How to set up multiple speakers

I am connected to my stereo via AP Express. I would like to have the music streaming to those speakers and at the same time coming thru on my computer speakers. On the drop down menu at bottom of itunes I only get to choose one or the other - no provision for selecting both. There is no choice for 'multiple speakers'. Any ideas.
emac 10.4.8 Itunes 7.0.2

All I remember is that I had to update the firmware of the Airport Express in order to get it to work. It was a change in the AirTunes part of the Airport Express.
You don't need to do anything with the Airport Extreme card. In fact you can use it over ethernet and not wireless. That's how we have it set up at work.
I can remember the firmware version required was released over a year ago. I have no idea if there is any information about it. Anyway, just update it to the latest.

Similar Messages

How we set up multiple websites on OSX Server

BACKGROUND
After fiddling and futzing around for weeks (actually since last year) I've finally figured out how to set up multiple websites (virtual sites) using one port and one IP address. While there seems to be lots of discussion on this topic, it seems that the basic assumption is that one knows everything about websites, DNS and all that stuff, which I do not.
When our network was originally established the engineer set up a wiki and also configured webmail, so we had two sites, one secured for mail and the other open for Calendar and the wiki. We were not hosting any websites locally because our school website is hosted by a company in New England.
This year I wanted to set up websites for teachers and students. As great as the wiki is, there are some things it just can't do as well as a website. So I figured if I set up the sites teachers could link back and forth from one to the other. In addition kids could now start to use a real website instead of the cobbled together file mess I had when we ran a Windows network. Also iWeb is a much more accessible tool than FrontPage.
SERVER SIDE:
Snow Leopard Server - 10.6.4
There are two - actually three pieces if you want your iWeb clients to connect to the server: Server Side Web Services, DNS and, in my case, FTP.
================================================ SERVER SIDE - WEB SERVICES
If you haven't turned on Web services, you'll need to open Server Admin and do that. If you don't know how to set up web services - just reply and I'll step you through that as well.
Once web services are set up and turned on, you'll see it listed under your server’s name in the Server Admin sidebar. Click on "Web" and then click on the "Sites" tab at the top of page. This is where you list all your sites.
Click the plus button and enter the fully qualified name of your site, for example: "students.myschool.org". Don't use the defaults here (no name) - that's what got me in trouble before. BE SPECIFIC!
You'll be looking at the "General" tab (the other tabs, "Options", "Realms", etc. we'll deal with in a second).
On the "General Tab", the default IP address ("any") and port (80) is just fine. We'll run everything over port 80. (Apache figures all the virtual site stuff out - you don't need your rocket science degree for that.)
"Web Folder:" is important because this is how you'll "segment" your websites. While I would NEVER do this again, we have a solid state hard drive for the OS and a RAID array for our data files. IF you have that, make sure you do NOT use the default "Web Folder" because it will store all your files on your solid state drive. There may not be enough room, over time, on that drive. I've not experienced it yet, but it's my understanding that if the drive fills up, the server shuts down.
I store my web sites on a folder on the RAID array.
Everything else on that tab can be left as the default. (Just make sure that you have an "index.html" or "index.php" file in your web folder root, but iWeb will take care of that for you.)
I would put in your email address in the "Administrator Email:" field.
Under "Options" you really don't have to put anything. I've tested making websites with iWeb and it doesn't appear that anything needs to be checked.
Nothing needs to be entered in "Realms" as well from what I see working w/ iWeb.
The defaults in "Logging" are fine.
You can leave "Security" alone, but we do have a (self-issued) certificate listed for our webmail site.
"Aliases" is important. Under "Web Server Aliases" you enter how you want the site to respond to when users type in a URL in their web browsers.
When our web server was initially set up the engineer set up "wiki.myschool.org" on port 80 and "mail.myschool.org" on port 443. In the aliases section was nothing but a "*" (the wildcard character). That means, from what I can figure out, that the webserver will respond to these sites regardless of what is typed in the URL. (Well, something like that - point is, if you create OTHER websites, you'll NEVER get to them because the wildcard character in the "Aliases" section, in effect, grabs those web requests and redirects them to the sites that are already there.
In my case I deleted both of those wild card characters. For my "wiki.myschool.org" site, I entered "mail.myschool.org". That means if you type EITHER "wiki." or "mail.", go to the site that’s stored in the “Web Folder” we set up when those sites were created.
For "mail.myschool.org" I just DELETED the wildcard character. I wanted that site (since it was secured) only to respond to "mail." - nothing else. (You're not going to that secured site for any other reason than to get your mail.)
"Proxy" can be left blank. Have no idea what that does. As time permits I'll do some research and figure out what it's used for.
