How to setup a user account for brtools backup

Dear Sir,
We have SAP running on Unix (AIX) and ORACLE Database . For the backup , we take the backup using brtools . At present , I am able to take the backup from the dba user account .
DBA user account (at os level) is oradv and group name is sapsys .
For taking the routine backup using brtools , I want to create a seperate user account . For this I created a user , named bkup . For this user , I have defined primery group as sapsys .
During execution of brtools command , I am getting following error :
BR0252E Function stat() failed for '/usr/sap/DEV/SYS/exe/run/brarchive' at location BrFileStatGet-1
BR0253E errno 13: Permission denied
BR0273E Determination of file status for /usr/sap/DEV/SYS/exe/run/brarchive failed
Kindly guide us , as what parameters / authorization etc need to be changed for user account bkup , so that brtools command can work without any error .
With Thanks and Rgds
Sonia Agarwal

do lsuser oradv, check it's authorizations and give same auths to new user bkup

Similar Messages

How to setup a user account?

i am new to the macbook air and have logged in and made an account but now i want to make another and have no idea how to.

http://support.apple.com/kb/PH11468
The process is the same for Mavericks.

My wife and I share the same iTunes account. How can I setup a separate account for her iPhone using my iMac?

My wife and I share the same iTunes account. How do I setup a separate account for her? Can I do it using my iMac?
Thanks

Using More than One iDevice on the Same Computer
This applies mainly to couples who are adding another device and do not want their email, messages, etc. being duplicated on both devices. To begin read: How to use multiple iPhone, iPad, or iPod devices with one computer. You need to establish a separate Apple ID and password for whomever will use the new iDevice. See Apple - My Apple ID and Frequently asked questions about Apple ID. The easiest way is to do this on the computer using iTunes: iTunes- How to set up an Apple ID within iTunes.
On the computer create a new user account for the person with the new iDevice. This will be the user account that person will always use. He/She will no longer use the other user account. This way that person will have a separate iTunes Library
Start by transferring the new device(s) to a new account along with all your data. Save any photo stream photos that you want to keep to your camera roll (unless they are already in the camera roll) by opening your Photos app, tap on Albums icon at the bottom. Now, tap on My Photo Stream album; tap Select; tap on the photos you want to select;, tap the share icon (box with upward facing arrow) in the lower left corner; then tap Save to Camera Roll.
If you are syncing notes with iCloud that you want to keep then you need to open each of your notes and email them to yourself. Later you can copy and paste the text into new notes created in your new account.
Tap on Settings > iCloud > Delete Account (only deletes it from this device, not from iCloud; the person keeping the current account will not be affected,) provide the password to turn off Find My Phone and choose Keep on My iDevice when prompted. Sign in with a different Apple ID to create your new account. Choose Merge to upload your data.
Once you are on separate accounts, you can each go to icloud.com and delete the other person's data from your account.
Note: The essence of the above was created by user, randers4. I
have made substantial changes to improve readability and syntax.

HT204053 Dear Support Team, every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud???

Dear Support Team,
Every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud?
Thanks

It is not possible to create a new iCloud account using a Windows machine. You must create the account using a Mac (10.7.5 or more) or an IOS device (iPhone etc). Once that is done you can sign into and use the account on your Windows machine.

How can i set up multiple user accounts for my new ipad mini?

How can i set up multiple user accounts for my new ipad mini?

The iPad mini is basically a one user device. There are no Accounts. You can set up restrictions so that only you can do certain things.

