How to set up text alerts for contacts

How do you set up ring tones for contacts? Besides going to contacts. I know in the S4 there was a setting under contacts to make text tones different for each contact. How do you set it up?
Thanks

I believe I found it.

Similar Messages

How to set default email address for contact with multiple addresses.

Apologies if this has been asked before, it seems a very basic question but I'm unable to find an answer.
Can a default address be set in Address Book for a contact with multiple addresses? Or if not, which address does it send to "automatically" when this condition exists? I know you can manually select the address you want to use, but what if the contact is added to a group?
Thanks
Denis

Thanks for the reply, buy I have no idea what this means.
I have the same question. I have a contact that has five email addresses. When I add the person to a group, Mail automatically selects one of the addresses, but not the one I want. I need to go back and manually select the correct address. Can't I select one of these addresses as the default to be used all the time?
Apologies for not quite understanding the first reply.

Having different ringtones and text alerts for different contacts

Hi I've had Samsung phones for a while and have recently swapped to an iPhone. Can you assign different ringtones and text alerts for contacts, android have an app called ringolite - is there anything similar on App Store?? Many thanks

You can make your own ringtones text tones from music read http://www.demogeek.com/2009/07/31/how-to-add-custom-ringtones-to-your-iphone/

Middle-of-the-night text alerts for data usage - can I set alerts to email only?

Can't seem to find how to turn OFF text alerts for data overage, but leave email alerts in effect. OR, is there a way to specify WHEN text alerts are sent? Seems every one I've received comes in between 1 and 3 AM EST.

i'm also having major CPU problems w/ FF 29.0.1. when i restart the app it calms down again but after loading tabs it steadily climbs up to 100% after not too long. i have checked out the 2 CPU links/articles above and do all the basic troubleshooting and tips, but with all the FF tools & add-ons isn't there some sort of CPU monitor that has the ability to display which extensions/scripts are hogging the CPU? Activity Monitor on Mac just shows the total used by the app. it's impossible in my case to efficiently disable dozens of add-ons & scripts, restart, and test each one by one b/c it can take several hrs before the CPU starts to spike high again. i have no time for this.
thanks

How do you set up the alert for FaceTime with sound

How do you set up the alert for FaceTime with sound?

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
 Cheers, Tom

How do you set up repeating alerts for a new voicemail

how do you set up repeating alerts for a new voicemail

makblv wrote:
Please, Apple, offer this convenience to your loyal customers. Thank you.
If you want Apple to know how you feel, Submit your feedback directly using the appropriate link on the Feedback page:
http://www.apple.com/feedback

How do I set individual sound alerts for multiple email accounts?

How do I set individual sound alerts for multiple email accounts?

Here: http://www.guidingtech.com/15275/get-different-notifications-per-mail-account-io s-6/
Long and short of it, the settings can be individually changed under Notifications. Select Mail and then the account you want to change the sound to.

How do I set an Audio Alert for Low Battery?

Is there a way to set an audio alert for a very low battery?

there might be an app for that, but there is no built in feature already on the mac like that.

BODS 3.1 : How to trigger an email alert for the jobs on BODS server ?

Hi All.
I have this request.
BODS 3.1 : How to trigger an email alert for the jobs on BODS server ?
We have jobs scheduled on BODS running smoothly and absolutely fine.
But to check, i am logging into the admin console and check for the jobs status.
I would like to have an email to be received from BODS after each job is finished.
It could succuessful. Or it could fail.
Whatsoever, i wish to receive an email alert as soon as a job is finished.
Can anyone advise me as to whether this could be made possible.
And if yes, how this could be done.
Thanks for your help in advance.
In BOE CMC / for webi / schedule / we find an option to send email for a job success or a job failure.
Is there any option similar to that in BODS ?
Also would like to know :
how to use the smtp_to or mail_to functions ?
how to set up the smtp server for this ?
thanks
REgards
indu
Edited by: Indumathy Narayanan on May 31, 2011 3:47 PM

Hi.
Since am new to this BODS. I need some help.
I already have many jobs which are running absolutely fine.
And when a job runs, and finishes, am able to see the trace saying
e.g. :
Job_abc is completed successfully.
We got the smtp service activated for our test server.
and we hae a group email id.
I have put the details of the smtp server / ip address / and said apply restarted.
The i created a simple test script as below :
print (' Before email ' );
smtp_to('abc@company_name.com', 'Job ' || job_name() ||' on ' || host_name() || ' has FAILED',
' the job has failed', 0, 0);
print('After Email ');
It does send a email to as per smtp_to whatever email is specified.
But how to differentiate between a job success
And a job which has failed.
I wish to have a mail which says on the subject :
'Job ' || job_name() ||' on ' || host_name() || ' has completed successfully'
==> IF it is a success
OR
'Job ' || job_name() ||' on ' || host_name() || ' has failed'
==> if it has failed
How to make the system identify, whether
to send a success message or a error message whatever
Could anyone advise.
thanks
indu

How to set a new value for formula field in crystal reports xi?

