How to set up multiple ABS and AppleTV 2

Just got the 5th Gen AEBS. But now I've been reading too much and getting all confused.
AEBS 5th g (not connected yet)
Express "n" (main wifi router, located in bedroom with modem)
Express "g" (in the kitchen for AirPlay speakers)
Express "g" (in the garage for Airplay speakers)
AppleTV 2 (in the bedroom close to the Express "n")
The Express "n" range has been fine, so I don't think I need to "extend" the network.
I'd like to have my media and Time Machine drives connected to the new AEBS which both Macs could share
I THINK I'd get better AppleTV streaming if the AppleTV was hardwired to the new AEBS, Is that correct?
We also have ipads and iphones so I think that dual band is necessary.
Please tell me the best way to set this all up.
Thanks,
Stewart

Well first off if you can hardwire the Apple TV definitely do it, ethernet is always better then wireless. Your wireless network is actually running at "g" speeds do to the 802.11g expresses connected to it. The 802.11n express is not simultaneous dualband so it must downgrade to 2.4 ghz. You'll want to configure the extreme as you normally would a main router, you can also setup a specific 5ghz network SSID for the computers to connect to. This is found within manual setup in airport utility within the wireless option section of the wireless tab. You can connect an externally powered USB hub to the extreme to share multiple drives, most USB powered portable externals do not work however as neither the extreme nor the hub's can power them enough to operate properly.