How to create a user account by mirroring another account in PowerShell (Trying to learn to use Powshell for some daily AD tasks intead of the GUI)

Hi,
I am trying to create user accounts via PowerShell instead of the Gui in server 2008 R2 (PowerShell 2.0).
I know how to create a user account with the following Power Shell command below is one from a dummy domain I created to practice.
PS C:\Users\Administrator> New-ADUser -SamAccountName "TestOut" -UserPrincipalNa
me "[email protected]" -GivenName "Test" -Surname "out" -DisplayName "Testou
t" -Name "Testout" -Enabled $true -Path "CN=users,DC=bwcat,DC=net,DC=int" -Accou
ntPassword (Read-Host -AsSecureString "Enter Account Password")
However when doing day to day tasks where I work normally we have a new hire, they contact IT and ask that a user account is created. I will ask who they would like to mirror.
I then would go into the gui pull up the user that they want to mirror right click him and choose copy. This would create a new user account that I would then fill out.
I am wondering if its possible to do this same thing via PowerShell, or if its not an option because it takes more work type up everything than it does to go into the gui and do it.
Anyway thanks for the help.

Hi Wilder, hi Mark,
first of all: The tutorial sources Mark posted - especially the book "Powershell 3 in A month of lunches" - are good to get a baseline start. A really great reference, especially when you try to learn it while still dealing with your daily business.
On another note, Wilder: While I fully agree that learning things sequentially is usually the best, I too jumped right in instead of learning how to walk first (though it's been some time now. Fewer years than you'd think, but still ...). So I thought I'd
give you a little aid with that function husk, so you could just stuff interesting bits into an available structure, making use of the fun tools in a useful context (It's fun fiddling around with the commands, but if you have to type in all of them manually
each time, using the GUI is often just faster. Doing fun things and being efficient with it feels even better though ...). So ... while I
do agree with yourself, learn it the Correct & Proper Way, I also do
intend to finish this little explanation about the husk, all the way to the end.
Everything below this paragraph is part of this.
function Copy-ADUser
<#
.SYNOPSIS
A brief description of the Copy-ADUser function.
.DESCRIPTION
A detailed description of the Copy-ADUser function.
.PARAMETER GivenName
A description of the GivenName parameter.
.PARAMETER Surname
A description of the Surname parameter.
.PARAMETER Template
A description of the Template parameter.
.EXAMPLE
PS C:\> Copy-ADUser -GivenName "Max" -Surname "Mustermann" -Template "Jonny.Normal"
.NOTES
Additional information about the function.
#>
[CmdletBinding()]
Param (
[Parameter(Mandatory = $true)]
[string]
$Surname,
[Parameter(Mandatory = $true)]
[string]
$GivenName,
[Parameter(Mandatory = $true)]
[string]
$Template
) # Create finished Strings
$JoinedName = $GivenName + "." + $Surname
# Create new User
$NewUser = New-ADUser -Surname $Surname -GivenName $GivenName -DisplayName "$Surname, $GivenName" -SamAccountName $JoinedName -Name "$Surename, $GivenName" -PassThru
# Copy from old User
$NewUser | Add-ADPrincipalGroupMembership -MemberOf (Get-ADPrincipalGroupMembership $Template | Where { $_.Name -ne 'Domain Users' })
# Do Whatever else you feel like doing
This is again the same function husk I posted earlier. Only this time, I filled a little logic (the pieces that were already posted in this thread). This time, I'll not only go over each part again ... I'll do it by reposting the segments and trying to show
some examples on how to modify the parts. Thus some of it will be repetitive, but this way all the info is in one spot.
Segment: Comment Based Help
<#
.SYNOPSIS
A brief description of the Copy-ADUser function.
.DESCRIPTION
A detailed description of the Copy-ADUser function.
.PARAMETER GivenName
A description of the GivenName parameter.
.PARAMETER Surname
A description of the Surname parameter.
.PARAMETER Template
A description of the Template parameter.
.EXAMPLE
PS C:\> Copy-ADUser -GivenName "Max" -Surname "Mustermann" -Template "Jonny.Normal"
.NOTES
Additional information about the function.
#>
That's the premier documentation part of a function, that teaches a user what the function does and how to use it. It's what's shown when using the Get-Help cmdlet.
Comment texts are not restricted to single lines however. For example you could replace ...
.EXAMPLE
PS C:\> Copy-ADUser -GivenName "Max" -Surname "Mustermann" -Template "Jonny.Normal"
... with ...
.EXAMPLE
PS C:\> Copy-ADUser -GivenName "Max" -Surname "Mustermann" -Template "Jonny.Normal"