How to set a new value for formula field in crystal reports xi?//formula{@description} exemplo in VB6crxSubreport.FormulaFields.Item(1).Text = "'Subreport Formula'" orcrxSubreport.FormulaFields.Item("description").Text = "'Subreport Formula'"How to in JRC? 

Hi,
This functionality is known to be very important and is a key part of the next major release of the JRC planned for the first half of 2008.
Regards,
Blair Wheadon
Product Manager, Crystal Reports

HOW TO SET A DEAFULT VALUE FOR A FIELD?

hi friends
i have doubt..how to set a default value for a field..say like in local printer field i always want lp01 to be displayed defaultly..when i click F1 in that field i get the parameter id ..i know there is something dealt with that parameter id..how can i set that default value ..in the case of the default printer value i made in own data settings as lp01 but how to do it normally for other field which has parameter id ??????
thanks and regards
prince

Hi Prince,
u can set the default value in abap as given below
SELECTION-SCREEN: BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN SKIP 1.
PARAMETERS : S_BUKRS TYPE BSID-BUKRS OBLIGATORY DEFAULT '1000'.
PARAMETERS : S_BELNR TYPE BELNR_D OBLIGATORY DEFAULT '1600000070'.
PARAMETERS : S_GJAHR TYPE GJAHR OBLIGATORY DEFAULT '2008'.
PARAMETERS : ASON TYPE BUDAT OBLIGATORY DEFAULT SY-DATUM.
PARAMETERS : S_KUNNR TYPE KUNNR MODIF ID GP1.
PARAMETERS : S_LIFNR TYPE LIFNR MODIF ID GP2.
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN : END OF BLOCK B1.
or
u can give the default value in INITIALIZATION also.
vlue = '1000'.

How do I remove an alert for a calendar item that has long since been deleted? and yet goes off mysteriously, un-deletably, and un-editably every single ****** week !!

How do I remove an alert for a calendar item that has long since been deleted? and yet goes off mysteriously, un-deletably, and un-editably every single ****** week !!

I have the same problem with my iPhone. I set up a recurring calendar event for every Thursday. That event is no longer happening during the summer, so I went in and chose one from the current month and selected Delete. Then it gve me two choices, one of which was to Delete All Future Events of this one, and that's what I chose. I figured, this way, I'll still be able to see the ones from the past, but won't have to see (or hear the alert) for the future ones.
The following week, my phone alerted me to the appointment, and even showed it on the initial screen, even though it wasn't in the calendar. I went in to the calendar and NOTHING was scheduled for that day. So why is this happening?
So I set up a new recurring event, for in the past, then went in and deleted all furture occurances, and it did the same thing... still alerted to an event that was no longer in the calendar.
I hope somebody else has found a fix, or at least a reason for why this is happening.

How to set displayed column width for a search help

I have created an elementary search help for a custom field with a value table behind it.
The search help functions correctly, but when displayed the column widths are all 10 characters. The user has to adjust the column to view the descriptive text.
Can anyone tell me how to set default column widths for the help?

Please open you Elementary search help and see the Column width behind the Fields of your ...there increase the width of the fields
"Activate it and refresh
reward points if it is usefull .....
Girish

How to set a song to a contact on my I phone.

How to set a song to a contact on my I phone.

You'll need to make your own ringtones within iTunes.
Instructions for a Mac: http://www.digitaltrends.com/mobile/how-to-make-ringtones-for-iphone/
Instructions for a PC: http://www.wikihow.com/Make-Ringtones-for-the-iPhone
There are other tutorials available. Those are just the first couple that came up.

How to set the connection parameters for SQL

How to set the connection parameters for SQL to access the MS Access database
Attachments:
Quick_SQL.vi ‏21 KB
Doc1.doc ‏45 KB
db1.mdb ‏112 KB

Right-click the WINDOWS desktop, choose New->Microsoft Data Link. That will bring up a dialog that allows you to configure and test your database connection. You might connect to the Access database via ODBC or directly via Jet Engine. The Jet Enginge saves you the trouble of creating an ODBC connection on your PC. After you leave the dialog, the "data link" will show up on your desktop as text file. Open it and copy-paste the connection string to your VI.
This webpage is an excellent resource for connection strings: http://www.able-consulting.com/ADO_Conn.htm
If your application requires users to change the database connection at runtime, you can also include the dialog via ActiveX (MSDASC.IDataSourceLocator).

How to set up text alerts for contacts

Similar Messages

Maybe you are looking for