Similar Messages

How we set up multiple websites on OSX Server

BACKGROUND
After fiddling and futzing around for weeks (actually since last year) I've finally figured out how to set up multiple websites (virtual sites) using one port and one IP address. While there seems to be lots of discussion on this topic, it seems that the basic assumption is that one knows everything about websites, DNS and all that stuff, which I do not.
When our network was originally established the engineer set up a wiki and also configured webmail, so we had two sites, one secured for mail and the other open for Calendar and the wiki. We were not hosting any websites locally because our school website is hosted by a company in New England.
This year I wanted to set up websites for teachers and students. As great as the wiki is, there are some things it just can't do as well as a website. So I figured if I set up the sites teachers could link back and forth from one to the other. In addition kids could now start to use a real website instead of the cobbled together file mess I had when we ran a Windows network. Also iWeb is a much more accessible tool than FrontPage.
SERVER SIDE:
Snow Leopard Server - 10.6.4
There are two - actually three pieces if you want your iWeb clients to connect to the server: Server Side Web Services, DNS and, in my case, FTP.
================================================ SERVER SIDE - WEB SERVICES
If you haven't turned on Web services, you'll need to open Server Admin and do that. If you don't know how to set up web services - just reply and I'll step you through that as well.
Once web services are set up and turned on, you'll see it listed under your server’s name in the Server Admin sidebar. Click on "Web" and then click on the "Sites" tab at the top of page. This is where you list all your sites.
Click the plus button and enter the fully qualified name of your site, for example: "students.myschool.org". Don't use the defaults here (no name) - that's what got me in trouble before. BE SPECIFIC!
You'll be looking at the "General" tab (the other tabs, "Options", "Realms", etc. we'll deal with in a second).
On the "General Tab", the default IP address ("any") and port (80) is just fine. We'll run everything over port 80. (Apache figures all the virtual site stuff out - you don't need your rocket science degree for that.)
"Web Folder:" is important because this is how you'll "segment" your websites. While I would NEVER do this again, we have a solid state hard drive for the OS and a RAID array for our data files. IF you have that, make sure you do NOT use the default "Web Folder" because it will store all your files on your solid state drive. There may not be enough room, over time, on that drive. I've not experienced it yet, but it's my understanding that if the drive fills up, the server shuts down.
I store my web sites on a folder on the RAID array.
Everything else on that tab can be left as the default. (Just make sure that you have an "index.html" or "index.php" file in your web folder root, but iWeb will take care of that for you.)
I would put in your email address in the "Administrator Email:" field.
Under "Options" you really don't have to put anything. I've tested making websites with iWeb and it doesn't appear that anything needs to be checked.
Nothing needs to be entered in "Realms" as well from what I see working w/ iWeb.
The defaults in "Logging" are fine.
You can leave "Security" alone, but we do have a (self-issued) certificate listed for our webmail site.
"Aliases" is important. Under "Web Server Aliases" you enter how you want the site to respond to when users type in a URL in their web browsers.
When our web server was initially set up the engineer set up "wiki.myschool.org" on port 80 and "mail.myschool.org" on port 443. In the aliases section was nothing but a "*" (the wildcard character). That means, from what I can figure out, that the webserver will respond to these sites regardless of what is typed in the URL. (Well, something like that - point is, if you create OTHER websites, you'll NEVER get to them because the wildcard character in the "Aliases" section, in effect, grabs those web requests and redirects them to the sites that are already there.
In my case I deleted both of those wild card characters. For my "wiki.myschool.org" site, I entered "mail.myschool.org". That means if you type EITHER "wiki." or "mail.", go to the site that’s stored in the “Web Folder” we set up when those sites were created.
For "mail.myschool.org" I just DELETED the wildcard character. I wanted that site (since it was secured) only to respond to "mail." - nothing else. (You're not going to that secured site for any other reason than to get your mail.)
"Proxy" can be left blank. Have no idea what that does. As time permits I'll do some research and figure out what it's used for.
"Web Services" is if you want to provide any MORE services to this particular site. Most likely you'll want to uncheck all the boxes. For our "wiki." site, we have checked "Wikis", "Blogs", and "Calendar". For our "mail." site we have those checked PLUS "Mail".
I would create a separate "Web Folder" for each of your sites. I don't know if that's a requirement but for housekeeping purposes, I would keep the sites separated. And I SUSPECT that it's "best practice" to separate your wiki from your other websites.
SERVER SIDE - DNS
OK...now you have to make your site reachable and the only way to do that is to set up DNS so that folks don't need to type in the IP address of your web server. You need to set up DNS inside your network and, if you want folks in the outside world to reach your website, you'll need to set up an external DNS as well. I'm going to cover INTERNAL DNS - if you don't know how to set up EXTERNAL DNS - reply or email me and I'll post those instructions.
Most likely you have already created Zones for you network...all you really need to do is create "Aliases" so that when you type "students.myschool.org" your web browser will know that site resides on IP address XXX.XXX.XXX.XXX.
If you've set up Zones then you already have a "Machine" setting that translates your server’s name to an IP address and vice versa.
All you need to do is create an "Alias" (CNAME) record for, in this case, "students". You’ll see the choices for types of records when you click the "Add Record" button.
There are only two fields to configure for a record: "Alias Name" - in this case "students" and "Destination" - in this case "servername.myschool.org". (You've already entered a machine record that says "servername" = 192.168.1.x.)
That's it for Internal DNS.
SERVER SIDE - FTP
Now you have to get iWeb to communicate with the webserver.
There are only three ways iWeb will communicate with webservers: MobileMe, Local Folder and FTP Server.
Local Folder is really only practical if you want to host a website on a laptop (I was blown away initially when I found out that all Macs had a built-in web server - how neat is that?). I think there are some very cool things teachers could do with configuration, and, of course, you wouldn't need to set up any web services on the web server, but that's for another discussion. You need to set up FTP services on the web server.
Turn on and enable FTP on your webserver.
You can leave the defaults for "General", "Messages" and "Logging". "Advanced" is the only thing you want to set. I set "Authenticated Users See:" to "Home Folder Only". I set the "FTP Root" to the same root folder in which I plan to store my web sites (/VOLUMES/RAID Array/WebServer/Documents). This setting sets that folder only to be accessible via FTP.
I would suggest returning to your DNS settings and adding one more "Alias". Set "ftp." to point to your webserver. Why? So folks can edit their sites from home (see below).
CAVEAT: If you are running FTP on other servers, make sure that the settings here do not conflict with the settings on the other servers. For example, I'm running FTP on my file server so that my scanners can communicate with it. However, I configure my FTP settings by machine name and NOT "ftp.myschool.org".
================================================
CLIENT SIDE - CONFIGURING iWEB
Now you have to configure iWeb so that it will communicate with your server.
Click on the "Site" icon so that "Site Publishing Settings" appears.
Publishing:
"Publish to:" = "FTP Server"
You can set the "Site name:" and "Contact email:" to whatever you want. But see below!
FTP Server Settings:
"Server address"=ftp.myschool.org (you could also enter in servername.myschool.org or the IP address. However, if you want folks to be able to work on the site from home, you will need to configure external DNS for that. If you use the IP address, you're out of luck for remote access to the site. (You can do it but it's beyond the scope of this discussion.)
"Username" & "Password" should be your user's network login credentials.
"Directory/Path" - this is important. Remember, you set your "FTP Root" to be "/VOLUMES/RAID Array/WebServer/Documents". If you leave this field blank then the website will be dumped into this folder. If you are only setting up one site, that may be OK. However I wanted to set up a "students" site folder, a "faculty" site folder and a separate site for our literary magazine.
THEREFORE: I have, in my ..../Documents folder (on the server), a "students" folder, a "faculty" folder, and a "litmag" folder.
SO...in my "Directory/Path:" field, I have "/faculty". That means the full path to this website is "ftp root/faculty" or "/VOLUMES/RAID Array/WebServer/Documents/faculty" (You don't need a trailing "/" character. iWeb will automatically append the folder for you user depending on what you entered in "Site Name:" in the "Publishing" area.
Website URL:
This is the root website depending on whether it is "students" or "faculty". Since iWeb will append the site name to this root website, I accomplished what I hoped to accomplish in this post (http://discussions.apple.com/message.jspa?messageID=12288561#12288561).
Faculty sites will be @ http://faculty.myschool.org/username. Students @ http://students.myschool.org/username. PERFECT!
iWeb is such a GREAT tool - NOW the kids can start using it!
I want to reiterate that this works for our school but it should work for you as well. There may be better ways to do this but it works for us.
Hope this has been helpful and you won't have to spend weeks trying to figure this all out by yourself!

