How to set variant which gives date range of last month for sel.scr field

Hi All,
I want to set a variant which can do dynamic date calculation, need get last month period i.e when i select a variant it should always pick last month start date & end date for the period selection field. How can i achieve that. Please help me to know that.
Thanks in advance.
Regards
Vishal

I think in the date selection you can put in the calculations last month start date and end date, did you see what options you are getting in the variant? I am not in front of the system, so can't see.
<b>I just looked up and found that you can specify the first and last day of the last month in the variant dynamic value setting.</b> When you saving the variant, select the check box for the SELECTION VARIABLE and then click the dynamic value calculation second traffic light. Then you will get drop down where you can select the values.
Regards,
Ravi
Note : Please mark all the helpful answers
Message was edited by: Ravikumar Allampallam

Similar Messages

How do I change the default "date range" when searching in the forums?

Hi all,
New to the SAP forums... How do I change the default date range when searching in the forums? I am getting a 90 day search by default. Then I have to change it and search again. Argh!
Thanks,
--Amy Smith

Hi Amy,
the default date range cannot be changed by users. It is defined system-wide.
Regards,
Michael

How to set page number & current date in sqlplus result

how to set page number & current date in sqlplus result

Hi,
Use the TTITLE command. For example:
SET     PAGESIZE     15
TTITLE     LEFT &_date     RIGHT "Page:" FORMAT 999 sql.pno     SKIP 2
SELECT     ROWNUM
,     ename
FROM     scott.emp
;Output:
12-Jan-2011                    Page:   1
    ROWNUM ENAME
         1 SMITH
         2 ALLEN
         3 WARD
         4 JONES
         5 MARTIN
         6 BLAKE
         7 CLARK
         8 SCOTT
         9 KING
        10 TURNER
12-Jan-2011                    Page:   2
    ROWNUM ENAME
        11 ADAMS
        12 JAMES
        13 FORD
        14 MILLER
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only), and the results you want from that data. If your question is based on commonly available tables, like those in the scott schema, then you don't have to post any sample data: just post the output.
Explain how you get those results from that data.
Always say what version of Oracle (and other relevant softward, SQL*Plus in this case) you're using.

How to count the days between Date Range using OO ABAP?

hi experts,
        i want to count the days between Date Range using OO ABAP for that which class and method can i use?.
Thanks,
Mahesh.

Not sure I understand the requirement for it to be OO, but you could always write your own (i.e. use this):
REPORT zz_date_diff.
CLASS date_diff DEFINITION.
PUBLIC SECTION.
    METHODS diff IMPORTING     i_date_fm TYPE d
                               i_date_to TYPE d
                 EXPORTING     e_days    TYPE i.
ENDCLASS."
CLASS date_diff IMPLEMENTATION.
METHOD diff.
    e_days = i_date_to - i_date_fm.
ENDMETHOD."
ENDCLASS."
DATA: g_ref TYPE REF TO date_diff,
      g_days TYPE i,
      g_date_fm TYPE d VALUE '20080101',
      g_date_to TYPE d VALUE '20090101'.
START-OF-SELECTION.
CREATE OBJECT g_ref.
CALL METHOD g_ref->diff
    EXPORTING
      i_date_fm = g_date_fm
      i_date_to = g_date_to
    IMPORTING
      e_days    = g_days.
WRITE g_days.

How to set default value to date type attribute.

Hi,
How to set default value to date type attribute.
E.g I want to set u201C01/01/1999u201D to date attributes.
First i want to set value and then i want to fetch the same & want to check equals.
please suggest solution.
Regards,
Smita

Hi,
In wdinit() method u can set the date
DateFormat df = new SimpleDateFormat("MM/dd/yyyy");
Date today = Calendar.getInstance().getTime();
String reportDate = df.format(today);
wdContext.currentContextElement().setFromDate(reportDate);
Another way you have set the this formate like that
1. Create a Simple type under "Dictionaries->SimpleType" called DateFormat
2. Select the type as "date"
3. Go to the "Representation" tab and set the format as "dd/MM/yyyy" (or whatever u want, but month should be MM)
4.Bind the context attribute to the type created now.
Hope this helps u.
Best Regards
Vijay K

How to increase the number of data Business Object can pull for a report?

