How to set user parameters in transaction MD61 through a report?
Hi,
I want to set default values for 'Requirement Type' in user parameters of transaction MD61 through a report. Please help.
Thanks in Advance.
Create Variant using SHD0 and with Group and assign to particular user's
Here is the steps
Creating a Variant Group
1. Open transaction SHD0, enter the transaction code, and press enter.
2. Choose the Standard Variants tab page, and then the sub tab page Variant Groups, and enter a group name, such as GROUP_GEN
3. Choose Create. Enter a short text on the Maintain Variant Group window that appears and save the variant group.
Assigning Users
Once you have created the variant group and the relevant transaction variants with screen variants, you now need to assign users to the variant group as follows
1. Return to the Standard Variants tab page, Variant Groups sub tab page.
2. Enter the name of a user that you want to assign to this variant group, and choose Assign. A message that this user was successfully assigned to the variant group appears in the status bar. If you choose a where-used list for users, this user is displayed in the user list.
3. However, for the screen variants of the variant group that you created above to be displayed for the user, you first need to select Set Proposal. The user is assigned to the group and the associated transactions are started with the corresponding variants only once you choose the Set Proposal function.
You can use this procedure of user assignment for all other users that you want to add to the variant group
Hope this helps.
Thanks
S.N
Similar Messages
-
How to set user specific Layout for executing IW38/IW39 report.
Dear Experts,
We have 10 users seperatly, For executing IW38/39 transaction they have maintained seperate layouts for executing the reports. While saving layout they have saved the layout as 'user specific' Now some body has chage the settings.
After changing the setting all are getting same layout.
Please suggest how to set user specific layout. When user enter the IW38/39 report by default he should get his layout.
Thanks in advance.Create Variant using SHD0 and with Group and assign to particular user's
Here is the steps
Creating a Variant Group
1. Open transaction SHD0, enter the transaction code, and press enter.
2. Choose the Standard Variants tab page, and then the sub tab page Variant Groups, and enter a group name, such as GROUP_GEN
3. Choose Create. Enter a short text on the Maintain Variant Group window that appears and save the variant group.
Assigning Users
Once you have created the variant group and the relevant transaction variants with screen variants, you now need to assign users to the variant group as follows
1. Return to the Standard Variants tab page, Variant Groups sub tab page.
2. Enter the name of a user that you want to assign to this variant group, and choose Assign. A message that this user was successfully assigned to the variant group appears in the status bar. If you choose a where-used list for users, this user is displayed in the user list.
3. However, for the screen variants of the variant group that you created above to be displayed for the user, you first need to select Set Proposal. The user is assigned to the group and the associated transactions are started with the corresponding variants only once you choose the Set Proposal function.
You can use this procedure of user assignment for all other users that you want to add to the variant group
Hope this helps.
Thanks
S.N -
How to set user quotas on a certain filesystem
Hi
It may be simple and easy question but I'm really new to this
I need to know how to set user quotas on a certain file system in details
I know it can be done easily in one step in Solaris ZFS
but how is it done in Linux ?
Thanks in Advance :)See also:
How to set user quotas on a certain filesystem -
How to set user friendly URL in ApEx with OHS 11g ?
Hi,
How to set user friendly URL in ApEx with OHS 11g ?
I want change the link http://190.148.xxx.xxx:8080/pls/apex to something like http://xxx.com.
I dont want to use iFrame solution. Please suggest any other method to acheive the same.
Thanks & Regards,
RanuHi all
Iam using apex 4.0 -oracle 11g with OHS on linux os
I need to change my apex url http://x.x.x.x:xxxx/apex to http://x.com
What are the settings i need to do.
If any one knows please share the solution with me
Thanks & In advance -
How to set user preferred timezone in OBIEE for all objects.
How to set user preferred timezone in OBIEE for all objects based on users TZ(may be from @{session.timeZone}). without changing My Account -> Preferences
Check
Time Zone Specification from http://docs.oracle.com/cd/E12844_01/doc/bip.1013/e12187/T421739T481157.htm#4535403
just in case https://blogs.oracle.com/xmlpublisher/entry/how_to_keep_your_dates_from_go -
Hi all,
how to set oracle parameters in my sap 4.7 server. I need to know the procedure of parameter tune.
Regards,.
satish.
Edited by: satish k on Jun 17, 2008 5:07 AMHi
Please try this link.
http://oracle.basisconsultant.com/oracle_tuning_parameters.htm
http://www.orafaq.com/wiki/Oracle_database_Performance_Tuning_FAQ
But before doing this, check for all the probabilities as it requires lots of data and traces to do the parameter tuning. -
How to Set User Status of Sales Order at item level.