OK...here's how we did it.
To get access to the website you created from outside your network there are a couple of steps.
First, you have to have a STATIC IP address from your ISP. If you have a T1 circuit, no problem...you usually get a couple of static IPs you can use. However, if you have a cable modem circuit, most likely you have a dynamic IP address which changes when you connect to the internet. Usually a static IP will cost a bit more because the ISP has to go through a couple of steps to set it up for you. But once you have the address, you now have a way for folks outside your network to connect with you.
(I’m also assuming that you use a router of some sort through which traffic flows out to the internet and that you aren’t using connection sharing or something like that.)
The next thing you need to do is have your new static IP address associated with the server on which you are hosting your website. You've probably already done that if your website works inside your network. However, you've associated a private ip (192.168.x.x, etc.) to your web server. That doesn't mean anything to folks on the outside because private IP addresses are just that - private - folks can't access them. (I won't get into VPN because that's a whole other topic.)
The way you associate your new static IP address to your web server is through some sort of dns application from your ISP. For example, we use TierraNet to manage our external DNS information. They have a web interface control panel that is very similar to the DNS interface for XServer. You can create CNAME records (aliases - other ways that folks can access your servers).
Basically you create an "A" (CNAME) record with a fully qualified domain name (e.g. webserver.myschool.org) and point it to your public IP address (XXX.XXX.XXX.XXX) which you just got from your ISP. It's going to take a while (24-48 hours) for this change to take effect. BTW, you can create as many “A” records as you want. For example mail.myschool.com and wiki.myschool.com could point to the same place.
You want to make sure that the fully qualified domain name you enter in the external dns utility matches the name you used when you created your internal dns records on your XServer.
OK...so now folks can get to your domain - but, remember, you have a private network IP scheme between them and you. You now have to tell your router that when web traffic arrives, allow it inside the network and direct it to your web server.
Let's say your public IP address is 205.100.112.50 and your web server is 192.168.0.5.
You have to create, in your router’s "Security Zone" (router companies call them different things) a couple of rules. Usually the first rule is: "Let everything inside the network get out to the web." You've probably already done that if folks inside the network can reach the internet.
You then have to tell the router to allow web traffic (port 80) into your network AND redirect that traffic to 192.168.0.5.
We use AdTran routers and they have a web interface which allows you to write "rules" affecting public and private traffic. Public is folks outside the network, private is folks inside.
AdTran calls them "Security Zones" and you modify those zones with policies.
So my "Policy" would say, in the above example, redirect traffic from my public IP (205.100.112.50) -> to my web server -> (192.168.0.5).
THEN you have to modify this policy with what AdTran calls "Traffic Selectors". You've said, OK, you can get in, but WHAT can get in?
The "Traffic Selector" is written to say: "Permit" "TCP" traffic from 205.100.112.50 only through Port 80. (That's the port that web traffic goes over. If you wanted a secure website, you'd add another traffic selector that opens port 443, for example.)
I'll tell you I'm no genius when it comes to this. I called AdTran and had them configure my router for me. I told them what I wanted done, they remoted into the router and configured it. But then I could go to the web interface and see what they did and then added rules later on when I wanted, for example, to get access to the network via Apple Remote Desktop or VPN into the network on my iPad.
I'd bet that your router has a maintenance agreement that includes this service and if it doesn't it should have.
I did find that I still had issues when I tried to set this up originally and it had to do with the ORDER of the policies. I can’t remember exactly what the issue was, but, effectively one of the policies highjacked traffic before the policy that I wanted got triggered. Simply moving them around in the list fixed that issue. So if you have this set up but still can’t access the site, check the order of your rules.
I don’t know if that helps or not, but I try to think about this stuff conceptually and then get someone to help me with the details. I work with this stuff so infrequently that I forgot how I did something 6 months or a year ago. I’m in the process of creating a wiki for the school which documents all this stuff, but that’s a major undertaking.
Cheers,
John