Hi,
I would like to ask around how to increase the number of data Business Object can pull for a report. I have a report which pulls data depending on the date range (ex. From 01/01/2007 - 01/10/2007). But, when the data that is pulled exceeds 5000, the report fails. Is there anyway to increase the number of data that BO can pull?
Thanks

Bobby,
to my knowledge we can't change that. Let me explain this, we have setting in the source system for DS default Data Transfer. there we will assign the processes. if you want to assign 4 you need to change the setting in the source system. For flat files we can change in BW System. We can maintain the setting in the Infopackage level(wht we are assigned in the Source System), but we can't change the process.
in order to check the setting in source system SBIW--> General Settings --> Control Parameters for Data Transfer.
we need to change here, this will effect to all the Data Sources. Before making changes check with your basis.
All the best.
Regards,
Nagesh Ganisetti.

How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.

How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.
When Charter Tech goes to your site, have them connect the modem up, but do not connect the modem to your iMAC or MacBook Pro. What you want to do is connect the Airport Extreme to the iMac or MacBook Pro first with the Ethernet Cable. You have to do this to configure via Airport Utility to set up the Base Station Name & Base Station Password.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple Tv, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.
WHAT TO DO IF YOUR AIRPORT EXTREME WAS PREVIOUSLY SET UP FOR USE WITH ANOTHER CARRIERS ROUTER OR MODEM.
NOTE: If you already had your Airport Extreme connected for example, I previously had ATT Uverse and the Airport Extreme was connected to the Wireless Router Model 3801HGV, I disabled the Uverse Wireless and used the Airport Extreme for the Wireless signal in bridge mode, as the Airport extreme Signal is much stronger than the Uverse router, and I was able to obtain a Wireless signal with the Airport Extreme way much better with no signal loss which was very very frustrating with the Uverse router.
Anyhow if you had it hooked up like this, now that you will be using it with the Charter ARRIS Modem TM902A, you will need to reset the Airport Extreme to clear out the old data it has in memory, with the previous set up otherwise it will not work. Trust me I spent 6 hours trying to make it work reading all Apple Support Community questions and answers relating to this type issue/problem others have been having trying to get their set up working. I tried all the tips, and I finally decided just to see if by chance I would be able to connect with someone with Charter Tech support who might be familiar with Apple to be able to assist me and by luck I did. He told me why it was not working and was all due the previous configuration with the ATT Uverse router was still in memory with the Airport Extreme. Finally it was 10:30 PM when I decided to call Charter Tech Support and I had been working on this since 3:00 pm pacific. I did not call them earlier as all the post I read said they never received any good help from Charter. After calling them I finished up by 11:00 PM and was able to finally connect Apple Tv, iMac, iPhones and Macbook Pro. We love our Apple Product and Happy all is connected with the new
Internet Provider Charter. I must say the speed is way way much better than it ever was with AT&T Uverse.
THIS IS WHAT YOU WILL NEED TO DO:
First you will need to unplug the Airport Extreme, then by taking the tip of a pen or paper clip end you need to push the reset button on the back of the Airport Extreme and hold it
down and at the same time plug the power cord back into the Airport Extreme count to 5 or 10 then release the reset button. Then once he light in front of the Airport Extreme stops blinking you need to plug the Ethernet cable from the Airport Extreme to your iMAC or Macbook Pro, and restart which ever one you have, then open the Airport Utility once it is back up. If you see airport extreme pop up with the old network name or it shows and yellow triangle click on the Airport Extreme ICON it will not let you configure it but will ask if you want to get rid of it or remove and just do it. Then Again restart your iMAC or MacBook Pro, open up Airport Utility again, and on the top left you should see under “Other Airport Base Stations” the MAC ID for the Airport Extreme.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple TV, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.