Creates a new user named Max Mustermann and copies the group memberships of the already existing user Jonny Normal to this new User
... and get an explanation on what the example does when using Get-Help with the
-Detailed parameter (Explaining examples is always a good idea).
Segment: Parameter
[CmdletBinding()]
Param (
[Parameter(Mandatory = $true)]
[string]
$Surname,
[Parameter(Mandatory = $true)]
[string]
$GivenName,
[Parameter(Mandatory = $true)]
[string]
$Template
This is the segment that tells Powershell what input your function accepts. Each parameter of Copy-ADUser you set will be available in the next segment as a variable of the same name. You can add additional parameters if you need more information for your
logic. For example, let's add a parameter that allows you to specify what Organization the new user should belong to:
[CmdletBinding()]
Param (
[Parameter(Mandatory = $true)]
[string]
$Surname,
[Parameter(Mandatory = $true)]
[string]
$GivenName,
[string]
$Organization,
[Parameter(Mandatory = $true)]
[string]
$Template
That's how that would look like. You may notice that I didn't add the line with
"[Parameter(Mandatory = $true)] this time. This means you
may add the Organization parameter when calling Copy-ADUser, but you need not.
Segment: Logic
# Create new User
$NewUser = New-ADUser -Surname $Surname -GivenName $GivenName -DisplayName "$Surname, $GivenName" -SamAccountName "$GivenName.$Surename" -Name "$Surename, $GivenName" -PassThru
# Copy from old User
$NewUser | Add-ADPrincipalGroupMembership -MemberOf (Get-ADPrincipalGroupMembership $Template | Where { $_.Name -ne 'Domain Users' })
# Do Whatever else you feel like doing
This is the part of the function that does the actual work. Compared to the first husk I posted, this time there are two commands in it (and some comments). First, I create a new user, using the information passed into
the parameters -Surname and -GivenName. Then I Copy the group memberships of the user identified by the information given by the
-Template parameter.
So, let's modify it!
# Tell the user you are starting
Write-Host "Starting to create the user account for $GivenName $Surname"
# Create new User
$NewUser = New-ADUser -Surname $Surname -GivenName $GivenName -DisplayName "$Surname, $GivenName" -SamAccountName "$GivenName.$Surename" -Name "$Surename, $GivenName" -PassThru
# Tell the user you are copying Group Memberships
Write-Host "Copying the group-memberhips of $Template to $GivenName $Surname"
# Copy from old User
$NewUser | Add-ADPrincipalGroupMembership -MemberOf (Get-ADPrincipalGroupMembership $Template | Where { $_.Name -ne 'Domain Users' })
# Do Whatever else you feel like doing
Now after adding a few lines, the logic will tell us what it's doing (and do so before it
is taking action)!
Hm ... didn't we create a change in the Parameter Segment to add an -Organization parameter? Let's use it!
# If the -Organization parameter was set, the $Organization variable will be longer than 0. Thus do ...
if ($Organization.Length -gt 0)
# Tell the user you are starting
Write-Host "Starting to create the user account for $GivenName $Surname in the Organization $Organization"
# Create new User
$NewUser = New-ADUser -Surname $Surname -GivenName $GivenName -DisplayName "$Surname, $GivenName" -SamAccountName "$GivenName.$Surename" -Name "$Surename, $GivenName" -Organization $Organization -PassThru
# If the -Organization parameter was NOT set, the $Organization variable will have a length of 0. Thus the if-condition does not apply, thus we do the else block
else
# Tell the user you are starting
Write-Host "Starting to create the user account for $GivenName $Surname"
# Create new User
$NewUser = New-ADUser -Surname $Surname -GivenName $GivenName -DisplayName "$Surname, $GivenName" -SamAccountName "$GivenName.$Surename" -Name "$Surename, $GivenName" -PassThru
# Tell the user you are copying Group Memberships
Write-Host "Copying the group-memberhips of $Template to $GivenName $Surname"
# Copy from old User
$NewUser | Add-ADPrincipalGroupMembership -MemberOf (Get-ADPrincipalGroupMembership $Template | Where { $_.Name -ne 'Domain Users' })
# Do Whatever else you feel like doing
There! Now we first check whether the -Organization parameter was set (it's not mandatory after all, so you can skip it). If it
was set, do whatever is in the curly braces after if (...). However, if it wasn't set, do whatever is in the curly braces after
else.
And that concludes my "minor" (and hopefully helpful) tutorial on how to use the function husk I posted :)
With this, whenever you find another cool command that helps you in the user creation process, you can simply add it, similar to what I did in these examples.
And if it all didn't make much sense, go through the tutorials in proper order and come back - it'll make much more sense then.
Cheers and good luck with PowerShell,
Fred
There's no place like 127.0.0.1