"Web Services" is if you want to provide any MORE services to this particular site. Most likely you'll want to uncheck all the boxes. For our "wiki." site, we have checked "Wikis", "Blogs", and "Calendar". For our "mail." site we have those checked PLUS "Mail".
I would create a separate "Web Folder" for each of your sites. I don't know if that's a requirement but for housekeeping purposes, I would keep the sites separated. And I SUSPECT that it's "best practice" to separate your wiki from your other websites.
SERVER SIDE - DNS
OK...now you have to make your site reachable and the only way to do that is to set up DNS so that folks don't need to type in the IP address of your web server. You need to set up DNS inside your network and, if you want folks in the outside world to reach your website, you'll need to set up an external DNS as well. I'm going to cover INTERNAL DNS - if you don't know how to set up EXTERNAL DNS - reply or email me and I'll post those instructions.
Most likely you have already created Zones for you network...all you really need to do is create "Aliases" so that when you type "students.myschool.org" your web browser will know that site resides on IP address XXX.XXX.XXX.XXX.
If you've set up Zones then you already have a "Machine" setting that translates your server’s name to an IP address and vice versa.
All you need to do is create an "Alias" (CNAME) record for, in this case, "students". You’ll see the choices for types of records when you click the "Add Record" button.
There are only two fields to configure for a record: "Alias Name" - in this case "students" and "Destination" - in this case "servername.myschool.org". (You've already entered a machine record that says "servername" = 192.168.1.x.)
That's it for Internal DNS.
SERVER SIDE - FTP
Now you have to get iWeb to communicate with the webserver.
There are only three ways iWeb will communicate with webservers: MobileMe, Local Folder and FTP Server.
Local Folder is really only practical if you want to host a website on a laptop (I was blown away initially when I found out that all Macs had a built-in web server - how neat is that?). I think there are some very cool things teachers could do with configuration, and, of course, you wouldn't need to set up any web services on the web server, but that's for another discussion. You need to set up FTP services on the web server.
Turn on and enable FTP on your webserver.
You can leave the defaults for "General", "Messages" and "Logging". "Advanced" is the only thing you want to set. I set "Authenticated Users See:" to "Home Folder Only". I set the "FTP Root" to the same root folder in which I plan to store my web sites (/VOLUMES/RAID Array/WebServer/Documents). This setting sets that folder only to be accessible via FTP.
I would suggest returning to your DNS settings and adding one more "Alias". Set "ftp." to point to your webserver. Why? So folks can edit their sites from home (see below).
CAVEAT: If you are running FTP on other servers, make sure that the settings here do not conflict with the settings on the other servers. For example, I'm running FTP on my file server so that my scanners can communicate with it. However, I configure my FTP settings by machine name and NOT "ftp.myschool.org".
================================================
CLIENT SIDE - CONFIGURING iWEB
Now you have to configure iWeb so that it will communicate with your server.
Click on the "Site" icon so that "Site Publishing Settings" appears.
Publishing:
"Publish to:" = "FTP Server"
You can set the "Site name:" and "Contact email:" to whatever you want. But see below!
FTP Server Settings:
"Server address"=ftp.myschool.org (you could also enter in servername.myschool.org or the IP address. However, if you want folks to be able to work on the site from home, you will need to configure external DNS for that. If you use the IP address, you're out of luck for remote access to the site. (You can do it but it's beyond the scope of this discussion.)
"Username" & "Password" should be your user's network login credentials.
"Directory/Path" - this is important. Remember, you set your "FTP Root" to be "/VOLUMES/RAID Array/WebServer/Documents". If you leave this field blank then the website will be dumped into this folder. If you are only setting up one site, that may be OK. However I wanted to set up a "students" site folder, a "faculty" site folder and a separate site for our literary magazine.
THEREFORE: I have, in my ..../Documents folder (on the server), a "students" folder, a "faculty" folder, and a "litmag" folder.
SO...in my "Directory/Path:" field, I have "/faculty". That means the full path to this website is "ftp root/faculty" or "/VOLUMES/RAID Array/WebServer/Documents/faculty" (You don't need a trailing "/" character. iWeb will automatically append the folder for you user depending on what you entered in "Site Name:" in the "Publishing" area.
Website URL:
This is the root website depending on whether it is "students" or "faculty". Since iWeb will append the site name to this root website, I accomplished what I hoped to accomplish in this post (http://discussions.apple.com/message.jspa?messageID=12288561#12288561).
Faculty sites will be @ http://faculty.myschool.org/username. Students @ http://students.myschool.org/username. PERFECT!
iWeb is such a GREAT tool - NOW the kids can start using it!
I want to reiterate that this works for our school but it should work for you as well. There may be better ways to do this but it works for us.
Hope this has been helpful and you won't have to spend weeks trying to figure this all out by yourself!