How do i manage multiple users and devices with one apple id without everything showing up on every device?

how do i manage multiple users and devices with one apple id without everything showing up on every device?

How to use multiple iPhone, iPad, or iPod devices with one computer

How can I have multiple accounts and only one library

How can I have multiple accounts and only one library that all the purchased items feed into?

ask your wireless provider.

How do I process multiple files and turn them from raw to jpeg

How do I process multiple files and turn them from raw to jpeg. Ive tried and it seems to go through the files but doesnt seem to process them or store them in the selected folder

Yes that was the first thing I did. Then I used the process multiple files and selected a new folder to put them in and selected use open files and selected to turn them into jpeg. The images flash on the screen like they are being processed, but the folder never appears in library. Is it possible because there are a couple 16 bit files open that this corrupts the task. Do I need to create the folder first. Will elements not create the folder on its own.
Thanks Vince

How to set value for trim and bleed using jsx script?

I have tried using bleedoffsetRect but somehow it is not working. Can anybody please help me on how to set value for trim and bleed using jsx script? Any example will be highly appreciated.
Following is the code I am trying with:
var _saveName = new File ( root_path +_strFileName+".pdf");
    var _saveOpts = new PDFSaveOptions();
    _saveOpts.printerResolution = 300;
    var bleedarray = new Array();
     bleedarray[0] =9.00;
     bleedarray[1]=9.00;
     bleedarray[2]=9.00;
     bleedarray[3]=9.00;
    _saveOpts.bleedOffsetRect = bleedarray;

I would expect although I've not actually tried this for the bleed off set box to be larger than the artbaord and the first two values to be negative or 0…
var bleedarray = new Array(-9,-9,artboard.width+9,artboard.height+9);
Where 'artboard.width' & 'artboard.height' you will have calculated from your file. An Array(9,9,9,9); would not constitute any boxes bounds.

How to set a minimum width and height for a stage or scene?

Hello,
Does anyone how to set a minimum width and height for a stage or scene?
I tried listening for width/height property value changes and then adjust the width/height if necessary, but that causes unpleasant flickering of the window.
In JavaFX 2.1 beta SDK for Mac OS, the Stage class has setMinWidth() and setMinHeight() functions which work very well.
I'm wondering what's the equivalent way to do that when using the FX SDK for Windows.
Any help is appreciated!
Thanks.