I have created separate user accounts for my 2 boys on my macbook. How do i get my itunes library onto their new ipods?

I have created separate user accounts for my 2 boys on my macbook. How do i get my itunes library onto their new ipods?

They can't. Which came first - the chicken or the egg? Actually, that's a bad comparison but a sync must come first.
The library is actually part of iTunes and it contains everything. iTunes is then configured so that you (or they) determine which portion of everything will be synced to each iPod (identified by a unique name, see below for an example of an iPod and an iPad). iTunes can't make that decision until AFTER it knows which iPods exist.
By the way, I (you, they) can very easily change the name of each device to whatever I (you, they) wish to call it.

How to setup the email application for my gmail account in firefox os.. I need the configuration steps for gmail.

I don't know how to setup the email account sync in firefox os.. can anyone explain the steps to be followed for setting up a gmail account...

hello Dhanraj K, for gmail accounts there shouldn't be much manual configuration required. please try to set it up like described in [[Add an email account to the Mail app in Firefox OS]]

My ipohne and ipad use the same account. My wife wants to setup her own account for the ipad and utilize family sharing. How can I change the account in my ipad?

My ipohne and ipad use the same account. My wife wants to setup her own account for the ipad and utilize family sharing. How can I change the account in my ipad?

Hi,
Are you talking about changing the Apple ID used for purchases in iTunes? If so go to 'Settings->iTunes & App Store-> then 'tap' on the Apple ID that appears and click Sign Out on menu that appears. You can now login with a different Apple ID.
Regards,
Steve

Help-I want to move my stuff out of admin user account to a non-admin user account for security. How can this be done?

So... I have amassed loads of documents, videos, music, photos, etc. onto my MacBook Pro all under the admin user account I set up for myself. I am the only one who uses the MacBook. I now work virtually and am online at different free wifi spots, and I want to access all of my stuff under a non-admin user account for security reasons.
I attempted to uncheck the "allow this user to administer this computer" box under my admin user account, but it is greyed out and I cannot.
Is there an easier way to fix this than backing up all of my stuff and then moving it to a non-admin account?

There is only one solution: create a new Standard user account and set it as your auto login account, if you use that feature.
Using what you describe is mostly a false sense of security. Were someone to hack into the computer they could hack into the standard account, so you would not wish to keep any sensitive data in that account. Other things to consider:
Turn on your Firewall in Security & Privacy preference panel.
Use software to mask your online presence such as ProxyCap 2.03, MacProxy, Proxifier, or Hotspot Shield.

