How to setup a gridPane/Table with a customer header/footer

Hello -
I'm going crazy trying to figure this one out and any
help would be greatly appreciated!
I'd like to create a table with a custom 4 column
header and footer, but with a single cell as the
"main" section holding a child table(another
gridPanel, I presume). I've been using the
headerClass property on the gridPanel, but not sure
what this actually DOES. Do I need to use the
"facet" tags manually to set up a header row?
Basically, I'd like the effect of using graphics
ics to create a "framed" effect for another table.
I hope I've explained this okay :) Any
ny thoughts/help would be so appreciated!
Thanks,
TomIn JSF terms, using a Panel Grid component, you can specify a header that goes across the top of the entire grid using a "header" facet. Likewise, the "footer" facet can set a footer that goes across the entire bottom of the grid. You might want something like this:
<h:panelGrid ... columns="3">
<f:facet name="header">
    <h:outputText value="This Is The Entire Header"/>
</f:facet>
<f:facet>
    
    <h:graphicImage .../>
</f:facet>
<h:outputText value="Row 1 Column 1"/>
<h:outputText value="Row 1 Column 2"/>
<h:outputText value="Row 1 Column 3"/>
<h:outputText value="Row 2 Column 1"/>
<h:outputText value="Row 2 Column 2"/>
<h:outputText value="Row 2 Column 3"/>
</h:panelGrid>So, the "headerClass" attribute on a PanelGrid sets the CSS style class that will be used; it does not define the content of the header. Instead, you do that by embedding a component inside the facet.
Creator doesn't currently have any GUI to help you set up the header and footer facets, but you can still add them in the JSP source mode.
Craig

Similar Messages

How to populate a jsf table with an array?

I have a JSF project where I'm using a table and I would like to populate that table with some custom information without using a database. I'm trying to write my own data provider. I was wondering if anyone knows how to populate a jsf table using an array. Any help would be appreciated. Thanks.

Hey thanks for replying. I'm not quite sure what you mean, but I am using a woodstock table in Netbeans. I would love to skip writing the data provider since I've never done that before, but I'm not sure how I would go about populating the table with a regular List or Model. I have populated a JTable with my own model, but never a woodstock table. They don't seem to work the same way. Thanks for the help. I've spent hours trying to figure this out.

How to read an internal table with more than one (2 or 3) key field(s).

how to read an internal table with more than one (2 or 3) key field(s). in ecc 6.0 version

hi ,
check this..
report.
tables: marc,mard.
data: begin of itab occurs 0,
      matnr like marc-matnr,
      werks like marc-werks,
      pstat like marc-pstat,
      end of itab.
data: begin of itab1 occurs 0,
      matnr like mard-matnr,
      werks like mard-werks,
      lgort like mard-lgort,
      end of itab1.
parameters:p_matnr like marc-matnr.
select matnr
       werks
       pstat
       from marc
       into table itab
       where matnr = p_matnr.
sort itab by matnr werks.
select matnr
       werks
       lgort
       from mard
       into table itab1
       for all entries in itab
       where matnr = itab-matnr
       and werks = itab-werks.
sort itab1 by matnr werks.
loop at itab.
read table itab1 with key matnr = itab-matnr
                          werks = itab-werks.
endloop.
regards,
venkat.

How to create database and table with GUI?

How to create database and table with GUI?
for linux can do that?
or have only way to create table by use sql*plus.
everyone please help me.
thanks

go to www.orasoft.org
here is a gui tool.
null

How can I treat many tables with one handler(?) ?

Hello~
I am applying BDB to my embbeded system not rich in resource.
Some *.db files are called frequently.
But, Opening a *.db file [db_create(&dbp, NULL, 0) AND dbp->open] takes a long time in BDB
So, I loaded this functions onto a booting module to call opening functions just one time.
And all D/B handlers(?) are loaded in all run time
But, a D/B handler takes about 360Kbytes. And there are too many *.db files(10) where a table is
How can I treat many tables with one handler(?) ?
Or
If you have the most efficient way to call openning functions just one time, please tell me
Thank you

Hello,
Opening the database handles is expensive due to
opening a file on disk. Is it possible for the application
to use in-memory dbs? Otherwise is there a way for the application
to cache the DB handles and reduce the overhead associated with
opening and closing them?
Thank you,
Sandra

How to transport/move a table with data from development to Test to Production

Hi,
How to transport/move a table with data from development to Test to Production..? Export-Import a Delivery Unit does only the structure and not the data
Reg
Sri

Hi Sri,
You cannot transport Data via Transport route in HANA, you can only transport code changes/Structure via DU. For Data movement, you either have a do a export/import from a flat file or replication from a Source System to HANA.
Thanks Much,
Abhishek

How Can I Export A Table With Its Entries ( values )

Hi guys,
How can i export a table with the entries that the table is populated with ??!!
Best Regards,
Fateh

To export a table and its data you can do it a number of ways.. Do you have access to SQL Developer? If not you can do it through the APEX SQL Workshop..
Under SQL Workshop, Utilities, Data Unload, To text (or XML, whichever you are more comfortable with..).. Select your schema, click next button, select the table, click next, select the columns you want exported (select ALL ITEMS in the select List), click next, on optionally enclosed by I usually enter a " (Sometimes I have long strings in columns), click the include column names checkbox to get the column names at the top of the document, click unload data button..
To get the ddl (code to build table) Sql Workshop, utilities, generate ddl, create script, select schema, select next, click table checkbox, select next, click the checkbox of table you want to get ddl for...
Thank you,
Tony Miller
Webster, TX
There are two kinds of pedestrians -- the quick and the dead.
If this question is answered, please mark the thread as closed and assign points where earned..