I was wondering how to enforce a minimum stage size with JavaFX 2.0.3.The same flickering way you are currently doing it. See: http://javafx-jira.kenai.com/browse/RT-15200 "Need a way to set the minimum size of a window"

Need help: Flex record webcam problem, how to setting Brightness,Contrast,Saturation and Sharpness

Hello, dear all
Please help me!
Flex record webcam problem, how to setting Brightness,Contrast,Saturation and Sharpness?
nsOutGoing=new NetStream(nc);
nsOutGoing.attachCamera(m_camera);
nsOutGoing.publish(filename, "record");
I want to control the Brightness,Contrast,Saturation and Sharpness for the recorded flv file.
At present, I only can control the videodisplay object, but I can not able to control Camera.
Thanks very much!!
kimi
MSN: [email protected]

Can I change a Video object to to Camera object, If yes, How do??
nsOutGoing.attachCamera(video as Camera);// it does not work rightly
thanks

I recently set up multiple accounts and when I was trying to figure out how to share files I messed up something in my documents. Everytime I open a doc from the ADMIN account, a box pops up that says "The file is not in the correct format" how to fix?

I recently set up multiple accounts on my imac, When I was trying to figure out how to share the documents I must have done something wrong. When logged into the Admin account, I open up any document and I get a message box that says, "The Document could not be opened. The file isn't in the correct format. The file might be corrupted, truncated, or in an unexpected format." What did I do and how do I fix it?

Without knowing what you did it is impossible to give advice on how to correct it.
If these were files you copied over from some other system then just Re-Copy them replacing the ones that are corrupted.
Other then that I suggest you Wipe the drive and start over with a clean reinstall of the OS and programs. Then if you want to share files to All Accounts place those files in a folder in the ROOT of the drive.

How to set up multiple NLS_LANG or update the NLS_LANG in windows registry

Hi!
In our server machine, we have installed the Oracle Net Manager Version 10.2.0.0.0, which is used to connect to different oracle databases in different NLS_LANG settings (i.e., JA16SJIS, KO16KSC5601, WE8ISO8859P1). Currently, our NLS_LANG is set to "AMERICAN_AMERICA.UTF8". In order not to convert the character set to UTF-8 format, could anyone tell me:
1. how to set multiple NLS_LANG for different databases in registry
2. how to switch the NLS_LANG setting in registry programmatically in order to retrieve/view the data in the corresponding character set (same as the setting in Oracle DB) for the dedicated oracle database
Please advise. Thanks a lot
Best Regards
Pinga

1. how to set multiple NLS_LANG for different databases in registryBy default NLS_LANG registry settings is linked to the Oracle home and not to the database. I don't think that you can set a NLS_LANG setting for each database (unless you are using a command line tool and in this case you can set the NLS_LANG environment variable).
See also OTN NLS_LANG FAQ.

How to set up multiple devices

We have 2 iPads, 1 work and 1 personal. We also have an iMac. I have been struggling with how to set up my the devices. Right now all are on one Apple ID. I want to be able to use Face Time, message etc and I have no clue if I should use multiple IDs or if I can have 1 with multiple email...so far I have had no luck with Facetime