How to Set User Status of Sales Order at item level by default to 'Purchase Req Not Created' (example)while creating order. Please tell EXIT Name to be triggered & Internal table to be populated.
Thanx,
Srini
Moderator message: please do your own research before asking.
Edited by: Thomas Zloch on Feb 21, 2011 11:19 AMMathew,
Here is a document that should help you get started on enhancing 2LIS_11*
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c09d5356-d8c4-2d10-8b84-d24723fc1f0a?QuickLink=index&overridelayout=true
Good luck! -
How to set single parameters for two tables?
SELECT GM.GRNNO,GM.GRNDATE,SUM(GS.APPROVED),SM.ISSUENO,SM.ISSUEDATE,GS.ITEMCODE,SUM(SS.ISSUEDQTY)
FROM IMS_GRNM GM,IMS_GRNS GS, IMS_ISSUEM SM, IMS_ISSUES SS
WHERE GM.GRNMSERIAL=GS.GRNSSERIAL
AND SM.ISSUEMSERIAL=SS.ISSUESSERIAL
AND GM.POSTED='T'
AND SM.POSTED='T'
AND GS.ITEMCODE=SS.ITEMCODE
AND GS.ITEMCODE='01-01-02-019'
AND *******
GROUP BY GM.GRNNO,SM.ISSUENO,GM.GRNDATE,SM.ISSUEDATE,
GS.ITEMCODE ORDER BY GM.GRNDATE,SM.ISSUEDATE;
******* here i have to select the data from both the tables between two parameters named :P_1 and :P_2.
the date column in IMS_GRNM is named as GRNDATE.
the date column in IMS_ISSUEM is named as ISSUEDATE.
how to set such parameters???I think all you need is
Where table1.column1 between :p1 and :p2
and table2.column2 between :p1 and :p2 -
How to set query parameters to i5Grid
Hello Everyone,
I am working on creating i5Charts.
I mapped query template and display template to i5Chart template but I need to pass the query parameters dynamically.
How to set query parameters to i5Grid?
Pls help with syntax.
Thanks.
Regards,
MinakshiHi Minakshi,
Yes you can try the first 2 options listed by Rohit, the 3rd one however is not supported.
The below syntax should work for you:
1. gridObject.getQueryObject().setRowCount(<Value>);
2. gridObject.getQueryObject().setParameter("RowCount", <Value>);
You can check the documentation at the following link:
http|s://<host>:<port>/XMII/JSDOC/i5ChartAllClasses.html
You could also use the script assistant to check for the JS methods.
Regards,
Ria -
How to set the field non-editable in the classical report..
Hi..
How to set the field non-editable in the classical report..Hi experts,
For the component 'ICCMP_EMP_SRCH' there is a view 'BUPAEMPSEARCH' , which has 2 context nodes 'CUSTOMER' AND 'SEARCHEMPLOYEE' , i need to add the field 'NICKNAME' which is part of the 'CUSTOMER' context node on the search screen. Currrently all the fields on the screen screen are from the 'SEARCHEMPLOYEE' context node. when i did the configuration , the 'NICKNAME' field is greyed out . I have already generated the Getter ,Setter , GET_I, GET_M methods for the 'NICKNAME' field and the context node and controller class and context class are all active .
on debugging the GET_I method, i see that rv_disabled = 'TRUE' and the current = collection_wrapper->get_current( ) is returning empty value .
for this rv_disabled to be set false , the code below is not triggered since there is no value in current.
IF current->is_property_readonly(
'NICKNAME' ) = abap_false. "#EC NOTEXT
rv_disabled = 'FALSE'.
ENDIF.
when i check for other search fields of context node 'SEARCHEMPLOYEE' , all the fields are set to rv_disabled = 'FALSE'.
can anyone suggest how to approch this. iam i missing any binding between context nodes or any activations ?
The field properties are set as Input field and the display checkbox is not checked. -
How to set User-field in Plan order
Hi
could you tell me please how to set a user-filed in plan order. when I run MRP planing, I can write some data in this filed.
thanks
henryHi,
Actually these user defind fields are used/assigned in the routing.
Initially u have to define your own user defind profile through OPEC transaction.
Assign this profile in the routing.
So when ur executing Mfg activities, suppose if ur using some high materials like silver...etc.
Then after executing the particular operation some amount of silver chips or silver scrap will generated .
To keep chip/scrap qty operation and date which user defind is used.
Once u have assigned this profile to routing, then it will be automatically copied in the planned order/production order.when ur confirming the order then u have to enter the all related data.
