How to set up Open Gl Application in C using Xcode

i am trying to work for University Project in Xcode. Xcode always rocks my work but sometimes i probably unaware of its features i get problems like today i am having a problem in creating an application in C++ in which i have to use graphics. i dont know how to create and even setup an Open GL Applciation in Xcode 4.6 please need help.....

If this is for iOS, have you reviewed the information here? Documentation, sample code, etc. There is probably a similar page for OS X.
iOS Dev Center - OpenGL ES Resources
https://developer.apple.com/devcenter/ios/resources/opengl-es/

Similar Messages

How can i change the default application that Lion uses to open a document?

how can i change the default application that Lion uses to open a document?

Right-click on the document, select Get Info... In the lower half of the tall window that opens is a section labeled Open With (you may need to click on the disclosure triangle to see detail). Select from the pop-up list which app should open this document. If you want that to become the default condition, click on the Change All... button.

How to set my own gui status when i use selection-screen

how to set my own gui status when i use selection-screen command
and
how to set the names in the application tool bar when function keys are created

Make sure that you do this in event "AT SELECTION-SCREEN OUTPUT".
Run Txn ABAPDOCU and check 'DEMO_SEL_SCREEN_STATUS' for sample.
Also check out following discussion -
Selection Screen PF-STATUS
Cheers,
Sanjeev

Could anyone please let me know how to set a ICC profile with Acrobat dlls using Csharp or VB

Could anyone please let me know how to set a ICC profile with Acrobat dlls using Csharp or VB

Cant we even use the dlls in an application?
In order to automate Acrobat, you need to have Acrobat installed. There is
nothing you can do with just the DLLs. As was already stated, Acrobat is
not licensed for use on a server, but regardless of that, it's also
not technically suitable for server use. You need to find a solution
outside of Acrobat to solve your problem.
It also seems that you don't have a good understanding of what is going in
inside a PDF file. PDF is a very complex file format, and based on
your questions
and followup questions, you need to spend a considerable amount of time
getting familiar with the PDF file format to understand how color works in
the PDF context. Reader the PDF spec, while paying special attention to the
section about color. You will find out that if you want to convert the
color space of a "PDF file", you actually need to convert the color space
associated with every single object in your PDF file. That is fairly simple
for vector graphic and text, but when it comes to images, you may have to
convert the image data. Once you have a good understanding of what it is
you need to do within the PDF file, then you can start looking for tools
that allow you to do that. Again, Acrobat and therefore the Acrobat SDK is
not suitable for this task. If you want to stay with Adobe products take a
serious look at the PDF Library, which his licensed through Datalogics (
http://www.datalogics.com/products/pdf/pdflibrary/). As you've mentioned,
there are other, non-Adobe PDF libraries that you can also use, but this is
the Acrobat SDK forum, so I won't discuss any of those 3rd party solutions.
You are wasting your time while looking for a simple solution that does not
exist.

How to Set Default Open With?

Bridge keeps opening my .png screen shot files with Fireworks, I want them to open in Photoshop — CS4.
The .png file icons defaults are set to open with Ps.
Bridge> Preferences> File Type Associations don't even list .png (if that is the place to do it).
Forum search seems to be hitting on everything but what I am typing in.
Bridge Help doesn't understand what I am asking.

Same issue - when I double click a "RW2" file in Bridge my Photomatix application opens the file. Nowhere in the file associations do I see Photomatix or the "RW2" file format for that matter. I reset to default association - still no joy. The only app showing in the "Open With" pull down in Bridge is "Photomatix (default)". How so I change this default to PS4?

How to set up open&close posting period to process year-end at April

Hi FICO GURUs,
I m a new student in FICO, here i have a question as following, ask for help,
For the open period. If we need to clearing till April, how do we do for that? How to set up in open and close posting period?
Any responses will be awarded.
Thanks a lot!
Samson

In OB52 you need to manage open periods related to FI. Any periods which are not managed here implies those periods are closed
Ex: From Period Year To Period Year
04 2008 04 20008
This means 4th Period of 2008 is open and all other periods are closed.
Also you can open and close period seperately for General Ledger and Subledgers
Types A,D,K,M are subledgers and S type is for ledger.
There will be seperate open and close periods for FI,MM and CO modules
FI- OB52
CO-OKP1
MM- MMPV
Assign Points if useful
Regards
Raghu Ram

How to set file opening preference in OS 10.5

I have around 1500 Census files which are JPEGS, and they opened nicely with Preview. Today, I loaded most of iLife (iPhoto, iMovie, iDVD and iWeb). Now, for some reason, every one of those files wants to be opened with Adobe Illustrator which is far from optimal for viewing them. Preview is not even recognized now by the operating system as a means of opening JPEGS, and it refuses to open them even though it is open and running.
Is it possible somewhere in the operating system to specify what piece of software has a preference to open a certain type of file? All of those files which once has as their opening preference Preview have now been converted to Adobe Illustrator.
Thanks for any suggestions.