How to call a method repeatedly with JSP custom tag?

This senerio is very similar to the usage of StringBuffer.
I have a problem which can be solved easily with scriptlets:
<% NameValuePair nvp = new NameValuePair(request.getQueryString()); %>
<a href="foo.html?<%=nvp.add(name1", "value1").add("name2", "value2").toString();%">">Foo</a>
<a href="bar.html?<%=new NameValuePair(request.getQueryString()).add("x", 1).add("y", 2).toString()%>">Bar</a>
But I cannot use scriplets because it's turned off. I can only use jsp custom tag / jstl. How would I implement this functionality with a custom tag? How would the JSP code look like? Our container supports JSP 2.0.
Thanks.</a>

hi,
you can do within 2 step-
1) use <%@page import="your_java_class"%>
2)use scriptlet code <%...%> and write coding in this tag.
means create instance of your java class .
<% your_java_class obj1=new your_java_class();
obj1.method_of_your_java_class();
%>or
3) you can make javabean to use method of java class.[Best option]
Thanx
Ranvijay

How can I build a table with the time values of a timer from a while loop

Hi:
I have a question concerning building a table:
Every 100ms I read a value from a sensor (while loop with a timer). I would like to build a table with the actual time and the concerning value. For example:
0msec         1V
100msec     2V
200msec     3V
300msec     4V
etc.
If I use the Express VI for building a table, I always get the date and time, but I don't need the date and the time is in the following format: HH:MMS, which is nonsensical for me as I can't differentiate within msec. Can I change the format anywhere?
Can I also save the table to a file or even to an Excelsheet? How can I do that?
Thanks for your help!

Hi Craig:
thank you very much. To solve the mystery : ) :
I want to drive a stepper motor with a specific frequency. To get the current degree value of the motor I would like to measure the current time (from the beginning of the move on). (With a formula I get the degree value out of the time)
Concurrently I would like to get data from a torque sensor and from a pressure sensor. That's why I asked you about the time and the table. The measurement should start with the movement of the motor. How can I do that? Right now I have different block diagrams (different while loops) (see attachment) and I would like to put them in one.
I haven't done the block diagram for the pressure sensor yet, so there is only the one for the torque sensor and the one for the motor.
I also would like to set a mark in the table when the voltage value of an analog input gets under a specific threshold value. Is that possible?
I'm sorry, I'm a novice in LabVIEW. But maybe you can help me.
Thank you very much!
Steffi
Attachments:
motor.vi ‏238 KB
sensor.vi ‏59 KB

How to insert into a table with a nested table which refer to another table

Hello everybody,
As the title of this thread might not be very understandable, I'm going to explain it :
In a context of a library, I have an object table about Book, and an object table about Subscriber.
In the table Subscriber, I have a nested table modeling the Loan made by the subscriber.
And finally, this nested table refers to the Book table.
Here the code concerning the creation of theses tables :
Book :
create or replace type TBook as object
number int,
title varchar2(50)
Loan :
create or replace type TLoan as object
book ref TBook,
loaning_date date
create or replace type NTLoan as table of TLoan;
Subscriber :
create or replace type TSubscriber as object
sub_id int,
name varchar2(25)
loans NTLoan
Now, my problem is how to insert into a table of TSubscriber... I tried this query, without any success...
insert into OSubscriber values
*(1, 'LEVEQUE', NTLoan(*
select TLoan(ref(b), '10/03/85') from OBook b where b.number = 1)
Of course, there is an occurrence of book in the table OBook with the number attribute 1.
Oracle returned me this error :
SQL error : ORA-00936: missing expression
00936. 00000 - "missing expression"
Thank you for your help

1) NUMBER is a reserved word - you can't use it as identifier:
SQL> create or replace type TBook as object
2 (
3 number int,
4 title varchar2(50)
5 );
6 /
Warning: Type created with compilation errors.
SQL> show err
Errors for TYPE TBOOK:
LINE/COL ERROR
0/0      PL/SQL: Compilation unit analysis terminated
3/1      PLS-00330: invalid use of type name or subtype name2) Subquery must be enclosed in parenthesis:
SQL> create table OSubscriber of TSubscriber
2 nested table loans store as loans
3 /
Table created.
SQL> create table OBook of TBook
2 /
Table created.
SQL> insert
2    into OBook
3    values(
4           1,
5           'No Title'
6          )
7 /
1 row created.
SQL> commit
2 /
Commit complete.
SQL> insert into OSubscriber
2    values(
3           1,
4           'LEVEQUE',
5           NTLoan(
6                  (select TLoan(ref(b),DATE '1985-10-03') from OBook b where b.num = 1)
7                 )
8          )
9 /
1 row created.
SQL> select *
2    from OSubscriber
3 /
    SUB_ID NAME
LOANS(BOOK, LOANING_DATE)
         1 LEVEQUE
NTLOAN(TLOAN(000022020863025C8D48614D708DB5CD98524013DC88599E34C3D34E9B9DBA1418E49F1EB2, '03-OCT-85'))
SQL> SY.