OK...here's how we did it.
To get access to the website you created from outside your network there are a couple of steps.
First, you have to have a STATIC IP address from your ISP. If you have a T1 circuit, no problem...you usually get a couple of static IPs you can use. However, if you have a cable modem circuit, most likely you have a dynamic IP address which changes when you connect to the internet. Usually a static IP will cost a bit more because the ISP has to go through a couple of steps to set it up for you. But once you have the address, you now have a way for folks outside your network to connect with you.
(I’m also assuming that you use a router of some sort through which traffic flows out to the internet and that you aren’t using connection sharing or something like that.)
The next thing you need to do is have your new static IP address associated with the server on which you are hosting your website. You've probably already done that if your website works inside your network. However, you've associated a private ip (192.168.x.x, etc.) to your web server. That doesn't mean anything to folks on the outside because private IP addresses are just that - private - folks can't access them. (I won't get into VPN because that's a whole other topic.)
The way you associate your new static IP address to your web server is through some sort of dns application from your ISP. For example, we use TierraNet to manage our external DNS information. They have a web interface control panel that is very similar to the DNS interface for XServer. You can create CNAME records (aliases - other ways that folks can access your servers).
Basically you create an "A" (CNAME) record with a fully qualified domain name (e.g. webserver.myschool.org) and point it to your public IP address (XXX.XXX.XXX.XXX) which you just got from your ISP. It's going to take a while (24-48 hours) for this change to take effect. BTW, you can create as many “A” records as you want. For example mail.myschool.com and wiki.myschool.com could point to the same place.
You want to make sure that the fully qualified domain name you enter in the external dns utility matches the name you used when you created your internal dns records on your XServer.
OK...so now folks can get to your domain - but, remember, you have a private network IP scheme between them and you. You now have to tell your router that when web traffic arrives, allow it inside the network and direct it to your web server.
Let's say your public IP address is 205.100.112.50 and your web server is 192.168.0.5.
You have to create, in your router’s "Security Zone" (router companies call them different things) a couple of rules. Usually the first rule is: "Let everything inside the network get out to the web." You've probably already done that if folks inside the network can reach the internet.
You then have to tell the router to allow web traffic (port 80) into your network AND redirect that traffic to 192.168.0.5.
We use AdTran routers and they have a web interface which allows you to write "rules" affecting public and private traffic. Public is folks outside the network, private is folks inside.
AdTran calls them "Security Zones" and you modify those zones with policies.
So my "Policy" would say, in the above example, redirect traffic from my public IP (205.100.112.50) -> to my web server -> (192.168.0.5).
THEN you have to modify this policy with what AdTran calls "Traffic Selectors". You've said, OK, you can get in, but WHAT can get in?
The "Traffic Selector" is written to say: "Permit" "TCP" traffic from 205.100.112.50 only through Port 80. (That's the port that web traffic goes over. If you wanted a secure website, you'd add another traffic selector that opens port 443, for example.)
I'll tell you I'm no genius when it comes to this. I called AdTran and had them configure my router for me. I told them what I wanted done, they remoted into the router and configured it. But then I could go to the web interface and see what they did and then added rules later on when I wanted, for example, to get access to the network via Apple Remote Desktop or VPN into the network on my iPad.
I'd bet that your router has a maintenance agreement that includes this service and if it doesn't it should have.
I did find that I still had issues when I tried to set this up originally and it had to do with the ORDER of the policies. I can’t remember exactly what the issue was, but, effectively one of the policies highjacked traffic before the policy that I wanted got triggered. Simply moving them around in the list fixed that issue. So if you have this set up but still can’t access the site, check the order of your rules.
I don’t know if that helps or not, but I try to think about this stuff conceptually and then get someone to help me with the details. I work with this stuff so infrequently that I forgot how I did something 6 months or a year ago. I’m in the process of creating a wiki for the school which documents all this stuff, but that’s a major undertaking.
Cheers,
John