I just got a Charter Modem. Model TM822. While I was moving, my Airport Extreme was still at my old place.
I have a Linksys WRT320N I used for the initial Charter setup.
I can get my Airport to work here, but the Internet light on the Modem flashes Yellow.
Hasn't caused any issues so far but one thing I did notice.
On the Linksys there were 3 DNS servers listed.
The Airport Extreme only lists 2 and i don't see where I could add another, only change whats already there.
I tried everything above, but light on modem still flashes yellow.
I have the technicians cell phone. Told me "that shouldn't be" and gave the same advice listed above.
I'll break down and call Charter one day, see if it's on their end. NSA tracking may need a reset LMAO.

How to hightlight the new inserted data in the last low of JTable?

Could somebody help me?
i am doing the e-restaurant application system .
When press the food button, the JTable will list out the order details.
When the order is long, the scroll pane will show up.
My problem is[ b] how to hightlight the new inserted data in the last low of JTable when the food button is press every time?The scroll pane will automatically scroll down the to the new insertted data.
In the List, i get the effect like this command but in the JTable how?
list.ensureIndexIsVisible(orderDetails.getSize()-1);
thank in advance.
Below is the snapshot of my coding:
DefaultTableModel model=new DefaultTableModel(cells,columnNames);
OrderModel sorter=new OrderModel(model);
JTable table=new JTable(sorter);
JScrollPane scrollPane=new JScrollPane();
scrollPane.add(table);
Object[] object={foodName, "1",price};
model.addRow(object);
sorter.fireTableDataChanged();
sorter.fireTableStructureChanged();

The right place to ask this one is "Swing Forum.
http://forum.java.sun.com/forum.jspa?forumID=57

Which Master data Source (Attr) is available for the field VBUK-GBSTK

Hi
Which Master data Source (Attr) is available for the field VBUK-GBSTK (Document Status).
Please help me.
Thanks
Mannev.

Hi Mannev.
I don't think that you will find GBSTK in any master data source. It is however available in 2LIS_11_VASTH.
Hope it helps.
BR
Stefan

Find all Z programs which are being modified in last month

hii all,
I want to find all Z programs which are being modified in last months.Is this possible??.is there any standard or z-program which can give me the detail of all Z-program which are modified.
It is possible if i get last month Request but suppose if there are more than 100 request per month then it is not possible to go through each individual Request and find Z-programs.
Waiting for ur reply.
<removed_by_moderator> ... read [the rules|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement]!
Thaking You.
Edited by: Julius Bussche on Jul 17, 2008 7:16 PM

Hello
REPORT ZCHPROG.
TABLES: D010SINF.
DATA: PROGTXT(72) TYPE C OCCURS 0 WITH HEADER LINE.
DATA: PROGTXT1(72) TYPE C OCCURS 0 WITH HEADER LINE.
DATA:
   BEGIN OF MT OCCURS 0,
PROG LIKE D010SINF-PROG,
EDTX LIKE D010SINF-EDTX,
R3STATE LIKE D010SINF-R3STATE,
UNAM LIKE D010SINF-UNAM,
CNAM LIKE D010SINF-CNAM,
UDAT LIKE D010SINF-UDAT,
UTIME LIKE D010SINF-UTIME,
END OF MT,
N(4),
PROG(20) TYPE C,
MIN(10) TYPE C.
RANGES: UDAT1 FOR D010SINF-UDAT.
RANGES: UTIME1 FOR D010SINF-UTIME.
SELECT-OPTIONS: PROG1 FOR D010SINF-PROG,      "
                UNAM1 FOR D010SINF-UNAM,      "
                CNAM1 FOR D010SINF-CNAM.      "
PARAMETERS DEN(4) TYPE C DEFAULT '1'.
PARAMETERS SEC(5) TYPE C DEFAULT '30'.
PARAMETERS DOP AS CHECKBOX DEFAULT ' '.
START-OF-SELECTION.
IF DOP NE SPACE.
MIN = SEC * 60.
      UTIME1-SIGN = 'I'.
      UTIME1-OPTION = 'BT'.
      UTIME1-LOW = SY-UZEIT - MIN.
      UTIME1-HIGH = SY-UZEIT.
   APPEND UTIME1.
ENDIF.
      UDAT1-SIGN = 'I'.
      UDAT1-OPTION = 'BT'.
      UDAT1-LOW = SY-DATUM - DEN.
      UDAT1-HIGH = SY-DATUM.
   APPEND UDAT1.
SELECT PROG UNAM UDAT UTIME R3STATE EDTX CNAM
INTO (MT-PROG, MT-UNAM, MT-UDAT, MT-UTIME, MT-R3STATE, MT-EDTX,MT-CNAM )
         FROM D010SINF WHERE PROG IN PROG1
                                     AND UDAT IN UDAT1
                                     AND UTIME IN UTIME1
                                     AND CNAM IN CNAM1
                                     AND UNAM IN UNAM1.
APPEND MT.
ENDSELECT.
N = 1.
WRITE: / 'from', UDAT1-LOW, 'to', UDAT1-HIGH.
SORT MT BY UNAM UDAT UTIME.
LOOP AT MT.
WRITE: / MT-CNAM,MT-PROG,MT-UNAM,MT-UDAT, MT-UTIME,
MT-R3STATE, MT-EDTX.
N = N + 1.
ENDLOOP.
WRITE: / N.