Kappy, that did not work. I did a Google search on the subject and learned about an app called RCDefaultApp. I downloaded that and placed it in my Library file as directed. I then closed System Preferences and reopened it. The app showed up on the far left of the "Other" line of System Preferences.
This let me set default apps for each "extension." Sure enough, Illustrator was set to open jpeg, jpg, JPG, JPEG and PNG files. I changed all of them to Preview. Well, it still didn't work. Even though Preview was open and actually allowing me to view one of these files, it would not let me open another one of them.
About ready to tear my hair out, I decided if all else fails restart the computer. That fixed the problem. It appears the opening preferences got returned to their original values. The files now open with Preview.
Interestingly, when I started installing iLife, there was a warning that I would have to restart my computer when the software was loaded. I omitted GarageBand which I don't need. There was never any alert that the software was loaded and I should restart my computer. So, I didn't. Maybe some corruption crept in as a result.
While at it, I also went into Finder preferences and checked the block under Advanced to show all extensions. Quite a few of those census files had none, and they do now.
Preview is working now and is opening all those files. I also tried two small PNGs which I trashed because they would not open, and they work, too. Happiness!!

How to set password for every application

Hi,
As a administrator how to set password for every weblication in sharepoint 2013.
Is there any way to set?
Thanks,

Who's password are you trying to set? Please provide more details.

How to set the value of application item using pl/sql in application process

Hi guys,
I want a global variable (application item) whose value will be set at the start when a user logs in to the application. The value will be retrieved from database using a sql query. I do not know the exact syntax to set the value of application item in application process. Also i want to know in which type of application process should i use to set the value of application item when a user starts a session. The value of application item varies from user to user.
Please help.
I am using apex 4.2
Regards,
Waqas

You can use the application item as bind-variable with its name. ie. your application item is named G_MY_APPLICATION_ITEM, then you can access/set it using :G_MY_APPLICATION_ITEM.
For example
BEGIN
    -- assign like a variable
    :G_MY_APPLICATION_ITEM := 'LARRY';
    -- use in a SQL statement
    SELECT WHATEVER_COLUMN
      INTO :G_MY_APPLICATION_ITEM
      FROM MY_TABLE
     WHERE USERNAME = :APP_USER
END;
Peter

How to set the view HTML source in IE using Notepad to open?

When I want to view the HTML source in IE, Java Web Start is launched instead of Notepad after I install the Java Web Start. How can I change the view source back to using Notepad?

Sorry, a late reply: simply remove (or rename) the JWS Notepad shortcut from your desktop.
It seems that this "lovely" little example application
has taken over IE's "view source" feature by trying to
launch itself in the place of notepad. It would be quite disappointing from the sandbox point-of-view if a JWS application would be able to make such changes without any warning...
It's more like Windows cannot handle two applications with the same name. Just hold down the Windows key, hit R and type "notepad" in the Run dialog and you'll also get the JWS demo -- while typing "notepad.exe" still fires Windows Notepad.
Even more strange: typing "notepad" in a MS-Dos box does not fire the JWS demo, even when you change the current directory to be your desktop, like c:\windows\desktop. However, typing "start notepad" in that specific directory does fire the demo...
Even although in the Windows registry one finds HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Default HTML Editor shows the full path to the Windows notepad.exe, it is simply not using that information. You can't blame that on JWS.
So: simply removing or renaming the shortcut helps you out. Or, even better: put a shortcut named Notepad on your desktop and make it refer to your favorite editor -- c:\program files\accessories\worpad.exe if you don't have anything better -- this will make searching the source code in IE much easier...
Arjan.

How to set Current quota template dropdownto 50 GB using powershell script

In central administrator under Application Management -> Configure quotas and locks we have Current quota template drop down. I want to set drop down value to 50 GB using powershell . Is it possible and it if it possible then How ? Please
let me know
Thanks in Advance
Regards
Subhash