How to setup microsoft outlook 2011 with exchange server 2007

How to setup microsoft outlook 2011 for Mac with Exchange server 2007?

The folks who set up the Exchange Server should be happy to help you.

How can I represent a table with JSF ?

Hi,
I want to replace my (html) table with a JSF representation..
I found the tag <h:dataTable>, and this defines <h:column> but there is no <h:row> !!
There is an attribute rows to represent the number of rows to display, but how can I add these rows ?
Thank you

<h:panelGrid columns="2">
</h:panelGrid>will produce table with 2 columns and if provided, the next 2 columns will appear in the next row and so forth...

How can we create a table with more than 64 fields in the default DB?

Dear sirs,
I am taking part in the process of migrating a J2ee application from JBoss to SAP Server. I have imported the ejb project.
I have an entity bean with 79 CMP fields. i have created the bean and created the table for the same also. but when i tried to build the dictionary, i am getting an error message as given below,
"Dictionary Generation: DB2:checkNumberOfColumns (primary key of table IMP_MANDANT): number of columns (79) greater than allowed maximum (64) IMP_MANDANT.dtdbtable MyAtlasDictionary/src/packages"
Is it mean that we can not create tables with fields more than 64?
How can i create tables with more than 64 fields?
Kindly help,
Thankyou,
Sudheesh...

Hi,
I found a link in the help site which says its 1024 (without key 1023).
http://help.sap.com/saphelp_nw04s/helpdata/en/f6/069940ccd42a54e10000000a1550b0/content.htm
Not sure about any limit of 64 columns.
Regards,
S.Divakar

How to return an internal table with methods ?

Hi,
I am an Java programmer and very new to ABAP.
How do I return a internal table with a method? I have the table GP1_PRODUCTS and want to return a copy of this table as an internal table called PRODUCTS.
Here is my code that does not work:
class PRODUCTS definition
public
final
create public .
public section.
*"* public components of class PRODUCTS
*"* do not include other source files here!!!
methods GET_PRODUCT_LIST
    returning
      value(PRODUCTS) type GP1_PRODUCTS .
protected section.
*"* protected components of class PRODUCTS
*"* do not include other source files here!!!
private section.
*"* private components of class PRODUCTS
*"* do not include other source files here!!!
ENDCLASS.
CLASS PRODUCTS IMPLEMENTATION.
* <SIGNATURE>---------------------------------------------------------------------------------------+
* | Instance Public Method PRODUCTS->GET_PRODUCT_LIST
* +-------------------------------------------------------------------------------------------------+
* | [<-()] PRODUCTS                       TYPE        GP1_PRODUCTS
* +--------------------------------------------------------------------------------------</SIGNATURE>
method GET_PRODUCT_LIST.
DATA: it_products TYPE STANDARD TABLE OF GP1_PRODUCTS.
select * from GP1_PRODUCTS into table it_products.
PRODUCTS = it_products.
endmethod.
ENDCLASS.

You have to create a table type for your table GP1_PRODUCTS.
If you use global class (created in SE24), than:
Create a Table Type in SE11
Go to SE11, Enter a name like ZPRODUCTS in the Data Type
There will be popup when you press the Create button to decide a type. Select the Table Type
Enter GP1_PRODUCTS in the Line Type.
* method declaration
methods GET_PRODUCT_LIST
    returning
      value(PRODUCTS) type ZPRODUCTS.
If you use local class:
TYPES: ty_products type standard table of GP1_PRODUCTS..
* method declaration
methods GET_PRODUCT_LIST
    returning
      value(PRODUCTS) type ty_products
Regards,
Naimesh Patel

How to create an internal table with a types structure?

Hi experts,
I've 3 internal tables with the same structure, I think I could put a type structure and put that type inside the body of the internal data, is this possible? If true, how can I put that?
Example:
TYPES: Begin of type_s,
               pernr like pa0001-pernr,
             end of type_s.
Data: begin of itab_1 occurs 0,
¿¿¿??? reference to type_s
         end of itab_1.
Thanks a lot,
Regards,
Rebeca

Hi,
Use like this..
DATA: Begin of type_s,
pernr like pa0001-pernr,
end of type_s.
DATA: BEGIN OF ITAB_1 OCCURS 0.
INCLUDE STRUCTURE type_s.
DATA: END OF ITAB_1.
Otherwise like this.
types: Begin of type_s,
pernr like pa0001-pernr,
end of type_s.
Data: itab_1 type standard table of type_s.
Note: You have to create work area explicitly.
Like this
data wa like itab1.
Edited by: Velangini Showry Maria Kumar Bandanadham on May 26, 2009 1:04 PM

How to setup a gridPane/Table with a customer header/footer

Similar Messages

Maybe you are looking for