How to set-up multiple AE for AirTunes

Hi Everybody,
just ordered a second AE since the simultaneous streaming is offered now. So I borrowed a friends AE to check it out, but we couldn't get the second AE to show up neither on multiple speakers (speakers were hooked to the second AE!) on iTunes nor on the Airport Admin Utility (it was showing up when it was running alone though). His AE is updated to 6.3 as well. Maybe it had something to do that my base AE was protected through WPA; I later changed it back to WEP and now I can check the "allow wireless clients on this base station". Unfortunately my friend took his AE back home...:-)).
I do know that this actually is not the precondition of streaming through AirTunes, but would like to know how I should set-up the second AE in order to make it play the music. Since I'm expecting my new AE tomorrow any advice would be deeply appreciated. Internet and AirTunes connections to main AE are running without any problems.
Best regards
Roman
iTunes 6.0.2
AX Firmware 6.3
Sony VAIO Z1XSP, XP Professional
Intel(R) PRO/Wireless 2200BG Network Connection, Driver Version 9.0.3.9
Sony VAIO Z1XSP Windows XP Pro

Alan,
phuhh - took me 4 hours to figure this one out!!
First I couldn't set up the second AE with the assistant, so I only used Admin. Utility trying all kinds of settings (the connection has to be manually and not over "Using DHCP"). Had to try around with different IP addresses. But the real issue was with the security settings. Had changed it yesterday to 128 bit WEP and the same Password was set to both AEs. No success! Then finally I switched security settings off and got it to work! Now I put in the MAC addresses of my Laptop and second AE for access and put security settings to 40 bit WEP; this should work. WPA is not available for setting the base station as a WDS. Man, these airports sometime can really hang you up there...
Thanks again for the help.
Best
Roman

How to set up multiple libraries on one computer

How do you set up multiple libraries on one computer for itunes?

Launch iTunes with the Shift key(Windows) or Option key(Mac OS X) held down.
(90004)

How to set up multiple NLS_LANG or update the NLS_LANG in windows registry

Hi!
In our server machine, we have installed the Oracle Net Manager Version 10.2.0.0.0, which is used to connect to different oracle databases in different NLS_LANG settings (i.e., JA16SJIS, KO16KSC5601, WE8ISO8859P1). Currently, our NLS_LANG is set to "AMERICAN_AMERICA.UTF8". In order not to convert the character set to UTF-8 format, could anyone tell me:
1. how to set multiple NLS_LANG for different databases in registry
2. how to switch the NLS_LANG setting in registry programmatically in order to retrieve/view the data in the corresponding character set (same as the setting in Oracle DB) for the dedicated oracle database
Please advise. Thanks a lot
Best Regards
Pinga

1. how to set multiple NLS_LANG for different databases in registryBy default NLS_LANG registry settings is linked to the Oracle home and not to the database. I don't think that you can set a NLS_LANG setting for each database (unless you are using a command line tool and in this case you can set the NLS_LANG environment variable).
See also OTN NLS_LANG FAQ.

How to set up multiple devices

We have 2 iPads, 1 work and 1 personal. We also have an iMac. I have been struggling with how to set up my the devices. Right now all are on one Apple ID. I want to be able to use Face Time, message etc and I have no clue if I should use multiple IDs or if I can have 1 with multiple email...so far I have had no luck with Facetime

