to another ...
do you generally want to record changes to a specific table? then set parameter rec/client using RZ10 for your instance profiles and restart the instances in order for the parameter to take effect.
set the table to 'record all changes' using SE11.
you might re-consider if the table has a lot of  data and is accessed very often for performance-resons.
change protocols can be evaluated using tx, SCU3.

Similar Messages

  • How to set a anchor point alignment character in table??

    PLs help i am a new in javasprit.
    i have no idea how to do that><
    1. select the (align the decimal point)
    2. 48mm
    3. alignment character
    my script:
    var myDoc=app.activeDocument;
        var    myParagraphStyle = myDoc.paragraphStyles.item("Table");
            myName = myParagraphStyle.name;
    var tabletable = myDoc.tableStyles.item("Table");
    var myTable = app.selection[0].convertToTable("\t","\r");
    myTable.appliedTableStyle= tabletable
    myTable.columns.item(0).width = "50 mm";
    myTable.columns.item(1).width = "50 mm";
    myTable.columns.item(2).width = "50 mm";
    var celltable = myDoc.cellStyleGroups.item('Cell').cellStyles.item('Table');
    myTable.cells.everyItem().appliedCellStyle = celltable;
        app.selection[0].applyParagraphStyle(myParagraphStyle, true);
    myTable.columns[0].cells.itemByRange(0,-1).texts.everyItem().appliedParagraphStyle = myParagraphStyle;
    Thank A Lotpls help>< i have thought for a few week

    Hi,
    If MP is your paragraph or your paragraphStyle or some text:
    MP.tabStops.add({alignment: TabStopAlignment.CHARACTER_ALIGN,
    // above is for 1
    position: 48,
    // above is for 2, unit is used from your doc settings
    alignmentCharacter: ","});
    // above is for 3
    enjoy:)
    Message was edited by: Jump_Over

  • Sun ONE Studio 4 aka Forte: How to set the output path for classes ?

    Help !
    Beginner's question:
    Sun ONE Studio 4 aka Forte:
    How to set the output path for classes ?
    As default, the class files are created in the same directory as the
    sources.
    In opposite, both JBuilder and Together support that there is a tree
    with the sources and another tree with the classes.
    The first answer I got was "not possible with Forte, but just if you write your own "ANT Build script" !
    a) Please point me to a ready-to-use ANT script for this purpose, if such is available
    b) Is using ANT instead of the MAKE as comfortable ? Besides the separation of sourcecode and classes, I would like to keep everything else to be the same, i.e. I don�t want to edit the ANT file if I enlarge the project by directories or files.
    Tia
    Sincerely
    Rolf

    You can set S1S's options to place newly created .class files in a specific location.
    Identify the compiler that is being used - Open the S1S's Tools/Options window, expand Editing and select Java Sources. Note the Default Compiler value. (If it's one if the Ant options, you use Ant to specify this option, not S1S.)
    Open the S1S's Tools/Options window, expand Building/Compiler Types and select the appropriate compiler.
    The Properties tab of the compiler has the property Target, which sets the filesystem where the compiler output is directed. If you choose <not set>, the .class files are written to their source directory.
    When you set the Target, your change affects all classes that use this compiler.
    Very few options can't be set in S1S; the challenge is finding out where they're set!

  • Change pointer for HR master data is not getting generated in table BDCP

    Hi,
    I have done all the required configuration for change pointer for HR master Distribution and it was working fine few days back. Now suddnly it has stopped working.
    Can anyone assist me on how should i debug it.
    Thanks
    Sunil Singh

    Hi Shital,
    Thanks for your Reply.
    I am not able to find that path in SPRO
    Basic Functions-> application Area
    And Also My change pointer configuration was working properly and it suddenly stopped working.
    I mean to say all the required settings was done previously.
    Anyways kindly let me know how should i proceed.
    Thanks
    Sunil Singh

  • How to set up Airport Extreme for 11ac and 11n?