Hi Sub_84,
A quota template consists of storage limit values that specify the maximum amount of data that can be stored in a site collection. When the storage limit is reached, a quota template can also trigger an e-mail alert to the site
collection administrator. You can create a quota template that can be applied to any site collection in the farm. The storage limit applies to the sum of the content sizes for the top-level site and all subsites within the site collection.
You can create quota template using powershell, ojbect module and sharepoint UI.
Create new Quota template using powershell:
$newQuotaTemplate = New-Object Microsoft.SharePoint.Administration.SPQuotaTemplate
$newQuotaTemplate.Name = "New Quota Template"
$newQuotaTemplate.StorageMaximumLevel = (150 * 1024) * 1024
$newQuotaTemplate.StorageWarningLevel = (100 * 1024) * 1024
$newQuotaTemplate.UserCodeMaximumLevel = 300
$newQuotaTemplate.UserCodeWarningLevel = 300
$contentService =[Microsoft.SharePoint.Administration.SPWebService]::ContentService
$contentService.QuotaTemplates.Add($newQuotaTemplate)
$contentService.Update()
Check the link which can guide you how
http://www.c-sharpcorner.com/uploadfile/anavijai/quota-templates-in-sharepoint-2010/
Please mark the Answer and vote me if you think that above solution can help you to resolve the issue

How to set persistent binding for QLA2300 (Sun branded -uses qlc driver)

How to set persistent binding for QLA2300 (Sun branded ) HBA using qlc driver from Sun?
Are there any CLI's for it?
Is it done automatically?
Is there any way by which we can infer that persistent binding is done?
Platform: Solaris 9 on SPARC

Persistent binding is effectively provided by STMS (MPxIO) - is there anything in particular you're wanting to do that STMS doesn't provide?

How to set up remote access on wvc80n without using TZO

Just purchased the WVC80N, but how do you set it up for remote access without using TZO? I can not get TZO to work w/ my Uverse 2wire 3800-hgv-b router. Please help as the uverse customer support has not been helpful with port forwarding either.

Hi, I'm a newbie at this, so pls be patient with my terminology... I want to install 2 or 3 of these cameras in my mother's home, and I will have AT&T DSL service (one dynamic IP address) there with only a modem/wireless router. I want to access the cameras from my laptop or from my Blackberry Tour when I am traveling. Also want to allow access for my other relatives. I do not have another home computer to serve as a WHS, and my laptop is obviously not connected to the internet all of the time. Can I use the DDNS setup with DynDNS to provide access? The instructions that I read seemed to imply that I needed a WHS in order to forward ports, etc. Thanks in advance for your help.. Garry

How to set the value of process variables/payload using a managed bean?

Hello,
Someone can give me an example about how to set the values of a process payload in a managed bean?
thank you!

Try this:
jsf page:
<af:selectOneChoice label="Select Suburb"
requiredMessageDetail="Select a suburb"
valueChangeListener="#{selectOneChoiceBean.onValueChanged}"
validator="#{selectOneChoiceBean.validate}"
unselectedLabel="None" autoSubmit="true"
binding="#{selectOneChoiceBean.selectOneChoice}"
value="#{selectOneChoiceBean.value}">
<f:selectItems value="#{selectOneChoiceBean.selectionList}"/>
</af:selectOneChoice>
backing bean:
public class SelectChoiceBean {
private List<SelectItem> selectionList;
private String value = "B";
private RichSelectOneChoice selectOneChoice;
public SelectChoiceBean() {
initSelectionList();
public void setSelectionList(List<SelectItem> selectionList) {
this.selectionList = selectionList;
public List<SelectItem> getSelectionList() {
return selectionList;
public void onValueChanged(ValueChangeEvent valueChangeEvent) {
System.out.println(valueChangeEvent.getNewValue());
// Add event code here...
public void validate(FacesContext facesContext, UIComponent uIComponent,
Object object) {
// Add event code here...
private void initSelectionList() {
selectionList = new ArrayList<SelectItem>();
selectionList.add(new SelectItem("A", "A label"));
selectionList.add(new SelectItem("B", "B label"));
selectionList.add(new SelectItem("C", "C label"));
public void setValue(String value) {
this.value = value;
public String getValue() {
return value;
public void setSelectOneChoice(RichSelectOneChoice selectOneChoice) {
this.selectOneChoice = selectOneChoice;
public RichSelectOneChoice getSelectOneChoice() {
return selectOneChoice;
}

How to set components aligned in left when we use BorderLayout

Hello All,
How to set the components aligned in the left when we use BorderLayout in a panel.Right now,the components are getting aligned in the center.
Any solutions?
Thanks in advance,
Vijay

By default a JPanel uses a FlowLayout when created and by default a FlowLayout uses center alignment. Read the FlowLayout API to find out how to use left alignment.
Also each individual component has an alignmentX and alignmentY value which is set to 0.5 (center aligned). Some LayoutManagers will take this value into consideration. Read the Component API for more information.
Also, check out this section from the Swing tutorial on "Using Layout Managers":
http://java.sun.com/docs/books/tutorial/uiswing/layout/using.html

How to set up Open Gl Application in C using Xcode

Similar Messages

Maybe you are looking for