My phone's earphone doesn't work which was bought from USA last month,the china apple store didn't accept the free repaired,so what can i do now?

my new iphone5s's earphone doesn't work which was bought from USA last month,probably it was cause by falling down on floor insidentally one day before I came back china , the problem is ,the china apple store didn't accept the free repaire even the phone was bought only one month age, I was so disappointed and realized the iphone 5s is so fragile,although I previous iphone4 which was also bought from USA 4 years age, it also fell down many times, it still works well now. what can i do now? send it back to USA for repairing? if like that,it will take almost two month to finish the all processes,that not only waste the time spent on the way, also waste expense on the expense,the important prlblem is, I can't use the phone during the repairing~ please give me a solution as soon as you can ,thank you very much!

You can send it to someone you know in the US to have them take it in for service or you can get on a plane and take it there yourself. You can not ship it to Apple in the US for service.

How to find, the growth of the database since last month?????

How to find the growth of the database since last month
my db name is orcl
There are multiple operations perfomed in my database.......I want to find,
how much my database is increased with the last month......
Thanks in advance.......

Define what you mean by growth?
More datafiles
More tablespaces
More table rows
More objects
More operating system space used
In what version to four decimal places?
On what operating system?

How to set the default display date of Calender prompt of SMPortal???

Good Day!!
As for as my knowledge, the default date Visible in all Calender prompt will be the
Starting Date in the Specified date range either "RelativeDateRange" or "AbosoluteDateRange".
But we have a requirement to set the default date to a date in the middle of the specified range, I don't find any option to specify in Request Offering Wizard or MP's xml file.
Our scenario is as follows,
    We are trying to customize the CSPP's request offer "Request Virtual Machine", which has a user promt to select Decommission Date for the New VM. We have configured the date prompt as Relative Date range and set the
Start date as "1 day next to user's current time" and Maximum date to "90 days after relative date". So the user will get option to select Decomm date from (1-90) days with the defalut date as 1st day next to his current
time. But our requirement is to set the default available date as 90th date in the above mentioned Relative Date Range.
     I couldn't find any option in Request offering Wizard as attached below,
      Also I couldn't even find any tag to specify the default display date in the MP's XML file as attached below. Is there any other <tag> can be included inside <Details> tag to accomplish this ??
   Is there any other way to accomplish this???
    Please advise
Thanks,
Narayanababu
Thanks and Regards, Narayana Babu

This is probably a link editor parameter, see the linker and loader guide.
Another thing you can do is write your own sbrk() that will log whenever it's called, so you can at least see how many times it's called and with what values. If you really need in-depth instrumentation, write your own heap routines and give them the same names as the CRTL routines. The linker should find yours first and route all memory operations through them. At least, that's the way it worked for me on SunOS 4.1....

How to set up row-level data security in BO XI r2

I need to get Data/Row level security into my BO XI r2 report.
A logged in user should be able to view info on pertaining to him without refreshing it.
how do i incorporate this feature into my report?
its possible to do this by setting a filter using the currentuser() function.
however it requires a refresh of the report.
hence the new user shall be able to view the data of the previous user. i need to enforce more security on the data. How do i do this???