    I have just purchased the new Airport Extreme (August 2014) because Apple's website states
    Simultaneous dual-band support.
    AirPort Extreme features simultaneous dual-band 802.11ac Wi‑Fi. That means it transmits at both the 2.4GHz and 5GHz frequencies at the same time. So no matter which band your wireless devices use, they’ll automatically connect to the best available band for the fastest possible performance.
    I have number of Macs in my home from a new MacBook Pro with Mavericks to a Macbook Air with Snow Leopard (due to required software) and iPads.
    So after setting up the new Extreme my new MacBook only accesses 11n as does my older Macs. I checked by holding down the option key while clicking the WiFi icon at the top of my Mac. Well, not so automatic then as I was expecting 11ac and 3 times faster access (as stated by Apple).
    I then looked for some documentation for setting up but cannot find anything.
    Hence my question here.
    How to set up Airport Extreme for 11ac and 11n simultaneously?
    At present the new Extreme is no better than my previous 2 year old one.
    Thank you.
    Michael

    How to set up Airport Extreme for 11ac and 11n simultaneously?
    Assuming that it is operating correctly, 802.11ac and 802.11b/g/n are broadcast simultaneously by default.
    Simultaneous dual-band support.
    AirPort Extreme features simultaneous dual-band 802.11ac Wi‑Fi. That means it transmits at both the 2.4GHz and 5GHz frequencies at the same time. So no matter which band your wireless devices use, they’ll automatically connect to the best available band for the fastest possible performance.
    That is advertising. The real information is usually found in the small and hard to read footnotes:
    Based on theoretical peak speeds. Actual speeds will be lower.
    AirPort Extreme is based on an IEEE 802.11ac draft specification. Performance based on comparison with Apple’s 802.11n products. Comparison assumes AirPort Extreme network with 802.11ac-enabled computer. Speed and range will be less if an 802.11a/b/g product joins the network. Accessing the wireless network requires a Wi‑Fi-enabled device. Actual speed will vary based on range, connection rate, site conditions, size of network, and other factors. Range will vary with site conditions.
    Since the 802.11ac signal is being broadcast only using the 5 GHz band, some users report that they have had better results by using the option to assign a different name to the 5 GHz band, and then pointing their Mac to that specific signal or network. You may want to try that option.
    But first as a test, please locate the MacBook Pro about 10-15 feet or 3-4 meters from the AirPort Extreme with clear line-of-sight between the two devices. Restart both the AirPort Extreme and the Macbook Pro and then check to see if the Mac is connected to an 802.11ac signal.
    If not, please power off your other wireless devices...computers, mobile devices, etc. temporarily, and try the same test again.
    Please report on your results.

  • How to set a default value for particular field in SRM PO Portal

    Dear Gurus,
    Im desparetly need a help in web dynpro on how to set a default value for a field(flag) in PO header tab in portal.
    My requirement is whenever the user press the edit button in PO screen,automatically a flag field should be set as abap_false.
    I dont think this will handle in check badi or change badi. i tried this part in onbuttonpressed overwriteexit in CNR_VIEW views,i can get the function EDIT in debugging mode,but dont know how to proceed further.....
    Many of them suggested to go with get attribute and set attribute for changing any particular field in web dynpro,but im not very familiar in using those get and set attributes.I request you people can give me sample code on how to identify my target field in the node and set the values while pressing EDIT Button.
    Thanks in advance...
    Regards,
    Sathish

    Dear Laurent,
    Thanks for your response,
    But i searched in enhancement spot of WD_BADI, but couldnt get the exact way to change the coding,
    My real requirement is, that particular flag should be enable and disable dynamically by checking a condition in my header values.So in that case i dont know how to proceed further to handle in the PO screen.
    Kinly guide me how to get the particular node of field in the Purchase order screen.
    Thanks you in advance,
    Sorry for the inconvenience if any
    Regards,
    sathish

  • How to set the out point beyond 9.95 seconds???

    how to set the out point  in Motion 5 beyond 9.95 seconds???

    First you need to make sure your project is long enough then you can adjust the play range (in/out). To make sure the project is long enough:
    1. From the project properties (command-J) go to the Duration field and enter a new duration.
    2. Click on the down arrow icon to the right of the current time, there is an option to show the project duration. Once set to this you can double click the number and type in a new project duration. I'd recommend setting it back to show current time when done.
    3. Of course you can also change the duration of a project when it is first created, in the project browser.
    Once you're sure you have a long enough project you can adjust the in and out range.  You then use the zoom controls in the bottom of the timeline to show more of the timeline and adjust the play range as needed. There's lots more about project and play range duration adjustments in the documentation: http://help.apple.com/motion/mac/5.1/

  • How to set displayed column width for a search help

    I have created an elementary search help for a custom field with a value table behind it.
    The search help functions correctly, but when displayed the column widths are all 10 characters. The user has to adjust the column to view the descriptive text.
    Can anyone tell me how to set default column widths for the help?

    Please  open you Elementary search  help  and see the Column  width   behind the Fields of your ...there  increase the width of the fields
    "Activate it  and refresh
    reward  points if it is usefull .....
    Girish

  • How to set line break points in JSF Facelets files on NetBeans?