How to use multiple iPods, iPads, or iPhones with one computer

How to set a Multiple condition in a single CFL

Hi everyone,
Hey guys, i have a problem filtering a CFL (ChooseFromList)
where i have to select records
WHERE U_SalesmanCode = <ConVal>
AND U_Status = <ConVal>
So i've come up with an idea setting up multiple conditions on a single CFL.
i have a function "SetCFLConditions" that will be called after the CHOOSEFROMLIST_EVENT was triggered. this will set the conditions on a loop method.
the CODE works fine. but it only accepts the last condition.
Public Sub SetCFLConditions(ByVal _chooseFromList As String, _
                                ByVal _alias As String, _
                                ByVal _operation As SAPbouiCOM.BoConditionOperation, _
                                ByVal _condVal As String)
        Dim oCFLCollection As SAPbouiCOM.ChooseFromListCollection = _form.ChooseFromLists
        Dim oCFL As SAPbouiCOM.ChooseFromList = oCFLCollection.Item(_chooseFromList)
        Dim oCons As SAPbouiCOM.Conditions
        Dim oCon As SAPbouiCOM.Condition
        Dim asAlias() As String = _alias.ToString.Split(",")
        Dim asCondVal() As String = _condVal.ToString.Split(",")
        Dim i As Int16
        oCFL.SetConditions(Nothing)
        'oCons = oCFL.GetConditions()
        For i = 0 To asAlias.Length - 1
            oCons = oCFL.GetConditions()
            oCon = oCons.Add
            '//LOOP CONDITIONS
            With oCon
                .Alias = asAlias(i)
                .Operation = _operation
                .CondVal = asCondVal(i)
            End With
        Next i
        oCFL.SetConditions(oCons)
    End Sub
Pls. Help
Thanks
Roger

Hi,
This is how i add the conditions..
Dim oCFLS As SAPbouiCOM.ChooseFromListCollection
Dim oCons As SAPbouiCOM.Conditions
Dim oCon As SAPbouiCOM.Condition
Dim oCFL As SAPbouiCOM.ChooseFromList
Dim oCFLCreationParams As SAPbouiCOM.ChooseFromListCreationParams
oCFLS = objForm.ChooseFromLists
oCFLCreationParams = objSBOAPI.CreateUIObjectSAPbouiCOM.BoCreatableObjectType.cot_ChooseFromListCreationParams)
oCFLCreationParams.MultiSelection = False
oCFLCreationParams.ObjectType = "2"
oCFLCreationParams.UniqueID = "CFL1"
oCFL = oCFLS.Add(oCFLCreationParams)
oCFLCreationParams.ObjectType = "2"
oCFLCreationParams.UniqueID = "CFL2"
oCFL = oCFLS.Add(oCFLCreationParams)
oCons = objForm.ChooseFromLists.Item("CFL1").GetConditions
oCon = oCons.Add()
oCon.Alias = "CardType"
oCon.Operation = SAPbouiCOM.BoConditionOperation.co_EQUAL
oCon.CondVal = "C"
objForm.ChooseFromLists.Item("CFL1").SetConditions(oCons)
objForm.ChooseFromLists.Item("CFL2").SetConditions(oCons)
Hope it helps,
Vasu Natari.

HT5517 How can I choose multiple speakers to play simultaneously from AppleTV in the same way I can from iTunes on my PC?

Is there a way to select multiple speakers with Apple TV?

i don't think so if I remember properly... I've wanted to do that and I remember I couldn't... would be a good feature!

How to set up multiple streams on one PC

Hi there,
can anyone guide me in setting up multiple streams using the FLME and different sources?
thanks,

Hi,
Did you know that you can have several instances of Flash Media Live Encoder running on your computer?
Open FMLE and choose the camera you want to use and set the parameters etc.
double click the FMLE application again and other instance will open. You can then set up a different camera on this instance, this way you can have two cameras streaming at the same time.
the only issue here is that you need a computer powerful enough to handle the multple streams and the bandwidth of multiple streams from the computer to FMS for example.
Is this what you meant?

How to set up multiple JVMs on same server

I try to set at least 2 JVMS run on same server (2CPUS) but I do know how to set manual start server. I can't find the startup and stop scrits in oracle_home/apache/apache/bin directory. Who can help me to set this up?

my reply is good haina
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by jianing shu ([email protected]):
I try to set at least 2 JVMS run on same server (2CPUS) but I do know how to set manual start server. I can't find the startup and stop scrits in oracle_home/apache/apache/bin directory. Who can help me to set this up? <HR></BLOCKQUOTE>
null