Regards
Vijay -
How to set user command in module pool program
hello expert,
like in report: PARAMETERS: RB_SING RADIOBUTTON GROUP RAD3 DEFAULT 'X' USER-COMMAND C1.
in module pool program, hw to set user-command in screen.
srinivasPBO.
Call subscreen <SUBSCREEN NAME> Including sy-repid(PROGRAM NAME) G_DYNNR(SCREEN NUMBER'.
PAI
module user_command.
Call subscreen <subscreen name>
Module user_command.
case sy-ucomm.
when 'BUT1'.
g_dynnr = 200.
when 'BUT2'.
g_dynnr = 300.
Endcase.
end module
REPORT demo_dynpro_tabstrip_server.
CONTROLS mytabstrip TYPE TABSTRIP.
DATA: ok_code TYPE sy-ucomm,
save_ok TYPE sy-ucomm.
DATA number TYPE sy-dynnr.
mytabstrip-activetab = 'PUSH2'.
number = '0120'.
CALL SCREEN 100.
MODULE status_0100 OUTPUT.
SET PF-STATUS 'SCREEN_100'.
ENDMODULE.
MODULE cancel INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE user_command INPUT.
save_ok = ok_code.
CLEAR ok_code.
IF save_ok = 'OK'.
MESSAGE i888(sabapdocu) WITH 'MYTABSTRIP-ACTIVETAB ='
mytabstrip-activetab.
ELSE.
mytabstrip-activetab = save_ok.
CASE save_ok.
WHEN 'PUSH1'.
number = '0110'.
WHEN 'PUSH2'.
number = '0120'.
WHEN 'PUSH3'.
number = '0130'.
ENDCASE.
ENDIF.
ENDMODULE.
flow logic of the screen 100
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
CALL SUBSCREEN SUB INCLUDING SY-REPID NUMBER.
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
CALL SUBSCREEN SUB.
MODULE USER_COMMAND.
flow logic of the screen 110
PROCESS BEFORE OUTPUT.
PROCESS AFTER INPUT.
flow logic of the screen 120
PROCESS BEFORE OUTPUT.
PROCESS AFTER INPUT.
flow logic of the screen 130
PROCESS BEFORE OUTPUT.
PROCESS AFTER INPUT.
REGARDS
VASU -
i want to NEW USER excute procedure which
is other schema!
i want not to use prefix for execute procedure!
how to set NEW user privilege?
nullHi
I create a user in a Database using SQL developer,
so it is a Database User.
Now I want to give this user access to some table in
read , write mode and just let it to read some other
tables.
how i can do this ? SQL*Developer currently doesn't support security admininstration through the GUI, but you can use sqlworksheet to issue grant statements.
grant select on mytable to otheruser1;
grant select,insert,update,delete on mytable to otheruser2;
It looks like that when we create a use SQL developer
create a schema for that user , how i can make more
users without creating Schema for each of them ?
A schema is the collection of objects owned by a user. A user can exist without owning any objects.
If you are using XE, you might be better off using the XE GUI to manage this. -
How to set user settings insap
how to set default settings
n SAP Easy Access screen System -->User Profile -->Own Data. In which, in the defaults tab you can change the change the formats for the user and save the settings
actually all time's we dont have authorizations to change those..
and SU3 tcode is alos correct
Regard points if useful
Regards
sas -
How can I set the space it can occupy all the reports for a user?
This is currently not possible.
Maybe you are looking for
-
Keys on external keyboard not working
Hi folks, I recently purchased a USB keyboard (extended numeric) for my MacBook Pro, and all has been good until this morning, when the V and Y keys (both lower and upper case) have stopped working, i.e. when I try typing with them, nothing appears.
-
Spinning beachball of death issues
I have 2,250+ cards in my address book along with 9 groups - I'm starting to notice the spinning beachball of death occurring for a second or so at a time every time I edit an entry, search or move entries into groups. It occurs no matter how many ot
-
Hi all, i have this problem: I must print a graph, but this is not do correctly. I have implemented the printable interface and overrided the print method. But when i do the print action, the graph is not printed correctly. Some one can help me pleas
-
Connectivity issue with Oracle Source
Hi, Am trying to run a SSIS package to pull data from Oracle. Package was running fine from BIDS.But when i run the job from Sql Agent am getting the below error.Can you please help me on this.Am using 2012 version of SSIS Message Executed as user: A
-
TS3694 i keep getting a 1015 error?? what dose this mean
i keep getting a 1015 error?? what dose this mean and what can i do about it