File permissions - how to edit a user account

file permissions - how to edit a user account that is creating files with permissions that are not wanted anymore.
i understand how to reset permissions on files or folders, but i do not understand how to reset the permissions a user is "creating".
ie, each time this user creates a file, the file needs to be manually edited for its permissions. so i need to edit the user's settings, but i can't find where to do that.
this is a home office setup. we have two users with admin privileges. our imac is acting as a server of sorts - it holds common files that need to be edited by both users. the other user is typically working on shared files from a macbook over wifi.
osx 10.6.8
any help is greatly appreciated - thanks up front!
adam

Király wrote:
Changing the umask does not produce reliable results. Many apps, including Apple's own Finder, will override any custom umask setting and apply the OS X standard set of read and write for the creator, and read only for group and others. This is true even in Snow Leopard
I cannot argue with you, because I've never tried or tested it myself. However, this KB article
<http://support.apple.com/kb/HT2202>
states the opposite:
"In Mac OS X v10.5.3 and later, you can create the file /etc/launchd-user.conf with the contents "umask nnn". […]
This will set the user's umask for all applications they launch, such as Finder, TextEdit, or Final Cut Pro, and control the permissions set on new files created by any of these applications."

I want to set up a user account for my 3 year old, so when she goes into her account, only her games show up on the desktop

I am trying to set up a user account for my 3 year old so that when she goes into her account, only her games show up on her desktop. How??

yes -- I think I am setting it up right, but when I go into her account to check it, it doesn't work.

My computer was stolen a few months ago i now have a new laptop with new id but don't know how to retrieve my itunes account for i forgot my old id. How can i get to my account?

My computer was stolen several months ago and I now have a new laptop with a new id but I do not know how to retrieve my itunes account for i have forgotten my password and user id. I need a way to get into my old account.

http://iforgot.apple.com
Regards.

How to setup a default direction for new divs in fluid grid layout in dreamweaver?

Hi,
how to setup a default direction for new divs in fluid grid layout in dreamweaver? I am an RTL interface user, I need my new divs to be inserted from right to left not Left to Right! could it be in dreamweaver?
Thanks.

This may get me into strife, but my experience is that you are better off finding another platform for your RWD.
The framework that I tend to use is by Zub-Foundation http://foundation.zurb.com/.
A commercial product that I have come to appreciate can be found here http://www.projectseven.com/products/tools/composer/index.htm. Please do not mention me if you happen to choose this product.

How can I delete user account picture in Windows 8?

I have set my account picture, but now want to delete the pic and back to the default.
How can I do it?

Hello,
The userpic, the image tiles used for your account picture, is located, in different resolutions, in the following folder: C:\Users\Public\AccountPictures\%UserAccountSecurityIdentifier%
where %UserAccountSecurityIdentifier% is a placeholder for the Security IDentifier (SID) assigned by the operating system or domain controller to your user account.
Here is how it looks like:
NOTE: If your are using multiple account for login to your computer, like local Security Account Manager (SAM) account (standard account created and stored on your local PC in NTFS), your Microsoft Account (the one using internet account name provided
by Microsoft such as [email protected],
[email protected]), or an Active Directory account, please open root C:\Users\Public\AccountPictures\ folder and browse to the folder with the name of the SID assigned to your user account for which you want to change the user picture.
To find out what SID refers to what user account name used on your PC, proceed with the following:
Start the elevated command prompt by pressing WindowsKey+Q and typing
cmd, then hitting Enter.
At the command prompt type: wmic useraccount get name,sid and press
Enter.
This will return a table with all user accounts registered on this computer (that is those who had once logged onto this PC) and their corresponding SIDs.
Now lookup this registry key:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\AccountPicture\Users
And locate the subkey (named correspondingly to the desired SID), then remove REG_SZ values that contain paths to the userpic images to remove traces of userpics.
WARNING: Please create new system restore point before making this registry change!
Hope this helps.
Well this is the world we live in And these are the hands we're given...

How to setup a user account for brtools backup

Similar Messages

Maybe you are looking for