How to use multiple iPods, iPads, or iPhones with one computer

How to set a Multiple condition in a single CFL

Hi everyone,
Hey guys, i have a problem filtering a CFL (ChooseFromList)
where i have to select records
WHERE U_SalesmanCode = <ConVal>
AND U_Status = <ConVal>
So i've come up with an idea setting up multiple conditions on a single CFL.
i have a function "SetCFLConditions" that will be called after the CHOOSEFROMLIST_EVENT was triggered. this will set the conditions on a loop method.
the CODE works fine. but it only accepts the last condition.
Public Sub SetCFLConditions(ByVal _chooseFromList As String, _
                                ByVal _alias As String, _
                                ByVal _operation As SAPbouiCOM.BoConditionOperation, _
                                ByVal _condVal As String)
        Dim oCFLCollection As SAPbouiCOM.ChooseFromListCollection = _form.ChooseFromLists
        Dim oCFL As SAPbouiCOM.ChooseFromList = oCFLCollection.Item(_chooseFromList)
        Dim oCons As SAPbouiCOM.Conditions
        Dim oCon As SAPbouiCOM.Condition
        Dim asAlias() As String = _alias.ToString.Split(",")
        Dim asCondVal() As String = _condVal.ToString.Split(",")
        Dim i As Int16
        oCFL.SetConditions(Nothing)
        'oCons = oCFL.GetConditions()
        For i = 0 To asAlias.Length - 1
            oCons = oCFL.GetConditions()
            oCon = oCons.Add
            '//LOOP CONDITIONS
            With oCon
                .Alias = asAlias(i)
                .Operation = _operation
                .CondVal = asCondVal(i)
            End With
        Next i
        oCFL.SetConditions(oCons)
    End Sub
Pls. Help
Thanks
Roger

Hi,
This is how i add the conditions..
Dim oCFLS As SAPbouiCOM.ChooseFromListCollection
Dim oCons As SAPbouiCOM.Conditions
Dim oCon As SAPbouiCOM.Condition
Dim oCFL As SAPbouiCOM.ChooseFromList
Dim oCFLCreationParams As SAPbouiCOM.ChooseFromListCreationParams
oCFLS = objForm.ChooseFromLists
oCFLCreationParams = objSBOAPI.CreateUIObjectSAPbouiCOM.BoCreatableObjectType.cot_ChooseFromListCreationParams)
oCFLCreationParams.MultiSelection = False
oCFLCreationParams.ObjectType = "2"
oCFLCreationParams.UniqueID = "CFL1"
oCFL = oCFLS.Add(oCFLCreationParams)
oCFLCreationParams.ObjectType = "2"
oCFLCreationParams.UniqueID = "CFL2"
oCFL = oCFLS.Add(oCFLCreationParams)
oCons = objForm.ChooseFromLists.Item("CFL1").GetConditions
oCon = oCons.Add()
oCon.Alias = "CardType"
oCon.Operation = SAPbouiCOM.BoConditionOperation.co_EQUAL
oCon.CondVal = "C"
objForm.ChooseFromLists.Item("CFL1").SetConditions(oCons)
objForm.ChooseFromLists.Item("CFL2").SetConditions(oCons)
Hope it helps,
Vasu Natari.

How to set up user account and share folders

We are a family of four sharing our first iMac. I would like to set up one account for my wife and I and one account for my kids on which I plan to enable Parental Controls.
I have struggled with setting up my kids user account. After setting up a Standard account for the kids - I noticed none of our music or files were visible in the kids accounts. I spent 20 min on the phone with Apple and the tech was clueless. He had me copying my music folder all over the computer until I had about 6 copies of the same folder. I did figure out how to move the music library to SHARED folder and redirect iTunes source folder to the same shared folder.
My problem now - when I copy my documents to the SHARED folder my kids can see the files and open them, but they can not save them. How do I give the kids account read write privileges?
Should I set up a GROUP account instead?
I need the best way to have two or three users who can access all data on the same iMac, while giving me the ability to enable Parental Controls on the accounts.

Do this:
Here's how to set it up by using ACLs:
1. Create a new folder in /Users/Shared. Call it "Sharefolder".
2. Log in to an Admin account, open Terminal and paste in all of this at the same time:
chmod -R +a "everyone allow delete,chown,list,search,add_file,\
addsubdirectory,delete_child,file_inherit,directoryinherit" \
/Users/Shared/Sharefolder
That will automatically make everything copied or created to the sharefolder writable by all users. Note: After setting this up, if you have existing files that you want to move to the sharefolder, hold down the option key when dragging them in. That will make new copies of them in the sharefolder. Dragging existing files in (i.e. simply moving them there) won't cause the ACL to inherit properly and they won't be writable by all users. Files that are copied or +newly created+ in the sharefolder shouldn't have this problem.
Make sure you keep good backups. One user accidentally deleting a shared file will affect everybody else who uses it.