Hi Anamika, here is a sample of what the cv_security view might look like:
create or replace view cv_security
as
select distinct sec."gid", sec."uid", sec."from", sec."to"
from
-- All users where NO LIMITS APPLY (sg.group = 1)
(select distinct
sg.group_id as "gid",
sg.user as "uid",
'----' as "from",
'ZZZZ' as "to"
from dual sr, sec_groups sg, sec_users su
where su.user(+) = sg.user
and su.status = 1
and sg.coding = 'GL'
and sg.group = 1
union all
--All users with specified sec_ranges
select distinct
sg.group_id as "gid",
sg.user as "uid",
case when sr.from is NULL
then ' '
else sr.from
end as "from",
case when sr.to is NULL
then ' '
else sr.to
end as "to"
from sec_ranges sr, sec_groups sg. sec_users su
where su.user(+) = sg.user
and su.status = 1
and sg.coding = 'GL'
and sg.group_id(+) = sr.group_id) sec
grant select on cv_security to ROLENAME
Notes about cv_security:
1) For those users with NO LIMITS APPLY (i.e. Admin staff) hard code an absolute range of RC codes from '----' to 'ZZZZ' to ensure you trap all possible alpha-numeric values.
2) For those users with NO LIMITS APPLY (i.e. Admin staff) substitute the sec_ranges table with dual
3) su.status = 1 to a filter to report on only active users
4) sg.coding = 'GL' is assessing the General Ledger coding dimension of the multi-dimensioned security matrix of our Financial system (this may not apply to you)
Responses to your questions:
Q- Does it involve self join between view cv_secured_detail? A- Yes, the 1:N cardinality is a self join between view cv_secured_detail and itself.
Q- What is the difference between steps 3) and a) below it. A- Step 3a) is simply the act of importing the cv_secured_detail Oracle View as a BO Universe Class, with it's columns known to the BO Universe as Objects
Q- Can the tables from which report data is fetched be included in the Universe? or should they be part of cv_secured_detail view.
A- I'm not sure if I understand your question, but I might phrase it another way - Once you create the cv_secured_detail view, and the Universe from this view, with the user = 'BOUSER' limiter. The universe is then used to design the CR, by virtue of it belonging to the CMS Repository, you as the report designer have to log into the CMS repository using your LDAP credentials, if a match is found against the cv_security view your data is automatically row-level secured. In outher words, whatever is declared in the view, is in the universe, and is ultimately available to the report.
Does this help?
Bill.

How to set role which can issue only one command

I am thinking about setting role, which will be allowed to issue olny one command. I have created role test. Which has the following entries in the following files:
/etc/user_attr
test::::profiles=OneCommand;type=role
/etc/security/exec_attr
OneCommand:solaris:cmd:::/tmp/data.sh:euid=0
After this I sill could issue all comands, not only test command /tmp/data.sh.
When I issued comand profiles on test role I received the following:
bash-3.00$ profiles test
OneCommand
Basic Solaris User
All
So I commented line in the /etc/policy.conf to read:
#PROFS_GRANTED=Basic Solaris User
After that, when I try to issue /tmp/data.sh command as a test role I receive the following error:
$ /tmp/data.sh
pfexec: Exec format error
Does anybody know how to set up the role which can issue only one command ? Maybe there is a way to do this in the way which wil not affect another roles (ie, not to touch /etc/policy.conf).
Best regards

RadekW wrote:
I am thinking about setting role, which will be allowed to issue olny one command. I have created role test. Which has the following entries in the following files:They will need the ability to run at least a profile shell otherwise all bets are off. So now you're down to two commands. :-)
bash-3.00$ profiles test
OneCommand
Basic Solaris User
AllFirst you need to define what already exists by default. (policy.conf)
Then you get to change those defaults or create a new default list just for test.
Then you get to add a role or profile for test that allows the execution of a profile shell and one command.
Then you should test all of the user accounts to ensure that something didn't break. This step might be a little overkill.
alan

How to set variant which gives date range of last month for sel.scr field

Similar Messages

Maybe you are looking for