How to set a Multiple condition for a single CFL

Hi everyone,
Hey guys, i have a problem filtering a CFL (ChooseFromList)
where i have to select records
WHERE U_SalesmanCode = <ConVal>
AND U_Status = <ConVal>
so i've some up with an idea setting up multiple conditions on a single CFL.
i have a function "SetCFLConditions" that will be called after the CHOOSEFROMLIST_EVENT was triggered. this will set the conditions on a loop method.
the CODE works fine. but it only accepts the last condition.
Public Sub SetCFLConditions(ByVal _chooseFromList As String, _
                                ByVal _alias As String, _
                                ByVal _operation As SAPbouiCOM.BoConditionOperation, _
                                ByVal _condVal As String)
        Dim oCFLCollection As SAPbouiCOM.ChooseFromListCollection = _form.ChooseFromLists
        Dim oCFL As SAPbouiCOM.ChooseFromList = oCFLCollection.Item(_chooseFromList)
        Dim oCons As SAPbouiCOM.Conditions
        Dim oCon As SAPbouiCOM.Condition
        Dim asAlias() As String = _alias.ToString.Split(",")
        Dim asCondVal() As String = _condVal.ToString.Split(",")
        Dim i As Int16
        oCFL.SetConditions(Nothing)
        'oCons = oCFL.GetConditions()
        For i = 0 To asAlias.Length - 1
            oCons = oCFL.GetConditions()
            oCon = oCons.Add
            '//LOOP CONDITIONS
            With oCon
                .Alias = asAlias(i)
                .Operation = _operation
                .CondVal = asCondVal(i)
            End With
        Next i
        oCFL.SetConditions(oCons)
    End Sub
Pls. Help
Thanks
Edited by: Roger Arce on Apr 17, 2009 12:14 PM
Edited by: Roger Arce on Apr 17, 2009 12:15 PM

Hai Roger Arce
Better you post your question in SDK forum
Edited by: Prasanna s on Apr 17, 2009 12:52 PM

How to set up multiple ABS and AppleTV 2

Just got the 5th Gen AEBS. But now I've been reading too much and getting all confused.
AEBS 5th g (not connected yet)
Express "n" (main wifi router, located in bedroom with modem)
Express "g" (in the kitchen for AirPlay speakers)
Express "g" (in the garage for Airplay speakers)
AppleTV 2 (in the bedroom close to the Express "n")
The Express "n" range has been fine, so I don't think I need to "extend" the network.
I'd like to have my media and Time Machine drives connected to the new AEBS which both Macs could share
I THINK I'd get better AppleTV streaming if the AppleTV was hardwired to the new AEBS, Is that correct?
We also have ipads and iphones so I think that dual band is necessary.
Please tell me the best way to set this all up.
Thanks,
Stewart

Well first off if you can hardwire the Apple TV definitely do it, ethernet is always better then wireless. Your wireless network is actually running at "g" speeds do to the 802.11g expresses connected to it. The 802.11n express is not simultaneous dualband so it must downgrade to 2.4 ghz. You'll want to configure the extreme as you normally would a main router, you can also setup a specific 5ghz network SSID for the computers to connect to. This is found within manual setup in airport utility within the wireless option section of the wireless tab. You can connect an externally powered USB hub to the extreme to share multiple drives, most USB powered portable externals do not work however as neither the extreme nor the hub's can power them enough to operate properly.

How do set up multiple devices with multiple graphs in labview

Hello,
I am new at LabView, and we are trying to setup a test rig to measure voltage, pressure and flow rates. We are currently using a NI-6009USB box and Labview version 8.2. Our problem lies in setting up the actual measurements on separate graphs. How do i go about setting up the daq-assistant to measure mulitple devices, and graph them on their own graphs? We also need to know how to program in when measuring flow, how to convert it from square wave form to a calibrated curve?
Any help would be greatly appreciated!
Nate

When you configure the DAQ Assistant, you will be first asked to select the measurement type. Assuming that you have voltage sensors because you have the 6009, you select Analog Input>Voltage. You then get a list of devices. Since you only have one, it should be listed as Dev1. Expand that and then pick the channels you have connected to the sensors. Just like it says at the bottom of the of the channel window, you can select multiple channels with <CTL> or <SHIFT> click. After you've done that, the next window is where you select your sample rate, number of samples, etc. You can also select a custom scale for each channel. This is where you would enter any formula you have from the sensor vendor in order to convert a voltage reading to scaled units.
The output of the DAQ Assistant is a dynamic data type. You can wire this to a single graph to display all readings together or use the Split Signals function to break out individual channels for separate graphs.
Message Edited by Dennis Knutson on 02-22-2007 03:33 PM
Attachments:
Split Signals.PNG ‏4 KB