    I am running debugger on NetBeans. I can set line break points for jsp files but cannot for Facelets files with extension 'xhtml'. Dose anybody know how to set break points for Facelets xhtml files? Or is it possible to set break points for xhtml filles?
    Thank you very much.

    You can't. They aren't executable code, they are templates. The only executable code is the part inside #{}.

  • How to set custmer master block for posting & how to set the status .....

    < MODERATOR:  Message locked.  Please read the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] before posting next time. Use an appropriate subject in your message thread. >
    Hi ...
    How to set custmer master blocked for posting & how to set the status has deleted. please provide the steps for the above two actions.
    thanks

    Hi,
    U can use T-code FD05 for Blocking the customer and
    T-code FD06 in order to set for deletion,
    Assign Points if useful,
    Regards,

  • HI How  to set a Break point In Smart Forms

    Hi Guys,
    i want to set a break-point in main window of the smart form ,before dispalying
    values of the varibles in the main window .
    How to Set a break-point And What are the ways to set a break point.
    Thanks for All.
    From
    Hitu.

    Hi Hitu,
    Generally, Break Points are set for the purpose of debugging in Smartforms.
    For debugging , one of the way is :
    1. Write BREAK POINT in the code window.
    2. Put a break point on the call function in the driver program
    3. Put a break point in the generated Function module.
    Hope this resolves your query.
    <b>Reward all the helpful answers.</b>
    Regards

  • How to set the stack size for alchemy application?

    Anybody know how to set the stack size for alchemy application?
    If you know, please tell me how to adjust the stack size for alchemy application?

    Hi,
    The stack size is set as public const gstackSize in the alchemy generated code.  You can see this if you build with ACHACKS_TMPS set.  The default is one megabyte.
    One way to change the stack size is to use llvm-dis to disassemble avm2-libc/lib/avm2-libc.l.bc, generating avm2-libc.l.ll, modify the constant, and then use llvm-as to recompile your modified library and overwrite the old one.  These utilities should be in your path if alchemy is set up.

  • Change pointer for Extended IDOC

    Hi guys,
    I have Extended a standard IDOC MATMAS and added few additional fields into it.
    Now i have make Change pointers enabled for this IDOC extension.
    Is it possible?
    Can some one guide me as to how can i create Change pointers for EXTENDED IDOC?
    any extra steps required?
    Sahil

    Hi,
    you can use BD52 transaction to add the extended idoc fields inorder to activite the change pointers for them.
    Please note that the fields in the extended idoc should have chnage entry in CDHDR whenever you change the field in MM02 transaction. if not change pointer will not work.
    If these fields are not marked in change entry in MM02 transaction you can use user exit while saving MM02 and then create the change document for them by coding inside those user exit.
    Hope it helps,
    Shanmugavel chandrasekaran.

  • How to set the connection parameters for SQL

    How to set the connection parameters for SQL to access the MS Access database
    Attachments:
    Quick_SQL.vi ‏21 KB
    Doc1.doc ‏45 KB
    db1.mdb ‏112 KB

    Right-click the WINDOWS desktop, choose New->Microsoft Data Link. That will bring up a dialog that allows you to configure and test your database connection. You might connect to the Access database via ODBC or directly via Jet Engine. The Jet Enginge saves you the trouble of creating an ODBC connection on your PC. After you leave the dialog, the "data link" will show up on your desktop as text file. Open it and copy-paste the connection string to your VI.
    This webpage is an excellent resource for connection strings: http://www.able-consulting.com/ADO_Conn.htm
    If your application requires users to change the database connection at runtime, you can also include the dialog via ActiveX (MSDASC.IDataSourceLocator).

  • How to add "Done" button on Number pad? And how to set 00.00 format for UITextField?

    1.) I am new to iPhone development. I have a small application & for that I need to add number pad but there is no "Done" button. I know we can get rid of that keyboard by clinking UIView but I want a separate button for this.
    2.) My second question is how to set 00.00 format for UITextField as there is no decimal point available on number pad?

    As to #1, you should study the iOS HIG - doing what you have in mind might be a good way to risk rejection and not have your app make it into the store.
    #2:
    On devices running iOS v4.1 and greater  you can use the following:
    myTextField.keyboardType = UIKeyboardTypeDecimalPad;
    It is tricky (and perhaps not worth the trouble) if you are trying to support older iOS versions.  Here is a link to the most popular solution.

Maybe you are looking for