How to set up a FTP and web server and integrate with DMM 5.2

Hi All ...
I need to set up a external server only for content publishing to reduce the overhead of the DMM server .
can anyone guide me on how to set up the external server and intergrate it with the DMM 5.2
Thanks

semuthu,
Notes from the Release Notes:
Compatibility Limitations with Microsoft Internet Information Server (IIS)
DMPs that use firmware release 5.2 are compatible with only one version of Microsoft Internet Information Server.
That supported version is IIS 6.0 for Windows 2003 Enterprise. If you do not have the supported IIS version but
want your DMPs to retrieve assets from a webserver, we recommend that you use Apache instead of IIS.
I would suggest using Apache instead of IIS for the webserver service. IIS can be used as FTP if needed.
There are plenty of Documents on the Web about setting up Apache and FTP for servers.
Using Apache with Microsoft Windows
http://httpd.apache.org/docs/2.0/platform/windows.html
Quick HOWTO : Ch20 : The Apache Web Server
http://www.linuxhomenetworking.com/wiki/index.php/Quick_HOWTO_:_Ch20_:_The_Apache_Web_Server
Once the Webserver is setup and operational. You simply store your media content on the Webserver
and then have your DMS assets in the media library use an external URL address for its location.
If you want to use external server for other features in the DMM, you can can see how to configure
here:
http://www.cisco.com/en/US/partner/docs/video/digital_media_systems/5_x/5_1/dmm/user/guide/dsm+etv.html#wp1073210
Goto the section right below ACNS & WAAS..
If this answers your question, Please take time to mark this
discussion answered & rate the response.
Thank You!
T.

How to set up DEV, TEST and PROD environment?

We have used BI publisher Enterprise (standalone), Oracle BI Publisher 10.1.3.4.1. Our admin set up DEV, TEST and PROD environment based on the folder. For example, there is DEV folder, TEST folder and PROD folder. Developer is developing reports under DEV folder. Under TEST and PROD folder, there are many sub-folder based on the login user role. Sometimes a report has to be assigned to a multiple sub-folder under PROD. So our admin create symbolic links in the Linux box which BI server is located. That way, if a report is updated, there is no need to update the report in all sub-folder.
The issue I have is we are not allowed to touch any files under TEST/PROD folder. Only admin will move the report from DEV folder to TEST/PROD folder because those links admin created might be broken. However, as a developer, we still have permission to delete/rename/copy report under those restricted folders. Yesterday one report under PROD has been renamed by a developer. And admin complains because the links he has created not working anymore. Just wonder if admin doesn't allow developers to touch the reports under those folders, is there a way to remove the write permission on those folders? Also do you think this is a good practice to set up DEV, TESDT and PROD environment? Any input will be greatly appreciated.

We have used BI publisher Enterprise (standalone), Oracle BI Publisher 10.1.3.4.1. Our admin set up DEV, TEST and PROD environment based on the folder. For example, there is DEV folder, TEST folder and PROD folder. Developer is developing reports under DEV folder. Under TEST and PROD folder, there are many sub-folder based on the login user role. Sometimes a report has to be assigned to a multiple sub-folder under PROD. So our admin create symbolic links in the Linux box which BI server is located. That way, if a report is updated, there is no need to update the report in all sub-folder.
The issue I have is we are not allowed to touch any files under TEST/PROD folder. Only admin will move the report from DEV folder to TEST/PROD folder because those links admin created might be broken. However, as a developer, we still have permission to delete/rename/copy report under those restricted folders. Yesterday one report under PROD has been renamed by a developer. And admin complains because the links he has created not working anymore. Just wonder if admin doesn't allow developers to touch the reports under those folders, is there a way to remove the write permission on those folders? Also do you think this is a good practice to set up DEV, TESDT and PROD environment? Any input will be greatly appreciated.

How to set up multiple ABS and AppleTV 2

Similar Messages

Maybe you are looking for