Setting up multiple speakers w/ Airport 802.11g/n

Hello..
I updated my Airport Express to the 802.11g/n model over the holidays and has set up a pair of wireless speakers via Airtunes.
I kept the older (pre 802.11g/n) AE as I was told that I could still hook up speakers to it via Airtunes.
So here is where I got stumped while setting the 2nd set speakers. I plug my older AE into the wall and the audio cable (from the 2nd set of speakers)
into the AE audio in port.
How do I get the wireless signal from the newer AE to read the older AE (where the 2nd set of speakers are plugged into) to channel music into a different
area of the home? I have a large studio size apt. with minimal interference.
Do I need to have another DSL line to run into the older AE so I can get the wireless signal to work for the 2nd set of speakers?
For some reason, I'm thinking this isn't necessary since I already have a wireless signal coming from the newer AE.
Any ideas as to what I may be missing here?
thanks as always in advance! ~A~

Atcandela wrote:
So if I understand correctly, I would still plug in the older AE & audio cable, but have to set it up in
"client mode"?
Yes.
... My concern is that I won't be able to
to set up the older AE using the newer Airport Utility.
I'm guessing you've tested this before?
Yes. To administer your original Express, use AirPort Utility 5.6. It is compatible with Lion as well as Mountain Lion, however, the installer app will refuse to install it on Mountain Lion.
This dilemma is easily solved though. You simply need to extract the app from the installer package using a package extractor like Pacifist.
Download Pacifist here: http://www.charlessoft.com/
Download AirPort Utility 5.6 here: http://support.apple.com/kb/DL1482
If you happen to have an archived copy of the AU 5.6 app somewhere, such as a Time Machine backup or equivalent, you can simply restore it or drag the app to your Mountain Lion system's Utilities folder. It will run without complaint. It is only the package installer that is the problem.
Mountain Lion will not allow you to delete its existing version of AirPort Utility. Just ignore it. It and the older version (which will bear the unique name "AirPort Utility 5.6") can peacefully coexist.
Note: For those with Leopard or Snow Leopard systems you need AirPort Utility 5.6.1 (this is confusing - a later AirPort Utility version for an earlier OS X version - but it is correct).
Download AirPort Utility 5.6.1 here: http://support.apple.com/kb/DL1536

How to set up iHM79 speakers with airport express?

I've got the green light on the express.. i can see it fine in airport utility. I've told iTunes to play thru the express. But the express does not seem to realize it has speakers attached to it. All i did was plug the speakers into teh express. I notice that in airport utility, it wants to know the name of the speakers. Well, near as i can tell, the speakers don't have a name, and there are very few directions that came with them, so i am lost.
How do i tell the express that it's got speakers attached so that i can play music thru them wirelessly?

William Boyd, Jr. wrote:
Jo Dorais wrote:
the express does not seem to realize it has speakers attached to it. All i did was plug the speakers into the express. I notice that in airport utility, it wants to know the name of the speakers.
You can use AirPort Utility (in the Music panel) to give the speakers a name. That can be useful if you have more than one set of speakers attached to separate AirPort Express units so that you can distinguish between them in iTunes.
I can't find a way to name the speakers.. it just asks me what the name of the speakers i want to use is.
How do i tell the express that it's got speakers attached so that i can play music thru them wirelessly?
Can you see the speakers in iTunes? One thing you may have forgotten to do is to check "Enable AirTunes" in that same Music panel of AirPort Utility.
I had that done, but it didn't matter. I could see the express in iTunes, but not the speakers specifically.
However, i have gotten it all to work by starting over. I ran across a tutorial here, telling me to plug the speakers into the express and THEN plugging the express into the wall, and then setting the express up with airport utility. So i restored it to default factory settings at that point and started from scratch. Voila! I still don't see names for the speakers, but they play music, so i'm not arguing.
Now I've left my daughter to figure out where to find the app for her iPod Touch to remotely control things.

How to set up multiple speakers

Similar Messages

Maybe you are looking for